The rps_resp buffer in ata_device is a DMA target, but it isn't
explicitly cacheline aligned. Due to this, adjacent fields can be
overwritten with stale data from memory on non-coherent architectures.
As a result, the kernel is sometimes unable to communicate with an SATA
device behind a SAS expander.

Fix this by ensuring that the rps_resp buffer is cacheline aligned.

This issue is similar to that fixed by Commit 84bda12a ("libata:
align ap->sector_buf") and Commit 4ee34ea3 ("libata: Align
ata_device's id on a cacheline").

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

In non-coherent DMA mode, kernel uses cache flushing operations to
maintain I/O coherency, so scsi's block queue should be aligned to the
value returned by dma_get_cache_alignment().  Otherwise, If a DMA buffer
and a kernel structure share a same cache line, and if the kernel
structure has dirty data, cache_invalidate (no writeback) will cause
data corruption.

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhc@lemote.com>
[hch: rebased and updated the comment and changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Provide the dummy version of dma_get_cache_alignment that always returns
1 even if CONFIG_HAS_DMA is not set, so that drivers and subsystems can
use it without ifdefs.

Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

_vreg_ is being dereferenced before it is null checked, hence there is a
potential null pointer dereference.

Fix this by moving the pointer dereference after _vreg_ has been null
checked.

This issue was detected with the help of Coccinelle.

Fixes: aa497613 ("ufs: Add regulator enable support")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

As part of the scsi EH path, aacraid performs a reinitialization of the
adapter, which encompass freeing resources and IRQs, NULLifying lots of
pointers, and then initialize it all over again.  We've identified a
problem during the free IRQ portion of this path if CONFIG_DEBUG_SHIRQ
is enabled on kernel config file.

Happens that, in case this flag was set, right after free_irq()
effectively clears the interrupt, it checks if it was requested as
IRQF_SHARED. In positive case, it performs another call to the IRQ
handler on driver. Problem is: since aacraid currently free some
resources *before* freeing the IRQ, once free_irq() path calls the
handler again (due to CONFIG_DEBUG_SHIRQ), aacraid crashes due to NULL
pointer dereference with the following trace:

  aac_src_intr_message+0xf8/0x740 [aacraid]
  __free_irq+0x33c/0x4a0
  free_irq+0x78/0xb0
  aac_free_irq+0x13c/0x150 [aacraid]
  aac_reset_adapter+0x2e8/0x970 [aacraid]
  aac_eh_reset+0x3a8/0x5d0 [aacraid]
  scsi_try_host_reset+0x74/0x180
  scsi_eh_ready_devs+0xc70/0x1510
  scsi_error_handler+0x624/0xa20

This patch prevents the crash by changing the order of the
deinitialization in this path of aacraid: first we clear the IRQ, then
we free other resources. No functional change intended.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Currently the driver accepts two ways of requesting an initialization
reset on the adapter: by passing aac_reset_devices module parameter,
or the generic kernel parameter reset_devices.

It's working as intended...but if we end up reaching a scsi hang and
the scsi EH mechanism takes place, aacraid performs resets as part of
the scsi error recovery procedure. These EH routines might reinitialize
the device, and if we have provided some of the reset parameters in the
kernel command-line, we again perform an "initialization" reset.

So, to avoid this duplication of resets in case of scsi EH path, this
patch adds a field to aac_dev struct to keep per-adapter track of the
init reset request - once it's done, we set it to false and don't
proactively reset anymore in case of reinitializations.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Commit 16ae9dd3 ("scsi: aacraid: Fix for excessive prints on EEH")
introduced checks about the state of device before any PCI operations in
the driver. Basically, this prevents it to perform PCI accesses when
device is in the process of recover from a PCI error. In PowerPC, such
mechanism is called EEH, and the aforementioned commit introduced checks
that are based on EEH-specific primitives for that.

The potential problems with this approach are three: first, these checks
are "locked" to powerpc only - another archs could have error recovery
methods too, like AER in Intel. Also, the powerpc primitives perform
expensive FW accesses to validate the precise PCI state of a device.
Finally, code becomes more complicated and needs ifdef validation based
on arch config being set.

So, this patch makes use of generic PCI state checks, which are
lightweight and non-dependent of arch configs - also, it makes the code
cleaner.

Fixes: 16ae9dd3 ("scsi: aacraid: Fix for excessive prints on EEH")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

As per recommendation from Linus we should be using a distinct type for
blacklist flags.

[mkp: was cut against an older kernel, applied by hand]
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

If a cleanup task is not responded to while we are in bnx2fc_abts_cleanup, it
will hang the SCSI error handler since we use wait_for_completion instead of
wait_for_completion_timeout.  So, use wait_for_completion_timeout so that we
don't hang the SCSI error handler thread forever.

Fixes the call trace:

[183373.131468] INFO: task scsi_eh_16:110146 blocked for more than 120 seconds.
[183373.131469] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[183373.131470] scsi_eh_16      D ffff88103f2fca14     0 110146      2 0x00000080
[183373.131472]  ffff880855e77cb0 0000000000000046 ffff881050654e70 ffff880855e77fd8
[183373.131474]  ffff880855e77fd8 ffff880855e77fd8 ffff881050654e70 ffff88103f2fcb48
[183373.131475]  ffff88103f2fcb50 7fffffffffffffff ffff881050654e70 ffff88103f2fca14
[183373.131477] Call Trace:
[183373.131479]  [<ffffffff8168b579>] schedule+0x29/0x70
[183373.131481]  [<ffffffff81688fc9>] schedule_timeout+0x239/0x2d0
[183373.131486]  [<ffffffff8142821e>] ? __dev_printk+0x3e/0x90
[183373.131487]  [<ffffffff814282cd>] ? dev_printk+0x5d/0x80
[183373.131490]  [<ffffffff8168b956>] wait_for_completion+0x116/0x170
[183373.131492]  [<ffffffff810c4ec0>] ? wake_up_state+0x20/0x20
[183373.131494]  [<ffffffffa048c234>] bnx2fc_abts_cleanup+0x3d/0x62 [bnx2fc]
[183373.131497]  [<ffffffffa0483a80>] bnx2fc_eh_abort+0x470/0x580 [bnx2fc]
[183373.131500]  [<ffffffff814570af>] scsi_error_handler+0x59f/0x8b0
[183373.131501]  [<ffffffff81456b10>] ? scsi_eh_get_sense+0x250/0x250
[183373.131503]  [<ffffffff810b052f>] kthread+0xcf/0xe0
[183373.131505]  [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140
[183373.131507]  [<ffffffff81696418>] ret_from_fork+0x58/0x90
[183373.131509]  [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull IPMI updates from Corey Minyard:
 "This is a fairly large rework of the IPMI code, along with a bunch of
  smaller fixes. The major changes have been in the next tree for a
  couple of months, so they should be good to do in.

