Merge tag 'md-6.11-20240612' of git://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.11/block

Pull MD updates from Song:

"The major changes in this PR are:

 - sync_action fix and refactoring, by Yu Kuai;
 - Various small fixes by Christoph Hellwig, Li Nan, and Ofir Gal."

* tag 'md-6.11-20240612' of git://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md/raid5: avoid BUG_ON() while continue reshape after reassembling
  md: pass in max_sectors for pers->sync_request()
  md: factor out helpers for different sync_action in md_do_sync()
  md: replace last_sync_action with new enum type
  md: use new helpers in md_do_sync()
  md: don't fail action_store() if sync_thread is not registered
  md: remove parameter check_seq for stop_sync_thread()
  md: replace sysfs api sync_action with new helpers
  md: factor out helper to start reshape from action_store()
  md: add new helpers for sync_action
  md: add a new enum type sync_action
  md: rearrange recovery_flags
  md/md-bitmap: fix writing non bitmap pages
  md/raid1: don't free conf on raid0_run failure
  md/raid0: don't free conf on raid0_run failure
  md: make md_flush_request() more readable
  md: fix deadlock between mddev_suspend and flush bio
  md: change the return value type of md_write_start to void
  md: do not delete safemode_timer in mddev_suspend

Currently, mdadm support --revert-reshape to abort the reshape while
reassembling, as the test 07revert-grow. However, following BUG_ON()
can be triggerred by the test:

kernel BUG at drivers/md/raid5.c:6278!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
irq event stamp: 158985
CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94
RIP: 0010:reshape_request+0x3f1/0xe60
Call Trace:
 <TASK>
 raid5_sync_request+0x43d/0x550
 md_do_sync+0xb7a/0x2110
 md_thread+0x294/0x2b0
 kthread+0x147/0x1c0
 ret_from_fork+0x59/0x70
 ret_from_fork_asm+0x1a/0x30
 </TASK>

Root cause is that --revert-reshape update the raid_disks from 5 to 4,
while reshape position is still set, and after reassembling the array,
reshape position will be read from super block, then during reshape the
checking of 'writepos' that is caculated by old reshape position will
fail.

Fix this panic the easy way first, by converting the BUG_ON() to
WARN_ON(), and stop the reshape if checkings fail.

Noted that mdadm must fix --revert-shape as well, and probably md/raid
should enhance metadata validation as well, however this means
reassemble will fail and there must be user tools to fix the wrong
metadata.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-13-yukuai1@huaweicloud.com

For different sync_action, sync_thread will use different max_sectors,
see details in md_sync_max_sectors(), currently both md_do_sync() and
pers->sync_request() in eatch iteration have to get the same
max_sectors. Hence pass in max_sectors for pers->sync_request() to
prevent redundant code.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-12-yukuai1@huaweicloud.com

Make code cleaner by replacing if else if with switch, and it's more
obvious now what is doing for each sync_action. There are no
functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-11-yukuai1@huaweicloud.com

The only difference is that "none" is removed and initial
last_sync_action will be idle.

On the one hand, this value is introduced by commit c4a39551
("MD: Remember the last sync operation that was performed"), and the
usage described in commit message is not affected. On the other hand,
last_sync_action is not used in mdadm or mdmon, and none of the tests
that I can find.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-10-yukuai1@huaweicloud.com

Make code cleaner. and also use the action_name directly in kernel log:
 - "check" instead of "data-check"
 - "repair" instead of "requested-resync"
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-9-yukuai1@huaweicloud.com

MD_RECOVERY_RUNNING will always be set when trying to register a new
sync_thread, however, if md_start_sync() turns out to do nothing,
MD_RECOVERY_RUNNING will be cleared in this case. And during the race
window, action_store() will return -EBUSY, which will cause some
mdadm tests to fail. For example:

The test 07reshape5intr will add a new disk to array, then start
reshape:

mdadm /dev/md0 --add /dev/xxx
mdadm --grow /dev/md0 -n 3

And add_bound_rdev() from mdadm --add will set MD_RECOVERY_NEEDED,
then during the race windown, mdadm --grow will fail.

