- 27 Sep, 2022 2 commits
-
-
Pavel Begunkov authored
If a retry io_setup_async_rw() fails we lose result from the first io_iter_do_read(), which is a problem mostly for streams/sockets. Cc: stable@vger.kernel.org Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0e8d20cebe5fc9c96ed268463c394237daabc384.1664235732.git.asml.silence@gmail.comSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
req->cqe.res is set in io_read() to the amount of bytes left to be done, which is used to figure out whether to fail a read or not. However, io_read() may do another without returning, and we stash the previous value into ->bytes_done but forget to update cqe.res. Then we ask a read to do strictly less than cqe.res but expect the return to be exactly cqe.res. Fix the bug by updating cqe.res for retries. Cc: stable@vger.kernel.org Reported-and-Tested-by:
Beld Zhang <beldzhang@gmail.com> Signed-off-by:
-
- 26 Sep, 2022 1 commit
-
-
Pavel Begunkov authored
Having ->async_data doesn't mean it's initialised and previously we vere relying on setting F_CLEANUP at the right moment. With zc sendmsg though, we set F_CLEANUP early in prep when we alloc a notif and so we may allocate async_data, fail in copy_msg_hdr() leaving struct io_async_msghdr not initialised correctly but with F_CLEANUP set, which causes a ->free_iov double free and probably other nastiness. Always initialise ->free_iov. Also, now it might point to fast_iov when fails, so avoid freeing it during cleanups. Reported-by: syzbot+edfd15cd4246a3fc615a@syzkaller.appspotmail.com Fixes: 493108d9 ("io_uring/net: zerocopy sendmsg") Signed-off-by:
-
- 23 Sep, 2022 3 commits
-
-
Pavel Begunkov authored
Overflowing CQEs may result in reordering, which is buggy in case of links, F_MORE and so on. If we guarantee that we don't reorder for the unlikely event of a CQ ring overflow, then we can further extend this to not have to terminate multishot requests if it happens. For other operations, like zerocopy sends, we have no choice but to honor CQE ordering. Reported-by:
Dylan Yudaken <dylany@fb.com> Signed-off-by:
-
Pavel Begunkov authored
We should not assume anything about ->free_iov just from REQ_F_ASYNC_DATA but rather rely on REQ_F_NEED_CLEANUP, as we may allocate ->async_data but failed init would leave the field in not consistent state. The easiest solution is to remove removing REQ_F_NEED_CLEANUP and so ->async_data dealloc from io_sendrecv_fail() and let io_send_zc_cleanup() do the job. The catch here is that we also need to prevent double notif flushing, just test it for NULL and zero where it's needed. BUG: KASAN: use-after-free in io_sendrecv_fail+0x3b0/0x3e0 io_uring/net.c:1221 Write of size 8 at addr ffff8880771b4080 by task syz-executor.3/30199 CPU: 1 PID: 30199 Comm: syz-executor.3 Not tainted 6.0.0-rc6-next-20220923-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x15e/0x45d mm/kasan/report.c:395 kasan_report+0xbb/0x1f0 mm/kasan/report.c:495 io_sendrecv_fail+0x3b0/0x3e0 io_uring/net.c:1221 io_req_complete_failed+0x155/0x1b0 io_uring/io_uring.c:873 io_drain_req io_uring/io_uring.c:1648 [inline] io_queue_sqe_fallback.cold+0x29f/0x788 io_uring/io_uring.c:1931 io_submit_sqe io_uring/io_uring.c:2160 [inline] io_submit_sqes+0x1180/0x1df0 io_uring/io_uring.c:2276 __do_sys_io_uring_enter+0xac6/0x2410 io_uring/io_uring.c:3216 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: c4c0009e ("io_uring/net: combine fail handlers") Reported-by: syzbot+4c597a574a3f5a251bda@syzkaller.appspotmail.com Signed-off-by:
-
Pavel Begunkov authored
It's not currently possible but in the future we may get IORING_CQE_F_MORE and so a notification even for a failed request, i.e. when cqe->res <= 0. That's precisely what the documentation says, so adjust the test and do IORING_CQE_F_MORE checks regardless of the main completion cqe->res. Signed-off-by:
-