   - Some users had IPMI systems where the GUID of the IPMI controller
     could change. So rescanning of the GUID was added. The naming of
     some sysfs things was dependent on the GUID, however, so this
     resulted in the sysfs interface code in IPMI changing to remove
     that dependency and name the IPMI BMCs like other sysfs devices.

   - The ipmi_si_intf.c code was fairly bloated with all the different
     discovery methods (PCI, ACPI, SMBIOS, OF, platform, module
     parameters, hot add). The structure of how the interfaces were
     added was redone to make them more modular, then the individual
     methods were pulled out into their own files"

* tag 'ipmi-for-4.15' of git://github.com/cminyard/linux-ipmi: (48 commits)
  ipmi_si: Delete an error message for a failed memory allocation in try_smi_init()
  ipmi_si: fix memory leak on new_smi
  ipmi: remove redundant initialization of bmc
  ipmi: pr_err() strings should end with newlines
  ipmi: Clean up some print operations
  ipmi: Make the DMI probe into a generic platform probe
  ipmi: Make the IPMI proc interface configurable
  ipmi_ssif: Add device attrs for the things in proc
  ipmi_si: Add device attrs for the things in proc
  ipmi_si: remove ipmi_smi_alloc() function
  ipmi_si: Move port and mem I/O handling to their own files
  ipmi_si: Get rid of unused spacing and port fields
  ipmi_si: Move PARISC handling to another file
  ipmi_si: Move PCI setup to another file
  ipmi_si: Move platform device handling to another file
  ipmi_si: Move hardcode handling to a separate file.
  ipmi_si: Move the hotmod handling to another file.
  ipmi_si: Change ipmi_si_add_smi() to take just I/O info
  ipmi_si: Move io setup into io structure
  ipmi_si: Move irq setup handling into the io struct
  ...

Pull PCI updates from Bjorn Helgaas:

  - detach driver before tearing down procfs/sysfs (Alex Williamson)

  - disable PCIe services during shutdown (Sinan Kaya)

  - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel)

  - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas)

  - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas)

  - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn
    Helgaas)

  - report non-fatal AER errors only to the affected endpoint (Gabriele
    Paoloni)

  - distribute bus numbers, MMIO, and I/O space among hotplug bridges to
    allow more devices to be hot-added (Mika Westerberg)

  - fix pciehp races during initialization and surprise link down (Mika
    Westerberg)

  - handle surprise-removed devices in PME handling (Qiang)

  - support resizable BARs for large graphics devices (Christian König)

  - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo
    Sironi)

  - create SR-IOV virtfn/physfn sysfs links before attaching driver
    (Stuart Hayes)

  - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen)

  - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy)

  - avoid slot reset if bridge itself is broken (Jan Glauber)

  - clean up pci_reset_function() path (Jan H. Schönherr)

  - make pci_map_rom() fail if the option ROM is invalid (Changbin Du)

  - convert timers to timer_setup() (Kees Cook)

  - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap)

  - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal)

  - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master()
    declarations (Bjorn Helgaas)

  - fix endpoint framework overflows and BUG()s (Dan Carpenter)

  - fix endpoint framework issues (Kishon Vijay Abraham I)

  - avoid broken Cavium CN8xxx bus reset behavior (David Daney)

  - extend Cavium ACS capability quirks (Vadim Lomovtsev)

  - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel)

  - turn off dra7xx clocks cleanly on shutdown (Keerthy)

  - fix Faraday probe error path (Wei Yongjun)

  - support HiSilicon STB SoC PCIe host controller (Jianguo Sun)

  - fix Hyper-V interrupt affinity issue (Dexuan Cui)

  - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly
    Kuznetsov)

  - support multiple MSI on iProc (Sandor Bodo-Merle)

  - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou
    Zhiqiang)

  - fix Layerscape default error response (Minghuan Lian)

  - support MSI on Tango host controller (Marc Gonzalez)

  - support Tegra186 PCIe host controller (Manikanta Maddireddy)

  - use generic accessors on Tegra when possible (Thierry Reding)

  - support V3 Semiconductor PCI host controller (Linus Walleij)

* tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits)
  PCI/ASPM: Add L1 Substates definitions
  PCI/ASPM: Reformat ASPM register definitions
  PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD
  PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time
  PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe()
  PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up()
  PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up()
  PCI: Fix kernel-doc build warning
  PCI: Fail pci_map_rom() if the option ROM is invalid
  PCI: Move pci_map_rom() error path
  PCI: Move PCI_QUIRKS to the PCI bus menu
  alpha/PCI: Make pdev_save_srm_config() static
  PCI: Remove unused declarations
  PCI: Remove redundant pci_dev, pci_bus, resource declarations
  PCI: Remove redundant pcibios_set_master() declarations
  PCI/PME: Handle invalid data when reading Root Status
  PCI: hv: Use effective affinity mask
  PCI: pciehp: Do not clear Presence Detect Changed during initialization
  PCI: pciehp: Fix race condition handling surprise link down
  PCI: Distribute available resources to hotplug-capable bridges
  ...

Pull rdma updates from Doug Ledford:
 "This is a fairly plain pull request. Lots of driver updates across the
  stack, a huge number of static analysis cleanups including a close to
  50 patch series from Bart Van Assche, and a number of new features
  inside the stack such as general CQ moderation support.

  Nothing really stands out, but there might be a few conflicts as you
  take things in. In particular, the cleanups touched some of the same
  lines as the new timer_setup changes.

  Everything in this pull request has been through 0day and at least two
  days of linux-next (since Stephen doesn't necessarily flag new
  errors/warnings until day2). A few more items (about 30 patches) from
  Intel and Mellanox showed up on the list on Tuesday. I've excluded
  those from this pull request, and I'm sure some of them qualify as
  fixes suitable to send any time, but I still have to review them
  fully. If they contain mostly fixes and little or no new development,
  then I will probably send them through by the end of the week just to
  get them out of the way.

  There was a break in my acceptance of patches which coincides with the
  computer problems I had, and then when I got things mostly back under
  control I had a backlog of patches to process, which I did mostly last
  Friday and Monday. So there is a larger number of patches processed in
  that timeframe than I was striving for.