Fix the problem by waiting in action_store() during the race window,
fail only if sync_thread is registered.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-8-yukuai1@huaweicloud.com

Caller will always set MD_RECOVERY_FROZEN if check_seq is true, and
always clear MD_RECOVERY_FROZEN if check_seq is false, hence replace
the parameter with test_bit() to make code cleaner.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-7-yukuai1@huaweicloud.com

To get rid of extrem long if else if usage, and make code cleaner.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-6-yukuai1@huaweicloud.com

There are no functional changes, just to make code cleaner and prepare
for following refactor.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-5-yukuai1@huaweicloud.com

The new helpers will get current sync_action of the array, will be used
in later patches to make code cleaner.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-4-yukuai1@huaweicloud.com

In order to make code related to sync_thread cleaner in following
patches, also add detail comment about each sync action. And also
prepare to remove the related recovery_flags in the fulture.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-3-yukuai1@huaweicloud.com

Currently there are lots of flags with the same confusing prefix
"MD_REOCVERY_", and there are two main types of flags, sync thread runnng
status, I prefer prefix "SYNC_THREAD_", and sync thread action, I perfer
prefix "SYNC_ACTION_".

For now, rearrange and update comment to improve code readability,
there are no functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-2-yukuai1@huaweicloud.com

__write_sb_page() rounds up the io size to the optimal io size if it
doesn't exceed the data offset, but it doesn't check the final size
exceeds the bitmap length.

For example:
page count      - 1
page size       - 4K
data offset     - 1M
optimal io size - 256K

The final io size would be 256K (64 pages) but md_bitmap_storage_alloc()
allocated 1 page, the IO would write 1 valid page and 63 pages that
happens to be allocated afterwards. This leaks memory to the raid device
superblock.

This issue caused a data transfer failure in nvme-tcp. The network
drivers checks the first page of an IO with sendpage_ok(), it returns
true if the page isn't a slabpage and refcount >= 1. If the page
!sendpage_ok() the network driver disables MSG_SPLICE_PAGES.

As of now the network layer assumes all the pages of the IO are
sendpage_ok() when MSG_SPLICE_PAGES is on.

The bitmap pages aren't slab pages, the first page of the IO is
sendpage_ok(), but the additional pages that happens to be allocated
after the bitmap pages might be !sendpage_ok(). That cause
skb_splice_from_iter() to stop the data transfer, in the case below it
hangs 'mdadm --create'.

The bug is reproducible, in order to reproduce we need nvme-over-tcp
controllers with optimal IO size bigger than PAGE_SIZE. Creating a raid
with bitmap over those devices reproduces the bug.

In order to simulate large optimal IO size you can use dm-stripe with a
single device.
Script to reproduce the issue on top of brd devices using dm-stripe is
attached below (will be added to blktest).

I have added some logs to test the theory:
...
md: created bitmap (1 pages) for device md127
__write_sb_page before md_super_write offset: 16, size: 262144. pfn: 0x53ee
=== __write_sb_page before md_super_write. logging pages ===
pfn: 0x53ee, slab: 0 <-- the only page that allocated for the bitmap
pfn: 0x53ef, slab: 1
pfn: 0x53f0, slab: 0
pfn: 0x53f1, slab: 0
pfn: 0x53f2, slab: 0
pfn: 0x53f3, slab: 1
...
nvme_tcp: sendpage_ok - pfn: 0x53ee, len: 262144, offset: 0
skbuff: before sendpage_ok() - pfn: 0x53ee
skbuff: before sendpage_ok() - pfn: 0x53ef
WARNING at net/core/skbuff.c:6848 skb_splice_from_iter+0x142/0x450
skbuff: !sendpage_ok - pfn: 0x53ef. is_slab: 1, page_count: 1
...

Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ofir Gal <ofir.gal@volumez.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240607072748.3182199-1-ofir.gal@volumez.com

The core md code calls the ->free method which already frees conf.

