- 25 Nov, 2013 32 commits
-
-
Paul Zimmerman authored
Remove #ifdef DEBUG from a couple of places where it is not needed Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Zimmerman authored
Rename dwc2_check_core_status() to dwc2_is_controller_alive(), and make it a boolean function. Also change the message when the controller is dead to say "dead" instead of "disconnected". Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Zimmerman authored
Remove useless cast in dwc2_get_otg_version() Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Zimmerman authored
NO_FS_PHY_HW_CHECKS is never defined, so remove the conditional code that checks for it being set Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Zimmerman authored
We were not checking the return value from any of these functions, so make them void functions Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Zimmerman authored
DWC2_PARAM_TEST is not a very good name for this macro, so rename it to DWC2_OUT_OF_BOUNDS Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Zimmerman authored
dwc2_process_non_isoc_desc() can potentially free the qtd, so null out the qtd pointer if the call fails so we don't try to access it later Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Zimmerman authored
Fix some functions called by dwc2_hcd_qtd_add() to return either a proper error code or 0, instead of somewhat random values. Then change the caller of dwc2_hcd_qtd_add() to just check the return value for 0. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Julien DELACOU authored
If the GRSTCTL_CSFTRST self-clearing bit never comes back to 0 for any reason, the controller is under reset state and cannot be used. It's preferable to abort initialization in such case. Signed-off-by: Julien Delacou <julien.delacou@st.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Julien DELACOU authored
Pending interrupts clearing is done in dwc2_enable_common_interrupts so we don't need to do it twice. Signed-off-by: Julien Delacou <julien.delacou@st.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexandre Demers authored
Remove useless netdev_info slowly flooding dmesg. Fixes bug https://bugzilla.kernel.org/show_bug.cgi?id=64231Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The DPRINTK messages in this driver are just added noise. Remove them. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use dev_dbg() instead of the DPRINTK macro to output the comedi debugging information. The dev_dbg() will prefix the messages appropriately so remove the "comedi%d: amplc_pci230: " portion and use __func__ to show the actual function name for debugging. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use dev_dbg() instead of the DPRINTK macro to output the comedi debugging information. The dev_dbg() will prefix the messages appropriately so remove the "comedi%d: " DRIVER_NAME portion and use __func__ to show the actual function name for debugging. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Remove the DPRINTK messages that are just function trace noise. Use dev_dbg() instead of the DPRINTK macro to output the comedi debugging information. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use dev_dbg() instead of the DPRINTK macro to output the comedi debugging information. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Remove this module parameter and use the CONFIG_COMEDI_DEBUG option to enable normal kernel debugging with -DDEBUG flag. Remove the #undef DEBUG from all the comedi source files so they will honour the -DDEBUG flag. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
This define unables some debug code that prints the status flags during the interrupt handler. These messages are just added noise and it's probably not a good idea to spew them during the interrupt anyway. Remove the DEBUG define as well as the debug code. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
This define is only used to enable some debug messages during the board attach. These are just added noise, remove them as well as the DEBUG define. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
These defines are not used in the driver. Remove them. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The comedi core defines a DPRINTK macro in comedidev.h. Use that macro instead of defining a private version in this driver. Also, remove the DEBUG define since it was only used to enable the DPRINTK macro. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
This define is not used by the driver. Just remove it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
This define is only used to enable a debug message during the board attach. The message is just added noise, remove it as well as the DEBUG define. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