  Summary:
   - Add iWARP support to qedr driver
   - Lots of misc fixes across subsystem
   - Multiple update series to hns roce driver
   - Multiple update series to hfi1 driver
   - Updates to vnic driver
   - Add kref to wait struct in cxgb4 driver
   - Updates to i40iw driver
   - Mellanox shared pull request
   - timer_setup changes
   - massive cleanup series from Bart Van Assche
   - Two series of SRP/SRPT changes from Bart Van Assche
   - Core updates from Mellanox
   - i40iw updates
   - IPoIB updates
   - mlx5 updates
   - mlx4 updates
   - hns updates
   - bnxt_re fixes
   - PCI write padding support
   - Sparse/Smatch/warning cleanups/fixes
   - CQ moderation support
   - SRQ support in vmw_pvrdma"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (296 commits)
  RDMA/core: Rename kernel modify_cq to better describe its usage
  IB/mlx5: Add CQ moderation capability to query_device
  IB/mlx4: Add CQ moderation capability to query_device
  IB/uverbs: Add CQ moderation capability to query_device
  IB/mlx5: Exposing modify CQ callback to uverbs layer
  IB/mlx4: Exposing modify CQ callback to uverbs layer
  IB/uverbs: Allow CQ moderation with modify CQ
  iw_cxgb4: atomically flush the qp
  iw_cxgb4: only call the cq comp_handler when the cq is armed
  iw_cxgb4: Fix possible circular dependency locking warning
  RDMA/bnxt_re: report vlan_id and sl in qp1 recv completion
  IB/core: Only maintain real QPs in the security lists
  IB/ocrdma_hw: remove unnecessary code in ocrdma_mbx_dealloc_lkey
  RDMA/core: Make function rdma_copy_addr return void
  RDMA/vmw_pvrdma: Add shared receive queue support
  RDMA/core: avoid uninitialized variable warning in create_udata
  RDMA/bnxt_re: synchronize poll_cq and req_notify_cq verbs
  RDMA/bnxt_re: Flush CQ notification Work Queue before destroying QP
  RDMA/bnxt_re: Set QP state in case of response completion errors
  RDMA/bnxt_re: Add memory barriers when processing CQ/EQ entries
  ...

Pull cgroup updates from Tejun Heo:
 "Cgroup2 cpu controller support is finally merged.

   - Basic cpu statistics support to allow monitoring by default without
     the CPU controller enabled.

   - cgroup2 cpu controller support.

   - /sys/kernel/cgroup files to help dealing with new / optional
     features"

* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: export list of cgroups v2 features using sysfs
  cgroup: export list of delegatable control files using sysfs
  cgroup: mark @cgrp __maybe_unused in cpu_stat_show()
  MAINTAINERS: relocate cpuset.c
  cgroup, sched: Move basic cpu stats from cgroup.stat to cpu.stat
  sched: Implement interface for cgroup unified hierarchy
  sched: Misc preps for cgroup unified hierarchy interface
  sched/cputime: Add dummy cputime_adjust() implementation for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
  cgroup: statically initialize init_css_set->dfl_cgrp
  cgroup: Implement cgroup2 basic CPU usage accounting
  cpuacct: Introduce cgroup_account_cputime[_field]()
  sched/cputime: Expose cputime_adjust()

Pull percpu update from Tejun Heo:
 "Another minor pull request. It only contains one commit which can
  reclaim a bit of memory wasted during boot on UP"

* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: don't forget to free the temporary struct pcpu_alloc_info

Pull workqueue updates from Tejun Heo:
 "There was a commit to make unbound kworkers respect cpu isolation but
  it conflicted with the restructuring of cpu isolation and got
  reverted, so the only thing left is the trivial comment fix.

  Will retry the cpu isolation change after this merge window"

* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Fix comment for unbound workqueue's attrbutes
  Revert "workqueue: respect isolated cpus when queueing an unbound work"
  workqueue: respect isolated cpus when queueing an unbound work

Pull libata updates from Tejun Heo:
 "Nothing too interesting or alarming. Other than a new power saving
  mode addition to ahci and crash fix on a tracepoint, all changes are
  trivial or device-specific"

* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits)
  ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequency mode.
  ata: sata_dwc_460ex: Propagate platform device ID to DMA driver
  ata: fixes kernel crash while tracing ata_eh_link_autopsy event
  ata: pata_pdc2027x: Fix space before '[' error.
  libata: fix spelling mistake: 'ambigious' -> 'ambiguous'
  ata: ceva: Add SMMU support for SATA IP
  ata: ceva: Correct the suspend and resume logic for SATA
  ata: ceva: Correct the AXI bus configuration for SATA ports
  ata: ceva: Add CCI support for SATA if CCI is enabled
  ata: ceva: Make RxWaterMark value as module parameter
  ata: ceva: Disable Device Sleep capability
  ata: ceva: Add gen 3 mode support in driver
  ata: ceva: Move sata port phy oob settings to device-tree
  devicetree: bindings: Add sata port phy config parameters in ahci-ceva
  ata: mark expected switch fall-throughs
  ata: sata_mv: remove a redundant assignment to pointer ehi
  ahci: Add support for Cavium's fifth generation SATA controller
  ata: sata_rcar: Use of_device_get_match_data() helper
  libata: make ata_port_type const
  libata: make static arrays const, reduces object code size
  ...

Pull module updates from Jessica Yu:
 "Summary of modules changes for the 4.15 merge window:

   - treewide module_param_call() cleanup, fix up set/get function
     prototype mismatches, from Kees Cook

   - minor code cleanups"

* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: Do not paper over type mismatches in module_param_call()
  treewide: Fix function prototypes for module_param_call()
  module: Prepare to convert all module_param_call() prototypes
  kernel/module: Delete an error message for a failed memory allocation in add_module_usage()

Pull mailbox updates from Jassi Brar:
 "Change to POLL api and fixes for FlexRM and OMAP driver.

  Summary:

   - Core: Prefer ACK method over POLL, if both supported

   - Test: use flag instead of special character

   - FlexRM: Usual driver internal minor churn

   - Omap: fix error path"

* tag 'mailbox-v4.15' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox/omap: unregister mbox class
  mailbox: mailbox-test: don't rely on rx_buffer content to signal data ready
  mailbox: reset txdone_method TXDONE_BY_POLL if client knows_txdone
  mailbox: Build Broadcom FlexRM driver as loadable module for iProc SOCs
  mailbox: bcm-flexrm-mailbox: Use common GPL comment header
  mailbox: bcm-flexrm-mailbox: add depends on ARCH_BCM_IPROC
  mailbox: bcm-flexrm-mailbox: Print ring number in errors and warnings
  mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush sequence

Pull power supply and reset updates from Sebastian Reichel:

 - misc minor fixes

* tag 'for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: cpcap-charger: fix incorrect return value check
  power: supply: replace pr_* with dev_*
  power: supply: pcf50633-charger: remove redundant variable charging_start
  power: supply: generic-adc-battery: remove redundant variable pdata
  power: supply: max8997: Improve a size determination in probe

Pull HSI updates from Sebastian Reichel:

 - add HSI OMAP4 bindings

 - misc small fixes

* tag 'hsi-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  dt-bindings: hsi: add omap4 hsi controller bindings
  HSI: hsi_char: pr_err() strings should end with newlines
  HSI: omap_ssi_core: fix kilo to be "k" not "K"

Pull SELinux updates from Paul Moore:
 "Seven SELinux patches for v4.15, although five of the seven are small
  build fixes and cleanups.

