On some boards a platform clock is used as clock for the r8169 chip,
this commit adds support for getting and enabling this clock (assuming
it has an "ether_clk" alias set on it).

This is related to commit d31fd43c ("clk: x86: Do not gate clocks
enabled by the firmware") which is a previous attempt to fix this for some
x86 boards, but this causes all Cherry Trail SoC using boards to not reach
there lowest power states when suspending.

This commit (together with an atom-pmc-clk driver commit adding the alias)
fixes things properly by making the r8169 get the clock and enable it when
it needs it.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861
Cc: Johannes Stezenbach <js@sig21.net>
Cc: Carlo Caione <carlo@endlessm.com>
Reported-by: Johannes Stezenbach <js@sig21.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit d31fd43c ("clk: x86: Do not gate clocks enabled by the
firmware") causes all unclaimed PMC clocks on Cherry Trail devices to be on
all the time, resulting on the device not being able to reach S0i2 or S0i3
when suspended.

The reason for this commit is that on some Bay Trail / Cherry Trail devices
the ethernet controller uses pmc_plt_clk_4. This commit adds an "ether_clk"
alias, so that the relevant ethernet drivers can try to (optionally) use
this, without needing X86 specific code / hacks, thus fixing ethernet on
these devices without breaking S0i3 support.

This commit uses clkdev_hw_create() to create the alias, mirroring the code
for the already existing "mclk" alias for pmc_plt_clk_3.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861
Cc: Johannes Stezenbach <js@sig21.net>
Cc: Carlo Caione <carlo@endlessm.com>
Reported-by: Johannes Stezenbach <js@sig21.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Intel SoC was prevented from entering lower idle state because
of RTL8106E's ASPM was not enabled.

So enable ASPM on RTL8106E (chip version 39).
Now the Intel SoC can enter lower idle state, power consumption and
temperature are much lower.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There's a small delay after setting ASPM in vendor drivers, r8101 and
r8168.
In addition, those drivers enable ASPM before ClkReq, also change that
to align with vendor driver.

I haven't seen anything bad becasue of this, but I think it's better to
keep in sync with vendor driver.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 072222b4.

I just read that this causes regressions.
Signed-off-by: David S. Miller <davem@davemloft.net>

The current code assumes kcm users know they need to look for the
strparser offset within their bpf program, which is not documented
anywhere and examples laying around do not do.

The actual recv function does handle the offset well, so we can create a
temporary clone of the skb and pull that one up as required for parsing.

The pull itself has a cost if we are pulling beyond the head data,
measured to 2-3% latency in a noisy VM with a local client stressing
that path. The clone's impact seemed too small to measure.

This bug can be exhibited easily by implementing a "trivial" kcm parser
taking the first bytes as size, and on the client sending at least two
such packets in a single write().

Note that bpf sockmap has the same problem, both for parse and for recv,
so it would pulling twice or a real pull within the strparser logic if
anyone cares about that.
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following compile warning:

drivers/net/ethernet/microchip/lan743x_main.c:2964:12: warning: ‘lan743x_pm_suspend’ defined but not used [-Wunused-function]
 static int lan743x_pm_suspend(struct device *dev)
drivers/net/ethernet/microchip/lan743x_main.c:2987:12: warning: ‘lan743x_pm_resume’ defined but not used [-Wunused-function]
 static int lan743x_pm_resume(struct device *dev)
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a cut/paste error and a typo which results in ATU miss violations
not being reported.

Fixes: 0977644c ("net: dsa: mv88e6xxx: Decode ATU problem interrupt")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

In kTLS MSG_PEEK behavior is currently failing, strace example:

  [pid  2430] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 3
  [pid  2430] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 4
  [pid  2430] bind(4, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
  [pid  2430] listen(4, 10)               = 0
  [pid  2430] getsockname(4, {sa_family=AF_INET, sin_port=htons(38855), sin_addr=inet_addr("0.0.0.0")}, [16]) = 0
  [pid  2430] connect(3, {sa_family=AF_INET, sin_port=htons(38855), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
  [pid  2430] setsockopt(3, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
  [pid  2430] setsockopt(3, 0x11a /* SOL_?? */, 1, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
  [pid  2430] accept(4, {sa_family=AF_INET, sin_port=htons(49636), sin_addr=inet_addr("127.0.0.1")}, [16]) = 5
  [pid  2430] setsockopt(5, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
  [pid  2430] setsockopt(5, 0x11a /* SOL_?? */, 2, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
  [pid  2430] close(4)                    = 0
  [pid  2430] sendto(3, "test_read_peek", 14, 0, NULL, 0) = 14
  [pid  2430] sendto(3, "_mult_recs\0", 11, 0, NULL, 0) = 11
  [pid  2430] recvfrom(5, "test_read_peektest_read_peektest"..., 64, MSG_PEEK, NULL, NULL) = 64

