- 08 May, 2017 40 commits
-
-
Fabio Estevam authored
commit 06f9eb88 upstream. Building arm64.allmodconfig leads to the following warning: usb/gadget/function/f_ncm.c:203:0: warning: "NCAPS" redefined #define NCAPS (USB_CDC_NCM_NCAP_ETH_FILTER | USB_CDC_NCM_NCAP_CRC_MODE) ^ In file included from /home/build/work/batch/arch/arm64/include/asm/io.h:32:0, from /home/build/work/batch/include/linux/clocksource.h:19, from /home/build/work/batch/include/clocksource/arm_arch_timer.h:19, from /home/build/work/batch/arch/arm64/include/asm/arch_timer.h:27, from /home/build/work/batch/arch/arm64/include/asm/timex.h:19, from /home/build/work/batch/include/linux/timex.h:65, from /home/build/work/batch/include/linux/sched.h:19, from /home/build/work/batch/arch/arm64/include/asm/compat.h:25, from /home/build/work/batch/arch/arm64/include/asm/stat.h:23, from /home/build/work/batch/include/linux/stat.h:5, from /home/build/work/batch/include/linux/module.h:10, from /home/build/work/batch/drivers/usb/gadget/function/f_ncm.c:19: arch/arm64/include/asm/cpufeature.h:27:0: note: this is the location of the previous definition #define NCAPS 2 So add a ARM64 prefix to avoid such problem. Reported-by:
Olof's autobuilder <build@lixom.net> Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
This shuts up a warning in the 3.18-stable series that has been fixed in newer kernels with commit 498a92d4 ("ARM: cns3xxx: pci: avoid potential stack overflow"): arch/arm/mach-cns3xxx/pcie.c: In function 'cns3xxx_pcie_hw_init': arch/arm/mach-cns3xxx/pcie.c:313:1: error: the frame size of 1080 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] The fix that went into v4.4 is known to be buggy and was later fixed again with commit 88e9da9a ("CNS3xxx: Fix PCI cns3xxx_write_config()"). While we could backport both to 3.18, they are fairly invasive and the warning is definitely harmless here as the call chain is known to not overflow the stack of the init task. This simply adds a Makefile flag to extend the limit for this one file. Signed-off-by:
-
Kirill A. Shutemov authored
commit 6b7339f4 upstream. Reading page fault handler code I've noticed that under right circumstances kernel would map anonymous pages into file mappings: if the VMA doesn't have vm_ops->fault() and the VMA wasn't fully populated on ->mmap(), kernel would handle page fault to not populated pte with do_anonymous_page(). Let's change page fault handler to use do_anonymous_page() only on anonymous VMA (->vm_ops == NULL) and make sure that the VMA is not shared. For file mappings without vm_ops->fault() or shred VMA without vm_ops, page fault on pte_none() entry would lead to SIGBUS. Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Eric Dumazet authored
commit b98b0bc8 upstream. CAP_NET_ADMIN users should not be allowed to set negative sk_sndbuf or sk_rcvbuf values, as it can lead to various memory corruptions, crashes, OOM... Note that before commit 82981930 ("net: cleanups in sock_setsockopt()"), the bug was even more serious, since SO_SNDBUF and SO_RCVBUF were vulnerable. This needs to be backported to all known linux kernels. Again, many thanks to syzkaller team for discovering this gem. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Guillaume Nault authored
commit 32c23116 upstream. Lock socket before checking the SOCK_ZAPPED flag in l2tp_ip6_bind(). Without lock, a concurrent call could modify the socket flags between the sock_flag(sk, SOCK_ZAPPED) test and the lock_sock() call. This way, a socket could be inserted twice in l2tp_ip6_bind_table. Releasing it would then leave a stale pointer there, generating use-after-free errors when walking through the list or modifying adjacent entries. BUG: KASAN: use-after-free in l2tp_ip6_close+0x22e/0x290 at addr ffff8800081b0ed8 Write of size 8 by task syz-executor/10987 CPU: 0 PID: 10987 Comm: syz-executor Not tainted 4.8.0+ #39 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 ffff880031d97838 ffffffff829f835b ffff88001b5a1640 ffff8800081b0ec0 ffff8800081b15a0 ffff8800081b6d20 ffff880031d97860 ffffffff8174d3cc ffff880031d978f0 ffff8800081b0e80 ffff88001b5a1640 ffff880031d978e0 Call Trace: [<ffffffff829f835b>] dump_stack+0xb3/0x118 lib/dump_stack.c:15 [<ffffffff8174d3cc>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:156 [< inline >] print_address_description mm/kasan/report.c:194 [<ffffffff8174d666>] kasan_report_error+0x1f6/0x4d0 mm/kasan/report.c:283 [< inline >] kasan_report mm/kasan/report.c:303 [<ffffffff8174db7e>] __asan_report_store8_noabort+0x3e/0x40 mm/kasan/report.c:329 [< inline >] __write_once_size ./include/linux/compiler.h:249 [< inline >] __hlist_del ./include/linux/list.h:622 [< inline >] hlist_del_init ./include/linux/list.h:637 [<ffffffff8579047e>] l2tp_ip6_close+0x22e/0x290 net/l2tp/l2tp_ip6.c:239 [<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415 [<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422 [<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570 [<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017 [<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208 [<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244 [<ffffffff813774f9>] task_work_run+0xf9/0x170 [<ffffffff81324aae>] do_exit+0x85e/0x2a00 [<ffffffff81326dc8>] do_group_exit+0x108/0x330 [<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307 [<ffffffff811b49af>] do_signal+0x7f/0x18f0 [<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156 [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259 [<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6 Object at ffff8800081b0ec0, in cache L2TP/IPv6 size: 1448 Allocated: PID = 10987 [ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20 [ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0 [ 1116.897025] [<ffffffff8174c9ad>] kasan_kmalloc+0xad/0xe0 [ 1116.897025] [<ffffffff8174cee2>] kasan_slab_alloc+0x12/0x20 [ 1116.897025] [< inline >] slab_post_alloc_hook mm/slab.h:417 [ 1116.897025] [< inline >] slab_alloc_node mm/slub.c:2708 [ 1116.897025] [< inline >] slab_alloc mm/slub.c:2716 [ 1116.897025] [<ffffffff817476a8>] kmem_cache_alloc+0xc8/0x2b0 mm/slub.c:2721 [ 1116.897025] [<ffffffff84c4f6a9>] sk_prot_alloc+0x69/0x2b0 net/core/sock.c:1326 [ 1116.897025] [<ffffffff84c58ac8>] sk_alloc+0x38/0xae0 net/core/sock.c:1388 [ 1116.897025] [<ffffffff851ddf67>] inet6_create+0x2d7/0x1000 net/ipv6/af_inet6.c:182 [ 1116.897025] [<ffffffff84c4af7b>] __sock_create+0x37b/0x640 net/socket.c:1153 [ 1116.897025] [< inline >] sock_create net/socket.c:1193 [ 1116.897025] [< inline >] SYSC_socket net/socket.c:1223 [ 1116.897025] [<ffffffff84c4b46f>] SyS_socket+0xef/0x1b0 net/socket.c:1203 [ 1116.897025] [<ffffffff85e4d685>] entry_SYSCALL_64_fastpath+0x23/0xc6 Freed: PID = 10987 [ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20 [ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0 [ 1116.897025] [<ffffffff8174cf61>] kasan_slab_free+0x71/0xb0 [ 1116.897025] [< inline >] slab_free_hook mm/slub.c:1352 [ 1116.897025] [< inline >] slab_free_freelist_hook mm/slub.c:1374 [ 1116.897025] [< inline >] slab_free mm/slub.c:2951 [ 1116.897025] [<ffffffff81748b28>] kmem_cache_free+0xc8/0x330 mm/slub.c:2973 [ 1116.897025] [< inline >] sk_prot_free net/core/sock.c:1369 [ 1116.897025] [<ffffffff84c541eb>] __sk_destruct+0x32b/0x4f0 net/core/sock.c:1444 [ 1116.897025] [<ffffffff84c5aca4>] sk_destruct+0x44/0x80 net/core/sock.c:1452 [ 1116.897025] [<ffffffff84c5ad33>] __sk_free+0x53/0x220 net/core/sock.c:1460 [ 1116.897025] [<ffffffff84c5af23>] sk_free+0x23/0x30 net/core/sock.c:1471 [ 1116.897025] [<ffffffff84c5cb6c>] sk_common_release+0x28c/0x3e0 ./include/net/sock.h:1589 [ 1116.897025] [<ffffffff8579044e>] l2tp_ip6_close+0x1fe/0x290 net/l2tp/l2tp_ip6.c:243 [ 1116.897025] [<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415 [ 1116.897025] [<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422 [ 1116.897025] [<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570 [ 1116.897025] [<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017 [ 1116.897025] [<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208 [ 1116.897025] [<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244 [ 1116.897025] [<ffffffff813774f9>] task_work_run+0xf9/0x170 [ 1116.897025] [<ffffffff81324aae>] do_exit+0x85e/0x2a00 [ 1116.897025] [<ffffffff81326dc8>] do_group_exit+0x108/0x330 [ 1116.897025] [<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307 [ 1116.897025] [<ffffffff811b49af>] do_signal+0x7f/0x18f0 [ 1116.897025] [<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156 [ 1116.897025] [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [ 1116.897025] [<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259 [ 1116.897025] [<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6 Memory state around the buggy address: ffff8800081b0d80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8800081b0e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8800081b0e80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ^ ffff8800081b0f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8800081b0f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== The same issue exists with l2tp_ip_bind() and l2tp_ip_bind_table. Fixes: c51ce497 ("l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC case") Reported-by:
Baozeng Ding <sploving1@gmail.com> Reported-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Jan Kara authored
