- 18 Nov, 2016 1 commit
-
-
Takashi Iwai authored
commit 6809cd68 upstream. Currently the ALSA proc handler allows read or write even if the proc file were write-only or read-only. It's mostly harmless, does thing but allocating memory and ignores the input/output. But it doesn't tell user about the invalid use, and it's confusing and inconsistent in comparison with other proc files. This patch adds some sanity checks and let the proc handler returning an -EIO error when the invalid read/write is performed. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 15 Nov, 2016 36 commits
-
-
Greg Kroah-Hartman authored
-
Sumit Saxena authored
commit 5e5ec175 upstream. This patch will fix regression caused by commit 1e793f6f ("scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices"). The problem was that the MEGASAS_IS_LOGICAL macro did not have braces and as a result the driver ended up exposing a lot of non-existing SCSI devices (all SCSI commands to channels 1,2,3 were returned as SUCCESS-DID_OK by driver). [mkp: clarified patch description] Fixes: 1e793f6fReported-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Tested-by:
Tomas Henzl <thenzl@redhat.com> Tested-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Alex Deucher authored
commit ff0bd441 upstream. Switch the order of the loops to walk the rates on the top so we exhaust all DP 1.1 rate/lane combinations before trying DP 1.2 rate/lane combos. This avoids selecting rates that are supported by the monitor, but not the connector leading to valid modes getting rejected. bug: https://bugs.freedesktop.org/show_bug.cgi?id=95206Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit c8213a63 upstream. When I fixed the dp rate selection in: 092c96a8 drm/radeon: fix dp link rate selection (v2) I accidently dropped the special handling for NUTMEG DP bridge chips. They require a fixed link rate. Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Ken Wang <Qingqing.Wang@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Tested-by:
Ken Moffat <zarniwhoop@ntlworld.com> Signed-off-by:
-
Alex Deucher authored
commit c47b9e09 upstream. Switch the order of the loops to walk the rates on the top so we exhaust all DP 1.1 rate/lane combinations before trying DP 1.2 rate/lane combos. This avoids selecting rates that are supported by the monitor, but not the connector leading to valid modes getting rejected. bug: https://bugs.freedesktop.org/show_bug.cgi?id=95206Signed-off-by:
-
Alex Deucher authored
commit 02d27234 upstream. When I fixed the dp rate selection in: 3b73b168cffd9c392584d3f665021fa2190f8612 drm/amdgpu: fix dp link rate selection (v2) I accidently dropped the special handling for NUTMEG DP bridge chips. They require a fixed link rate. Reviewed-by:
-
James Hogan authored
commit 91e4f1b6 upstream. When a guest TLB entry is replaced by TLBWI or TLBWR, we only invalidate TLB entries on the local CPU. This doesn't work correctly on an SMP host when the guest is migrated to a different physical CPU, as it could pick up stale TLB mappings from the last time the vCPU ran on that physical CPU. Therefore invalidate both user and kernel host ASIDs on other CPUs, which will cause new ASIDs to be generated when it next runs on those CPUs. We're careful only to do this if the TLB entry was already valid, and only for the kernel ASID where the virtual address it mapped is outside of the guest user address range. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.17.x- [james.hogan@imgtec.com: Backport to 3.17..4.4] Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit d450527a which was commit 91e4f1b6 upstream as it was incorrect. A fixed version will be forthcoming. Reported-by:
-
Stephen Rothwell authored
commit aaaab56d upstream. pageblock_order can be (at least) an unsigned int or an unsigned long depending on the kernel config and architecture, so use max_t(unsigned long ...) when comparing it. fixes these warnings: In file included from include/linux/list.h:8:0, from include/linux/kobject.h:20, from include/linux/of.h:21, from drivers/of/of_reserved_mem.c:17: drivers/of/of_reserved_mem.c: In function ‘__reserved_mem_alloc_size’: include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); \ ^ include/linux/kernel.h:747:9: note: in definition of macro ‘max’ typeof(y) _max2 = (y); \ ^ drivers/of/of_reserved_mem.c:131:48: note: in expansion of macro ‘max’ align = max(align, (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_ord ^ include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); \ ^ include/linux/kernel.h:747:21: note: in definition of macro ‘max’ typeof(y) _max2 = (y); \ ^ drivers/of/of_reserved_mem.c:131:48: note: in expansion of macro ‘max’ align = max(align, (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_ord ^ Fixes: 1cc8e345 ("drivers: of: of_reserved_mem: fixup the alignment with CMA setup") Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Rob Herring <robh@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 104ba78c ] When transmitting on a packet socket with PACKET_VNET_HDR and PACKET_QDISC_BYPASS, validate device support for features requested in vnet_hdr. Drop TSO packets sent to devices that do not support TSO or have the feature disabled. Note that the latter currently do process those packets correctly, regardless of not advertising the feature. Because of SKB_GSO_DODGY, it is not sufficient to test device features with netif_needs_gso. Full validate_xmit_skb is needed. Switch to software checksum for non-TSO packets that request checksum offload if that device feature is unsupported or disabled. Note that similar to the TSO case, device drivers may perform checksum offload correctly even when not advertising it. When switching to software checksum, packets hit skb_checksum_help, which has two BUG_ON checksum not in linear segment. Packet sockets always allocate at least up to csum_start + csum_off + 2 as linear. Tested by running github.com/wdebruij/kerneltools/psock_txring_vnet.c ethtool -K eth0 tso off tx on psock_txring_vnet -d $dst -s $src -i eth0 -l 2000 -n 1 -q -v psock_txring_vnet -d $dst -s $src -i eth0 -l 2000 -n 1 -q -v -N ethtool -K eth0 tx off psock_txring_vnet -d $dst -s $src -i eth0 -l 1000 -n 1 -q -v -G psock_txring_vnet -d $dst -s $src -i eth0 -l 1000 -n 1 -q -v -G -N v2: - add EXPORT_SYMBOL_GPL(validate_xmit_skb_list) Fixes: d346a3fa ("packet: introduce PACKET_QDISC_BYPASS socket option") Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit bf911e98 ] Andrey Konovalov reported that KASAN detected that SCTP was using a slab beyond the boundaries. It was caused because when handling out of the blue packets in function sctp_sf_ootb() it was checking the chunk len only after already processing the first chunk, validating only for the 2nd and subsequent ones. The fix is to just move the check upwards so it's also validated for the 1st chunk. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Jamal Hadi Salim authored
[ Upstream commit 9ee78374 ] Daniel says: While trying out [1][2], I noticed that tc monitor doesn't show the correct handle on delete: $ tc monitor qdisc clsact ffff: dev eno1 parent ffff:fff1 filter dev eno1 ingress protocol all pref 49152 bpf handle 0x2a [...] deleted filter dev eno1 ingress protocol all pref 49152 bpf handle 0xf3be0c80 some context to explain the above: The user identity of any tc filter is represented by a 32-bit identifier encoded in tcm->tcm_handle. Example 0x2a in the bpf filter above. A user wishing to delete, get or even modify a specific filter uses this handle to reference it. Every classifier is free to provide its own semantics for the 32 bit handle. Example: classifiers like u32 use schemes like 800:1:801 to describe the semantics of their filters represented as hash table, bucket and node ids etc. Classifiers also have internal per-filter representation which is different from this externally visible identity. Most classifiers set this internal representation to be a pointer address (which allows fast retrieval of said filters in their implementations). This internal representation is referenced with the "fh" variable in the kernel control code. When a user successfuly deletes a specific filter, by specifying the correct tcm->tcm_handle, an event is generated to user space which indicates which specific filter was deleted. Before this patch, the "fh" value was sent to user space as the identity. As an example what is shown in the sample bpf filter delete event above is 0xf3be0c80. This is infact a 32-bit truncation of 0xffff8807f3be0c80 which happens to be a 64-bit memory address of the internal filter representation (address of the corresponding filter's struct cls_bpf_prog); After this patch the appropriate user identifiable handle as encoded in the originating request tcm->tcm_handle is generated in the event. One of the cardinal rules of netlink rules is to be able to take an event (such as a delete in this case) and reflect it back to the kernel and successfully delete the filter. This patch achieves that. Note, this issue has existed since the original TC action infrastructure code patch back in 2004 as found in: https://git.kernel.org/cgit/linux/kernel/git/history/history.git/commit/ [1] http://patchwork.ozlabs.org/patch/682828/ [2] http://patchwork.ozlabs.org/patch/682829/ Fixes: 4e54c481 ("[NET]: Add tc extensions infrastructure.") Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 10df8e61 ] First bug was added in commit ad6f939a ("ip: Add offset parameter to ip_cmsg_recv") : Tom missed that ipv4 udp messages could be received on AF_INET6 socket. ip_cmsg_recv(msg, skb) should have been replaced by ip_cmsg_recv_offset(msg, skb, sizeof(struct udphdr)); Then commit e6afc8ac ("udp: remove headers from UDP packets before queueing") forgot to adjust the offsets now UDP headers are pulled before skb are put in receive queue. Fixes: ad6f939a ("ip: Add offset parameter to ip_cmsg_recv") Fixes: e6afc8ac ("udp: remove headers from UDP packets before queueing") Signed-off-by:
-
Jiri Slaby authored
[ Upstream commit a4b8e71b ] Most of getsockopt handlers in net/sctp/socket.c check len against sizeof some structure like: if (len < sizeof(int)) return -EINVAL; On the first look, the check seems to be correct. But since len is int and sizeof returns size_t, int gets promoted to unsigned size_t too. So the test returns false for negative lengths. Yes, (-1 < sizeof(long)) is false. Fix this in sctp by explicitly checking len < 0 before any getsockopt handler is called. Note that sctp_getsockopt_events already handled the negative case. Since we added the < 0 check elsewhere, this one can be removed. If not checked, this is the result: UBSAN: Undefined behaviour in ../mm/page_alloc.c:2722:19 shift exponent 52 is too large for 32-bit type 'int' CPU: 1 PID: 24535 Comm: syz-executor Not tainted 4.8.1-0-syzkaller #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 0000000000000000 ffff88006d99f2a8 ffffffffb2f7bdea 0000000041b58ab3 ffffffffb4363c14 ffffffffb2f7bcde ffff88006d99f2d0 ffff88006d99f270 0000000000000000 0000000000000000 0000000000000034 ffffffffb5096422 Call Trace: [<ffffffffb3051498>] ? __ubsan_handle_shift_out_of_bounds+0x29c/0x300 ... [<ffffffffb273f0e4>] ? kmalloc_order+0x24/0x90 [<ffffffffb27416a4>] ? kmalloc_order_trace+0x24/0x220 [<ffffffffb2819a30>] ? __kmalloc+0x330/0x540 [<ffffffffc18c25f4>] ? sctp_getsockopt_local_addrs+0x174/0xca0 [sctp] [<ffffffffc18d2bcd>] ? sctp_getsockopt+0x10d/0x1b0 [sctp] [<ffffffffb37c1219>] ? sock_common_getsockopt+0xb9/0x150 [<ffffffffb37be2f5>] ? SyS_getsockopt+0x1a5/0x270 Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-sctp@vger.kernel.org Cc: netdev@vger.kernel.org Acked-by:
-
WANG Cong authored
[ Upstream commit 396a30cc ] This reverts commit a681574c ("ipv4: disable BH in set_ping_group_range()") because we never read ping_group_range in BH context (unlike local_port_range). Then, since we already have a lock for ping_group_range, those using ip_local_ports.lock for ping_group_range are clearly typos. We might consider to share a same lock for both ping_group_range and local_port_range w.r.t. space saving, but that should be for net-next. Fixes: a681574c ("ipv4: disable BH in set_ping_group_range()") Fixes: ba6b918a ("ping: move ping_group_range out of CONFIG_SYSCTL") Cc: Eric Dumazet <edumazet@google.com> Cc: Eric Salo <salo@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit a681574c ] In commit 4ee3bd4a ("ipv4: disable BH when changing ip local port range") Cong added BH protection in set_local_port_range() but missed that same fix was needed in set_ping_group_range() Fixes: b8f1a556 ("udp: Add function to make source port for UDP tunnels") Signed-off-by:
