- 11 May, 2022 7 commits
-
-
Zheyu Ma authored
The driver should goto label 'err_enable' when failing at regmap_read(). Signed-off-by:
Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/20220510153251.1741210-2-zheyuma97@gmail.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Zheyu Ma authored
The driver should goto label 'err' when failing to request the irq. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220510153251.1741210-7-zheyuma97@gmail.comSigned-off-by:
-
Zheyu Ma authored
After enabling the regulator, The driver should disable the regulator when failing at probing. Signed-off-by:
-
Zheyu Ma authored
After enabling the regulator, The driver should disable the regulator when failing at probing. Signed-off-by:
-
Zheyu Ma authored
After enabling the regulator, The driver should disable the regulator when failing at probing. Signed-off-by:
-
Zheyu Ma authored
The driver should goto label 'err' when failing at regmap_read(). Signed-off-by:
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Two minor changes to enable DMIC and capture for CS35L41, and one new configuration for AlderLake hardware.
-
- 10 May, 2022 10 commits
-
-
Shengjiu Wang authored
Add compatible string for imx8mp, which has micfil module Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1652087663-1908-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Shengjiu Wang authored
On i.MX8Plus there are two updates for micfil module. One is that the output format is S32_LE, only the 24 more significative bits have information, the other bits are always zero. Add 'formats' variable in soc data to distinguish the format on different platform. Another is that the fifo depth is 32 entries. Signed-off-by:
-
YC Hung authored
The host stream position is updated when no_stream_position is set as 0. However current implementation updates host stream position only when report data is larger than or equal to host period size which is decided by the period size of host side. It maybe cause host stream position update not in time. Therefore this patch introduces another field "cont_update_posn", a boolean value aimed to update host stream position continuously and based on period size of pipeline. It can get better precise when need to update host stream position from firmware. Reviewed-by:
Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
YC Hung <yc.hung@mediatek.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220509170425.54640-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Yang Yingliang authored
The resource is checked in probe function, so there is no need do this check in remove function. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220510124749.2663874-1-yangyingliang@huawei.comSigned-off-by:
-
Brent Lu authored
Enable capture stream of the cs35l41 dai link to support feedback stream from amplifier. Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Brent Lu <brent.lu@intel.com> Signed-off-by:
-
Brent Lu authored
The SOF topology supports 2 BE Links(dmic01 and dmic16k) and each link supports up to four DMICs. However, Chromebook does not implement ACPI NHLT table so the mach->mach_params.dmic_num is always zero. We add a quirk so machine driver knows it's running on a Chromebook and need to create BE Links for DMIC. Reviewed-by:
-
Vamshi Krishna authored
This patch adds the driver data for two rt1019 speaker amplifiers on SSP1 and rt5682s on SSP0 for ADL platform Reviewed-by:
Vamshi Krishna <vamshi.krishna.gopal@intel.com> Signed-off-by:
-
Zheyu Ma authored
The driver should register a callback that will deal with the disabling when it fails to probe. Signed-off-by:
-
Pierre-Louis Bossart authored
The ops are already part of the 'struct sdw_driver', it's unclear why this was copied into the 'slave' structure - no other driver does so. Signed-off-by:
-
Mark Brown authored
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>: Before componentisation any part registered as a CODEC would have automatically supported both little and big endian, ie. the core would duplicate any supported LE or BE PCM format to support the other endian as well. As componentisation removed the distinction between CODEC drivers and platform drivers, a flag was added to specify if this behaviour is required for a particular component. However, as most systems tend to use little endian the absence of the flag is rarely noticed. Also the naming of the flag "endianness" is a little unobvious as to if it should be applied to a particular component. This series adds a comment to better explain the meaning of the flag and then tidys up the usage of the flag. A couple of uses of the flag are removed where is has been used inappropriately on the CPU side of the DAI link, this is clearly not valid in the