Explicitly clear the "in-syscall" bit when we have no signal
handler and back up the program counters to back up the system
call.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't invoke the signal handler tracehook in that situation
either.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

If another cpu does a very wide munmap() on the signal frame area,
it can tear down the page table hierarchy from underneath us.

Borrow an idea from the 64-bit fault path's get_user_insn(), and
disable cross call interrupts during the page table traversal
to lock them in place while we operate.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Encoding is "(encoding << 16) | pic_mask"
Signed-off-by: David S. Miller <davem@davemloft.net>

They were all bogus artifacts and completely unnecessary.
Signed-off-by: David S. Miller <davem@davemloft.net>

This is based upon a report by Meelis Roos showing that it's possible
that we'll try to fetch a property that is 32K in size with some
devices.  With the current fixed 3K buffer we use for moving data in
and out of the firmware during PROM calls, that simply won't work.

In fact, it will scramble random kernel data during bootup.

The reasoning behind the temporary buffer is entirely historical.  It
used to be the case that we had problems referencing dynamic kernel
memory (including the stack) early in the boot process before we
explicitly told the firwmare to switch us over to the kernel trap
table.

So what we did was always give the firmware buffers that were locked
into the main kernel image.

But we no longer have problems like that, so get rid of all of this
indirect bounce buffering.

Besides fixing Meelis's bug, this also makes the kernel data about 3K
smaller.

It was also discovered during these conversions that the
implementation of prom_retain() was completely wrong, so that was
fixed here as well.  Currently that interface is not in use.
Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the code were already aligned to 64 bytes, wr instruction would be executed
twice --- once in delay slot and once in the jump target.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As noticed by Mikulas Patocka, the backoff macros don't
completely nop out for UP builds, we still get a
branch always and a delay slot nop.

Fix this by making the branch to the backoff spin loop
selective, then we can nop out the spin loop completely.
Signed-off-by: David S. Miller <davem@davemloft.net>

Simple microoptimizations for sparc64 atomic functions:
Save one instruction by using a delay slot.
Use %g1 instead of %g7, because %g1 is written earlier.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Basically tip-off the powerpc code, use a 64-bit type and atomic64_t
interfaces for the implementation.

This gets us off of the by-hand asm code I wrote, which frankly I
think probably ruins I-cache hit rates.

The idea was the keep the call chains less deep, but anything taking
the rw-semaphores probably is also calling other stuff and therefore
already has allocated a stack-frame.  So no real stack frame savings
ever.

Ben H. has posted patches to make powerpc use 64-bit too and with some
abstractions we can probably use a shared header file somewhere.

With suggestions from Sam Ravnborg.
Signed-off-by: David S. Miller <davem@davemloft.net>

Linus noticed that some of the interface arguments
didn't get "int" --> "long" conversion, as needed.
Signed-off-by: David S. Miller <davem@davemloft.net>

Should return 'long' instead of 'int'.

Thanks to Dimitris Michailidis and Tony Luck.
Signed-off-by: David S. Miller <davem@davemloft.net>

As noticed by Linus, it is critical that some of the
rwsem constants be signed.  Yet, hex constants are
unsigned unless explicitly casted or negated.

The most critical one is RWSEM_WAITING_BIAS.

This bug was exacerbated by commit
424acaae ("rwsem: wake queued readers
when writer blocks on active read lock")
Signed-off-by: David S. Miller <davem@davemloft.net>

The only tricky bit is the compat version of fanotify_mark, which
which on 32-bit the 64-bit mark argument is passed in as "high32",
"low32".
Signed-off-by: David S. Miller <davem@davemloft.net>

If a video head and keyboard are hooked up, specifying "console=ttyS0"
or similar to use a serial console will not work properly.

The key issue is that we must register all serial console capable
devices with register_console(), otherwise the command line specified
device won't be found.  The sun serial drivers would only register
themselves as console devices if the OpenFirmware specified console
device node matched.  To fix this part we now unconditionally get
the serial console register by setting serial_drv->cons always.