As can be seen from strace, there are two TLS records sent,
i) 'test_read_peek' and ii) '_mult_recs\0' where we end up
peeking 'test_read_peektest_read_peektest'. This is clearly
wrong, and what happens is that given peek cannot call into
tls_sw_advance_skb() to unpause strparser and proceed with
the next skb, we end up looping over the current one, copying
the 'test_read_peek' over and over into the user provided
buffer.

Here, we can only peek into the currently held skb (current,
full TLS record) as otherwise we would end up having to hold
all the original skb(s) (depending on the peek depth) in a
separate queue when unpausing strparser to process next
records, minimally intrusive is to return only up to the
current record's size (which likely was what c46234eb
("tls: RX path for ktls") originally intended as well). Thus,
after patch we properly peek the first record:

  [pid  2046] wait4(2075,  <unfinished ...>
  [pid  2075] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 3
  [pid  2075] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 4
  [pid  2075] bind(4, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
  [pid  2075] listen(4, 10)               = 0
  [pid  2075] getsockname(4, {sa_family=AF_INET, sin_port=htons(55115), sin_addr=inet_addr("0.0.0.0")}, [16]) = 0
  [pid  2075] connect(3, {sa_family=AF_INET, sin_port=htons(55115), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
  [pid  2075] setsockopt(3, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
  [pid  2075] setsockopt(3, 0x11a /* SOL_?? */, 1, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
  [pid  2075] accept(4, {sa_family=AF_INET, sin_port=htons(45732), sin_addr=inet_addr("127.0.0.1")}, [16]) = 5
  [pid  2075] setsockopt(5, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
  [pid  2075] setsockopt(5, 0x11a /* SOL_?? */, 2, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
  [pid  2075] close(4)                    = 0
  [pid  2075] sendto(3, "test_read_peek", 14, 0, NULL, 0) = 14
  [pid  2075] sendto(3, "_mult_recs\0", 11, 0, NULL, 0) = 11
  [pid  2075] recvfrom(5, "test_read_peek", 64, MSG_PEEK, NULL, NULL) = 14

Fixes: c46234eb ("tls: RX path for ktls")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Stephen Hemminger says:

====================
hv_netvsc: associate VF and PV device by serial number

The Hyper-V implementation of PCI controller has concept of 32 bit serial number
(not to be confused with PCI-E serial number).  This value is sent in the protocol
from the host to indicate SR-IOV VF device is attached to a synthetic NIC.

Using the serial number (instead of MAC address) to associate the two devices
avoids lots of potential problems when there are duplicate MAC addresses from
tunnels or layered devices.

The patch set is broken into two parts, one is for the PCI controller
and the other is for the netvsc device. Normally, these go through different
trees but sending them together here for better review. The PCI changes
were submitted previously, but the main review comment was "why do you
need this?". This is why.

v2 - slot name can be shorter.
     remove locking when creating pci_slots; see comment for explaination
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Matching network device based on MAC address is problematic
since a non VF network device can be creted with a duplicate MAC
address causing confusion and problems.  The VMBus API does provide
a serial number that is a better matching method.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Hyper-V host API for PCI provides a unique "serial number" which
can be used as basis for sysfs PCI slot table. This can be useful
for cases where userspace wants to find the PCI device based on
serial number.

When an SR-IOV NIC is added, the host sends an attach message
with serial number. The kernel doesn't use the serial number, but
it is useful when doing the same thing in a userspace driver such
as the DPDK. By having /sys/bus/pci/slots/N it provides a direct
way to find the matching PCI device.

There maybe some cases where serial number is not unique such
as when using GPU's. But the PCI slot infrastructure will handle
that.

