- 23 Feb, 2012 2 commits
-
-
Nikolaus Schulz authored
By hwmon sysfs interface convention, setting pwm_enable to zero sets a fan to full speed. In the f75375s driver, this need be done by enabling manual fan control, plus duty mode for the F875387 chip, and then setting the maximum duty cycle. Fix a bug where the two necessary register writes were swapped, effectively discarding the setting to full-speed. Signed-off-by:
Nikolaus Schulz <mail@microschulz.de> Cc: Riku Voipio <riku.voipio@iki.fi> Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com>
-
Guenter Roeck authored
An error while creating sysfs attribute files in the driver's probe function results in an error abort, but already created files are not removed. This patch fixes the problem. Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@vger.kernel.org # 3.0+ Cc: Dirk Eibach <eibach@gdsys.de> Acked-by:
Jean Delvare <khali@linux-fr.org>
-
- 21 Feb, 2012 2 commits
-
-
Chris D Schimp authored
Initialize PPR register for both channels, and set correct PPR register bits. Also remove unnecessary variable initializations. Signed-off-by:
Chris D Schimp <silverchris@gmail.com> [guenter.roeck@ericsson.com: Merged two patches into one] Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@vger.kernel.org # 3.0+ Acked-by:
Roland Stigge <stigge@antcom.de>
-
Chris D Schimp authored
RPM calculation from tachometer value does not depend on PPR. Also, do not report negative RPM values. Signed-off-by:
Chris D Schimp <silverchris@gmail.com> [guenter.roeck@ericsson.com: do not report negative RPM values] Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@vger.kernel.org # 3.0+ Acked-by:
Roland Stigge <stigge@antcom.de>
-
- 18 Feb, 2012 12 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
These are the bug fixes that have accumulated since 3.3-rc3 in arm-soc. The majority of them are regression fixes for stuff that broke during the merge 3.3 window. The notable ones are: * The at91 ata drivers both broke because of an earlier cleanup patch that some other patches were based on. Jean-Christophe decided to remove the legacy at91_ide driver and fix the new-style at91-pata driver while keeping the cleanup patch. I almost rejected the patches for being too late and too big but in the end decided to accept them because they fix a regression. * A patch fixing build breakage from the sysdev-to-device conversion colliding with other changes touches a number of mach-s3c files. * b0654037 "ARM: orion: Fix Orion5x GPIO regression from MPP cleanup" is a mechanical change that unfortunately touches a lot of lines that should up in the diffstat. * tag 'fixes-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) ARM: at91: drop ide driver in favor of the pata one pata/at91: use newly introduced SMC accessors ARM: at91: add accessor to manage SMC ARM: at91:rtc/rtc-at91sam9: ioremap register bank ARM: at91: USB AT91 gadget registration for module ep93xx: fix build of vision_ep93xx.c ARM: OMAP2xxx: PM: fix OMAP2xxx-specific UART idle bug in v3.3 ARM: orion: Fix USB phy for orion5x. ARM: orion: Fix Orion5x GPIO regression from MPP cleanup ARM: EXYNOS: Add cpu-offset property in gic device tree node ARM: EXYNOS: Bring exynos4-dt up to date ARM: OMAP3: cm-t35: fix section mismatch warning ARM: OMAP2: Fix the OMAP2 only build break seen with 2011+ ARM tool-chains ARM: tegra: paz00: fix wrong UART port on mini-pcie plug ARM: tegra: paz00: fix wrong SD1 power gpio i2c: tegra: Add devexit_p() for remove ARM: EXYNOS: Correct M-5MOLS sensor clock frequency on Universal C210 board ARM: EXYNOS: Correct framebuffer window size on Nuri board ARM: SAMSUNG: Fix missing api-change from subsys_interface change ARM: EXYNOS: Fix "warning: initialization from incompatible pointer type" ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