commit 07393101 upstream. When file permissions are modified via chmod(2) and the user is not in the owning group or capable of CAP_FSETID, the setgid bit is cleared in inode_change_ok(). Setting a POSIX ACL via setxattr(2) sets the file permissions as well as the new ACL, but doesn't clear the setgid bit in a similar way; this allows to bypass the check in chmod(2). Fix that. References: CVE-2016-7097 Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
commit c3c87e77 upstream. The fix from 9fc81d87 ("perf: Fix events installation during moving group") was incomplete in that it failed to recognise that creating a group with events for different CPUs is semantically broken -- they cannot be co-scheduled. Furthermore, it leads to real breakage where, when we create an event for CPU Y and then migrate it to form a group on CPU X, the code gets confused where the counter is programmed -- triggered in practice as well by me via the perf fuzzer. Fix this by tightening the rules for creating groups. Only allow grouping of counters that can be co-scheduled in the same context. This means for the same task and/or the same cpu. Fixes: 9fc81d87 ("perf: Fix events installation during moving group") Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20150123125834.090683288@infradead.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Seung-Woo Kim authored
commit 60a2362f upstream. After freeing pin from regulator_ena_gpio_free, loop can access the pin. So this patch fixes not to access pin after freeing. Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 3aa02cb6 upstream. Currently kill_fasync() is called outside the stream lock in snd_pcm_period_elapsed(). This is potentially racy, since the stream may get released even during the irq handler is running. Although snd_pcm_release_substream() calls snd_pcm_drop(), this doesn't guarantee that the irq handler finishes, thus the kill_fasync() call outside the stream spin lock may be invoked after the substream is detached, as recently reported by KASAN. As a quick workaround, move kill_fasync() call inside the stream lock. The fasync is rarely used interface, so this shouldn't have a big impact from the performance POV. Ideally, we should implement some sync mechanism for the proper finish of stream and irq handler. But this oneliner should suffice for most cases, so far. Reported-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Sachin Prabhu authored
commit 38bd4906 upstream. A signal can interrupt a SendReceive call which result in incoming responses to the call being ignored. This is a problem for calls such as open which results in the successful response being ignored. This results in an open file resource on the server. The patch looks into responses which were cancelled after being sent and in case of successful open closes the open fids. For this patch, the check is only done in SendReceive2() RH-bz: 1403319 Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Acked-by:
-
Thomas Gleixner authored
commit 1e38da30 upstream. The handling of the might_cancel queueing is not properly protected, so parallel operations on the file descriptor can race with each other and lead to list corruptions or use after free. Protect the context for these operations with a seperate lock. The wait queue lock cannot be reused for this because that would create a lock inversion scenario vs. the cancel lock. Replacing might_cancel with an atomic (atomic_t or atomic bit) does not help either because it still can race vs. the actual list operation. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: "linux-fsdevel@vger.kernel.org" Cc: syzkaller <syzkaller@googlegroups.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1701311521430.3457@nanosSigned-off-by:
-
Arnd Bergmann authored
commit e434e041 upstream. The tg3_set_eeprom() function correctly initializes the 'start' variable, but gcc generates a false warning: drivers/net/ethernet/broadcom/tg3.c: In function 'tg3_set_eeprom': drivers/net/ethernet/broadcom/tg3.c:12057:4: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized] I have not come up with a way to restructure the code in a way that avoids the warning without making it less readable, so this adds an initialization for the declaration to shut up that warning. Signed-off-by:
-
Arnd Bergmann authored
commit 0335695d upstream. The current_user_ns() macro currently returns &init_user_ns when user namespaces are disabled, and that causes several warnings when building with gcc-6.0 in code that compares the result of the macro to &init_user_ns itself: fs/xfs/xfs_ioctl.c: In function 'xfs_ioctl_setattr_check_projid': fs/xfs/xfs_ioctl.c:1249:22: error: self-comparison always evaluates to true [-Werror=tautological-compare] if (current_user_ns() == &init_user_ns) This is a legitimate warning in principle, but here it isn't really helpful, so I'm reprasing the definition in a way that shuts up the warning. Apparently gcc only warns when comparing identical literals, but it can figure out that the result of an inline function can be identical to a constant expression in order to optimize a condition yet not warn about the fact that the condition is known at compile time. This is exactly what we want here, and it looks reasonable because we generally prefer inline functions over macros anyway. Signed-off-by:
Serge Hallyn <serge.hallyn@canonical.com> Cc: David Howells <dhowells@redhat.com> Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com> Cc: James Morris <james.l.morris@oracle.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Arnd Bergmann authored
commit b268c34e upstream. The awacs sound driver produces a false-positive warning in ppc64_defconfig: sound/ppc/awacs.c: In function 'snd_pmac_awacs_init': include/sound/control.h:219:9: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] I haven't come up with a good way to rewrite the code to avoid the warning, so here is a bad one: I initialize the variable before the conditionall initialization so gcc no longer has to worry about it. Signed-off-by:
-
Arnd Bergmann authored
commit abc596b9 upstream. The xilinx PCIe driver prints a register value whose type is propagated to the type returned by the GENMASK() macro. Unfortunately, that type has recently changed as the result of a bug fix, so now we get a warning about the type: drivers/pci/host/pcie-xilinx.c: In function 'xilinx_pcie_clear_err_interrupts': drivers/pci/host/pcie-xilinx.c:154:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'long unsigned int' [-Wformat=] Change the code so we always print the number as an 'unsigned long' type to avoid the warning. The original code was fine on 32-bit architectures but not on 64-bit. Now it works as expected on both. Fixes: 00b4d9a1 ("bitops: Fix shift overflow in GENMASK macros") Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by:
-
Arnd Bergmann authored
commit 065bd8c2 upstream. The mlx5 driver passes a string pointer in through a 'u64' variable, which on 32-bit machines causes a build warning: drivers/net/ethernet/mellanox/mlx5/core/debugfs.c: In function 'qp_read_field': drivers/net/ethernet/mellanox/mlx5/core/debugfs.c:303:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] The code is in fact safe, so we can shut up the warning by adding extra type casts. Signed-off-by:
-
Arnd Bergmann authored
commit fddcca51 upstream. When map_word gets too large, we use a lot of kernel stack, and for MTD_MAP_BANK_WIDTH_32, this means we use more than the recommended 1024 bytes in a number of functions: drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_write_buffers': drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1336 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_erase_varsize': drivers/mtd/chips/cfi_cmdset_0020.c:972:1: warning: the frame size of 1208 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/mtd/chips/cfi_cmdset_0001.c: In function 'do_write_buffer': drivers/mtd/chips/cfi_cmdset_0001.c:1835:1: warning: the frame size of 1240 bytes is larger than 1024 bytes [-Wframe-larger-than=] This can be avoided if all operations on the map word are done indirectly and the stack gets reused between the calls. We can mostly achieve this by selecting MTD_COMPLEX_MAPPINGS whenever MTD_MAP_BANK_WIDTH_32 is set, but for the case that no other bank width is enabled, we also need to use a non-constant map_bankwidth() to convince the compiler to use less stack. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Sagi Grimberg authored
commit 49df2781 upstream. Use uintptr_t to handle wr_id casting, which was found by Kbuild test robot and smatch. Also remove an internal definition of variable which potentially shadows an external one (and make sparse happy). Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Lars Ellenberg authored
commit 2630628b upstream. Apparently we now implicitly get definitions for BITS_PER_PAGE and BITS_PER_PAGE_MASK from the pid_namespace.h Instead of renaming our defines, I chose to define only if not yet defined, but to double check the value if already defined. Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Khem Raj authored
commit 1e407ee3 upstream. gcc-6 correctly warns about a out of bounds access arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds] offsetof(struct thread_fp_state, fpr[32][0])); ^ check the end of array instead of beginning of next element to fix this Signed-off-by:
Khem Raj <raj.khem@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Segher Boessenkool <segher@kernel.crashing.org> Tested-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by:
Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Josh Poimboeuf authored