  Of the remaining two patches, the only one worth really calling out is
  Eric's fix for the SELinux filesystem xattr set/remove code; the other
  patch simply converts the SELinux hash table implementation to use
  kmem_cache.

  Eric's setxattr/removexattr tweak converts SELinux back to calling the
  commoncap implementations when the xattr is not SELinux related. The
  immediate win is to fixup filesystem capabilities in user namespaces,
  but it makes things a bit saner overall; more information in the
  commit description"

* tag 'selinux-pr-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: remove extraneous initialization of slots_used and max_chain_len
  selinux: remove redundant assignment to len
  selinux: remove redundant assignment to str
  selinux: fix build warning
  selinux: fix build warning by removing the unused sid variable
  selinux: Perform both commoncap and selinux xattr checks
  selinux: Use kmem_cache for hashtab_node

Pull audit updates from Paul Moore:
 "Another relatively small pull request for audit, nine patches total.

  The only real new bit of functionality is the patch from Richard which
  adds the ability to filter records based on the filesystem type.

  The remainder are bug fixes and cleanups; the bug fix highlights
  include:

   - ensuring that we properly audit init/PID-1 (me)

   - allowing the audit daemon to shutdown the kernel/auditd connection
     cleanly by setting the audit PID to zero (Steve)"

* tag 'audit-pr-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: filter PATH records keyed on filesystem magic
  Audit: remove unused audit_log_secctx function
  audit: Allow auditd to set pid to 0 to end auditing
  audit: Add new syscalls to the perm=w filter
  audit: use audit_set_enabled() in audit_enable()
  audit: convert audit_ever_enabled to a boolean
  audit: don't use simple_strtol() anymore
  audit: initialize the audit subsystem as early as possible
  audit: ensure that 'audit=1' actually enables audit for PID 1

This matters at least for the mincore syscall, which will otherwise copy
uninitialized memory from the page allocator to userspace.  It is
probably also a correctness error for /proc/$pid/pagemap, but I haven't
tested that.

Removing the `walk->hugetlb_entry` condition in walk_hugetlb_range() has
no effect because the caller already checks for that.

This only reports holes in hugetlb ranges to callers who have specified
a hugetlb_entry callback.

This issue was found using an AFL-based fuzzer.

v2:
 - don't crash on ->pte_hole==NULL (Andrew Morton)
 - add Cc stable (Andrew Morton)

Fixes: 1e25a271 ("mincore: apply page table walker on do_mincore()")
Signed-off-by: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking updates from David Miller:
 "Highlights:

   1) Maintain the TCP retransmit queue using an rbtree, with 1GB
      windows at 100Gb this really has become necessary. From Eric
      Dumazet.

   2) Multi-program support for cgroup+bpf, from Alexei Starovoitov.

   3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew
      Lunn.

   4) Add meter action support to openvswitch, from Andy Zhou.

   5) Add a data meta pointer for BPF accessible packets, from Daniel
      Borkmann.

   6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet.

   7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli.

   8) More work to move the RTNL mutex down, from Florian Westphal.

   9) Add 'bpftool' utility, to help with bpf program introspection.
      From Jakub Kicinski.

  10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper
      Dangaard Brouer.

  11) Support 'blocks' of transformations in the packet scheduler which
      can span multiple network devices, from Jiri Pirko.

  12) TC flower offload support in cxgb4, from Kumar Sanghvi.

  13) Priority based stream scheduler for SCTP, from Marcelo Ricardo
      Leitner.

  14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg.

  15) Add RED qdisc offloadability, and use it in mlxsw driver. From
      Nogah Frankel.

  16) eBPF based device controller for cgroup v2, from Roman Gushchin.

  17) Add some fundamental tracepoints for TCP, from Song Liu.

  18) Remove garbage collection from ipv6 route layer, this is a
      significant accomplishment. From Wei Wang.

  19) Add multicast route offload support to mlxsw, from Yotam Gigi"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits)
  tcp: highest_sack fix
  geneve: fix fill_info when link down
  bpf: fix lockdep splat
  net: cdc_ncm: GetNtbFormat endian fix
  openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start
  netem: remove unnecessary 64 bit modulus
  netem: use 64 bit divide by rate
  tcp: Namespace-ify sysctl_tcp_default_congestion_control
  net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()
  ipv6: set all.accept_dad to 0 by default
  uapi: fix linux/tls.h userspace compilation error
  usbnet: ipheth: prevent TX queue timeouts when device not ready
  vhost_net: conditionally enable tx polling
  uapi: fix linux/rxrpc.h userspace compilation errors
  net: stmmac: fix LPI transitioning for dwmac4
  atm: horizon: Fix irq release error
  net-sysfs: trigger netlink notification on ifalias change via sysfs
  openvswitch: Using kfree_rcu() to simplify the code
  openvswitch: Make local function ovs_nsh_key_attr_size() static
  openvswitch: Fix return value check in ovs_meter_cmd_features()
  ...

Pull MIPS updates from James Hogan:
 "These are the main MIPS changes for 4.15.

  Fixes:
   - ralink: Fix MT7620 PCI build issues (4.5)
   - Disable cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN for 32-bit SMP
     (4.1)
   - Fix MIPS64 FP save/restore on 32-bit kernels (4.0)
   - ptrace: Pick up ptrace/seccomp changed syscall numbers (3.19)
   - ralink: Fix MT7628 pinmux (3.19)
   - BCM47XX: Fix LED inversion on WRT54GSv1 (3.17)
   - Fix n32 core dumping as o32 since regset support (3.13)
   - ralink: Drop obsolete USB_ARCH_HAS_HCD select

  Build system:
   - Default to "generic" (multiplatform) system type instead of IP22
   - Use generic little endian MIPS32 r2 configuration as default
     defconfig instead of ip22_defconfig

  FPU emulation:
   - Fix exception generation for certain R6 FPU instructions

  SMP:
   - Allow __cpu_number_map to be larger than NR_CPUS for sparse CPU id
     spaces

  Miscellaneous:
   - Add iomem resource for kernel bss section for kexec/kdump
   - Atomics: Nudge writes on bit unlock
   - DT files: Standardise "ok" -> "okay"

  Minor cleanups:
   - Define virt_to_pfn()
   - Make thread_saved_pc static
   - Simplify 32-bit sign extension in __read_64bit_c0_split()
   - DMA: Use vma_pages() helper
   - FPU emulation: Replace unsigned with unsigned int
   - MM: Removed unused lastpfn
   - Alchemy: Make clk_ops const
   - Lasat: Use setup_timer() helper
   - ralink: Use BIT() in MT7620 PCI driver

  Platform support:

  BMIPS:
  - Enable HARDIRQS_SW_RESEND

  Broadcom BCM63XX:
  - Add clkdev lookup support
  - Update clk driver, UART driver, DTs to handle named refclk from DTs
  - Split apart various clocks to more closely match hardware
  - Add ethernet clocks