- 22 Sep, 2022 1 commit
-
-
Jens Axboe authored
io_uring will run task_work from contexts that have been prepared for waiting, and in doing so it'll implicitly set the task running again to avoid issues with blocking conditions. The new deferred local task_work doesn't do that, which can result in spews on this being an invalid condition: [ 112.917576] do not call blocking ops when !TASK_RUNNING; state=1 set at [<00000000ad64af64>] prepare_to_wait_exclusive+0x3f/0xd0 [ 112.983088] WARNING: CPU: 1 PID: 190 at kernel/sched/core.c:9819 __might_sleep+0x5a/0x60 [ 112.987240] Modules linked in: [ 112.990504] CPU: 1 PID: 190 Comm: io_uring Not tainted 6.0.0-rc6+ #1617 [ 113.053136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 113.133650] RIP: 0010:__might_sleep+0x5a/0x60 [ 113.136507] Code: ee 48 89 df 5b 31 d2 5d e9 33 ff ff ff 48 8b 90 30 0b 00 00 48 c7 c7 90 de 45 82 c6 05 20 8b 79 01 01 48 89 d1 e8 3a 49 77 00 <0f> 0b eb d1 66 90 0f 1f 44 00 00 9c 58 f6 c4 02 74 35 65 8b 05 ed [ 113.223940] RSP: 0018:ffffc90000537ca0 EFLAGS: 00010286 [ 113.232903] RAX: 0000000000000000 RBX: ffffffff8246782c RCX: ffffffff8270bcc8 IOPS=133.15K, BW=520MiB/s, IOS/call=32/31 [ 113.353457] RDX: ffffc90000537b50 RSI: 00000000ffffdfff RDI: 0000000000000001 [ 113.358970] RBP: 00000000000003bc R08: 0000000000000000 R09: c0000000ffffdfff [ 113.361746] R10: 0000000000000001 R11: ffffc90000537b48 R12: ffff888103f97280 [ 113.424038] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000001 [ 113.428009] FS: 00007f67ae7fc700(0000) GS:ffff88842fc80000(0000) knlGS:0000000000000000 [ 113.432794] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 113.503186] CR2: 00007f67b8b9b3b0 CR3: 0000000102b9b005 CR4: 0000000000770ee0 [ 113.507291] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 113.512669] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 113.574374] PKRU: 55555554 [ 113.576800] Call Trace: [ 113.578325] <TASK> [ 113.579799] set_page_dirty_lock+0x1b/0x90 [ 113.582411] __bio_release_pages+0x141/0x160 [ 113.673078] ? set_next_entity+0xd7/0x190 [ 113.675632] blk_rq_unmap_user+0xaa/0x210 [ 113.678398] ? timerqueue_del+0x2a/0x40 [ 113.679578] nvme_uring_task_cb+0x94/0xb0 [ 113.683025] __io_run_local_work+0x8a/0x150 [ 113.743724] ? io_cqring_wait+0x33d/0x500 [ 113.746091] io_run_local_work.part.76+0x2e/0x60 [ 113.750091] io_cqring_wait+0x2e7/0x500 [ 113.752395] ? trace_event_raw_event_io_uring_req_failed+0x180/0x180 [ 113.823533] __x64_sys_io_uring_enter+0x131/0x3c0 [ 113.827382] ? switch_fpu_return+0x49/0xc0 [ 113.830753] do_syscall_64+0x34/0x80 [ 113.832620] entry_SYSCALL_64_after_hwframe+0x5e/0xc8 Ensure that we mark current as TASK_RUNNING for deferred task_work as well. Fixes: c0e0d6ba ("io_uring: add IORING_SETUP_DEFER_TASKRUN") Reported-by:
Stefan Roesch <shr@fb.com> Reviewed-by:
-
- 21 Sep, 2022 33 commits
-
-
Pavel Begunkov authored
Add a zerocopy version of sendmsg. Signed-off-by:
-
Pavel Begunkov authored
Merge io_send_zc_fail() into io_sendrecv_fail(), saves a few lines of code and some headache for following patch. Signed-off-by:
-
Pavel Begunkov authored
Simple renaming of io_sendzc*() functions in preparatio to adding a zerocopy sendmsg variant. Signed-off-by:
-
Pavel Begunkov authored
We have normal sends, but what is missing is sendto-like requests. Add sendto() capabilities to IORING_OP_SEND by passing in addr just as we do for IORING_OP_SEND_ZC. Signed-off-by:
-
Pavel Begunkov authored
Instead of passing the right address into io_setup_async_addr() only specify local on-stack storage and let the function infer where to grab it from. It optimises out one local variable we have to deal with. Signed-off-by:
-
Pavel Begunkov authored
Partial zc send may end up in io_req_complete_failed(), which not only would return invalid result but also mask out the notification leading to lifetime issues. Cc: stable@vger.kernel.org Signed-off-by:
-
Pavel Begunkov authored
Just as with rw, partial send/recv may end up in io_req_complete_failed() and loose the result, make sure we return the number of bytes processed. Cc: stable@vger.kernel.org Signed-off-by:
-
Pavel Begunkov authored
A partially done read/write may end up in io_req_complete_failed() and loose the result, make sure we return the number of bytes processed. Cc: stable@vger.kernel.org Signed-off-by:
-
Pavel Begunkov authored
Sometimes we have to do a little bit of a fixup on a request failuer in io_req_complete_failed(). Add a callback in opdef for that. Cc: stable@vger.kernel.org Signed-off-by:
-
Jens Axboe authored
If we have doubly sized SQEs, then we need to shift the sq index by 1 to account for using two entries for a single request. The CQE dumping gets this right, but the SQE one does not. Improve the SQE dumping in general, the information dumped is pretty sparse and doesn't even cover the whole basic part of the SQE. Include information on the extended part of the SQE, if doubly sized SQEs are in use. A typical dump now looks like the following: [...] SQEs: 32 32: opcode:URING_CMD, fd:0, flags:1, off:3225964160, addr:0x0, rw_flags:0x0, buf_index:0 user_data:2721, e0:0x0, e1:0xffffb8041000, e2:0x100000000000, e3:0x5500, e4:0x7, e5:0x0, e6:0x0, e7:0x0 33: opcode:URING_CMD, fd:0, flags:1, off:3225964160, addr:0x0, rw_flags:0x0, buf_index:0 user_data:2722, e0:0x0, e1:0xffffb8043000, e2:0x100000000000, e3:0x5508, e4:0x7, e5:0x0, e6:0x0, e7:0x0 34: opcode:URING_CMD, fd:0, flags:1, off:3225964160, addr:0x0, rw_flags:0x0, buf_index:0 user_data:2723, e0:0x0, e1:0xffffb8045000, e2:0x100000000000, e3:0x5510, e4:0x7, e5:0x0, e6:0x0, e7:0x0 [...] Fixes: ebdeb7c0 ("io_uring: add support for 128-byte SQEs") Signed-off-by:
-
Jens Axboe authored
We already have the cq_shift, just use that to tell if we have doubly sized CQEs or not. While in there, cleanup the CQE32 vs normal CQE size printing. Signed-off-by: -
Pavel Begunkov authored
We removed conditional io_commit_cqring_flush() guarding against spurious eventfd and the io_disarm_next()'s return value is not used anymore, just void it. Signed-off-by:
-
Pavel Begunkov authored
We'll grab uring_lock and call __io_run_local_work() with several atomics inside even if there are no task works. Skip it if ->work_llist is empty. Signed-off-by:
-
Pavel Begunkov authored
Let's keep checks for whether to break the iopoll loop or not same for normal and defer tw, this includes ->cached_cq_tail checks guarding against polling more than asked for. Signed-off-by:
-
Pavel Begunkov authored
We may propagate a positive return value of io_run_task_work() out of io_iopoll_check(), which breaks our tests. io_run_task_work() doesn't return anything useful for us, ignore the return value. Fixes: c0e0d6ba ("io_uring: add IORING_SETUP_DEFER_TASKRUN") Signed-off-by:
-
Pavel Begunkov authored
We try to restrict CQ waiters when IORING_SETUP_DEFER_TASKRUN is set, but if nothing has been submitted yet it'll allow any waiter, which violates the contract. Fixes: c0e0d6ba ("io_uring: add IORING_SETUP_DEFER_TASKRUN") Signed-off-by:
-
Pavel Begunkov authored
In case of DEFER_TASK_WORK we try to restrict waiters to only one task, which is also the only submitter; however, we don't do it reliably, which might be very confusing and backfire in the future. E.g. we currently allow multiple tasks in io_iopoll_check(). Fixes: c0e0d6ba ("io_uring: add IORING_SETUP_DEFER_TASKRUN") Signed-off-by:
-
Pavel Begunkov authored
Reuse struct io_sr_msg for zerocopy sends, which is handy. There is only one zerocopy specific field, namely .notif, and we have enough space for it. Signed-off-by:
-
Pavel Begunkov authored