Fixes: 07f1a685 ("md/raid1: fail run raid1 array when active disk less than one")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240604172607.3185916-3-hch@lst.de

The core md code calls the ->free method which already frees conf.

Fixes: 0c031fd3 ("md: Move alloc/free acct bioset in to personality")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240604172607.3185916-2-hch@lst.de

Setting bio to NULL and checking 'if(!bio)' is redundant and looks strange,
just consolidate them into one condition. There are no functional changes.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240528203149.2383260-1-linan666@huaweicloud.com

Deadlock occurs when mddev is being suspended while some flush bio is in
progress. It is a complex issue.

T1. the first flush is at the ending stage, it clears 'mddev->flush_bio'
    and tries to submit data, but is blocked because mddev is suspended
    by T4.
T2. the second flush sets 'mddev->flush_bio', and attempts to queue
    md_submit_flush_data(), which is already running (T1) and won't
    execute again if on the same CPU as T1.
T3. the third flush inc active_io and tries to flush, but is blocked because
    'mddev->flush_bio' is not NULL (set by T2).
T4. mddev_suspend() is called and waits for active_io dec to 0 which is inc
    by T3.

  T1		T2		T3		T4
  (flush 1)	(flush 2)	(third 3)	(suspend)
  md_submit_flush_data
   mddev->flush_bio = NULL;
   .
   .	 	md_flush_request
   .	  	 mddev->flush_bio = bio
   .	  	 queue submit_flushes
   .		 .
   .		 .		md_handle_request
   .		 .		 active_io + 1
   .		 .		 md_flush_request
   .		 .		  wait !mddev->flush_bio
   .		 .
   .		 .				mddev_suspend
   .		 .				 wait !active_io
   .		 .
   .		 submit_flushes
   .		 queue_work md_submit_flush_data
   .		 //md_submit_flush_data is already running (T1)
   .
   md_handle_request
    wait resume

The root issue is non-atomic inc/dec of active_io during flush process.
active_io is dec before md_submit_flush_data is queued, and inc soon
after md_submit_flush_data() run.
  md_flush_request
    active_io + 1
    submit_flushes
      active_io - 1
      md_submit_flush_data
        md_handle_request
        active_io + 1
          make_request
        active_io - 1

If active_io is dec after md_handle_request() instead of within
submit_flushes(), make_request() can be called directly intead of
md_handle_request() in md_submit_flush_data(), and active_io will
only inc and dec once in the whole flush process. Deadlock will be
fixed.

Additionally, the only difference between fixing the issue and before is
that there is no return error handling of make_request(). But after
previous patch cleaned md_write_start(), make_requst() only return error
in raid5_make_request() by dm-raid, see commit 41425f96 ("dm-raid456,
md/raid456: fix a deadlock for dm-raid456 while io concurrent with
reshape)". Since dm always splits data and flush operation into two
separate io, io size of flush submitted by dm always is 0, make_request()
will not be called in md_submit_flush_data(). To prevent future
modifications from introducing issues, add WARN_ON to ensure
make_request() no error is returned in this context.

Fixes: fa2bbff7 ("md: synchronize flush io with array reconfiguration")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240525185257.3896201-3-linan666@huaweicloud.com

Commit cc27b0c7 ("md: fix deadlock between mddev_suspend() and
md_write_start()") aborted md_write_start() with false when mddev is
suspended, which fixed a deadlock if calling mddev_suspend() with
holding reconfig_mutex(). Since mddev_suspend() now includes
lockdep_assert_not_held(), it no longer holds the reconfig_mutex. This
makes previous abort unnecessary. Now, remove unnecessary abort and
change function return value to void.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240525185257.3896201-2-linan666@huaweicloud.com

The deletion of safemode_timer in mddev_suspend() is redundant and
potentially harmful now. If timer is about to be woken up but gets
deleted, 'in_sync' will remain 0 until the next write, causing array
to stay in the 'active' state instead of transitioning to 'clean'.