  Cavium Octeon:
  - Remove usage of cvmx_wait() in favour of __delay()

  ImgTec Pistachio:
  - DT: Drop deprecated dwmmc num-slots property

  Ingenic JZ4780:
  - Add NFS root to Ci20 defconfig
  - Add watchdog to Ci20 DT & defconfig, and allow building of watchdog
    driver with this SoC

  Generic (multiplatform):
  - Migrate xilfpga (MIPSfpga) platform to the generic platform

  Lantiq xway:
  - Fix ASC0/ASC1 clocks"

* tag 'mips_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (46 commits)
  MIPS: Add iomem resource for kernel bss section.
  MIPS: cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN don't work for 32-bit SMP
  MIPS: BMIPS: Enable HARDIRQS_SW_RESEND
  MIPS: pci: Make use of the BIT() macro inside the mt7620 driver
  MIPS: pci: Remove KERN_WARN instance inside the mt7620 driver
  MIPS: pci: Remove duplicate define in mt7620 driver
  MIPS: ralink: Fix typo in mt7628 pinmux function
  MIPS: ralink: Fix MT7628 pinmux
  MIPS: Fix odd fp register warnings with MIPS64r2
  watchdog: jz4780: Allow selection of jz4740-wdt driver
  MIPS/ptrace: Update syscall nr on register changes
  MIPS/ptrace: Pick up ptrace/seccomp changed syscalls
  MIPS: Fix an n32 core file generation regset support regression
  MIPS: Fix MIPS64 FP save/restore on 32-bit kernels
  MIPS: page.h: Define virt_to_pfn()
  MIPS: Xilfpga: Switch to using generic defconfigs
  MIPS: generic: Add support for MIPSfpga
  MIPS: Set defconfig target to a generic system for 32r2el
  MIPS: Kconfig: Set default MIPS system type as generic
  MIPS: DTS: Remove num-slots from Pistachio SoC
  ...

Pull arm64 updates from Will Deacon:
 "The big highlight is support for the Scalable Vector Extension (SVE)
  which required extensive ABI work to ensure we don't break existing
  applications by blowing away their signal stack with the rather large
  new vector context (<= 2 kbit per vector register). There's further
  work to be done optimising things like exception return, but the ABI
  is solid now.

  Much of the line count comes from some new PMU drivers we have, but
  they're pretty self-contained and I suspect we'll have more of them in
  future.

  Plenty of acronym soup here:

   - initial support for the Scalable Vector Extension (SVE)

   - improved handling for SError interrupts (required to handle RAS
     events)

   - enable GCC support for 128-bit integer types

   - remove kernel text addresses from backtraces and register dumps

   - use of WFE to implement long delay()s

   - ACPI IORT updates from Lorenzo Pieralisi

   - perf PMU driver for the Statistical Profiling Extension (SPE)

   - perf PMU driver for Hisilicon's system PMUs

   - misc cleanups and non-critical fixes"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits)
  arm64: Make ARMV8_DEPRECATED depend on SYSCTL
  arm64: Implement __lshrti3 library function
  arm64: support __int128 on gcc 5+
  arm64/sve: Add documentation
  arm64/sve: Detect SVE and activate runtime support
  arm64/sve: KVM: Hide SVE from CPU features exposed to guests
  arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
  arm64/sve: KVM: Prevent guests from using SVE
  arm64/sve: Add sysctl to set the default vector length for new processes
  arm64/sve: Add prctl controls for userspace vector length management
  arm64/sve: ptrace and ELF coredump support
  arm64/sve: Preserve SVE registers around EFI runtime service calls
  arm64/sve: Preserve SVE registers around kernel-mode NEON use
  arm64/sve: Probe SVE capabilities and usable vector lengths
  arm64: cpufeature: Move sys_caps_initialised declarations
  arm64/sve: Backend logic for setting the vector length
  arm64/sve: Signal handling support
  arm64/sve: Support vector length resetting for new processes
  arm64/sve: Core task context handling
  arm64/sve: Low-level CPU setup
  ...

Merge tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux

Pull RISC-V architecture support from Palmer Dabbelt:
 "This contains the core RISC-V Linux port, which has been through nine
  rounds of review on various mailing lists. The port is not complete:
  there's some cleanup patches moving through the review process, a
  whole bunch of drivers that need some work, and a lot of feature
  additions that will be needed.

  The patches contained in this tag have been through nine rounds of
  review on the various mailing lists. I have some outstanding cleanup
  patches, but since there's been so much review on these patches I
  thought it would be best to submit them as-is and then submit explicit
  cleanup patches so everyone can review them. This first patch set is
  big enough that it's a bit of a pain to constantly rewrite, and it's
  caused a few headaches with various contributors.

  The port is definately a work in progress. While what's there builds
  and boots with 4.14, it's a bit hard to actually see anything happen
  because there are no device drivers yet. I maintain a staging branch
  that contains all the device drivers and cleanup that actually works,
  but those patches won't all be ready for a while. I'd like to get what
  we currently have into your tree so everyone can start working from a
  single base -- of particular importance is allowing the glibc
  upstreaming process to proceed so we can sort out any possibly
  lingering user-visible ABI problems we might have.

  Copied below is the ChangeLog that contains the history of this patch
  set:

   (v9) As per suggestions on our v8 patch set, I've split the core
        architecture code out from our drivers and would like to submit
        this patch set to be included into linux-next, with the goal
        being to be merged in during the next merge window. This patch
        set is based on 4.14-rc2, but if it's better to have it based on
        something else then I can change it around.

        This patch set contains just the core arch code for RISC-V, so
        while it builds an nominally boots, you can't print or take an
        interrupt so it's not that useful. If you're looking to actually
        boot a system it would probably be better to use the full patch
        set listed below.

        We've collected a handful of tags from reviewers, and the
        remainder of the patch set only got minimal feedback last time.
        Here's what changed:

         - We now use the device tree to initialize the timer driver so
           it's less tighly coupled with the arch port.

         - I cleaned up the defconfigs -- there's actually now just one,
           and it's empty. For now I think we're OK with what the kernel
           sets as defaults, but I anticipate we'll begin to expand this
           as people start to use the port more.

         - The VDSO symbols version is sane.

         - We WFI while spinning in the boot loop.

         - A handful of comments have been added.

        While there are still a handful of FIXMEs in this patch set,
        we've started to get enough interest from various users and
        contributors that maintaining an out of tree patch set is
        starting to become a big burden. Hopefully the patches are good
        enough to merge now, which will at least get everyone working in
        a more reasonable manner as we clean up the remaining issues.

   (v8) I know it may not be the ideal time to submit a patch set right
        now, as it's the middle of the merge window, but things have
        calmed down quite a bit in the last month so I thought it would
        be good to get everyone on the same page. There's been a handful
        of changes since the last patch set, but most of them are fairly
        minor:

         - We changed PAGE_OFFSET to allowing mapping more physical
           memory on 64-bit systems. This is user configurable, as it
           triggers a different code model that generates slightly less
           efficient code.