Eric Salo <salo@google.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit fcd91dd4 ] Currently, GRO can do unlimited recursion through the gro_receive handlers. This was fixed for tunneling protocols by limiting tunnel GRO to one level with encap_mark, but both VLAN and TEB still have this problem. Thus, the kernel is vulnerable to a stack overflow, if we receive a packet composed entirely of VLAN headers. This patch adds a recursion counter to the GRO layer to prevent stack overflow. When a gro_receive function hits the recursion limit, GRO is aborted for this skb and it is processed normally. This recursion counter is put in the GRO CB, but could be turned into a percpu counter if we run out of space in the CB. Thanks to Vladimír Beneš <vbenes@redhat.com> for the initial bug report. Fixes: CVE-2016-7039 Fixes: 9b174d88 ("net: Add Transparent Ethernet Bridging GRO support.") Fixes: 66e5133f ("vlan: Add GRO support for non hardware accelerated vlan") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Jiri Pirko authored
[ Upstream commit 85dda4e5 ] The offload flag is a status flag and should not be used by FIB semantics for comparison. Fixes: 37ed9493 ("rtnetlink: add RTNH_F_EXTERNAL flag for fib offload") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 7cb3f921 ] Satish reported a problem with the perm multicast router ports not getting reenabled after some series of events, in particular if it happens that the multicast snooping has been disabled and the port goes to disabled state then it will be deleted from the router port list, but if it moves into non-disabled state it will not be re-added because the mcast snooping is still disabled, and enabling snooping later does nothing. Here are the steps to reproduce, setup br0 with snooping enabled and eth1 added as a perm router (multicast_router = 2): 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show <empty> At this point we have mcast enabled and eth1 as a perm router (value = 2) but it is not in the router list which is incorrect. After this change: 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show router ports on br0: eth1 Note: we can directly do br_multicast_enable_port for all because the querier timer already has checks for the port state and will simply expire if it's in blocking/disabled. See the comment added by commit 9aa66382 ("bridge: multicast: add a comment to br_port_state_selection about blocking state") Fixes: 561f1103 ("bridge: Add multicast_snooping sysfs toggle") Reported-by:
Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9a0b1e8b ] After Jesper commit back in linux-3.18, we trigger a lockdep splat in proc_create_data() while allocating memory from pktgen_change_name(). This patch converts t->if_lock to a mutex, since it is now only used from control path, and adds proper locking to pktgen_change_name() 1) pktgen_thread_lock to protect the outer loop (iterating threads) 2) t->if_lock to protect the inner loop (iterating devices) Note that before Jesper patch, pktgen_change_name() was lacking proper protection, but lockdep was not able to detect the problem. Fixes: 8788370a ("pktgen: RCU-ify "if_list" to remove lock in next_to_run()") Reported-by:
John Sperbeck <jsperbeck@google.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit a220445f ] The goal of the patch is to fix this scenario: ip link add dummy1 type dummy ip link set dummy1 up ip link set lo down ; ip link set lo up After that sequence, the local route to the link layer address of dummy1 is not there anymore. When the loopback is set down, all local routes are deleted by addrconf_ifdown()/rt6_ifdown(). At this time, the rt6_info entry still exists, because the corresponding idev has a reference on it. After the rcu grace period, dst_rcu_free() is called, and thus ___dst_free(), which will set obsolete to DST_OBSOLETE_DEAD. In this case, init_loopback() is called before dst_rcu_free(), thus obsolete is still sets to something <= 0. So, the function doesn't add the route again. To avoid that race, let's check the rt6 refcnt instead. Fixes: 25fb6ca4 ("net IPv6 : Fix broken IPv6 routing table after loopback down-up") Fixes: a881ae1f ("ipv6: don't call addrconf_dst_alloc again when enable lo") Fixes: 33d99113 ("ipv6: reallocate addrconf router for ipv6 address when lo device up") Reported-by:
Francesco Santoro <francesco.santoro@6wind.com> Reported-by:
Samuel Gauthier <samuel.gauthier@6wind.com> CC: Balakumaran Kannan <Balakumaran.Kannan@ap.sony.com> CC: Maruthi Thotad <Maruthi.Thotad@ap.sony.com> CC: Sabrina Dubroca <sd@queasysnail.net> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Weilong Chen <chenweilong@huawei.com> CC: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Vadim Fedorenko authored