commit 34a477e5 upstream. On x86-32, with CONFIG_FIRMWARE and multiple CPUs, if you enable function graph tracing and then suspend to RAM, it will triple fault and reboot when it resumes. The first fault happens when booting a secondary CPU: startup_32_smp() load_ucode_ap() prepare_ftrace_return() ftrace_graph_is_dead() (accesses 'kill_ftrace_graph') The early head_32.S code calls into load_ucode_ap(), which has an an ftrace hook, so it calls prepare_ftrace_return(), which calls ftrace_graph_is_dead(), which tries to access the global 'kill_ftrace_graph' variable with a virtual address, causing a fault because the CPU is still in real mode. The fix is to add a check in prepare_ftrace_return() to make sure it's running in protected mode before continuing. The check makes sure the stack pointer is a virtual kernel address. It's a bit of a hack, but it's not very intrusive and it works well enough. For reference, here are a few other (more difficult) ways this could have potentially been fixed: - Move startup_32_smp()'s call to load_ucode_ap() down to *after* paging is enabled. (No idea what that would break.) - Track down load_ucode_ap()'s entire callee tree and mark all the functions 'notrace'. (Probably not realistic.) - Pause graph tracing in ftrace_suspend_notifier_call() or bringup_cpu() or __cpu_up(), and ensure that the pause facility can be queried from real mode. Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Tested-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net> Cc: linux-acpi@vger.kernel.org Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/5c1272269a580660703ed2eccf44308e790c7a98.1492123841.git.jpoimboe@redhat.comSigned-off-by:
-
J. Bruce Fields authored
commit e6838a29 upstream. A client can append random data to the end of an NFSv2 or NFSv3 RPC call without our complaining; we'll just stop parsing at the end of the expected data and ignore the rest. Encoded arguments and replies are stored together in an array of pages, and if a call is too large it could leave inadequate space for the reply. This is normally OK because NFS RPC's typically have either short arguments and long replies (like READ) or long arguments and short replies (like WRITE). But a client that sends an incorrectly long reply can violate those assumptions. This was observed to cause crashes. Also, several operations increment rq_next_page in the decode routine before checking the argument size, which can leave rq_next_page pointing well past the end of the page array, causing trouble later in svc_free_pages. So, following a suggestion from Neil Brown, add a central check to enforce our expectation that no NFSv2/v3 call has both a large call and a large reply. As followup we may also want to rewrite the encoding routines to check more carefully that they aren't running off the end of the page array. We may also consider rejecting calls that have any extra garbage appended. That would be safer, and within our rights by spec, but given the age of our server and the NFS protocol, and the fact that we've never enforced this before, we may need to balance that against the possibility of breaking some oddball client. Reported-by:
Tuomas Haanpää <thaan@synopsys.com> Reported-by:
Ari Kauppi <ari@synopsys.com> Reviewed-by:
NeilBrown <neilb@suse.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 7c5bb4ac upstream. Clevo P650RS and other similar devices require i8042 to be reset in order to detect Synaptics touchpad. Reported-by:
Paweł Bylica <chfast@gmail.com> Tested-by:
Ed Bordin <edbordin@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=190301Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Al Viro authored
commit 71d6ad08 upstream. Don't assume that server is sane and won't return more data than asked for. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
James Hogan authored
commit 162b270c upstream. KGDB is a kernel debug stub and it can't be used to debug userland as it can only safely access kernel memory. On MIPS however KGDB has always got the register state of sleeping processes from the userland register context at the beginning of the kernel stack. This is meaningless for kernel threads (which never enter userland), and for user threads it prevents the user seeing what it is doing while in the kernel: (gdb) info threads Id Target Id Frame ... 3 Thread 2 (kthreadd) 0x0000000000000000 in ?? () 2 Thread 1 (init) 0x000000007705c4b4 in ?? () 1 Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201 Get the register state instead from the (partial) kernel register context stored in the task's thread_struct for resume() to restore. All threads now correctly appear to be in context_switch(): (gdb) info threads Id Target Id Frame ... 3 Thread 2 (kthreadd) context_switch (rq=<optimized out>, cookie=..., next=<optimized out>, prev=0x0) at kernel/sched/core.c:2903 2 Thread 1 (init) context_switch (rq=<optimized out>, cookie=..., next=<optimized out>, prev=0x0) at kernel/sched/core.c:2903 1 Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201 Call clobbered registers which aren't saved and exception registers (BadVAddr & Cause) which can't be easily determined without stack unwinding are reported as 0. The PC is taken from the return address, such that the state presented matches that found immediately after returning from resume(). Fixes: 88547001 ("[MIPS] kgdb: add arch support for the kernel's kgdb core") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15829/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Takashi Iwai authored