In preparation for using struct io_sr_msg for zerocopy sends, clean up types. First, flags can be u16 as it's provided by the userspace in u16 ioprio, as well as addr_len. This saves us 4 bytes. Also use unsigned for size and done_io, both are as well limited to u32. Signed-off-by:
-
Pavel Begunkov authored
Add a sg_from_iter() for when we initiate non-bvec zerocopy sends, which helps us to remove some extra steps from io_sg_from_iter(). The only thing the new function has to do before giving control away to __zerocopy_sg_from_iter() is to check if the skb has managed frags and downgrade them if so. Signed-off-by:
-
Pavel Begunkov authored
We already keep io_async_msghdr caches for normal send/recv requests, use them also for zerocopy send. Signed-off-by:
-
Pavel Begunkov authored
send/recv have async_data caches but there are only used from within issue handlers. Extend their use also to ->prep_async, should be handy with links and IOSQE_ASYNC. Signed-off-by:
-
Pavel Begunkov authored
We should prioritise send/recv retry cases over failures, they're more important. Shuffle -ERESTARTSYS after we handled retries. Signed-off-by:
-
Pavel Begunkov authored
There is one place when we forgot to change hand coded spin locking with io_cq_lock(), change it to be more consistent. Note, the unlock part is already __io_cq_unlock_post(). Signed-off-by:
-
Pavel Begunkov authored
Request referencing has changed a while ago and there is no notion left of submission/completion references, kill an outdated comment. Signed-off-by:
-
Dylan Yudaken authored
In commit 934447a6 ("io_uring: do not recycle buffer in READV") a temporary fix was put in io_kbuf_recycle to simply never recycle READV buffers. Instead of that, rather treat READV with REQ_F_BUFFER_SELECTED the same as a READ with REQ_F_BUFFER_SELECTED. Since READV requires iov_len of 1 they are essentially the same. In order to do this inside io_prep_rw() add some validation to check that it is in fact only length 1, and also extract the length of the buffer at prep time. This allows removal of the io_iov_buffer_select codepaths as they are only used from the READV op. Signed-off-by:
-
Jens Axboe authored
We need the poll_flags to know how to poll for the IO, and we should have the batch structure in preparation for supporting batched completions with iopoll. Signed-off-by: -
Jens Axboe authored
Combine the two checks we have for task_work running and whether or not we need to shuffle the mutex into one, so we unify how task_work is run in the iopoll loop. This helps ensure that local task_work is run when needed, and also optimizes that path to avoid a mutex shuffle if it's not needed. Signed-off-by: -
Jens Axboe authored
We have a few spots that drop the mutex just to run local task_work, which immediately tries to grab it again. Add a helper that just passes in whether we're locked already. Signed-off-by: -
Jens Axboe authored
After the addition of iopoll support for passthrough, there's a bit of a mixup here. Clean it up and get rid of the casting for the passthrough command type. Signed-off-by: -
Kanchan Joshi authored
Store a cookie during submission, and use that to implement completion-polling inside the ->uring_cmd_iopoll handler. This handler makes use of existing bio poll facility. Signed-off-by:
Kanchan Joshi <joshi.k@samsung.com> Signed-off-by:
Anuj Gupta <anuj20.g@samsung.com> Link: https://lore.kernel.org/r/20220823161443.49436-5-joshi.k@samsung.comSigned-off-by:
-
Kanchan Joshi authored
This is in preparation to support iopoll for nvme passthrough. Signed-off-by:
-
Kanchan Joshi authored
Put this up in the same way as iopoll is done for regular read/write IO. Make place for storing a cookie into struct io_uring_cmd on submission. Perform the completion using the ->uring_cmd_iopoll handler. Signed-off-by:
Pankaj Raghav <p.raghav@samsung.com> Link: https://lore.kernel.org/r/20220823161443.49436-3-joshi.k@samsung.comSigned-off-by:
-