This has a side effect which may also be useful. The common udev
network device naming policy uses the slot information (rather
than PCI address).
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The recent commit to always forward the VF MAC address to the PF for
approval may not work if the PF driver or the firmware is older.  This
will cause the VF driver to fail during probe:

  bnxt_en 0000:00:03.0 (unnamed net_device) (uninitialized): hwrm req_type 0xf seq id 0x5 error 0xffff
  bnxt_en 0000:00:03.0 (unnamed net_device) (uninitialized): VF MAC address 00:00:17:02:05:d0 not approved by the PF
  bnxt_en 0000:00:03.0: Unable to initialize mac address.
  bnxt_en: probe of 0000:00:03.0 failed with error -99

We fix it by treating the error as fatal only if the VF MAC address is
locally generated by the VF.

Fixes: 707e7e96 ("bnxt_en: Always forward VF MAC address to the PF.")
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Reported-by: Siwei Liu <loseweigh@gmail.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the unlikely case ip6_xmit() has to call skb_realloc_headroom(),
we need to call skb_set_owner_w() before consuming original skb,
otherwise we risk a use-after-free.

Bring IPv6 in line with what we do in IPv4 to fix this.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The operation ~(p100_inb(VG_LAN_CFG_1) & HP100_LINK_UP) returns a value
that is always non-zero and hence the wait for the link to drop always
terminates prematurely.  Fix this by using a logical not operator instead
of a bitwise complement.  This issue has been in the driver since
pre-2.6.12-rc2.

Detected by CoverityScan, CID#114157 ("Logical vs. bitwise operator")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need this new compatibility string as we experienced different behavior
for this 10/100Mbits/s macb interface on this particular SoC.
Backward compatibility is preserved as we keep the alternative strings.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create a new configuration for the sama5d3-macb new compatibility string.
This configuration disables scatter-gather because we experienced lock down
of the macb interface of this particular SoC under very high load.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Net drivers using phylink shouldn't mess with the link carrier
themselves and should let phylink manage it. The mvpp2 driver wasn't
following this best practice as the mac_config() function made calls to
change the link carrier state. This led to wrongly reported carrier link
state which then triggered other issues. This patch fixes this
behaviour.

But the PPv2 driver relied on this misbehaviour in two cases: for fixed
links and when not using phylink (ACPI mode). The later was fixed by
adding an explicit call to link_up(), which when the ACPI mode will use
phylink should be removed.

The fixed link case was relying on the mac_config() function to set the
link up, as we found an issue in phylink_start() which assumes the
carrier is off. If not, the link_up() function is never called. To fix
this, a call to netif_carrier_off() is added just before phylink_start()
so that we do not introduce a regression in the driver.

Fixes: 4bb04326 ("net: mvpp2: phylink support")
Reported-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pppoe_rcv() needs to look back at the Ethernet header in order to
lookup the PPPoE session. Therefore we need to ensure that the mac
header is big enough to contain an Ethernet header. Otherwise
eth_hdr(skb)->h_source might access invalid data.