commit 4e7655fd upstream. The snd_use_lock_sync() (thus its implementation snd_use_lock_sync_helper()) has the 5 seconds timeout to break out of the sync loop. It was introduced from the beginning, just to be "safer", in terms of avoiding the stupid bugs. However, as Ben Hutchings suggested, this timeout rather introduces a potential leak or use-after-free that was apparently fixed by the commit 2d7d5400 ("ALSA: seq: Fix race during FIFO resize"): for example, snd_seq_fifo_event_in() -> snd_seq_event_dup() -> copy_from_user() could block for a long time, and snd_use_lock_sync() goes timeout and still leaves the cell at releasing the pool. For fixing such a problem, we remove the break by the timeout while still keeping the warning. Suggested-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 723b929c ] Andrey Konovalov reported a BUG caused by the ip6mr code which is caused because we call unregister_netdevice_many for a device that is already being destroyed. In IPv4's ipmr that has been resolved by two commits long time ago by introducing the "notify" parameter to the delete function and avoiding the unregister when called from a notifier, so let's do the same for ip6mr. The trace from Andrey: ------------[ cut here ]------------ kernel BUG at net/core/dev.c:6813! invalid opcode: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 1165 Comm: kworker/u4:3 Not tainted 4.11.0-rc7+ #251 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: netns cleanup_net task: ffff880069208000 task.stack: ffff8800692d8000 RIP: 0010:rollback_registered_many+0x348/0xeb0 net/core/dev.c:6813 RSP: 0018:ffff8800692de7f0 EFLAGS: 00010297 RAX: ffff880069208000 RBX: 0000000000000002 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88006af90569 RBP: ffff8800692de9f0 R08: ffff8800692dec60 R09: 0000000000000000 R10: 0000000000000006 R11: 0000000000000000 R12: ffff88006af90070 R13: ffff8800692debf0 R14: dffffc0000000000 R15: ffff88006af90000 FS: 0000000000000000(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe7e897d870 CR3: 00000000657e7000 CR4: 00000000000006e0 Call Trace: unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many+0xc8/0x120 net/core/dev.c:7880 ip6mr_device_event+0x362/0x3f0 net/ipv6/ip6mr.c:1346 notifier_call_chain+0x145/0x2f0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1647 call_netdevice_notifiers net/core/dev.c:1663 rollback_registered_many+0x919/0xeb0 net/core/dev.c:6841 unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many net/core/dev.c:7880 default_device_exit_batch+0x4fa/0x640 net/core/dev.c:8333 ops_exit_list.isra.4+0x100/0x150 net/core/net_namespace.c:144 cleanup_net+0x5a8/0xb40 net/core/net_namespace.c:463 process_one_work+0xc04/0x1c10 kernel/workqueue.c:2097 worker_thread+0x223/0x19c0 kernel/workqueue.c:2231 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 Code: 3c 32 00 0f 85 70 0b 00 00 48 b8 00 02 00 00 00 00 ad de 49 89 47 78 e9 93 fe ff ff 49 8d 57 70 49 8d 5f 78 eb 9e e8 88 7a 14 fe <0f> 0b 48 8b 9d 28 fe ff ff e8 7a 7a 14 fe 48 b8 00 00 00 00 00 RIP: rollback_registered_many+0x348/0xeb0 RSP: ffff8800692de7f0 ---[ end trace e0b29c57e9b3292c ]--- Reported-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by:
-
Tushar Dave authored
[ Upstream commit c70b17b7 ] Reducing real_num_tx_queues needs to be in sync with skb queue_mapping otherwise skbs with queue_mapping greater than real_num_tx_queues can be sent to the underlying driver and can result in kernel panic. One such event is running netconsole and enabling VF on the same device. Or running netconsole and changing number of tx queues via ethtool on same device. e.g. Unable to handle kernel NULL pointer dereference tsk->{mm,active_mm}->context = 0000000000001525 tsk->{mm,active_mm}->pgd = fff800130ff9a000 \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ kworker/48:1(475): Oops [#1] CPU: 48 PID: 475 Comm: kworker/48:1 Tainted: G OE 4.11.0-rc3-davem-net+ #7 Workqueue: events queue_process task: fff80013113299c0 task.stack: fff800131132c000 TSTATE: 0000004480e01600 TPC: 00000000103f9e3c TNPC: 00000000103f9e40 Y: 00000000 Tainted: G OE TPC: <ixgbe_xmit_frame_ring+0x7c/0x6c0 [ixgbe]> g0: 0000000000000000 g1: 0000000000003fff g2: 0000000000000000 g3: 0000000000000001 g4: fff80013113299c0 g5: fff8001fa6808000 g6: fff800131132c000 g7: 00000000000000c0 o0: fff8001fa760c460 o1: fff8001311329a50 o2: fff8001fa7607504 o3: 0000000000000003 o4: fff8001f96e63a40 o5: fff8001311d77ec0 sp: fff800131132f0e1 ret_pc: 000000000049ed94 RPC: <set_next_entity+0x34/0xb80> l0: 0000000000000000 l1: 0000000000000800 l2: 0000000000000000 l3: 0000000000000000 l4: 000b2aa30e34b10d l5: 0000000000000000 l6: 0000000000000000 l7: fff8001fa7605028 i0: fff80013111a8a00 i1: fff80013155a0780 i2: 0000000000000000 i3: 0000000000000000 i4: 0000000000000000 i5: 0000000000100000 i6: fff800131132f1a1 i7: 00000000103fa4b0 I7: <ixgbe_xmit_frame+0x30/0xa0 [ixgbe]> Call Trace: [00000000103fa4b0] ixgbe_xmit_frame+0x30/0xa0 [ixgbe] [0000000000998c74] netpoll_start_xmit+0xf4/0x200 [0000000000998e10] queue_process+0x90/0x160 [0000000000485fa8] process_one_work+0x188/0x480 [0000000000486410] worker_thread+0x170/0x4c0 [000000000048c6b8] kthread+0xd8/0x120 [0000000000406064] ret_from_fork+0x1c/0x2c [0000000000000000] (null) Disabling lock debugging due to kernel taint Caller[00000000103fa4b0]: ixgbe_xmit_frame+0x30/0xa0 [ixgbe] Caller[0000000000998c74]: netpoll_start_xmit+0xf4/0x200 Caller[0000000000998e10]: queue_process+0x90/0x160 Caller[0000000000485fa8]: process_one_work+0x188/0x480 Caller[0000000000486410]: worker_thread+0x170/0x4c0 Caller[000000000048c6b8]: kthread+0xd8/0x120 Caller[0000000000406064]: ret_from_fork+0x1c/0x2c Caller[0000000000000000]: (null) Signed-off-by:
Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 34b2789f ] Now sctp doesn't check sock's state before listening on it. It could even cause changing a sock with any state to become a listening sock when doing sctp_listen. This patch is to fix it by checking sock's state in sctp_listen, so that it will listen on the sock with right state. Reported-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Andrey Konovalov authored
[ Upstream commit bcc5364b ] When calculating po->tp_hdrlen + po->tp_reserve the result can overflow. Fix by checking that tp_reserve <= INT_MAX on assign. Signed-off-by:
-
Andrey Konovalov authored
[ Upstream commit 8f8d28e4 ] When calculating rb->frames_per_block * req->tp_block_nr the result can overflow. Add a check that tp_block_size * tp_block_nr <= UINT_MAX. Since frames_per_block <= tp_block_size, the expression would never overflow. Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit e91793bb ] The Rx path may grab the socket right before pppol2tp_release(), but nothing guarantees that it will enqueue packets before skb_queue_purge(). Therefore, the socket can be destroyed without its queues fully purged. Fix this by purging queues in pppol2tp_session_destruct() where we're guaranteed nothing is still referencing the socket. Fixes: 9e9cb622 ("l2tp: fix userspace reception on plain L2TP sockets") Signed-off-by:
-
Nathan Sullivan authored
[ Upstream commit 49d52e81 ] If the PHY is halted on stop, then do not set the state to PHY_UP. This ensures the phy will be restarted later in phy_start when the machine is started again. Fixes: 00db8189 ("This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details.") Signed-off-by:
Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by:
Brad Mouring <brad.mouring@ni.com> Acked-by:
Xander Huff <xander.huff@ni.com> Acked-by:
Kyle Roeschley <kyle.roeschley@ni.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 48481c8f ] Dmitry posted a nice reproducer of a bug triggering in neigh_probe() when dereferencing a NULL neigh->ops->solicit method. This can happen for arp_direct_ops/ndisc_direct_ops and similar, which can be used for NUD_NOARP neighbours (created when dev->header_ops is NULL). Admin can then force changing nud_state to some other state that would fire neigh timer. Signed-off-by:
-
Tom Hromatka authored
[ Upstream commit 9ae34dbd ] This commit moves sparc64's prototype of pmd_write() outside of the CONFIG_TRANSPARENT_HUGEPAGE ifdef. In 2013, commit a7b9403f ("sparc64: Encode huge PMDs using PTE encoding.") exposed a path where pmd_write() could be called without CONFIG_TRANSPARENT_HUGEPAGE defined. This can result in the panic below. The diff is awkward to read, but the changes are straightforward. pmd_write() was moved outside of #ifdef CONFIG_TRANSPARENT_HUGEPAGE. Also, __HAVE_ARCH_PMD_WRITE was defined. kernel BUG at include/asm-generic/pgtable.h:576! \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ oracle_8114_cdb(8114): Kernel bad sw trap 5 [#1] CPU: 120 PID: 8114 Comm: oracle_8114_cdb Not tainted 4.1.12-61.7.1.el6uek.rc1.sparc64 #1 task: fff8400700a24d60 ti: fff8400700bc4000 task.ti: fff8400700bc4000 TSTATE: 0000004411e01607 TPC: 00000000004609f8 TNPC: 