Commit 0d9f4f13 ("MD: Add del_timer_sync to mddev_suspend (fix
nasty panic))" introduced this deletion for dm, because if timer fired
after dm is destroyed, the resource which the timer depends on might
have been freed.

However, commit 0dd84b31 ("md: call __md_stop_writes in md_stop")
added __md_stop_writes() to md_stop(), which is called before freeing
resource. Timer is deleted in __md_stop_writes(), and the origin issue
is resolved. Therefore, delete safemode_timer can be removed safely now.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240508092053.1447930-1-linan666@huaweicloud.com

Merge tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Update copies of kernel headers, which resulted in support for the
   new 'mseal' syscall, SUBVOL statx return mask bit, RISC-V and PPC
   prctls, fcntl's DUPFD_QUERY, POSTED_MSI_NOTIFICATION IRQ vector,
   'map_shadow_stack' syscall for x86-32.

 - Revert perf.data record memory allocation optimization that ended up
   causing a regression, work is being done to re-introduce it in the
   next merge window.

 - Fix handling of minimal vmlinux.h file used with BPF's CO-RE when
   interrupting the build.

* tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  perf bpf: Fix handling of minimal vmlinux.h file when interrupting the build
  Revert "perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event"
  tools headers arm64: Sync arm64's cputype.h with the kernel sources
  tools headers uapi: Sync linux/stat.h with the kernel sources to pick STATX_SUBVOL
  tools headers UAPI: Update i915_drm.h with the kernel sources
  tools headers UAPI: Sync kvm headers with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers: Update the syscall tables and unistd.h, mostly to support the new 'mseal' syscall
  perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources to pick POSTED_MSI_NOTIFICATION
  perf beauty: Update copy of linux/socket.h with the kernel sources
  tools headers UAPI: Sync fcntl.h with the kernel sources to pick F_DUPFD_QUERY
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools include UAPI: Sync linux/stat.h with the kernel sources

Pull EDAC fixes from Borislav Petkov:

 - Convert PCI core error codes to proper error numbers since latter get
   propagated all the way up to the module loading functions

* tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/igen6: Convert PCIBIOS_* return codes to errnos
  EDAC/amd64: Convert PCIBIOS_* return codes to errnos

Pull clk fix from Stephen Boyd:
 "One fix for the SiFive PRCI clocks so that the device boots again.

  This driver was registering clkdev lookups that were always going to
  be useless. This wasn't a problem until clkdev started returning an
  error in these cases, causing this driver to fail probe, and thus boot
  to fail because clks are essential for most drivers. The fix is
  simple, don't use clkdev because this is a DT based system where
  clkdev isn't used"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sifive: Do not register clkdevs for PRCI clocks

Pull smb client fixes from Steve French:
 "Two small smb3 client fixes:

   - fix deadlock in umount

   - minor cleanup due to netfs change"

* tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Don't advance the I/O iterator before terminating subrequest
  smb: client: fix deadlock in smb2_find_smb_tcon()

Pull HID fixes from Benjamin Tissoires:

 - fix potential read out of bounds in hid-asus (Andrew Ballance)

 - fix endian-conversion on little endian systems in intel-ish-hid (Arnd
   Bergmann)

 - A couple of new input event codes (Aseda Aboagye)

 - errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
   (Christophe JAILLET), hid-logitech-dj (José Expósito)

 - current leakage fix while the device is in suspend on a i2c-hid
   laptop (Johan Hovold)

 - other assorted smaller fixes and device ID / quirk entry additions

* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Ignore battery for ELAN touchscreens 2F2C and 4116
  HID: i2c-hid: elan: fix reset suspend current leakage
  dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
  dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
  dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
  input: Add support for "Do Not Disturb"
  input: Add event code for accessibility key
  hid: asus: asus_report_fixup: fix potential read out of bounds
  HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
  HID: intel-ish-hid: fix endian-conversion
  HID: nintendo: Fix an error handling path in nintendo_hid_probe()
  HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
  HID: core: remove unnecessary WARN_ON() in implement()
  HID: nvidia-shield: Add missing check for input_ff_create_memless
  HID: intel-ish-hid: Fix build error for COMPILE_TEST