1) VETH_INFO_PEER netlink attribute needs to have it's size validated, from Thomas Graf. 2) 'poll' module option of bnx2x driver crashes the machine, just remove it. From Michal Schmidt. 3) ks8851_mll driver reads the irq number from two places, but only initializes one of them, oops. Use only one location and fix this problem, from Jan Weitzel. 4) Fix buffer overrun and unicast sterring bugs in mellanox mlx4 driver, from Eugenia Emantayev. 5) Swapped kcalloc() args in RxRPC and mlx4, from Axel Lin. 6) PHY MDIO device name regression fixes from Florian Fainelli. 7) If the wake event IRQ line is different from the netdevice one, we have to properly route it to the stmmac interrupt handler. From Francesco Virlinzi. 8) Fix rwlock lock initialization ordering bug in mac80211, from Mohammed Shafi Shajakhan. 9) TCP lost_cnt can get out of sync, and in fact go negative, in certain circumstances. Fix the way we specify what sequence range to operate on in tcp_sacktag_one() to fix this bug. From Neal Cardwell. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) net/ethernet: ks8851_mll fix irq handling veth: Enforce minimum size of VETH_INFO_PEER stmmac: update the driver version to Feb 2012 (v2) stmmac: move hw init in the probe (v2) stmmac: request_irq when use an ext wake irq line (v2) stmmac: do not discard frame on dribbling bit assert ipheth: Add iPhone 4S mlx4: add unicast steering entries to resource_tracker mlx4: fix QP tree trashing mlx4: fix buffer overrun 3c59x: shorten timer period for slave devices netpoll: netpoll_poll_dev() should access dev->flags RxRPC: Fix kcalloc parameters swapped bnx2x: remove the 'poll' module option tcp: fix tcp_shifted_skb() adjustment of lost_cnt_hint for FACK ks8851: Fix NOHZ local_softirq_pending 08 warning bnx2x: fix bnx2x_storm_stats_update() on big endian ixp4xx-eth: fix PHY name to match MDIO bus name octeon: fix PHY name to match MDIO bus name fec: fix PHY name to match fixed MDIO bus name ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Fixes a bootstrapping issue for some registers when a less commonly used method for register cache initialisation is used. Only affects a fairly small proportion of users that both don't use explicit register defaults and do use the cache. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Fix cache defaults initialization from raw cache defaults
-
Linus Torvalds authored
Merge tag 'ecryptfs-3.3-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Fixes maximum filename length and filesystem type reporting in statfs() calls and also fixes stale inode mode bits on eCryptfs inodes after a POSIX ACL was set on the lower filesystem's inode. * tag 'ecryptfs-3.3-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: ecryptfs: remove the second argument of k[un]map_atomic() eCryptfs: Copy up lower inode attrs after setting lower xattr eCryptfs: Improve statfs reporting
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
pinctrl fixes for v3.3 * tag 'pinctrl-for-torvalds-20120216' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: restore pin naming
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Here are a few more fixes for powerpc. Some are regressions, the rest is simple/obvious/nasty enough that I deemed it good to go now. Here's also step one of deprecating legacy iSeries support: we are removing it from the main defconfig. Nobody seems to be using it anymore and the code is nasty to maintain, (involves horrible hacks in various low level areas of the kernel) so we plan to actually rip it out at some point. For now let's just avoid building it by default. Stephen will proceed to do the actual removal later (probably 3.4 or 3.5). * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/perf: power_pmu_start restores incorrect values, breaking frequency events powerpc/adb: Use set_current_state() powerpc: Disable interrupts early in Program Check powerpc: Remove legacy iSeries from ppc64_defconfig powerpc/fsl/pci: Fix PCIe fixup regression powerpc: Fix kernel log of oops/panic instruction dump
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pciLinus Torvalds authored
One regression fix for SR-IOV on PPC and a couple of misc fixes from Yinghai. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: PCI: Fix pci cardbus removal PCI: set pci sriov page size before reading SRIOV BAR PCI: workaround hard-wired bus number V2
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
3 radeon fixes, I have some exynos fixes to push later but I'll queue them separately once I've looked them over a bit. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: fix MSI re-arm on rv370+ drm/radeon/kms/atom: bios scratch reg handling updates drm/radeon/kms: drop lock in return path of radeon_fence_count_emitted.