         - The device tree binding documentation is back, I'd managed to
           lose it at some point.

         - We now pass the atomic64 test suite

         - The SBI timer driver has been refactored.

   (v7) It's been a while since my last patch set, but the changes han
        been fairly minimal:

         - The PCI cleanup patches have been dropped, we'll do them as a
           separate patch set later.

         - We've the Kconfig entries from CONFIG_ISA_* to
           CONFIG_RISCV_ISA_*, to make grep easier.

         - There have been a handful of memory model related tweaks in
           I/O land, particularly relating the PCI and the upcoming
           platform specification. There are significant comments in the
           relevant files. This is still a WIP, but I think we're close
           to getting as good as we're going to get until we end up with
           some more specifications.

   (v6) As it's been only a day since the v5 patch set, the changes are
        pretty minimal:

         - The patch set is now based on linux-next/master, which I
           believe is a better base now that we're getting closer to
           upstream.

         - EARLY_PRINTK is no longer an option. Since the SBI console is
           reasonable, there's no penalty to enabling it (and thus no
           benefit to disabling it).

         - The mmap syscalls were refactored a bit.

   (v5) Things have really started to calm down, so this is fairly
        similar to the v4 patch set. The most interesting changes
        include:

         - We've moved back to a single patch set.

         - SMP support has been fixed, I was accidentally running on a
           non-SMP configuration. There were various mistakes all over
           the tree as a result of this.

         - The cmpxchg syscalls have been removed, as they were deemed a
           bad idea. As a result, RISC-V Linux systems mandate the A
           extension. The corresponding Kconfig entry to enable builds
           on non-A systems has been removed.

         - A few more atomic fixes: mostly fence changes, but those
           resulted in a handful of additional macros that were no
           longer necessary.

         - riscv_early_sie has been removed.

   (v4) There have only been a few changes since the v3 patch set:

         - The cmpxchg64 syscall is no longer enabled on 32-bit systems.
           It's not possible to provide this on SMP systems, and it's
           not necessary as glibc knows not to call it.

         - We provide a ELF_HWCAP so users can determine the ISA of the
           machine the kernel is running on.

         - The multi-line comments are in a better form.

         - There were a handful of headers that could be replaced with
           the asm-generic versions, and a few unnecessary definitions.

         - We no longer use printk, but instead use pr_*.

         - A few Kconfig and defconfig entries have been cleaned up.

   (v3) A highlight of the changes since the v2 patch set includes:

         - We've split out all our drivers into separate patch sets,
           which I've already sent out to the relevant maintainers. I
           haven't included those patches in this patch set, but some of
           them are necessary to build our port.

         - The patch set is now split up differently: rather than being
           split per directory it is split per topic. Hopefully this
           will make it easier to review the port on the mailing list.
           The split is a bit rough, so you probably still want to look
           at the patch set as a whole.

         - atomic.h has been completely rewritten and is hopefully now
           correct. I've attempted to sanitize the various other memory
           model related code as well, and I think it should all be sane
           now aside from a handful of FIXMEs commented in the code.

         - We've changed the cmpexchg syscall to always exist and to not
           be multiplexed. There is also a VDSO entry for compare and
           exchange, which allows kernels with the A extension to
           execute user code without the A extension reasonably fast.

         - Our user-visible register state now contains enough space for
           the Q extension for 128-bit floating point, as well as a few
           words to allow extensibility to future ISA extensions like
           the eventual V extension for vectors.

         - A handful of driver cleanups, but these have been split into
           separate patch sets now so I won't duplicate them here.

   (v2) A highlight of the changes since the v1 patch set includes:

         - We've split out our drivers into the right places, which
           means now there's a lot more patches. I'll be submitting
           these patches to various subsystem maintainers and including
           them in any future RISC-V patch sets until they've been
           merged.

         - The SBI console driver has been completely rewritten to use
           the HVC helpers and is now significantly smaller.

         - We've begun to use weaker barriers as opposed to just the big
           "fence". There's still some work to do here, specifically:
            - We need fences in the relaxed MMIO functions.
            - The non-relaxed MMIO functions are missing R/W bits on their fences.
            - Many AMOs need the aq and rl bits set.

         - We now have thread_info in task_struct. As a result, sscratch
           now contains TP instead of SP. This was necessary because
           thread_info is no longer on the stack.

         - A few shared routines have been added that we use instead of
           creating another arch copy"
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

* tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
  RISC-V: Build Infrastructure
  RISC-V: User-facing API
  RISC-V: Paging and MMU
  RISC-V: Device, timer, IRQs, and the SBI
  RISC-V: Task implementation
  RISC-V: ELF and module implementation
  RISC-V: Generic library routines and assembly
  RISC-V: Atomic and Locking Code
  RISC-V: Init and Halt Code
  dt-bindings: RISC-V CPU Bindings
  lib: Add shared copies of some GCC library routines
  MAINTAINERS: Add RISC-V

Pull livepatching updates from Jiri Kosina:

 - shadow variables support, allowing livepatches to associate new
   "shadow" fields to existing data structures, from Joe Lawrence

 - pre/post patch callbacks API, allowing livepatch writers to register
   callbacks to be called before and after patch application, from Joe
   Lawrence

* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: __klp_disable_patch() should never be called for disabled patches
  livepatch: Correctly call klp_post_unpatch_callback() in error paths
  livepatch: add transition notices
  livepatch: move transition "complete" notice into klp_complete_transition()
  livepatch: add (un)patch callbacks
  livepatch: Small shadow variable documentation fixes
  livepatch: __klp_shadow_get_or_alloc() is local to shadow.c
  livepatch: introduce shadow variable API

Pull trivial tree updates from Jiri Kosina:
 "The usual rocket-science from trivial tree for 4.15"

* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  MAINTAINERS: relinquish kconfig
  MAINTAINERS: Update my email address
  treewide: Fix typos in Kconfig
  kfifo: Fix comments
  init/Kconfig: Fix module signing document location
  misc: ibmasm: Return error on error path
  HID: logitech-hidpp: fix mistake in printk, "feeback" -> "feedback"
  MAINTAINERS: Correct path to uDraw PS3 driver
  tracing: Fix doc mistakes in trace sample
  tracing: Kconfig text fixes for CONFIG_HWLAT_TRACER
  MIPS: Alchemy: Remove reverted CONFIG_NETLINK_MMAP from db1xxx_defconfig
  mm/huge_memory.c: fixup grammar in comment
  lib/xz: Add fall-through comments to a switch statement

Pull HID updates from Jiri Kosina:

 - high resolution mode for Dell canvas support, from Benjamin Tissoires

 - pen handling fixes for the Wacom driver, from Jason Gerecke

 - i2c-hid: Apollo-Lake based laptops improvements, from Hans de Goede

 - Input/Core: eraser tool support, from Ping Cheng

 - new ALPS touchpad (T4, found currently on HP EliteBook 1000, Zbook
   Stduio and HP Elite book x360) supportm from Masaki Ota

 - other smaller assorted fixes

* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (33 commits)
  HID: cp2112: fix broken gpio_direction_input callback
  HID: cp2112: fix interface specification URL
  HID: Wacom: switch Dell canvas into highres mode
  HID: wacom: generic: Send BTN_STYLUS3 when both barrel switches are set
  HID: sony: Fix SHANWAN pad rumbling on USB
  HID: i2c-hid: Add no-irq-after-reset quirk for 0911:5288 device
  HID: add backlight level quirk for Asus ROG laptops
  HID: cp2112: add HIDRAW dependency
  HID: Add ID 044f:b605 ThrustMaster, Inc. force feedback Racing Wheel
  HID: hid-logitech: remove redundant assignment to pointer value
  HID: wacom: generic: Recognize WACOM_HID_WD_PEN as a type of pen collection
  HID: rmi: Check that a device is a RMI device before calling RMI functions
  HID: add multi-input quirk for GamepadBlock
  HID: alps: add new U1 device ID
  HID: alps: add support for Alps T4 Touchpad device
  HID: alps: remove variables local to u1_init() from the device struct
  HID: alps: properly handle max_fingers and minimum on X and Y axis
  HID: alps: Separate U1 device code
  HID: alps: delete unnecessary struct u1_dev devInfo
  HID: usbhid: Convert timers to use timer_setup()
  ...

syzbot easily found a regression added in our latest patches [1]

No longer set tp->highest_sack to the head of the send queue since
this is not logical and error prone.

Only sack processing should maintain the pointer to an skb from rtx queue.

We might in the future only remember the sequence instead of a pointer to skb,
since rb-tree should allow a fast lookup.

[1]
BUG: KASAN: use-after-free in tcp_highest_sack_seq include/net/tcp.h:1706 [inline]
BUG: KASAN: use-after-free in tcp_ack+0x42bb/0x4fd0 net/ipv4/tcp_input.c:3537
Read of size 4 at addr ffff8801c154faa8 by task syz-executor4/12860

CPU: 0 PID: 12860 Comm: syz-executor4 Not tainted 4.14.0-next-20171113+ #41
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x194/0x257 lib/dump_stack.c:53
 print_address_description+0x73/0x250 mm/kasan/report.c:252
 kasan_report_error mm/kasan/report.c:351 [inline]
 kasan_report+0x25b/0x340 mm/kasan/report.c:409
 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:429
 tcp_highest_sack_seq include/net/tcp.h:1706 [inline]
 tcp_ack+0x42bb/0x4fd0 net/ipv4/tcp_input.c:3537
 tcp_rcv_established+0x672/0x18a0 net/ipv4/tcp_input.c:5439
 tcp_v4_do_rcv+0x2ab/0x7d0 net/ipv4/tcp_ipv4.c:1468
 sk_backlog_rcv include/net/sock.h:909 [inline]
 __release_sock+0x124/0x360 net/core/sock.c:2264
 release_sock+0xa4/0x2a0 net/core/sock.c:2778
 tcp_sendmsg+0x3a/0x50 net/ipv4/tcp.c:1462
 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:763
 sock_sendmsg_nosec net/socket.c:632 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:642
 ___sys_sendmsg+0x75b/0x8a0 net/socket.c:2048
 __sys_sendmsg+0xe5/0x210 net/socket.c:2082
 SYSC_sendmsg net/socket.c:2093 [inline]
 SyS_sendmsg+0x2d/0x50 net/socket.c:2089
 entry_SYSCALL_64_fastpath+0x1f/0x96
RIP: 0033:0x452879
RSP: 002b:00007fc9761bfbe8 EFLAGS: 00000212 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000758020 RCX: 0000000000452879
RDX: 0000000000000000 RSI: 0000000020917fc8 RDI: 0000000000000015
RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000212 R12: 00000000006ee3a0
R13: 00000000ffffffff R14: 00007fc9761c06d4 R15: 0000000000000000

Allocated by task 12860:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:447
 set_track mm/kasan/kasan.c:459 [inline]
 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489
 kmem_cache_alloc_node+0x144/0x760 mm/slab.c:3638
 __alloc_skb+0xf1/0x780 net/core/skbuff.c:193
 alloc_skb_fclone include/linux/skbuff.h:1023 [inline]
 sk_stream_alloc_skb+0x11d/0x900 net/ipv4/tcp.c:870
 tcp_sendmsg_locked+0x1341/0x3b80 net/ipv4/tcp.c:1299
 tcp_sendmsg+0x2f/0x50 net/ipv4/tcp.c:1461
 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:763
 sock_sendmsg_nosec net/socket.c:632 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:642
 SYSC_sendto+0x358/0x5a0 net/socket.c:1749
 SyS_sendto+0x40/0x50 net/socket.c:1717
 entry_SYSCALL_64_fastpath+0x1f/0x96

Freed by task 12860:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:447
 set_track mm/kasan/kasan.c:459 [inline]
 kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524
 __cache_free mm/slab.c:3492 [inline]
 kmem_cache_free+0x77/0x280 mm/slab.c:3750
 kfree_skbmem+0xdd/0x1d0 net/core/skbuff.c:603
 __kfree_skb+0x1d/0x20 net/core/skbuff.c:642
 sk_wmem_free_skb include/net/sock.h:1419 [inline]
 tcp_rtx_queue_unlink_and_free include/net/tcp.h:1682 [inline]
 tcp_clean_rtx_queue net/ipv4/tcp_input.c:3111 [inline]
 tcp_ack+0x1b17/0x4fd0 net/ipv4/tcp_input.c:3593
 tcp_rcv_established+0x672/0x18a0 net/ipv4/tcp_input.c:5439
 tcp_v4_do_rcv+0x2ab/0x7d0 net/ipv4/tcp_ipv4.c:1468
 sk_backlog_rcv include/net/sock.h:909 [inline]
 __release_sock+0x124/0x360 net/core/sock.c:2264
 release_sock+0xa4/0x2a0 net/core/sock.c:2778
 tcp_sendmsg+0x3a/0x50 net/ipv4/tcp.c:1462
 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:763
 sock_sendmsg_nosec net/socket.c:632 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:642
 ___sys_sendmsg+0x75b/0x8a0 net/socket.c:2048
 __sys_sendmsg+0xe5/0x210 net/socket.c:2082
 SYSC_sendmsg net/socket.c:2093 [inline]
 SyS_sendmsg+0x2d/0x50 net/socket.c:2089
 entry_SYSCALL_64_fastpath+0x1f/0x96

The buggy address belongs to the object at ffff8801c154fa80
 which belongs to the cache skbuff_fclone_cache of size 456
The buggy address is located 40 bytes inside of
 456-byte region [ffff8801c154fa80, ffff8801c154fc48)
The buggy address belongs to the page:
page:ffffea00070553c0 count:1 mapcount:0 mapping:ffff8801c154f080 index:0x0
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffff8801c154f080 0000000000000000 0000000100000006
raw: ffffea00070a5a20 ffffea0006a18360 ffff8801d9ca0500 0000000000000000
page dumped because: kasan: bad access detected

Fixes: 737ff314 ("tcp: use sequence distance to detect reordering")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

geneve->sock4/6 were added with geneve_open and released with geneve_stop.
So when geneve link down, we will not able to show remote address and
checksum info after commit 11387fe4 ("geneve: fix fill_info when using
collect_metadata").