Merge tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix the initial state of the save button in 'make gconfig'

 - Improve the Kconfig documentation

 - Fix a Kconfig bug regarding property visibility

 - Fix build breakage for systems where 'sed' is not installed in /bin

 - Fix a false warning about missing MODULE_DESCRIPTION()

* tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  modpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o
  kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh
  kconfig: remove wrong expr_trans_bool()
  kconfig: doc: document behavior of 'select' and 'imply' followed by 'if'
  kconfig: doc: fix a typo in the note about 'imply'
  kconfig: gconf: give a proper initial state to the Save button
  kconfig: remove unneeded code for user-supplied values being out of range

Pull media fixes from Mauro Carvalho Chehab:

 - fixes for the new ipu6 driver (and related fixes to mei csi driver)

 - fix a double debugfs remove logic at mgb4 driver

 - a documentation fix

* tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: intel/ipu6: add csi2 port sanity check in notifier bound
  media: intel/ipu6: update the maximum supported csi2 port number to 6
  media: mei: csi: Warn less verbosely of a missing device fwnode
  media: mei: csi: Put the IPU device reference
  media: intel/ipu6: fix the buffer flags caused by wrong parentheses
  media: intel/ipu6: Fix an error handling path in isys_probe()
  media: intel/ipu6: Move isys_remove() close to isys_probe()
  media: intel/ipu6: Fix some redundant resources freeing in ipu6_pci_remove()
  media: Documentation: v4l: Fix ACTIVE route flag
  media: mgb4: Fix double debugfs remove

Pull irq fixes from Ingo Molnar:

 - Fix possible memory leak the riscv-intc irqchip driver load failures

 - Fix boot crash in the sifive-plic irqchip driver caused by recently
   changed boot initialization order

 - Fix race condition in the gic-v3-its irqchip driver

* tag 'irq-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()
  irqchip/sifive-plic: Chain to parent IRQ after handlers are ready
  irqchip/riscv-intc: Prevent memory leak when riscv_intc_init_common() fails

Pull x86 fixes from Ingo Molnar:
 "Miscellaneous fixes:

   - Fix kexec() crash if call depth tracking is enabled

   - Fix SMN reads on inaccessible registers on certain AMD systems"

* tag 'x86-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/amd_nb: Check for invalid SMN reads
  x86/kexec: Fix bug with call depth tracking

Pull perf event fix from Ingo Molnar:
 "Fix race between perf_event_free_task() and perf_event_release_kernel()
  that can result in missed wakeups and hung tasks"

* tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix missing wakeup when waiting for context reference

Pull locking doc fix from Ingo Molnar:
 "Fix typos in the kerneldoc of some of the atomic APIs"

* tag 'locking-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: scripts: fix ${atomic}_sub_and_test() kerneldoc

Merge tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "14 hotfixes, 6 of which are cc:stable.

  All except the nilfs2 fix affect MM and all are singletons - see the
  chagelogs for details"

* tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
  mm: fix xyz_noprof functions calling profiled functions
  codetag: avoid race at alloc_slab_obj_exts
  mm/hugetlb: do not call vma_add_reservation upon ENOMEM
  mm/ksm: fix ksm_zero_pages accounting
  mm/ksm: fix ksm_pages_scanned accounting
  kmsan: do not wipe out origin when doing partial unpoisoning
  vmalloc: check CONFIG_EXECMEM in is_vmalloc_or_module_addr()
  mm: page_alloc: fix highatomic typing in multi-block buddies
  nilfs2: fix potential kernel bug due to lack of writeback flag waiting
  memcg: remove the lockdep assert from __mod_objcg_mlstate()
  mm: arm64: fix the out-of-bounds issue in contpte_clear_young_dirty_ptes
  mm: huge_mm: fix undefined reference to `mthp_stats' for CONFIG_SYSFS=n
  mm: drop the 'anon_' prefix for swap-out mTHP counters