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sha512 - use standard ror64()
-
Linus Torvalds authored
After all the FPU state cleanups and finally finding the problem that caused all our FPU save/restore problems, this re-introduces the preloading of FPU state that was removed in commit b3b0870e ("i387: do not preload FPU state at task switch time"). However, instead of simply reverting the removal, this reimplements preloading with several fixes, most notably - properly abstracted as a true FPU state switch, rather than as open-coded save and restore with various hacks. In particular, implementing it as a proper FPU state switch allows us to optimize the CR0.TS flag accesses: there is no reason to set the TS bit only to then almost immediately clear it again. CR0 accesses are quite slow and expensive, don't flip the bit back and forth for no good reason. - Make sure that the same model works for both x86-32 and x86-64, so that there are no gratuitous differences between the two due to the way they save and restore segment state differently due to architectural differences that really don't matter to the FPU state. - Avoid exposing the "preload" state to the context switch routines, and in particular allow the concept of lazy state restore: if nothing else has used the FPU in the meantime, and the process is still on the same CPU, we can avoid restoring state from memory entirely, just re-expose the state that is still in the FPU unit. That optimized lazy restore isn't actually implemented here, but the infrastructure is set up for it. Of course, older CPU's that use 'fnsave' to save the state cannot take advantage of this, since the state saving also trashes the state. In other words, there is now an actual _design_ to the FPU state saving, rather than just random historical baggage. Hopefully it's easier to follow as a result. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This moves the bit that indicates whether a thread has ownership of the FPU from the TS_USEDFPU bit in thread_info->status to a word of its own (called 'has_fpu') in task_struct->thread.has_fpu. This fixes two independent bugs at the same time: - changing 'thread_info->status' from the scheduler causes nasty problems for the other users of that variable, since it is defined to be thread-synchronous (that's what the "TS_" part of the naming was supposed to indicate). So perfectly valid code could (and did) do ti->status |= TS_RESTORE_SIGMASK; and the compiler was free to do that as separate load, or and store instructions. Which can cause problems with preemption, since a task switch could happen in between, and change the TS_USEDFPU bit. The change to TS_USEDFPU would be overwritten by the final store. In practice, this seldom happened, though, because the 'status' field was seldom used more than once, so gcc would generally tend to generate code that used a read-modify-write instruction and thus happened to avoid this problem - RMW instructions are naturally low fat and preemption-safe. - On x86-32, the current_thread_info() pointer would, during interrupts and softirqs, point to a *copy* of the real thread_info, because x86-32 uses %esp to calculate the thread_info address, and thus the separate irq (and softirq) stacks would cause these kinds of odd thread_info copy aliases. This is normally not a problem, since interrupts aren't supposed to look at thread information anyway (what thread is running at interrupt time really isn't very well-defined), but it confused the heck out of irq_fpu_usable() and the code that tried to squirrel away the FPU state. (It also caused untold confusion for us poor kernel developers). It also turns out that using 'task_struct' is actually much more natural for most of the call sites that care about the FPU state, since they tend to work with the task struct for other reasons anyway (ie scheduling). And the FPU data that we are going to save/restore is found there too. Thanks to Arjan Van De Ven <arjan@linux.intel.com> for pointing us to the %esp issue. Cc: Arjan van de Ven <arjan@linux.intel.com> Reported-and-tested-by:
Raphael Prevost <raphael@buro.asia> Acked-and-tested-by:
Suresh Siddha <suresh.b.siddha@intel.com> Tested-by:
Peter Anvin <hpa@zytor.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 17 Feb, 2012 1 commit
-
-
Linus Torvalds authored
The AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception is pending. In order to not leak FIP state from one process to another, we need to do a floating point load after the fxsave of the old process, and before the fxrstor of the new FPU state. That resets the state to the (uninteresting) kernel load, rather than some potentially sensitive user information. We used to do this directly after the FPU state save, but that is actually very inconvenient, since it (a) corrupts what is potentially perfectly good FPU state that we might want to lazy avoid restoring later and (b) on x86-64 it resulted in a very annoying ordering constraint, where "__unlazy_fpu()" in the task switch needs to be delayed until after the DS segment has been reloaded just to get the new DS value. Coupling it to the fxrstor instead of the fxsave automatically avoids both of these issues, and also ensures that we only do it when actually necessary (the FP state after a save may never actually get used). It's simply a much more natural place for the leaked state cleanup. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 16 Feb, 2012 14 commits
-
-
Linus Torvalds authored
Yes, taking the trap to re-load the FPU/MMX state is expensive, but so is spending several days looking for a bug in the state save/restore code. And the preload code has some rather subtle interactions with both paravirtualization support and segment state restore, so it's not nearly as simple as it should be. Also, now that we no longer necessarily depend on a single bit (ie TS_USEDFPU) for keeping track of the state of the FPU, we migth be able to do better. If we are really switching between two processes that keep touching the FP state, save/restore is inevitable, but in the case of having one process that does most of the FPU usage, we may actually be able to do much better than the preloading. In particular, we may be able to keep track of which CPU the process ran on last, and also per CPU keep track of which process' FP state that CPU has. For modern CPU's that don't destroy the FPU contents on save time, that would allow us to do a lazy restore by just re-enabling the existing FPU state - with no restore cost at all! Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Cong Wang authored
Signed-off-by:
Cong Wang <amwang@redhat.com> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com>
-
Tyler Hicks authored
After passing through a ->setxattr() call, eCryptfs needs to copy the inode attributes from the lower inode to the eCryptfs inode, as they may have changed in the lower filesystem's ->setxattr() path. One example is if an extended attribute containing a POSIX Access Control List is being set. The new ACL may cause the lower filesystem to modify the mode of the lower inode and the eCryptfs inode would need to be updated to reflect the new mode. https://launchpad.net/bugs/926292Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Reported-by:
Sebastien Bacher <seb128@ubuntu.com> Cc: John Johansen <john.johansen@canonical.com> Cc: <stable@vger.kernel.org>
-
Tyler Hicks authored
statfs() calls on eCryptfs files returned the wrong filesystem type and, when using filename encryption, the wrong maximum filename length. If mount-wide filename encryption is enabled, the cipher block size and the lower filesystem's max filename length will determine the max eCryptfs filename length. Pre-tested, known good lengths are used when the lower filesystem's namelen is 255 and a cipher with 8 or 16 byte block sizes is used. In other, less common cases, we fall back to a safe rounded-down estimate when determining the eCryptfs namelen. https://launchpad.net/bugs/885744Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Reported-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
John Johansen <john.johansen@canonical.com>
-
Linus Torvalds authored
This creates three helper functions that do the TS_USEDFPU accesses, and makes everybody that used to do it by hand use those helpers instead. In addition, there's a couple of helper functions for the "change both CR0.TS and TS_USEDFPU at the same time" case, and the places that do that together have been changed to use those. That means that we have fewer random places that open-code this situation. The intent is partly to clarify the code without actually changing any semantics yet (since we clearly still have some hard to reproduce bug in this area), but also to make it much easier to use another approach entirely to caching the CR0.TS bit for software accesses. Right now we use a bit in the thread-info 'status' variable (this patch does not change that), but we might want to make it a full field of its own or even make it a per-cpu variable. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Touching TS_USEDFPU without touching CR0.TS is confusing, so don't do it. By moving it into the callers, we always do the TS_USEDFPU next to the CR0.TS accesses in the source code, and it's much easier to see how the two go hand in hand. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Commit 5b1cbac3 ("i387: make irq_fpu_usable() tests more robust") added a sanity check to the #NM handler to verify that we never cause the "Device Not Available" exception in kernel mode. However, that check actually pinpointed a (fundamental) race where we do cause that exception as part of the signal stack FPU state save/restore code. Because we use the floating point instructions themselves to save and restore state directly from user mode, we cannot do that atomically with testing the TS_USEDFPU bit: the user mode access itself may cause a page fault, which causes a task switch, which saves and restores the FP/MMX state from the kernel buffers. This kind of "recursive" FP state save is fine per se, but it means that when the signal stack save/restore gets restarted, it will now take the '#NM' exception we originally tried to avoid. With preemption this can happen even without the page fault - but because of the user access, we cannot just disable preemption around the save/restore instruction. There are various ways to solve this, including using the "enable/disable_page_fault()" helpers to not allow page faults at all during the sequence, and fall back to copying things by hand without the use of the native FP state save/restore instructions. However, the simplest thing to do is to just allow the #NM from kernel space, but fix the race in setting and clearing CR0.TS that this all exposed: the TS bit changes and the TS_USEDFPU bit absolutely have to be atomic wrt scheduling, so while the actual state save/restore can be interrupted and restarted, the act of actually clearing/setting CR0.TS and the TS_USEDFPU bit together must not. Instead of just adding random "preempt_disable/enable()" calls to what is already excessively ugly code, this introduces some helper functions that mostly mirror the "kernel_fpu_begin/end()" functionality, just for the user state instead. Those helper functions should probably eventually replace the other ad-hoc CR0.TS and TS_USEDFPU tests too, but I'll need to think about it some more: the task switching functionality in particular needs to expose the difference between the 'prev' and 'next' threads, while the new helper functions intentionally were written to only work with 'current'. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Anton Blanchard authored
perf on POWER stopped working after commit e050e3f0 (perf: Fix broken interrupt rate throttling). That patch exposed a bug in the POWER perf_events code. Since the PMCs count upwards and take an exception when the top bit is set, we want to write 0x80000000 - left in power_pmu_start. We were instead programming in left which effectively disables the counter until we eventually hit 0x80000000. This could take seconds or longer. With the patch applied I get the expected number of samples: SAMPLE events: 9948 Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <stable@kernel.org>
-
majianpeng authored
Signed-off-by:
majianpeng <majianpeng@gmail.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
Program Check exceptions are the result of WARNs, BUGs, some type of breakpoints, kprobe, and other illegal instructions. We want interrupts (and thus preemption) to remain disabled while doing the initial stage of testing the reason and branching off to a debugger or kprobe, so we are still on the original CPU which makes debugging easier in various cases. This is how the code was intended, hence the local_irq_enable() right in the middle of program_check_exception(). However, the assembly exception prologue for that exception was incorrectly marked as enabling interrupts, which defeats that (and records a redundant enable with lockdep). Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Stephen Rothwell authored
Since we are heading towards removing the Legacy iSeries platform, start by no longer building it for ppc64_defconfig. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
Upstream changes to the way PHB resources are registered broke the resource fixup for FSL boards. We can no longer rely on the resource pointer array for the PHB's pci_bus structure, so let's leave it alone and go straight for the PHB resources instead. This also makes the code generally more readable. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Ira Snyder authored