[ Upstream commit 68d00f33 ] The commit ea3dc960 ("ip6_tunnel: Add support for wildcard tunnel endpoints.") introduces support for wildcards in tunnels endpoints, but in some rare circumstances ip6_tnl_lookup selects wrong tunnel interface relying only on source or destination address of the packet and not checking presence of wildcard in tunnels endpoints. Later in ip6_tnl_rcv this packets can be dicarded because of difference in ipproto even if fallback device have proper ipproto configuration. This patch adds checks of wildcard endpoint in tunnel avoiding such behavior Fixes: ea3dc960 ("ip6_tunnel: Add support for wildcard tunnel endpoints.") Signed-off-by:
Vadim Fedorenko <junk@yandex-team.ru> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 8ce48623 ] Baozeng Ding reported following KASAN splat : BUG: KASAN: use-after-free in ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 at addr ffff880029c84ec8 Read of size 1 by task poc/25548 Call Trace: [<ffffffff82cf43c9>] dump_stack+0x12e/0x185 /lib/dump_stack.c:15 [< inline >] print_address_description /mm/kasan/report.c:204 [<ffffffff817ced3b>] kasan_report_error+0x48b/0x4b0 /mm/kasan/report.c:283 [< inline >] kasan_report /mm/kasan/report.c:303 [<ffffffff817ced9e>] __asan_report_load1_noabort+0x3e/0x40 /mm/kasan/report.c:321 [<ffffffff85c71da1>] ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 /net/ipv6/datagram.c:687 [<ffffffff85c734c3>] ip6_datagram_recv_ctl+0x33/0x40 [<ffffffff85c0b07c>] do_ipv6_getsockopt.isra.4+0xaec/0x2150 [<ffffffff85c0c7f6>] ipv6_getsockopt+0x116/0x230 [<ffffffff859b5a12>] tcp_getsockopt+0x82/0xd0 /net/ipv4/tcp.c:3035 [<ffffffff855fb385>] sock_common_getsockopt+0x95/0xd0 /net/core/sock.c:2647 [< inline >] SYSC_getsockopt /net/socket.c:1776 [<ffffffff855f8ba2>] SyS_getsockopt+0x142/0x230 /net/socket.c:1758 [<ffffffff8685cdc5>] entry_SYSCALL_64_fastpath+0x23/0xc6 Memory state around the buggy address: ffff880029c84d80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880029c84e00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ffff880029c84e80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff880029c84f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880029c84f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff He also provided a syzkaller reproducer. Issue is that ip6_datagram_recv_specific_ctl() expects to find IP6CB data that was moved at a different place in tcp_v6_rcv() This patch moves tcp_v6_restore_cb() up and calls it from tcp_v6_do_rcv() when np->pktoptions is set. Fixes: 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by:
Baozeng Ding <sploving1@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d35c99ff ] Since linux-3.15, netlink_dump() can use up to 16384 bytes skb allocations. Due to struct skb_shared_info ~320 bytes overhead, we end up using order-3 (on x86) page allocations, that might trigger direct reclaim and add stress. The intent was really to attempt a large allocation but immediately fallback to a smaller one (order-1 on x86) in case of memory stress. On recent kernels (linux-4.4), we can remove __GFP_DIRECT_RECLAIM to meet the goal. Old kernels would need to remove __GFP_WAIT While we are at it, since we do an order-3 allocation, allow to use all the allocated bytes instead of 16384 to reduce syscalls during large dumps. iproute2 already uses 32KB recvmsg() buffer sizes. Alexei provided an initial patch downsizing to SKB_WITH_OVERHEAD(16384) Fixes: 9063e21f ("netlink: autosize skb lengthes") Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Cc: Greg Thelen <gthelen@google.com> Reviewed-by:
Greg Rose <grose@lightfleet.com> Acked-by:
-
Anoob Soman authored
[ Upstream commit 66644982 ] If a socket has FANOUT sockopt set, a new proto_hook is registered as part of fanout_add(). When processing a NETDEV_UNREGISTER event in af_packet, __fanout_unlink is called for all sockets, but prot_hook which was registered as part of fanout_add is not removed. Call fanout_release, on a NETDEV_UNREGISTER, which removes prot_hook and removes fanout from the fanout_list. This fixes BUG_ON(!list_empty(&dev->ptype_specific)) in netdev_run_todo() Signed-off-by:
Anoob Soman <anoob.soman@citrix.com> Signed-off-by:
-
Andrew Collins authored