==================================================================
BUG: KMSAN: uninit-value in __get_item drivers/net/ppp/pppoe.c:172 [inline]
BUG: KMSAN: uninit-value in get_item drivers/net/ppp/pppoe.c:236 [inline]
BUG: KMSAN: uninit-value in pppoe_rcv+0xcef/0x10e0 drivers/net/ppp/pppoe.c:450
CPU: 0 PID: 4543 Comm: syz-executor355 Not tainted 4.16.0+ #87
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:53
 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
 __get_item drivers/net/ppp/pppoe.c:172 [inline]
 get_item drivers/net/ppp/pppoe.c:236 [inline]
 pppoe_rcv+0xcef/0x10e0 drivers/net/ppp/pppoe.c:450
 __netif_receive_skb_core+0x47df/0x4a90 net/core/dev.c:4562
 __netif_receive_skb net/core/dev.c:4627 [inline]
 netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701
 netif_receive_skb+0x230/0x240 net/core/dev.c:4725
 tun_rx_batched drivers/net/tun.c:1555 [inline]
 tun_get_user+0x740f/0x7c60 drivers/net/tun.c:1962
 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990
 call_write_iter include/linux/fs.h:1782 [inline]
 new_sync_write fs/read_write.c:469 [inline]
 __vfs_write+0x7fb/0x9f0 fs/read_write.c:482
 vfs_write+0x463/0x8d0 fs/read_write.c:544
 SYSC_write+0x172/0x360 fs/read_write.c:589
 SyS_write+0x55/0x80 fs/read_write.c:581
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x4447c9
RSP: 002b:00007fff64c8fc28 EFLAGS: 00000297 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004447c9
RDX: 000000000000fd87 RSI: 0000000020000600 RDI: 0000000000000004
RBP: 00000000006cf018 R08: 00007fff64c8fda8 R09: 00007fff00006bda
R10: 0000000000005fe7 R11: 0000000000000297 R12: 00000000004020d0
R13: 0000000000402160 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
 kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
 slab_post_alloc_hook mm/slab.h:445 [inline]
 slab_alloc_node mm/slub.c:2737 [inline]
 __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
 __kmalloc_reserve net/core/skbuff.c:138 [inline]
 __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
 alloc_skb include/linux/skbuff.h:984 [inline]
 alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234
 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085
 tun_alloc_skb drivers/net/tun.c:1532 [inline]
 tun_get_user+0x2242/0x7c60 drivers/net/tun.c:1829
 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990
 call_write_iter include/linux/fs.h:1782 [inline]
 new_sync_write fs/read_write.c:469 [inline]
 __vfs_write+0x7fb/0x9f0 fs/read_write.c:482
 vfs_write+0x463/0x8d0 fs/read_write.c:544
 SYSC_write+0x172/0x360 fs/read_write.c:589
 SyS_write+0x55/0x80 fs/read_write.c:581
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
==================================================================

Fixes: 224cf5ad ("ppp: Move the PPP drivers")
Reported-by: syzbot+f5f6080811c849739212@syzkaller.appspotmail.com
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch mades TI_DAVINCI_CPDMA select GENERIC_ALLOCATOR.
without that, the following sparc64 build failure happen

drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_check_free_tx_desc':
(.text+0x278): undefined reference to `gen_pool_avail'
drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_chan_submit':
(.text+0x340): undefined reference to `gen_pool_alloc'
(.text+0x5c4): undefined reference to `gen_pool_free'
drivers/net/ethernet/ti/davinci_cpdma.o: In function `__cpdma_chan_free':
davinci_cpdma.c:(.text+0x64c): undefined reference to `gen_pool_free'
drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_desc_pool_destroy.isra.6':
davinci_cpdma.c:(.text+0x17ac): undefined reference to `gen_pool_size'
davinci_cpdma.c:(.text+0x17b8): undefined reference to `gen_pool_avail'
davinci_cpdma.c:(.text+0x1824): undefined reference to `gen_pool_size'
davinci_cpdma.c:(.text+0x1830): undefined reference to `gen_pool_avail'
drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_ctlr_create':
(.text+0x19f8): undefined reference to `devm_gen_pool_create'
(.text+0x1a90): undefined reference to `gen_pool_add_virt'
Makefile:1011: recipe for target 'vmlinux' failed
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2018-09-16

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix end boundary calculation in BTF for the type section, from Martin.

2) Fix and revert subtraction of pointers that was accidentally allowed
   for unprivileged programs, from Alexei.

3) Fix bpf_msg_pull_data() helper by using __GFP_COMP in order to avoid
   a warning in linearizing sg pages into a single one for large allocs,
   from Tushar.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

GRO expects skbs not to be owned by sockets, but when XDP is enabled veth
passed skbs owned by sockets. It caused corrupted sk_wmem_alloc.

Paolo Abeni reported the following splat:

[  362.098904] refcount_t overflow at skb_set_owner_w+0x5e/0xa0 in iperf3[1644], uid/euid: 0/0
[  362.108239] WARNING: CPU: 0 PID: 1644 at kernel/panic.c:648 refcount_error_report+0xa0/0xa4
[  362.117547] Modules linked in: tcp_diag inet_diag veth intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate intel_uncore intel_rapl_perf ipmi_ssif iTCO_wdt sg ipmi_si iTCO_vendor_support ipmi_devintf mxm_wmi ipmi_msghandler pcspkr dcdbas mei_me wmi mei lpc_ich acpi_power_meter pcc_cpufreq xfs libcrc32c sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ixgbe igb ttm ahci mdio libahci ptp crc32c_intel drm pps_core libata i2c_algo_bit dca dm_mirror dm_region_hash dm_log dm_mod
[  362.176622] CPU: 0 PID: 1644 Comm: iperf3 Not tainted 4.19.0-rc2.vanilla+ #2025
[  362.184777] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016
[  362.193124] RIP: 0010:refcount_error_report+0xa0/0xa4
[  362.198758] Code: 08 00 00 48 8b 95 80 00 00 00 49 8d 8c 24 80 0a 00 00 41 89 c1 44 89 2c 24 48 89 de 48 c7 c7 18 4d e7 9d 31 c0 e8 30 fa ff ff <0f> 0b eb 88 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 49 89 fc
[  362.219711] RSP: 0018:ffff9ee6ff603c20 EFLAGS: 00010282
[  362.225538] RAX: 0000000000000000 RBX: ffffffff9de83e10 RCX: 0000000000000000
[  362.233497] RDX: 0000000000000001 RSI: ffff9ee6ff6167d8 RDI: ffff9ee6ff6167d8
[  362.241457] RBP: ffff9ee6ff603d78 R08: 0000000000000490 R09: 0000000000000004
[  362.249416] R10: 0000000000000000 R11: ffff9ee6ff603990 R12: ffff9ee664b94500
[  362.257377] R13: 0000000000000000 R14: 0000000000000004 R15: ffffffff9de615f9
[  362.265337] FS:  00007f1d22d28740(0000) GS:ffff9ee6ff600000(0000) knlGS:0000000000000000
[  362.274363] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  362.280773] CR2: 00007f1d222f35d0 CR3: 0000001fddfec003 CR4: 00000000001606f0
[  362.288733] Call Trace:
[  362.291459]  <IRQ>
[  362.293702]  ex_handler_refcount+0x4e/0x80
[  362.298269]  fixup_exception+0x35/0x40
[  362.302451]  do_trap+0x109/0x150
[  362.306048]  do_error_trap+0xd5/0x130
[  362.315766]  invalid_op+0x14/0x20
[  362.319460] RIP: 0010:skb_set_owner_w+0x5e/0xa0
[  362.324512] Code: ef ff ff 74 49 48 c7 43 60 20 7b 4a 9d 8b 85 f4 01 00 00 85 c0 75 16 8b 83 e0 00 00 00 f0 01 85 44 01 00 00 0f 88 d8 23 16 00 <5b> 5d c3 80 8b 91 00 00 00 01 8b 85 f4 01 00 00 89 83 a4 00 00 00
[  362.345465] RSP: 0018:ffff9ee6ff603e20 EFLAGS: 00010a86
[  362.351291] RAX: 0000000000001100 RBX: ffff9ee65deec700 RCX: ffff9ee65e829244
[  362.359250] RDX: 0000000000000100 RSI: ffff9ee65e829100 RDI: ffff9ee65deec700
[  362.367210] RBP: ffff9ee65e829100 R08: 000000000002a380 R09: 0000000000000000
[  362.375169] R10: 0000000000000002 R11: fffff1a4bf77bb00 R12: ffffc0754661d000
[  362.383130] R13: ffff9ee65deec200 R14: ffff9ee65f597000 R15: 00000000000000aa
[  362.391092]  veth_xdp_rcv+0x4e4/0x890 [veth]
[  362.399357]  veth_poll+0x4d/0x17a [veth]
[  362.403731]  net_rx_action+0x2af/0x3f0
[  362.407912]  __do_softirq+0xdd/0x29e
[  362.411897]  do_softirq_own_stack+0x2a/0x40
[  362.416561]  </IRQ>
[  362.418899]  do_softirq+0x4b/0x70
[  362.422594]  __local_bh_enable_ip+0x50/0x60
[  362.427258]  ip_finish_output2+0x16a/0x390
[  362.431824]  ip_output+0x71/0xe0
[  362.440670]  __tcp_transmit_skb+0x583/0xab0
[  362.445333]  tcp_write_xmit+0x247/0xfb0
[  362.449609]  __tcp_push_pending_frames+0x2d/0xd0
[  362.454760]  tcp_sendmsg_locked+0x857/0xd30
[  362.459424]  tcp_sendmsg+0x27/0x40
[  362.463216]  sock_sendmsg+0x36/0x50
[  362.467104]  sock_write_iter+0x87/0x100
[  362.471382]  __vfs_write+0x112/0x1a0
[  362.475369]  vfs_write+0xad/0x1a0
[  362.479062]  ksys_write+0x52/0xc0
[  362.482759]  do_syscall_64+0x5b/0x180
[  362.486841]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  362.492473] RIP: 0033:0x7f1d22293238
[  362.496458] Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 c5 54 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55
[  362.517409] RSP: 002b:00007ffebaef8008 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  362.525855] RAX: ffffffffffffffda RBX: 0000000000002800 RCX: 00007f1d22293238
[  362.533816] RDX: 0000000000002800 RSI: 00007f1d22d36000 RDI: 0000000000000005
[  362.541775] RBP: 00007f1d22d36000 R08: 00000002db777a30 R09: 0000562b70712b20
[  362.549734] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000005
[  362.557693] R13: 0000000000002800 R14: 00007ffebaef8060 R15: 0000562b70712260