00000000004609fc Y: 00000005 Not tainted TPC: <gup_huge_pmd+0x198/0x1e0> g0: 000000000001c000 g1: 0000000000ef3954 g2: 0000000000000000 g3: 0000000000000001 g4: fff8400700a24d60 g5: fff8001fa5c10000 g6: fff8400700bc4000 g7: 0000000000000720 o0: 0000000000bc5058 o1: 0000000000000240 o2: 0000000000006000 o3: 0000000000001c00 o4: 0000000000000000 o5: 0000048000080000 sp: fff8400700bc6ab1 ret_pc: 00000000004609f0 RPC: <gup_huge_pmd+0x190/0x1e0> l0: fff8400700bc74fc l1: 0000000000020000 l2: 0000000000002000 l3: 0000000000000000 l4: fff8001f93250950 l5: 000000000113f800 l6: 0000000000000004 l7: 0000000000000000 i0: fff8400700ca46a0 i1: bd0000085e800453 i2: 000000026a0c4000 i3: 000000026a0c6000 i4: 0000000000000001 i5: fff800070c958de8 i6: fff8400700bc6b61 i7: 0000000000460dd0 I7: <gup_pud_range+0x170/0x1a0> Call Trace: [0000000000460dd0] gup_pud_range+0x170/0x1a0 [0000000000460e84] get_user_pages_fast+0x84/0x120 [00000000006f5a18] iov_iter_get_pages+0x98/0x240 [00000000005fa744] do_direct_IO+0xf64/0x1e00 [00000000005fbbc0] __blockdev_direct_IO+0x360/0x15a0 [00000000101f74fc] ext4_ind_direct_IO+0xdc/0x400 [ext4] [00000000101af690] ext4_ext_direct_IO+0x1d0/0x2c0 [ext4] [00000000101af86c] ext4_direct_IO+0xec/0x220 [ext4] [0000000000553bd4] generic_file_read_iter+0x114/0x140 [00000000005bdc2c] __vfs_read+0xac/0x100 [00000000005bf254] vfs_read+0x54/0x100 [00000000005bf368] SyS_pread64+0x68/0x80 Signed-off-by:
Tom Hromatka <tom.hromatka@oracle.com> Signed-off-by:
-
bob picco authored
[ Upstream commit adfae8a5 ] I encountered this bug when using /proc/kcore to examine the kernel. Plus a coworker inquired about debugging tools. We computed pa but did not use it during the maximum physical address bits test. Instead we used the identity mapped virtual address which will always fail this test. I believe the defect came in here: [bpicco@zareason linus.git]$ git describe --contains bb4e6e85 v3.18-rc1~87^2~4 . Signed-off-by:
Bob Picco <bob.picco@oracle.com> Signed-off-by:
-
Stefano Stabellini authored
commit c06b6d70 upstream. On slow platforms with unreliable TSC, such as QEMU emulated machines, it is possible for the kernel to request the next event in the past. In that case, in the current implementation of xen_vcpuop_clockevent, we simply return -ETIME. To be precise the Xen returns -ETIME and we pass it on. However the result of this is a missed event, which simply causes the kernel to hang. Instead it is better to always ask the hypervisor for a timer event, even if the timeout is in the past. That way there are no lost interrupts and the kernel survives. To do that, remove the VCPU_SSHOTTMR_future flag. Signed-off-by:
Stefano Stabellini <sstabellini@kernel.org> Acked-by:
Juergen Gross <jgross@suse.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Felipe F. Tonello authored
commit 03d27ade upstream. buflen by default (256) is smaller than wMaxPacketSize (512) in high-speed devices. That caused the OUT endpoint to freeze if the host send any data packet of length greater than 256 bytes. This is an example dump of what happended on that enpoint: HOST: [DATA][Length=260][...] DEVICE: [NAK] HOST: [PING] DEVICE: [NAK] HOST: [PING] DEVICE: [NAK] ... HOST: [PING] DEVICE: [NAK] This patch fixes this problem by setting the minimum usb_request's buffer size for the OUT endpoint as its wMaxPacketSize. Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Felipe F. Tonello <eu@felipetonello.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
santosh.shilimkar@oracle.com authored
commit e47db94e upstream. Two different threads with different rds sockets may be in rds_recv_rcvbuf_delta() via receive path. If their ports both map to the same word in the congestion map, then using non-atomic ops to update it could cause the map to be incorrect. Lets use atomics to avoid such an issue. Full credit to Wengang <wen.gang.wang@oracle.com> for finding the issue, analysing it and also pointing out to offending code with spin lock based fix. Reviewed-by:
Leon Romanovsky <leon@leon.nu> Signed-off-by:
Wengang Wang <wen.gang.wang@oracle.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Corey Minyard authored
commit c80e1b62 upstream. As part of handling a crash on an SMP system, an IPI is send to all other CPUs to save their current registers and stop. It was using task_pt_regs(current) to get the registers, but that will only be accurate if the CPU was interrupted running in userland. Instead allow the architecture to pass in the registers (all pass NULL now, but allow for the future) and then use get_irq_regs() which should be accurate as we are in an interrupt. Fall back to task_pt_regs(current) if nothing else is available. Signed-off-by:
Corey Minyard <cminyard@mvista.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13050/Signed-off-by:
-