[ Upstream commit 93409033 ] This is a respin of a patch to fix a relatively easily reproducible kernel panic related to the all_adj_list handling for netdevs in recent kernels. The following sequence of commands will reproduce the issue: ip link add link eth0 name eth0.100 type vlan id 100 ip link add link eth0 name eth0.200 type vlan id 200 ip link add name testbr type bridge ip link set eth0.100 master testbr ip link set eth0.200 master testbr ip link add link testbr mac0 type macvlan ip link delete dev testbr This creates an upper/lower tree of (excuse the poor ASCII art): /---eth0.100-eth0 mac0-testbr- \---eth0.200-eth0 When testbr is deleted, the all_adj_lists are walked, and eth0 is deleted twice from the mac0 list. Unfortunately, during setup in __netdev_upper_dev_link, only one reference to eth0 is added, so this results in a panic. This change adds reference count propagation so things are handled properly. Matthias Schiffer reported a similar crash in batman-adv: https://github.com/freifunk-gluon/gluon/issues/680 https://www.open-mesh.org/issues/247 which this patch also seems to resolve. Signed-off-by:
Andrew Collins <acollins@cradlepoint.com> Signed-off-by:
-
Shmulik Ladkani authored
[ Upstream commit f39acc84 ] Generic skb_vlan_push/skb_vlan_pop functions don't properly handle the case where the input skb data pointer does not point at the mac header: - They're doing push/pop, but fail to properly unwind data back to its original location. For example, in the skb_vlan_push case, any subsequent 'skb_push(skb, skb->mac_len)' calls make the skb->data point 4 bytes BEFORE start of frame, leading to bogus frames that may be transmitted. - They update rcsum per the added/removed 4 bytes tag. Alas if data is originally after the vlan/eth headers, then these bytes were already pulled out of the csum. OTOH calling skb_vlan_push/skb_vlan_pop with skb->data at mac_header present no issues. act_vlan is the only caller to skb_vlan_*() that has skb->data pointing at network header (upon ingress). Other calles (ovs, bpf) already adjust skb->data at mac_header. This patch fixes act_vlan to point to the mac_header prior calling skb_vlan_*() functions, as other callers do. Signed-off-by:
Shmulik Ladkani <shmulik.ladkani@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Pravin Shelar <pshelar@ovn.org> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 63d75463 ] The commit 879c7220 ("net: pktgen: Observe needed_headroom of the device") increased the 'pkt_overhead' field value by LL_RESERVED_SPACE. As a side effect the generated packet size, computed as: /* Eth + IPh + UDPh + mpls */ datalen = pkt_dev->cur_pkt_size - 14 - 20 - 8 - pkt_dev->pkt_overhead; is decreased by the same value. The above changed slightly the behavior of existing pktgen users, and made the procfs interface somewhat inconsistent. Fix it by restoring the previous pkt_overhead value and using LL_RESERVED_SPACE as extralen in skb allocation. Also, change pktgen_alloc_skb() to only partially reserve the headroom to allow the caller to prefetch from ll header start. v1 -> v2: - fixed some typos in the comments Fixes: 879c7220 ("net: pktgen: Observe needed_headroom of the device") Suggested-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Gavin Schenk authored
[ Upstream commit b82d44d7 ] If the mac address origin is not dt, you can only safely assign a mac address after "link up" of the device. If the link is off the clocks are disabled and because of issues assigning registers when clocks are off the new mac address cannot be written in .ndo_set_mac_address() on some soc's. This fix sets the mac address unconditionally in fec_restart(...) and ensures consistency between fec registers and the network layer. Signed-off-by:
Gavin Schenk <g.schenk@eckelmann.de> Acked-by:
Fugang Duan <fugang.duan@nxp.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 9638d19e ("net: fec: add netif status check before set mac address") Signed-off-by:
-
Milton Miller authored