Secondarily we must not add_preferred_console() using the firmware
provided console setting if the user gaven an override on the kernel
command line using "console="  The "primary framebuffer" matching
logic was always triggering o n openfirmware device node match, make
it not when a command line override was given.
Reported-by: Frans Pop <elendil@planet.nl>
Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  gcc-4.6: ACPI: fix unused but set variables in ACPI
  ACPI thermal: make procfs I/F depend on CONFIG_ACPI_PROCFS
  ACPI video: make procfs I/F depend on CONFIG_ACPI_PROCFS
  ACPI processor: remove deprecated ACPI procfs I/F
  ACPI power_resource: remove unused procfs I/F
  ACPI: remove deprecated ACPI procfs I/F
  ACPI: introduce drivers/acpi/sysfs.c
  ACPI: introduce module parameter acpi.aml_debug_output
  ACPI: introduce drivers/acpi/debugfs.c
  ACPI, APEI, ERST debug support
  ACPI, APEI, Manage GHES as platform devices
  ACPI, APEI, Rename CPER and GHES severity constants
  ACPI, APEI, Fix a typo of error path of apei_resources_request
  ACPI / ACPICA: Fix reference counting problems with GPE handlers
  ACPI: Add the check of ADR flag in course of finding ACPI handle for PCI device
  ACPI / Sleep: Drop acpi_suspend_finish()
  ACPI / Sleep: Consolidate suspend and hibernation routines
  ACPI / Wakeup: Simplify enabling of wakeup devices
  ACPI / Sleep: Rework enabling wakeup devices
  ACPI / Sleep: Free NVS copy if suspending of devices fails

Fixed up totally buggered "ACPI: fix unused but set variables in ACPI"
patch that doesn't even compile in the merge.

Thanks to Sedat Dilek <sedat.dilek@googlemail.com> for noticing the
breakage before I even pulled.  And a big "Grrr.." at Len for not even
bothering to compile the tree before asking me to pull.

* git://git.infradead.org/iommu-2.6:
  intel-iommu: Fix 32-bit build warning with __cmpxchg()
  intr-remap: allow disabling source id checking

* git://git.infradead.org/mtd-2.6:
  mtd/nand_ids: Fix buswidth
  mtd/m25p80: fix test for end of loop
  mtd/m25p80: retlen is never NULL
  MIPS: Fix gen_nand probe structures contents
  gen_nand: Test if nr_chips field is valid
  BFIN: Fix gen_nand probe structures contents
  nand/denali: move all hardware initialization work to denali_hw_init
  nand/denali: Add a page check in denali_read_page & denali_read_page_raw
  nand/denali: use cpu_relax() while waiting for hardware interrupt
  nand/denali: change read_status function method
  nand/denali: Fixed check patch warnings
  ARM: Fix gen_nand probe structures contents
  mtd/nand_base: fix kernel-doc warnings & typos
  nand/denali: use dev_xx debug function to replace nand_dbg_print and some printk
  nand/denali: Fixed handle ECC error bugs
  nand/denali: use iowrite32() to replace denali_write32()
  nand/denali: Fixed probe function bugs

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: don't validate CROSS_COMPILE needlessly
  arch/tile: export only COMMAND_LINE_SIZE to userspace.
  arch/tile: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN
  arch/tile: Rename the hweight() implementations to __arch_hweight()
  arch/tile: extend syscall ABI to set r1 on return as well.
  arch/tile: Various cleanups.
  arch/tile: support backtracing on TILE-Gx
  arch/tile: Fix a couple of issues with the COMPAT code for TILE-Gx.
  arch/tile: Use separate, better minsec values for clocksource and sched_clock.
  arch/tile: correct a bug in freeing bootmem by VA for the optional second initrd.
  arch: tile: mm: pgtable.c: Removed duplicated #include
  arch: tile: kernel/proc.c Removed duplicated #include
  Add fanotify syscalls to <asm-generic/unistd.h>.
  arch/tile: support new kunmap_atomic() naming convention.
  tile: remove unused ISA_DMA_THRESHOLD define

Conflicts in arch/tile/configs/tile_defconfig (pick the mainline version
with the reduced defconfig).

With this change, the arch/tile Makefile will only check for a valid
combination of CROSS_COMPILE vs "uname -m" for a few common targets
that are typically the ones we get wrong (vmlinux, all, and modules).
The change handles the case of an empty "make" goal like "make all".
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

This commit makes the stack guard page somewhat less visible to user
space. It does this by:

 - not showing the guard page in /proc/<pid>/maps

   It looks like lvm-tools will actually read /proc/self/maps to figure
   out where all its mappings are, and effectively do a specialized
   "mlockall()" in user space.  By not showing the guard page as part of
   the mapping (by just adding PAGE_SIZE to the start for grows-up
   pages), lvm-tools ends up not being aware of it.