In order to avoid this, orphan the skb before entering GRO.

Fixes: 948d4f21 ("veth: Add driver XDP")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Tested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
udp: add missing check on edumx rx path

The early demux RX path for the UDP protocol is currently missing
some checks. Both ipv4 and ipv6 implementations lack checksum conversion
and the ipv6 implementation additionally lack the zero checksum
validation.

The first patch takes care of UDPv4 and the second one of UDPv6
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the UDPv6 early demux rx code path lacks some mandatory
checks, already implemented into the normal RX code path - namely
the checksum conversion and no_check6_rx check.

Similar to the previous commit, we move the common processing to
an UDPv6 specific helper and call it from both edemux code path
and normal code path. In respect to the UDPv4, we need to add an
explicit check for non zero csum according to no_check6_rx value.
Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Xin Long <lucien.xin@gmail.com>
Fixes: c9f2c1ae ("udp6: fix socket leak on early demux")
Fixes: 2abb7cdc ("udp: Add support for doing checksum unnecessary conversion")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 2abb7cdc ("udp: Add support for doing checksum
unnecessary conversion") left out the early demux path for
connected sockets. As a result IP_CMSG_CHECKSUM gives wrong
values for such socket when GRO is not enabled/available.

This change addresses the issue by moving the csum conversion to a
common helper and using such helper in both the default and the
early demux rx path.

Fixes: 2abb7cdc ("udp: Add support for doing checksum unnecessary conversion")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Synopsys DWC Ethernet MAC can be configured to have 1..32, 64, or
128 unicast filter entries. (Table 7-8 MAC Address Registers from
databook) Fix dwmac1000_validate_ucast_entries() to accept values
between 1 and 32 in addition.
Signed-off-by: Jongsung Kim <neidhard.kim@lge.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Matteo reported the following splat, testing the datapath of TC 'sample':

 BUG: KASAN: null-ptr-deref in tcf_sample_act+0xc4/0x310
 Read of size 8 at addr 0000000000000000 by task nc/433