This macro is only used to output some function tracing debug messages. These messages are just added noise so remove the DEBUG macro as well as the noise. Also, remove pcl816_cmdtest_out() which was only called as part of the DEBUG() in pcl816_ai_cmdtest(). Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The private data does not contain 'das6402_irqcount' or 'das6402_wordsread' members so the printk noise produces build errors when DEBUG is defined. The other printk is just added noise. Remove the printk's to fix the build errors and remove the noise. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Conrad Gomes authored
This patch removes MACRO definition pr_fmt which was initially required by pr_info and pr_err logging functions. Signed-off-by: Conrad Gomes <conrad.s.j.gomes@gmail.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Conrad Gomes authored
This is a patch which subsitutes pr_err with the preferred dev_err for device drivers in __unioxx5_analog_write. The function definition of __unioxx5_analog_write has been changed to take the pointer to the struct comedi_subdevice as a parameter instead of the pointer to struct unioxx5_subd_priv. The pointers to the stuct device and the struct unioxx5_subd_priv are obtained through the pointer to the struct comedi_subdevice in this function. The function call to __unioxx5_analog_write in unioxx5_subdev_write has been changed to pass the pointer to the struct comedi_subdevice Signed-off-by: Conrad Gomes <conrad.s.j.gomes@gmail.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Conrad Gomes authored
This is a patch which subsitutes pr_err with the preferred dev_err for device drivers in __unioxx5_digital_write. The function definition of __unioxx5_digital_write has been changed to take the pointer to the struct comedi_subdevice as a parameter instead of the pointer to struct unioxx5_subd_priv. The pointers to the stuct device and the struct unioxx5_subd_priv are obtained through the pointer to the struct comedi_subdevice in this function. The function call to __unioxx5_digital_write in unioxx5_subdev_write has been changed to pass the pointer to the struct comedi_subdevice Signed-off-by: Conrad Gomes <conrad.s.j.gomes@gmail.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Conrad Gomes authored
This is a patch which subsitutes pr_err with dev_err in __unioxx5_analog_read as it is the preferred way to log in device drivers Signed-off-by: Conrad Gomes <conrad.s.j.gomes@gmail.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Conrad Gomes authored
This is a patch which fixes coding style issues due to printk usage in unioxx5.c found by checkpatch.pl in the following functions: 1) __unioxx5_digital_read 2) __unioxx5_analog_read 3) __unioxx5_digital_config To subsitute printk with dev_err/dev_dbg, access to the struct device is required. The function definitions of the above functions have been changed to take the pointer to the struct comedi_subdevice as a parameter instead of the pointer to struct unioxx5_subd_priv. The pointers to the stuct device and the struct unioxx5_subd_priv are obtained through the pointer to the struct comedi_subdevice in these functions. The function calls of __unioxx5_digital_read and __unioxx5_analog_read in unioxx5_subdev_read have been changed to pass the pointer to the struct comedi_subdevice. Signed-off-by: Conrad Gomes <conrad.s.j.gomes@gmail.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Conrad Gomes authored
This is a patch to fix a line over 80 character warning found by checkpatch.pl in a comment. The comment was reworded to fix the warning Signed-off-by: Conrad Gomes <conrad.s.j.gomes@gmail.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Conrad Gomes authored
This is a patch to unioxx5.c that fixes the line over 80 character warning found by checkpatch.pl by initializing n_subd before the for loop Signed-off-by: Conrad Gomes <conrad.s.j.gomes@gmail.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 22 Nov, 2013 8 commits
-
-
Greg Kroah-Hartman authored
This pulls in all of the staging patches applied during the opw application process, and some other staging patches that were submitted during that period of time. All of these are for 3.14-rc1. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'ecryptfs-3.13-rc1-quiet-checkers' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull minor eCryptfs fix from Tyler Hicks: "Quiet static checkers by removing unneeded conditionals" * tag 'ecryptfs-3.13-rc1-quiet-checkers' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: file->private_data is always valid
