- 02 Oct, 2018 21 commits
-
-
Jian Shen authored
This patch adds switch for flow director with ethtool command Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jian Shen authored
This patch removes all flow director rules when unload hns3 driver. Signed-off-by:
-
Jian Shen authored
When doing reset, remove all entries in TCAM block, and keep flow director rules list. After finishing reset, restore all entries. Signed-off-by:
-
Jian Shen authored
This patch adds support for querying rule number and rule details by ethtool commands. Signed-off-by:
-
Jian Shen authored
This patch adds support for add and delete rule by ethtool commands. HNS3 driver supports several flow types, include ETHER_FLOW, IP_USER_FLOW, TCP_V4_FLOW, UDP_V4_FLOW, SCTP_V4_FLOW, IPV6_USER_FLOW, TCP_V6_FLOW, UDP_V6_FLOW and SCTP_V6_FLOW. Signed-off-by:
-
Jian Shen authored
Each flow director rule consists of input key and action. The input key is the condition for matching, includes tuples of L2/L3/L4 header. Action is the behaviour when a packet matches with the input key, such as drop the packet, or forward to a specified queue. The input key is stored in the tcam blocks, Each bit of input key can be masked. Signed-off-by:
-
Jian Shen authored
Flow director is a new feature supported by hardware with revision 0x21. This patch adds flow direcor initialization for each PF. It queries flow director mode and tcam resource from firmware, selects tuples used for input key. Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== Continue towards using linkmode in phylib These patches contain some further cleanup and helpers, and the first real patch towards using linkmode bitmaps in phylink. The macro magic in the RFC version has been replaced with run time initialisation. ==================== Signed-off-by: -
Andrew Lunn authored
This is one step in allowing phylib to make use of link_mode bitmaps, instead of u32 for supported and advertised features. Convert the phy drivers to use bitmaps to indicates the features they support. Build bitmap equivalents of the u32 values at runtime, and have the drivers point to the appropriate bitmap. These bitmaps are shared, and we don't want a driver to modify them. So mark them __ro_after_init. Within phylib, the features bitmap is currently turned back into a u32. This will be removed once the whole of phylib, and the drivers are converted to use bitmaps. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrew Lunn authored
The macro PHY_GBIT_FEAUTRES needs to change into a bitmap in order to support link_modes. Remove its use from xgde by replacing it with its definition. Probably, the current behavior is wrong. It probably should be ANDing not assigning. Signed-off-by:
-
Andrew Lunn authored
Add helpers which take a linkmode rather than a u32 ethtool for advertising settings. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Andrew Lunn authored
Add a helper to convert the local advertising to an LCL capabilities, which is then used to resolve pause flow control settings. Signed-off-by:
-
Andrew Lunn authored
The phy_mii_ioctl can be used to write a value into the MII_ADVERTISE register in the PHY. Since this changes the state of the PHY, we need to make the same change to phydev->advertising. Add a helper which can convert the register value to a linkmode. Signed-off-by:
-
Andrew Lunn authored
Add phydev_info() and make use of it within the phy drivers and core code. Signed-off-by:
-
Andrew Lunn authored
Not all new style LINK_MODE bits can be converted into old style SUPPORTED bits. We need to warn when such a conversion is attempted. Add a helper for this. Convert all pr_warn() calls to phydev_warn() where possible. Signed-off-by:
-
Andrew Lunn authored
phylink has some useful helpers to working with linkmode bitmaps. Move them to there own header so other code can use them. Signed-off-by:
-
Jakub Kicinski authored
Reserve two TLV types for feature development, and warn in the driver if they ever leak into production. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Moritz Fischer authored
Address compiler warning reported by kbuild autobuilders when building for i386 as a result of dma_addr_t size on different architectures. warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Fixes: 7e8d5755 ("net: nixge: Add support for 64-bit platforms") Signed-off-by:
Moritz Fischer <mdf@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Soheil Hassas Yeganeh authored
When SKBs are coalesced, we can have SKBs with different frag sizes. Some with PAGE_SIZE and some not with PAGE_SIZE. Since recv_skip_hint is always set to the full SKB size, it can overestimate the amount that should be read using normal read for coalesced packets. Change the recv_skip_hint so that it only includes the first frags that are not of PAGE_SIZE. Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Soheil Hassas Yeganeh authored