cases it has been used, and I suspect never would be valid. Then some redundant formats are removed, since they would be covered by existing endianness flags. And finally a bunch of devices that are missing the flag have it added. It is worth noting that since componenisation there are now a couple of cases where it is not entire clear to me that the flag should be applied to all CODECs as it was before. In those cases I haven't updated the driver to add the flag and they are outlined here: 1) Build into the AP CODECs, these are actual silicon inside the main processor and they typically receive audio directly from an internal bus. It is not obvious to me that these can happily ignore endian. On the CODEC side these include: jz4725b.c, jz4760.c, jz4770.c, rk3328_codec.c, lpass-va-macro.c, lpass-rx-macro.c, lpass-tx-macro.c, lpass-wsa-macro.c. There are also some examples of this scattered around the various platform support directories in sound/soc. 2) Devices behind non-audio buses, SPI just moves bits and doesn't really define an endian for audio data on the bus. Thus it seems the CODEC probably can care about the endian. The only devices that fall into this group (mostly for AoV) are: rt5514-spi.c, rt5677-spi.c, cros_ec_codec.c (only the AoV). 3) CODECs with no DAIs, these could specify the flag and plenty of them do; CODECs from the initial conversion to componentisation. But the flag makes no difference here since there is nothing for it to apply to. This includes purely analogue CODECs: aw8738.c, ssm2305.c, tpa6130a2.c, tda7419.c, max9759.c, max9768.c, max9877.c, lm4857.c, simple-mux.c, simple-amplifier.c. And devices that only do jack detection: ts3a227e.c, mt6359-accdet.c. If there are any opinions on adding the flag to any of those three groups they would be greatfully received. But I am leaning towards leaving 1,2 without endianness flags since it feels inappropriate, and removing the endian flag from devices in catagory 3 that already have it. Assuming no one objects to that I will do a follow up series for that.
-
- 09 May, 2022 23 commits
-
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: Hi, The current IPC client infrastructure can only be used with IPC3. This series carries updates for the core side of the client support to handle IPC4 messages and updates the ipc message injector to be usable with IPC4. The IPC flood test is only supported by SOF_IPC (IPC3), we are not going to create the aux device for it at all if the firmware is using IPC4. Regards, Peter --- Peter Ujfalusi (8): ASoC: SOF: sof-client: Add API to get the maximum IPC payload size ASoC: SOF: ipc-msg-injector: Query the maximum IPC payload size ASoC: SOF: sof-client-probes: Query the maximum IPC payload size ASoC: SOF: sof-client: Add API to get the ipc_type ASoC: SOF: sof-client: Add support IPC4 message sending ASoC: SOF: ipc-msg-injector: Separate the message sending ASoC: SOF: ipc-msg-injector: Add support for IPC4 messages ASoC: SOF: sof-client: IPC flood test can only work with SOF_IPC sound/soc/sof/sof-client-ipc-msg-injector.c | 181 ++++++++++++++++++-- sound/soc/sof/sof-client-probes.c | 5 +- sound/soc/sof/sof-client.c | 66 ++++++- sound/soc/sof/sof-client.h | 2 + 4 files changed, 227 insertions(+), 27 deletions(-) -- 2.36.0
-
Nícolas F. R. A. Prado authored
This reverts commit e056cf43 ("ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties") which was merged while the property name and definition were still being discussed. Revert the commit for now and a follow up commit will re-add the property after it is further discussed and reviewed. Signed-off-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220509185625.580811-1-nfraprado@collabora.comSigned-off-by:
-
Peter Ujfalusi authored
Currently the dtrace only supported with SOF_IPC. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
-
Mark Brown authored
Log the error code when snd_soc_regster_card() fails, but fold in the silencing of deferred probe errors. Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20220506130349.451452-1-broonie@kernel.org
-
YueHaibing authored
sound/soc/mediatek/mt8195/mt8195-mt6359.c:1639:32: warning: ‘mt8195_mt6359_max98390_rt5682_card’ defined but not used [-Wunused-variable] 1639 | static struct mt8195_card_data mt8195_mt6359_max98390_rt5682_card = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sound/soc/mediatek/mt8195/mt8195-mt6359.c:1634:32: warning: ‘mt8195_mt6359_rt1011_rt5682_card’ defined but not used [-Wunused-variable] 1634 | static struct mt8195_card_data mt8195_mt6359_rt1011_rt5682_card = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sound/soc/mediatek/mt8195/mt8195-mt6359.c:1629:32: warning: ‘mt8195_mt6359_rt1019_rt5682_card’ defined but not used [-Wunused-variable] 1629 | static struct mt8195_card_data mt8195_mt6359_rt1019_rt5682_card = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Since all users of this driver do need CONFIG_OF anyway, there is no need to save a few bytes on kernel builds while CONFIG_OF disabled, so just remove the #ifdef to fix this warning. Fixes: 86a6b9c9 ("ASoC: mediatek: mt8195: add machine support for max98390 and rt5682") Signed-off-by:YueHaibing <yuehaibing@huawei.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20220509120918.9000-1-yuehaibing@huawei.comSigned-off-by:
-
Lukasz Majewski authored
This adds devicetree support to the wm8940 codec driver. With a DT-based kernel, there is no board-specific setting to select the driver so allow it to be manually chosen. Signed-off-by:
Lukasz Majewski <lukma@denx.de> Acked-by:
-
Lukasz Majewski authored
This commit provides documentation entry for wm8940 codec. Signed-off-by:
-
Peter Ujfalusi authored
Currently the ipc flood test is only supported with SOF_IPC. Signed-off-by:
-
Peter Ujfalusi authored
The IPC message representation of an IPC4 differs from the IPC3 version significantly. The message for IPC4 should be written to the debugfs file in this form: 0-7 IPC4 header (2x u32) 8- additional payload, if any The reply is given back in the same form. The message size limitation is the same as with the IPC3, only messages which can fit to the mailbox can be injected (and received). Signed-off-by:
-
Peter Ujfalusi authored
Move out the code for sending the IPC message into a separate helper function in preparation for support for handling IPC4 communication. Signed-off-by:
-
Peter Ujfalusi authored
In order to be able to send an IPC4 message, the sof_client_ipc_tx_message() needs to parse the tx message differently to extract the size. The IPC notification registration is done by providing the notification type and the whole message is passed to the client when a match is found. Signed-off-by:
-
Peter Ujfalusi authored
Provide a way for the client drivers to query the ipc_type used by the firmware. Signed-off-by:
-
Peter Ujfalusi authored
Instead of using the SOF_IPC_MSG_MAX_SIZE as the maximum payload size for and IPC message, use the provided API to query it. Signed-off-by:
-
Peter Ujfalusi authored
Instead of using the SOF_IPC_MSG_MAX_SIZE as the maximum payload size for and IPC message, use the provided API to query it. Signed-off-by:
-
Peter Ujfalusi authored
Provide a way for the client drivers to query the maximum payload size of an IPC message. Currently clients do not have access to this information and they can only use the SOF_IPC_MSG_MAX_SIZE defined value. Signed-off-by:
-
Mark Brown authored
Merge series from Nícolas F. R. A. Prado <nfraprado@collabora.com>: These patches add properties that were missing on the dt-bindings of the audio components used by mt8192-asurada. Namely the i2s-share properties for the sound platform and the #sound-dai-cells on the rt1015p and rt5682 codecs when they're referenced by the machine sound node. Nícolas F. R. A. Prado (3): ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties ASoC: dt-bindings: rt1015p: Add #sound-dai-cells ASoC: dt-bindings: rt5682: Add #sound-dai-cells Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5 +++++ Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml | 3 +++ Documentation/devicetree/bindings/sound/rt5682.txt | 2 ++ 3 files changed, 10 insertions(+) -- 2.36.0
-
Minghao Chi authored
Simplify the return expression. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220505022102.54650-1-chi.minghao@zte.com.cnSigned-off-by:
-
Minghao Chi authored
Simplify the return expression. Reported-by:
-
Minghao Chi authored
Simplify the return expression. Reported-by:
-
Nícolas F. R. A. Prado authored
The rt5682 codec can be pointed to through a sound-dai property to be used as part of a machine sound driver. dtc expects #sound-dai-cells to be defined in the codec's node in those cases, so add it in the dt-binding and set it to 0. Signed-off-by:
-
Nícolas F. R. A. Prado authored
The rt1015p codec can be pointed to through a sound-dai property to be used as part of a machine sound driver. dtc expects #sound-dai-cells to be defined in the codec's node in those cases, so add it in the dt-binding and set it to 0. Signed-off-by:
-
Nícolas F. R. A. Prado authored
The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S bus between two busses. Add a pattern for these properties in the dt-binding. Signed-off-by:
-
Charles Keepax authored
The endianness flag is used on the CODEC side to specify an ambivalence to endian, typically because it is lost over the hardware link. This device receives audio over a SoundWire DAI and as such should have endianness applied. Signed-off-by:
-