Fix this by avoid passing *_REMOTE{,6} for COLLECT_METADATA since they are
mutually exclusive, and always show UDP_ZERO_CSUM6_RX info.

Fixes: 11387fe4 ("geneve: fix fill_info when using collect_metadata")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pcpu_freelist_pop() needs the same lockdep awareness than
pcpu_freelist_populate() to avoid a false positive.

 [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]

 switchto-defaul/12508 [HC0[0]:SC0[6]:HE0:SE0] is trying to acquire:
  (&htab->buckets[i].lock){......}, at: [<ffffffff9dc099cb>] __htab_percpu_map_update_elem+0x1cb/0x300

 and this task is already holding:
  (dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2){+.-...}, at: [<ffffffff9e135848>] __dev_queue_xmit+0
x868/0x1240
 which would create a new lock dependency:
  (dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2){+.-...} -> (&htab->buckets[i].lock){......}

 but this new dependency connects a SOFTIRQ-irq-safe lock:
  (dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2){+.-...}
 ... which became SOFTIRQ-irq-safe at:
   [<ffffffff9db5931b>] __lock_acquire+0x42b/0x1f10
   [<ffffffff9db5b32c>] lock_acquire+0xbc/0x1b0
   [<ffffffff9da05e38>] _raw_spin_lock+0x38/0x50
   [<ffffffff9e135848>] __dev_queue_xmit+0x868/0x1240
   [<ffffffff9e136240>] dev_queue_xmit+0x10/0x20
   [<ffffffff9e1965d9>] ip_finish_output2+0x439/0x590
   [<ffffffff9e197410>] ip_finish_output+0x150/0x2f0
   [<ffffffff9e19886d>] ip_output+0x7d/0x260
   [<ffffffff9e19789e>] ip_local_out+0x5e/0xe0
   [<ffffffff9e197b25>] ip_queue_xmit+0x205/0x620
   [<ffffffff9e1b8398>] tcp_transmit_skb+0x5a8/0xcb0
   [<ffffffff9e1ba152>] tcp_write_xmit+0x242/0x1070
   [<ffffffff9e1baffc>] __tcp_push_pending_frames+0x3c/0xf0
   [<ffffffff9e1b3472>] tcp_rcv_established+0x312/0x700
   [<ffffffff9e1c1acc>] tcp_v4_do_rcv+0x11c/0x200
   [<ffffffff9e1c3dc2>] tcp_v4_rcv+0xaa2/0xc30
   [<ffffffff9e191107>] ip_local_deliver_finish+0xa7/0x240
   [<ffffffff9e191a36>] ip_local_deliver+0x66/0x200
   [<ffffffff9e19137d>] ip_rcv_finish+0xdd/0x560
   [<ffffffff9e191e65>] ip_rcv+0x295/0x510
   [<ffffffff9e12ff88>] __netif_receive_skb_core+0x988/0x1020
   [<ffffffff9e130641>] __netif_receive_skb+0x21/0x70
   [<ffffffff9e1306ff>] process_backlog+0x6f/0x230
   [<ffffffff9e132129>] net_rx_action+0x229/0x420
   [<ffffffff9da07ee8>] __do_softirq+0xd8/0x43d
   [<ffffffff9e282bcc>] do_softirq_own_stack+0x1c/0x30
   [<ffffffff9dafc2f5>] do_softirq+0x55/0x60
   [<ffffffff9dafc3a8>] __local_bh_enable_ip+0xa8/0xb0
   [<ffffffff9db4c727>] cpu_startup_entry+0x1c7/0x500
   [<ffffffff9daab333>] start_secondary+0x113/0x140

 to a SOFTIRQ-irq-unsafe lock:
  (&head->lock){+.+...}
 ... which became SOFTIRQ-irq-unsafe at:
 ...  [<ffffffff9db5971f>] __lock_acquire+0x82f/0x1f10
   [<ffffffff9db5b32c>] lock_acquire+0xbc/0x1b0
   [<ffffffff9da05e38>] _raw_spin_lock+0x38/0x50
   [<ffffffff9dc0b7fa>] pcpu_freelist_pop+0x7a/0xb0
   [<ffffffff9dc08b2c>] htab_map_alloc+0x50c/0x5f0
   [<ffffffff9dc00dc5>] SyS_bpf+0x265/0x1200
   [<ffffffff9e28195f>] entry_SYSCALL_64_fastpath+0x12/0x17

 other info that might help us debug this:

 Chain exists of:
   dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2 --> &htab->buckets[i].lock --> &head->lock

  Possible interrupt unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&head->lock);
                                local_irq_disable();
                                lock(dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2);
                                lock(&htab->buckets[i].lock);
   <Interrupt>
     lock(dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2);

  *** DEADLOCK ***

Fixes: e19494ed ("bpf: introduce percpu_freelist")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The GetNtbFormat and SetNtbFormat requests operate on 16 bit little
endian values. We get away with ignoring this most of the time, because
we only care about USB_CDC_NCM_NTB16_FORMAT which is 0x0000.  This
fails for USB_CDC_NCM_NTB32_FORMAT.

Fix comparison between LE value from device and constant by converting
the constant to LE.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Fixes: 2b02c20c ("cdc_ncm: Set NTB format again after altsetting switch for Huawei devices")
Cc: Enrico Mioso <mrkiko.rs@gmail.com>
Cc: Christian Panton <christian@panton.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-By: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- High resolution mode for DEll canvas support, from Benjamin Tissoires
- A lot of improvements to pen handling in the Wacom driver, from Jason Gerecke
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

- usbhid: conversion to timer_setup() and from_timer() from Kees Cook
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

- cp2112: GPIO error handling and Kconfig fixes from Sébastien Szymanski
- i2c-hid: fixup / quirk for Apollo-Lake based laptops, from Hans de Goede
- Input/Core: add eraser tool support, from Ping Cheng
- small assorted code fixes
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

- SHANWAN PS3 rumble fix from Bastien Nocera
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

- make sure that we forward MSC_TIMESTAMP in accordance to the specification,
  from Nicolas Boichat
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

- small code fixes for Logitech driver from Colin Ian King