A kernel oops/panic prints an instruction dump showing several instructions before and after the instruction which caused the oops/panic. The code intended that the faulting instruction be enclosed in angle brackets, however a bug caused the faulting instruction to be interpreted by printk() as the message log level. To fix this, the KERN_CONT log level is added before the actual text of the printed message. === Before the patch === [ 1081.587266] Instruction dump: [ 1081.590236] 7c000110 7c0000f8 5400077c 552907f6 7d290378 992b0003 4e800020 38000001 [ 1081.598034] 3d20c03a 9009a114 7c0004ac 39200000 [ 1081.602500] 4e800020 3803ffd0 2b800009 <4>[ 1081.587266] Instruction dump: <4>[ 1081.590236] 7c000110 7c0000f8 5400077c 552907f6 7d290378 992b0003 4e800020 38000001 <4>[ 1081.598034] 3d20c03a 9009a114 7c0004ac 39200000 <98090000>[ 1081.602500] 4e800020 3803ffd0 2b800009 === After the patch === [ 51.385216] Instruction dump: [ 51.388186] 7c000110 7c0000f8 5400077c 552907f6 7d290378 992b0003 4e800020 38000001 [ 51.395986] 3d20c03a 9009a114 7c0004ac 39200000 <98090000> 4e800020 3803ffd0 2b800009 <4>[ 51.385216] Instruction dump: <4>[ 51.388186] 7c000110 7c0000f8 5400077c 552907f6 7d290378 992b0003 4e800020 38000001 <4>[ 51.395986] 3d20c03a 9009a114 7c0004ac 39200000 <98090000> 4e800020 3803ffd0 2b800009 Signed-off-by:
Ira W. Snyder <iws@ovro.caltech.edu> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Alexey Dobriyan authored
Use standard ror64() instead of hand-written. There is no standard ror64, so create it. The difference is shift value being "unsigned int" instead of uint64_t (for which there is no reason). gcc starts to emit native ROR instructions which it doesn't do for some reason currently. This should make the code faster. Patch survives in-tree crypto test and ping flood with hmac(sha512) on. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
- 15 Feb, 2012 9 commits
-
-
Jan Weitzel authored
There a two different irq variables ks->irq and netdev->irq. Only ks->irq is set on probe, so disabling irq in ks_start_xmit fails. This patches remove ks->irq from private data and use only netdev->irq. Tested on a kernel 3.0 based OMAP4430 SMP Board Signed-off-by:
Jan Weitzel <j.weitzel@phytec.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
VETH_INFO_PEER carries struct ifinfomsg plus optional IFLA attributes. A minimal size of sizeof(struct ifinfomsg) must be enforced or we may risk accessing that struct beyond the limits of the netlink message. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Giuseppe CAVALLARO authored
Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Giuseppe CAVALLARO authored
This patch moves the MAC HW initialization and the HW feature verification from the open to the probe function as D. Miller suggested. So the patch actually reorganizes and tidies-up some parts of the driver and indeed fixes some problem when tune its HW features. These can be overwritten by looking at the HW cap register at run-time and that generated problems. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by:
Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Francesco Virlinzi authored
In case of we use an external Wake-Up IRQ line (priv->wol_irq != dev->irq) we need to invoke the request_irq. Signed-off-by:
Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Giuseppe CAVALLARO authored
If this bit is set and the CRC error is reset, then the packet is valid. Only report this as stat info. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tim Gardner authored
BugLink: http://bugs.launchpad.net/bugs/900802 Cc: stable@vger.kernel.org 3.2+ Signed-off-by:
Till Kamppeter <till.kamppeter@gmail.com> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eugenia Emantayev authored
Add unicast steering entries to resource tracker. Do qp_detach also for these entries when VF doesn't shut down gracefully. Otherwise there is leakage of these resources, since they are not tracked. Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by:
Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eugenia Emantayev authored
When adding new unicast steer entry, before moving qp to state ready, actually before calling mlx4_RST2INIT_QP_wrapper(), there were added a lot of entries with local_qpn=0 into radix tree. This fact impacted the get_res() function and proper functioning of resource tracker in addition to adding trash entries into radix tree. Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by:
Yevgeny Petrilin <yevgenyp@melllanox.co.il> Signed-off-by:
David S. Miller <davem@davemloft.net>
-