When we have less than PAGE_SIZE of data on receive queue, we set recv_skip_hint to 0. Instead, set it to the actual number of bytes available. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2018-10-01 1) Make xfrmi_get_link_net() static to silence a sparse warning. From Wei Yongjun. 2) Remove a unused esph pointer definition in esp_input(). From Haishuang Yan. 3) Allow the NIC driver to quietly refuse xfrm offload in case it does not support it, the SA is created without offload in this case. From Shannon Nelson. Please pull or let me know if there are problems. ==================== Signed-off-by:
-
- 01 Oct, 2018 19 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5e-updates-2018-10-01 This series includes updates to mlx5e ethernet netdevice driver: From Or Gerlitz: 1) Support masks for l3/l4 filters in ethtool flow steering 2) Report checksum unnecessary also when the L3 checksum flag on the cqe is set and there's no L4 header 3) Allow reporting of checksum unnecessary, using an ethtool private flag. From Gavi Teitz and Or, VF representors netdevs performance improvements 4) Allow striding RQ in VF representor and bigger RQ size, ~3X performance improvement 5) Enable stateless offloads for VF representor, csum and TSO, 1.5X performance improvement 6) RSS Support for VF representors 6.1) Allow flow table destination fir VF representor steering rule. 6.2) Create RSS flow table per representor netdev 6.3) Expose mlx5e RSS ethtool to be used by representor netdevs 6.4) Enable multi-queue and RSS for VF representors, using mlx5e existing infrastructure for managing a multi-queue RX RSS tables. From Alaa Hleihel: 7) Cache the system image guid, The system image guid is a read-only field Read this once and save it on the core device. ==================== Signed-off-by: -
Yuchung Cheng authored
Previously receiver buffer auto-tuning starts after receiving one advertised window amount of data. After the initial receiver buffer was raised by patch a337531b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB"), the reciver buffer may take too long to start raising. To address this issue, this patch lowers the initial bytes expected to receive roughly the expected sender's initial window. Fixes: a337531b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB") Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2018-10-01 This series contains updates to ice driver only. Anirudh provides several changes to "prep" the driver for upcoming features. Specifically, the functions that are used for PF VSI/netdev setup will also be used in SR-IOV support and to allow the reuse of these functions, code needs to move. Dave provides the only other change in the series, updates the driver to protect the reset patch in its entirety. This is done by adding the various bit checks to determine if a reset is scheduled/initiated and whether it came from the software or firmware. ==================== Signed-off-by: -
Dave Ertman authored
Currently, there is no bit, or set of bits, that protect the entirety of the reset path. If the reset is originated by the driver, then the relevant one of the following bits will be set when the reset is scheduled: __ICE_PFR_REQ __ICE_CORER_REQ __ICE_GLOBR_REQ This bit will not be cleared until after the rebuild has completed. If the reset is originated by the FW, then the first the driver knows of it will be the reception of the OICR interrupt. The __ICE_RESET_OICR_RECV bit will be set in the interrupt handler. This will also be the indicator in a SW originated reset that we have completed the pre-OICR tasks and have informed the FW that a reset was requested. To utilize these bits, change the function: ice_is_reset_recovery_pending() to be: ice_is_reset_in_progress() The new function will check all of the above bits in the pf->state and will return a true if one or more of these bits are set. Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anirudh Venkataramanan authored
This patch completes the code move out of ice_main.c The following top level functions and related dependency functions) were moved to ice_lib.c: ice_vsi_setup ice_vsi_cfg_tc The following functions were made static again: ice_vsi_setup_vector_base ice_vsi_alloc_q_vectors ice_vsi_get_qs void ice_vsi_map_rings_to_vectors ice_vsi_alloc_rings ice_vsi_set_rss_params ice_vsi_set_num_qs ice_get_free_slot ice_vsi_init ice_vsi_alloc_arrays Signed-off-by:
-
Anirudh Venkataramanan authored