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull second set of sound fixes from Takashi Iwai: "A collection of small fixes in HD-audio quirks and runtime PM, ASoC rcar, abs8500 and other codecs. Most of commits are for stable kernels, too" * tag 'sound-fix2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Set current_headset_type to ALC_HEADSET_TYPE_ENUM (janitorial) ALSA: hda - Provide missing pin configs for VAIO with ALC260 ALSA: hda - Add headset quirk for Dell Inspiron 3135 ALSA: hda - Fix the headphone jack detection on Sony VAIO TX ALSA: hda - Fix missing bass speaker on ASUS N550 ALSA: hda - Fix unbalanced runtime PM notification at resume ASoC: arizona: Set FLL to free-run before disabling ALSA: hda - A casual Dell Headset quirk ASoC: rcar: fixup dma_async_issue_pending() timing ASoC: rcar: off by one in rsnd_scu_set_route() ASoC: wm5110: Add post SYSCLK register patch for rev D chip ASoC: ab8500: Revert to using custom I/O functions ALSA: hda - Also enable mute/micmute LED control for "Lenovo dock" fixup ALSA: firewire-lib: include sound/asound.h to refer to snd_pcm_format_t ALSA: hda - Select FW_LOADER from CONFIG_SND_HDA_CODEC_CA0132_DSP ALSA: hda - Enable mute/mic-mute LEDs for more Thinkpads with Realtek codec ASoC: rcar: fixup mod access before checking
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull DRM fixes from Dave Airlie: "I was going to leave this until post -rc1 but sysfs fixes broke hotplug in userspace, so I had to fix it harder, otherwise a set of pulls from intel, radeon and vmware, The vmware/ttm changes are bit larger but since its early and they are unlikely to break anything else I put them in, it lets vmware work with dri3" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (36 commits) drm/sysfs: fix hotplug regression since lifetime changes drm/exynos: g2d: fix memory leak to userptr drm/i915: Fix gen3 self-refresh watermarks drm/ttm: Remove set_need_resched from the ttm fault handler drm/ttm: Don't move non-existing data drm/radeon: hook up backlight functions for CI and KV family. drm/i915: Replicate BIOS eDP bpp clamping hack for hsw drm/i915: Do not enable package C8 on unsupported hardware drm/i915: Hold pc8 lock around toggling pc8.gpu_idle drm/i915: encoder->get_config is no longer optional drm/i915/tv: add ->get_config callback drm/radeon/cik: Add macrotile mode array query drm/radeon/cik: Return backend map information to userspace drm/vmwgfx: Make vmwgfx dma buffers prime aware drm/vmwgfx: Make surfaces prime-aware drm/vmwgfx: Hook up the prime ioctls drm/ttm: Add a minimal prime implementation for ttm base objects drm/vmwgfx: Fix false lockdep warning drm/ttm: Allow execbuf util reserves without ticket drm/i915: restore the early forcewake cleanup ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI updates from Bjorn Helgaas: "Miscellaneous - Remove duplicate disable from pcie_portdrv_remove() (Yinghai Lu) - Fix whitespace, capitalization, and spelling errors (Bjorn Helgaas)" * tag 'pci-v3.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Remove duplicate pci_disable_device() from pcie_portdrv_remove() PCI: Fix whitespace, capitalization, and spelling errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target updates from Nicholas Bellinger: "Things have been quiet this round with mostly bugfixes, percpu conversions, and other minor iscsi-target conformance testing changes. The highlights include: - Add demo_mode_discovery attribute for iscsi-target (Thomas) - Convert tcm_fc(FCoE) to use percpu-ida pre-allocation - Add send completion interrupt coalescing for ib_isert - Convert target-core to use percpu-refcounting for se_lun - Fix mutex_trylock usage bug in iscsit_increment_maxcmdsn - tcm_loop updates (Hannes) - target-core ALUA cleanups + prep for v3.14 SCSI Referrals support (Hannes) v3.14 is currently shaping to be a busy development cycle in target land, with initial support for T10 Referrals and T10 DIF currently on the roadmap" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits) iscsi-target: chap auth shouldn't match username with trailing garbage iscsi-target: fix extract_param to handle buffer length corner case iscsi-target: Expose default_erl as TPG attribute target_core_configfs: split up ALUA supported states target_core_alua: Make supported states configurable target_core_alua: Store supported ALUA states target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZED target_core_alua: spellcheck target core: rename (ex,im)plict -> (ex,im)plicit percpu-refcount: Add percpu-refcount.o to obj-y iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN iscsi-target: Convert iscsi_session statistics to atomic_long_t target: Convert se_device statistics to atomic_long_t target: Fix delayed Task Aborted Status (TAS) handling bug iscsi-target: Reject unsupported multi PDU text command sequence ib_isert: Avoid duplicate iscsit_increment_maxcmdsn call iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsn target: Core does not need blkdev.h target: Pass through I/O topology for block backstores iser-target: Avoid using FRMR for single dma entry requests ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon fixes from Guenter Roeck: - acpi_power_meter: Fix return value check from call to acpi_bus_get_device - nct6775: Fix/improve NCT6791 support - lm75: Add support for GMT G751 * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (acpi_power_meter) Fix acpi_bus_get_device() return value check hwmon: (nct6775) NCT6791 supports weight control only for CPUFAN hwmon: (nct6775) Monitor additional temperature registers hwmon: (lm75) Add support for GMT G751 chip
-