 - by also teaching the _real_ mlock() functionality not to try to lock
   the guard page.

   That would just expand the mapping down to create a new guard page,
   so there really is no point in trying to lock it in place.

It would perhaps be nice to show the guard page specially in
/proc/<pid>/maps (or at least mark grow-down segments some way), but
let's not open ourselves up to more breakage by user space from programs
that depends on the exact deails of the 'maps' file.

Special thanks to Henrique de Moraes Holschuh for diving into lvm-tools
source code to see what was going on with the whole new warning.

Reported-and-tested-by: François Valenduc <francois.valenduc@tvcablenet.be
Reported-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: sound/usb/format: silence uninitialized variable warnings
  MAINTAINERS: Add Ian Lartey as comaintaner for Wolfson devices
  MAINTAINERS: Make Wolfson entry also cover CODEC drivers
  ASoC: Only tweak WM8994 chip configuration on devices up to rev D
  ASoC: Optimise DSP performance for WM8994
  ALSA: hda - Fix dynamic ADC change working again
  ALSA: hda - Restrict PCM parameters per ELD information over HDMI
  sound: oss: sh_dac_audio.c removed duplicated #include

* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  intel_idle: recognize Lincroft Atom Processor
  intel_idle: no longer EXPERIMENTAL
  intel_idle: disable module support
  intel_idle: add support for Westmere-EX
  intel_idle: delete power_policy modparam, and choose substate functions
  intel_idle: delete substates DEBUG modparam

This fixes a failure in "make headers_check" for tile.
I hadn't realized this file was exported to userspace by default.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

See commit a6eb9fe1.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>

Gcc complains that ret might be used uninitialized:

sound/usb/format.c: In function ‘snd_usb_parse_audio_format’:
sound/usb/format.c:354: warning: ‘ret’ may be used uninitialized in this function
sound/usb/format.c:354: note: ‘ret’ was declared here
sound/usb/format.c:414: warning: ‘ret’ may be used uninitialized in this function
sound/usb/format.c:414: note: ‘ret’ was declared here

I suppose it could be uninitialized if there is ever a UAC_VERSION_3
released. Anyway this patch is worthwhile if only to silence the gcc
warning.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Conflicts:
	drivers/acpi/debug.c
Signed-off-by: Len Brown <len.brown@intel.com>

Some minor improvements in error handling, but overall it was mostly dead
code.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

Mark the ACPI thermal procfs I/F deprecated, because /sys/class/thermal/
is already available and has been working for years w/o any problem.

The ACPI thermal procfs I/F will be removed in 2.6.37.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Mark ACPI video driver procfs I/F deprecated, including:
/proc/acpi/video/*/info
/proc/acpi/video/*/DOS
/proc/acpi/video/*/ROM
/proc/acpi/video/*/POST
/proc/acpi/video/*/POST_info
/proc/acpi/video/*/*/info
/proc/acpi/video/*/*/state
/proc/acpi/video/*/*/EDID
and
/proc/acpi/video/*/*/brightness, because
1. we already have the sysfs I/F /sysclass/backlight/ as the replacement
of /proc/acpi/video/*/*/brightness.
2. the other procfs I/F is not useful for userspace.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Remove deprecated ACPI processor procfs I/F, including:
/proc/acpi/processor/CPUX/power
/proc/acpi/processor/CPUX/limit
/proc/acpi/processor/CPUX/info

/proc/acpi/processor/CPUX/throttling still exists,
as we don't have sysfs I/F available for now.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Remove unused ACPI power procfs I/F.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Rmove deprecated ACPI procfs I/F, including
/proc/acpi/debug_layer
/proc/acpi/debug_level
/proc/acpi/info
/proc/acpi/dsdt
/proc/acpi/fadt
/proc/acpi/sleep

because the sysfs I/F is already available
and has been working well for years.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Introduce drivers/acpi/sysfs.c.

code for ACPI sysfs I/F, including
#ifdef ACPI_DEBUG
/sys/module/acpi/parameters/debug_layer
/sys/module/acpi/parameters/debug_level
/sys/module/acpi/parameters/trace_method_name
/sys/module/acpi/parameters/trace_debug_layer
/sys/module/acpi/parameters/trace_debug_level
/sys/module/acpi/parameters/trace_state
#endif
/sys/module/acpi/parameters/acpica_version
/sys/firmware/acpi/tables/
/sys/firmware/acpi/interrupts/
is moved to this file.

No function change in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>