Pull gpio fixes from Bartosz Golaszewski:

 - interrupt handling and Kconfig fixes for gpio-tqmx86

 - add a buffer for storing output values in gpio-tqmx86 as reading back
   the registers always returns the input values

 - add missing MODULE_DESCRIPTION()s to several GPIO drivers

* tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: add missing MODULE_DESCRIPTION() macros
  gpio: tqmx86: fix broken IRQ_TYPE_EDGE_BOTH interrupt type
  gpio: tqmx86: store IRQ trigger type and unmask status separately
  gpio: tqmx86: introduce shadow register for GPIO output value
  gpio: tqmx86: fix typo in Kconfig label

Pull block fixes from Jens Axboe:

 - Fix for null_blk block size validation (Andreas)

 - NVMe pull request via Keith:
      - Use reserved tags for special fabrics operations (Chunguang)
      - Persistent Reservation status masking fix (Weiwen)

* tag 'block-6.10-20240607' of git://git.kernel.dk/linux:
  null_blk: fix validation of block size
  nvme: fix nvme_pr_* status code parsing
  nvme-fabrics: use reserved tag for reg read/write command

Pull io_uring fixes from Jens Axboe:

 - Fix a locking order issue with setting max async thread workers
   (Hagar)

 - Fix for a NULL pointer dereference for failed async flagged requests
   using ring provided buffers. This doesn't affect the current kernel,
   but it does affect older kernels, and is being queued up for 6.10
   just to make the stable process easier (me)

 - Fix for NAPI timeout calculations for how long to busy poll, and
   subsequently how much to sleep post that if a wait timeout is passed
   in (me)

 - Fix for a regression in this release cycle, where we could end up
   using a partially unitialized match value for io-wq (Su)

* tag 'io_uring-6.10-20240607' of git://git.kernel.dk/linux:
  io_uring: fix possible deadlock in io_register_iowq_max_workers()
  io_uring/io-wq: avoid garbage value of 'match' in io_wq_enqueue()
  io_uring/napi: fix timeout calculation
  io_uring: check for non-NULL file pointer in io_file_can_poll()

Pull btrfs fixes from David Sterba:

 - fix handling of folio private changes.

   The private value holds pointer to our extent buffer structure
   representing a metadata range. Release and create of the range was
   not properly synchronized when updating the private bit which ended
   up in double folio_put, leading to all sorts of breakage

 - fix a crash, reported as duplicate key in metadata, but caused by a
   race of fsync and size extending write. Requires prealloc target
   range + fsync and other conditions (log tree state, timing)

 - fix leak of qgroup extent records after transaction abort

* tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: protect folio::private when attaching extent buffer folios
  btrfs: fix leak of qgroup extent records after transaction abort
  btrfs: fix crash on racing fsync and size-extending write into prealloc

Pull nfsd fix from Chuck Lever:

 - Fix an occasional memory overwrite caused by a fix added in 6.10

* tag 'nfsd-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Fix loop termination condition in gss_free_in_token_pages()

Pull RISC-V fixes from Palmer Dabbelt:

 - Another fix to avoid allocating pages that overlap with ERR_PTR,
   which manifests on rv32

 - A revert for the badaccess patch I incorrectly picked up an early
   version of

* tag 'riscv-for-linus-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  Revert "riscv: mm: accelerate pagefault when badaccess"
  riscv: fix overlap of allocated page and PTR_ERR

Pull s390 fixes from Alexander Gordeev:

 - Do not create PT_LOAD program header for the kenel image when the
   virtual memory informaton in OS_INFO data is not available. That
   fixes stand-alone dump failures against kernels that do not provide
   the virtual memory informaton

 - Add KVM s390 shared zeropage selftest

* tag 's390-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  KVM: s390x: selftests: Add shared zeropage test
  s390/crash: Do not use VM info if os_info does not have it