[ Upstream commit 1b0ff898 ] While the driver is probing the adapter, an error may occur before the netdev structure is allocated and attached to pci_dev. In this case, not only netdev isn't available, but the tg3 private structure is also not available as it is just math from the NULL pointer, so dereferences must be skipped. The following trace is seen when the error is triggered: [1.402247] Unable to handle kernel paging request for data at address 0x00001a99 [1.402410] Faulting instruction address: 0xc0000000007e33f8 [1.402450] Oops: Kernel access of bad area, sig: 11 [#1] [1.402481] SMP NR_CPUS=2048 NUMA PowerNV [1.402513] Modules linked in: [1.402545] CPU: 0 PID: 651 Comm: eehd Not tainted 4.4.0-36-generic #55-Ubuntu [1.402591] task: c000001fe4e42a20 ti: c000001fe4e88000 task.ti: c000001fe4e88000 [1.402742] NIP: c0000000007e33f8 LR: c0000000007e3164 CTR: c000000000595ea0 [1.402787] REGS: c000001fe4e8b790 TRAP: 0300 Not tainted (4.4.0-36-generic) [1.402832] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 28000422 XER: 20000000 [1.403058] CFAR: c000000000008468 DAR: 0000000000001a99 DSISR: 42000000 SOFTE: 1 GPR00: c0000000007e3164 c000001fe4e8ba10 c0000000015c5e00 0000000000000000 GPR04: 0000000000000001 0000000000000000 0000000000000039 0000000000000299 GPR08: 0000000000000000 0000000000000001 c000001fe4e88000 0000000000000006 GPR12: 0000000000000000 c00000000fb40000 c0000000000e6558 c000003ca1bffd00 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000000d52768 GPR24: c000000000d52740 0000000000000100 c000003ca1b52000 0000000000000002 GPR28: 0000000000000900 0000000000000000 c00000000152a0c0 c000003ca1b52000 [1.404226] NIP [c0000000007e33f8] tg3_io_error_detected+0x308/0x340 [1.404265] LR [c0000000007e3164] tg3_io_error_detected+0x74/0x340 This patch avoids the NULL pointer dereference by moving the access after the netdev NULL pointer check on tg3_io_error_detected(). Also, we add a check for netdev being NULL on tg3_io_resume() [suggested by Michael Chan]. Fixes: 0486a063 ("tg3: prevent ifup/ifdown during PCI error recovery") Fixes: dfc8f370 ("net/tg3: Release IRQs on permanent error") Tested-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by:
Milton Miller <miltonm@us.ibm.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 2cf75070 ] Since the commit below the ipmr/ip6mr rtnl_unicast() code uses the portid instead of the previous dst_pid which was copied from in_skb's portid. Since the skb is new the portid is 0 at that point so the packets are sent to the kernel and we get scheduling while atomic or a deadlock (depending on where it happens) by trying to acquire rtnl two times. Also since this is RTM_GETROUTE, it can be triggered by a normal user. Here's the sleeping while atomic trace: [ 7858.212557] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ 7858.212748] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0 [ 7858.212881] 2 locks held by swapper/0/0: [ 7858.213013] #0: (((&mrt->ipmr_expire_timer))){+.-...}, at: [<ffffffff810fbbf5>] call_timer_fn+0x5/0x350 [ 7858.213422] #1: (mfc_unres_lock){+.....}, at: [<ffffffff8161e005>] ipmr_expire_process+0x25/0x130 [ 7858.213807] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc7+ #179 [ 7858.213934] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 7858.214108] 0000000000000000 ffff88005b403c50 ffffffff813a7804 0000000000000000 [ 7858.214412] ffffffff81a1338e ffff88005b403c78 ffffffff810a4a72 ffffffff81a1338e [ 7858.214716] 000000000000026c 0000000000000000 ffff88005b403ca8 ffffffff810a4b9f [ 7858.215251] Call Trace: [ 7858.215412] <IRQ> [<ffffffff813a7804>] dump_stack+0x85/0xc1 [ 7858.215662] [<ffffffff810a4a72>] ___might_sleep+0x192/0x250 [ 7858.215868] [<ffffffff810a4b9f>] __might_sleep+0x6f/0x100 [ 7858.216072] [<ffffffff8165bea3>] mutex_lock_nested+0x33/0x4d0 [ 7858.216279] [<ffffffff815a7a5f>] ? netlink_lookup+0x25f/0x460 [ 7858.216487] [<ffffffff8157474b>] rtnetlink_rcv+0x1b/0x40 [ 7858.216687] [<ffffffff815a9a0c>] netlink_unicast+0x19c/0x260 [ 7858.216900] [<ffffffff81573c70>] rtnl_unicast+0x20/0x30 [ 7858.217128] [<ffffffff8161cd39>] ipmr_destroy_unres+0xa9/0xf0 [ 7858.217351] [<ffffffff8161e06f>] ipmr_expire_process+0x8f/0x130 [ 7858.217581] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.217785] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.217990] [<ffffffff810fbc95>] call_timer_fn+0xa5/0x350 [ 7858.218192] [<ffffffff810fbbf5>] ? call_timer_fn+0x5/0x350 [ 7858.218415] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.218656] [<ffffffff810fde10>] run_timer_softirq+0x260/0x640 [ 7858.218865] [<ffffffff8166379b>] ? __do_softirq+0xbb/0x54f [ 7858.219068] [<ffffffff816637c8>] __do_softirq+0xe8/0x54f [ 7858.219269] [<ffffffff8107a948>] irq_exit+0xb8/0xc0 [ 7858.219463] [<ffffffff81663452>] smp_apic_timer_interrupt+0x42/0x50 [ 7858.219678] [<ffffffff816625bc>] apic_timer_interrupt+0x8c/0xa0 [ 7858.219897] <EOI> [<ffffffff81055f16>] ? native_safe_halt+0x6/0x10 [ 7858.220165] [<ffffffff810d64dd>] ? trace_hardirqs_on+0xd/0x10 [ 7858.220373] [<ffffffff810298e3>] default_idle+0x23/0x190 [ 7858.220574] [<ffffffff8102a20f>] arch_cpu_idle+0xf/0x20 [ 7858.220790] [<ffffffff810c9f8c>] default_idle_call+0x4c/0x60 [ 7858.221016] [<ffffffff810ca33b>] cpu_startup_entry+0x39b/0x4d0 [ 7858.221257] [<ffffffff8164f995>] rest_init+0x135/0x140 [ 7858.221469] [<ffffffff81f83014>] start_kernel+0x50e/0x51b [ 7858.221670] [<ffffffff81f82120>] ? early_idt_handler_array+0x120/0x120 [ 7858.221894] [<ffffffff81f8243f>] x86_64_start_reservations+0x2a/0x2c [ 7858.222113] [<ffffffff81f8257c>] x86_64_start_kernel+0x13b/0x14a Fixes: 2942e900 ("[RTNETLINK]: Use rtnl_unicast() for rtnetlink unicasts") Signed-off-by:
-
Lance Richardson authored
[ Upstream commit db32e4e4 ] Similar to commit 3be07244 ("ip6_gre: fix flowi6_proto value in xmit path"), set flowi6_proto to IPPROTO_GRE for output route lookup. Up until now, ip6gre_xmit_other() has set flowi6_proto to a bogus value. This affected output route lookup for packets sent on an ip6gretap device in cases where routing was dependent on the value of flowi6_proto. Since the correct proto is already set in the tunnel flowi6 template via commit 252f3f5a ("ip6_gre: Set flowi6_proto as IPPROTO_GRE in xmit path."), simply delete the line setting the incorrect flowi6_proto value. Suggested-by:
Lance Richardson <lrichard@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 019b1c9f ] If DBGUNDO() is enabled (FASTRETRANS_DEBUG > 1), a compile error will happen, since inet6_sk(sk)->daddr became sk->sk_v6_daddr Fixes: efe4208f ("ipv6: make lookups simpler and faster") Signed-off-by:
-
Douglas Caetano dos Santos authored
[ Upstream commit 2fe664f1 ] With TCP MTU probing enabled and offload TX checksumming disabled, tcp_mtu_probe() calculated the wrong checksum when a fragment being copied into the probe's SKB had an odd length. This was caused by the direct use of skb_copy_and_csum_bits() to calculate the checksum, as it pads the fragment being copied, if needed. When this fragment was not the last, a subsequent call used the previous checksum without considering this padding. The effect was a stale connection in one way, as even retransmissions wouldn't solve the problem, because the checksum was never recalculated for the full SKB length. Signed-off-by:
Douglas Caetano dos Santos <douglascs@taghos.com.br> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 20c64d5c ] A malicious TCP receiver, sending SACK, can force the sender to split skbs in write queue and increase its memory usage. Then, when socket is closed and its write queue purged, we might overflow sk_forward_alloc (It becomes negative) sk_mem_reclaim() does nothing in this case, and more than 2GB are leaked from TCP perspective (tcp_memory_allocated is not changed) Then warnings trigger from inet_sock_destruct() and sk_stream_kill_queues() seeing a not zero sk_forward_alloc All TCP stack can be stuck because TCP is under memory pressure. A simple fix is to preemptively reclaim from sk_mem_uncharge(). This makes sure a socket wont have more than 2 MB forward allocated, after burst and idle period. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit ffb4d6c8 ] If a TCP socket gets a large write queue, an overflow can happen in a test in __tcp_retransmit_skb() preventing all retransmits. The flow then stalls and resets after timeouts. Tested: sysctl -w net.core.wmem_max=1000000000 netperf -H dest -- -s 1000000000 Signed-off-by:
-
- 10 Nov, 2016 3 commits
-
-
Greg Kroah-Hartman authored
-
Oliver Neukum authored
commit cf0ea4da upstream. Like many similar devices it needs a quirk to work. Issuing the request gets the device into an irrecoverable state. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Boris Brezillon authored
commit 40b6e61a upstream. Commit e96a8a3b ("UBI: Fastmap: Do not add vol if it already exists") introduced a bug by changing the possible error codes returned by add_vol(): - this function no longer returns NULL in case of allocation failure but return ERR_PTR(-ENOMEM) - when a duplicate entry in the volume RB tree is found it returns ERR_PTR(-EEXIST) instead of ERR_PTR(-EINVAL) Fix the tests done on add_vol() return val to match this new behavior. Fixes: e96a8a3b ("UBI: Fastmap: Do not add vol if it already exists") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by:
Sheng Yong <shengyong1@huawei.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