This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_setup_vector_base ice_vsi_alloc_q_vectors ice_vsi_get_qs The following functions were made static again: ice_vsi_free_arrays ice_vsi_clear_rings Also, in this patch, the netdev and NAPI registration logic was de-coupled from the VSI creation logic (ice_vsi_setup) as for SR-IOV, while we want to create VF VSIs using ice_vsi_setup, we don't want to create netdevs. Signed-off-by:
-
Anirudh Venkataramanan authored
This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_clear ice_vsi_close ice_vsi_free_arrays ice_vsi_map_rings_to_vectors Signed-off-by:
-
Anirudh Venkataramanan authored
This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_alloc_rings ice_vsi_set_rss_params ice_vsi_set_num_qs ice_get_free_slot ice_vsi_init ice_vsi_clear_rings ice_vsi_alloc_arrays Signed-off-by:
-
Anirudh Venkataramanan authored
This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_delete ice_free_res ice_get_res ice_is_reset_recovery_pending ice_vsi_put_qs ice_vsi_dis_irq ice_vsi_free_irq ice_vsi_free_rx_rings ice_vsi_free_tx_rings ice_msix_clean_rings Signed-off-by:
-
Anirudh Venkataramanan authored
This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_start_rx_rings ice_vsi_stop_rx_rings ice_vsi_stop_tx_rings ice_vsi_cfg_rxqs ice_vsi_cfg_txqs ice_vsi_cfg_msix Signed-off-by:
-
Anirudh Venkataramanan authored
The functions that are used for PF VSI/netdev setup will also be used for SR-IOV support. To allow reuse of these functions, move these functions out of ice_main.c to ice_common.c/ice_lib.c This move is done across multiple patches. Each patch moves a few functions and may have minor adjustments. For example, a function that was previously static in ice_main.c will be made non-static temporarily in its new location to allow the driver to build cleanly. These adjustments will be removed in subsequent patches where more code is moved out of ice_main.c In this particular patch, the following functions were moved out of ice_main.c: int ice_add_mac_to_list ice_free_fltr_list ice_stat_update40 ice_stat_update32 ice_update_eth_stats ice_vsi_add_vlan ice_vsi_kill_vlan ice_vsi_manage_vlan_insertion ice_vsi_manage_vlan_stripping Signed-off-by:
-
Alaa Hleihel authored
The system image guid is a read-only field which is used by the TC offloads code to determine if two mlx5 devices belong to the same ASIC while adding flows. Read this once and save it on the core device rather than querying each time an offloaded flow is added. Signed-off-by:
Alaa Hleihel <alaa@mellanox.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Or Gerlitz authored
Currently we practically never report checksum unnecessary, because for all IP packets we take the checksum complete path. Enable non-default runs with reprorting checksum unnecessary, using an ethtool private flag. This can be useful for performance evals and other explorations. Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Or Gerlitz authored
We can report checksum unnecessary also when the L3 checksum flag on the cqe is set and there's no L4 header. Signed-off-by:
-
Gavi Teitz authored
Added ethtool control to the representors for setting and querying the ring params. Signed-off-by:Gavi Teitz <gavi@mellanox.com>
-
Gavi Teitz authored
Increased the amount of channels the representors can open to be the amount of CPUs. The default amount opened remains one. Used the standard NIC netdev functions to: * Set RSS params when building the representors' params. * Setup an indirect TIR and RQT for the representors upon initialization. * Create a TTC flow table for the representors' indirect TIR (when creating the TTC table, mlx5e_set_ttc_basic_params() is not called, in order to avoid setting the inner_ttc param, which is not needed). Added ethtool control to the representors for setting and querying the amount of open channels. Additionally, included logic in the representors' ethtool set channels handler which controls a representor's vport rx rule, so that if there is one open channel the rx rule steers traffic to the representor's direct TIR, whereas if there is more than one channel, the rx rule steers traffic to the new TTC flow table. Signed-off-by:
-
Or Gerlitz authored
Towards enabling RSS for the vport representors, expose the functions for querying the rss hash key size and indirection table size via ethtool. Signed-off-by:
-
Gavi Teitz authored
Towards enabling RSS for the vport representors, extract the procedure for building a device's RSS params, and expose the function. Signed-off-by:
-
Or Gerlitz authored
Change the driver functions that deal with creating indirect tirs to get a flag telling if inner ttc is desired. A pre-step for enabling rss on the vport representors, where inner ttc is not needed. Signed-off-by:
-