 CPU: 0 PID: 433 Comm: nc Not tainted 4.19.0-rc3-kvm #17
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS ?-20180531_142017-buildhw-08.phx2.fedoraproject.org-1.fc28 04/01/2014
 Call Trace:
  kasan_report.cold.6+0x6c/0x2fa
  tcf_sample_act+0xc4/0x310
  ? dev_hard_start_xmit+0x117/0x180
  tcf_action_exec+0xa3/0x160
  tcf_classify+0xdd/0x1d0
  htb_enqueue+0x18e/0x6b0
  ? deref_stack_reg+0x7a/0xb0
  ? htb_delete+0x4b0/0x4b0
  ? unwind_next_frame+0x819/0x8f0
  ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
  __dev_queue_xmit+0x722/0xca0
  ? unwind_get_return_address_ptr+0x50/0x50
  ? netdev_pick_tx+0xe0/0xe0
  ? save_stack+0x8c/0xb0
  ? kasan_kmalloc+0xbe/0xd0
  ? __kmalloc_track_caller+0xe4/0x1c0
  ? __kmalloc_reserve.isra.45+0x24/0x70
  ? __alloc_skb+0xdd/0x2e0
  ? sk_stream_alloc_skb+0x91/0x3b0
  ? tcp_sendmsg_locked+0x71b/0x15a0
  ? tcp_sendmsg+0x22/0x40
  ? __sys_sendto+0x1b0/0x250
  ? __x64_sys_sendto+0x6f/0x80
  ? do_syscall_64+0x5d/0x150
  ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
  ? __sys_sendto+0x1b0/0x250
  ? __x64_sys_sendto+0x6f/0x80
  ? do_syscall_64+0x5d/0x150
  ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
  ip_finish_output2+0x495/0x590
  ? ip_copy_metadata+0x2e0/0x2e0
  ? skb_gso_validate_network_len+0x6f/0x110
  ? ip_finish_output+0x174/0x280
  __tcp_transmit_skb+0xb17/0x12b0
  ? __tcp_select_window+0x380/0x380
  tcp_write_xmit+0x913/0x1de0
  ? __sk_mem_schedule+0x50/0x80
  tcp_sendmsg_locked+0x49d/0x15a0
  ? tcp_rcv_established+0x8da/0xa30
  ? tcp_set_state+0x220/0x220
  ? clear_user+0x1f/0x50
  ? iov_iter_zero+0x1ae/0x590
  ? __fget_light+0xa0/0xe0
  tcp_sendmsg+0x22/0x40
  __sys_sendto+0x1b0/0x250
  ? __ia32_sys_getpeername+0x40/0x40
  ? _copy_to_user+0x58/0x70
  ? poll_select_copy_remaining+0x176/0x200
  ? __pollwait+0x1c0/0x1c0
  ? ktime_get_ts64+0x11f/0x140
  ? kern_select+0x108/0x150
  ? core_sys_select+0x360/0x360
  ? vfs_read+0x127/0x150
  ? kernel_write+0x90/0x90
  __x64_sys_sendto+0x6f/0x80
  do_syscall_64+0x5d/0x150
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7fefef2b129d
 Code: ff ff ff ff eb b6 0f 1f 80 00 00 00 00 48 8d 05 51 37 0c 00 41 89 ca 8b 00 85 c0 75 20 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 6b f3 c3 66 0f 1f 84 00 00 00 00 00 41 56 41
 RSP: 002b:00007fff2f5350c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
 RAX: ffffffffffffffda RBX: 000056118d60c120 RCX: 00007fefef2b129d
 RDX: 0000000000002000 RSI: 000056118d629320 RDI: 0000000000000003
 RBP: 000056118d530370 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000002000
 R13: 000056118d5c2a10 R14: 000056118d5c2a10 R15: 000056118d5303b8

tcf_sample_act() tried to update its per-cpu stats, but tcf_sample_init()
forgot to allocate them, because tcf_idr_create() was called with a wrong
value of 'cpustats'. Setting it to true proved to fix the reported crash.
Reported-by: Matteo Croce <mcroce@redhat.com>
Fixes: 65a206c0 ("net/sched: Change act_api and act_xxx modules to use IDR")
Fixes: 5c5670fa ("net/sched: Introduce sample tc action")
Tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As reported by Reobert O'Callahan, since Viro's commit to kill
dev_ifsioc() we attempt to copy too much data in compat mode,
which may lead to EFAULT when the 32-bit version of struct ifreq
sits at/near the end of a page boundary, and the next page isn't
mapped.

Fix this by passing the approprate compat/non-compat size to copy
and using that, as before the dev_ifsioc() removal. This works
because only the embedded "struct ifmap" has different size, and
this is only used in SIOCGIFMAP/SIOCSIFMAP which has a different
handler. All other parts of the union are naturally compatible.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=199469.

Fixes: bf440573 ("kill dev_ifsioc()")
Reported-by: Robert O'Callahan <robert@ocallahan.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When splitting a GSO segment that consists of encapsulated packets, the
skb->mac_len of the segments can end up being set wrong, causing packet
drops in particular when using act_mirred and ifb interfaces in
combination with a qdisc that splits GSO packets.

This happens because at the time skb_segment() is called, network_header
will point to the inner header, throwing off the calculation in
skb_reset_mac_len(). The network_header is subsequently adjust by the
outer IP gso_segment handlers, but they don't set the mac_len.

Fix this by adding skb_reset_mac_len() calls to both the IPv4 and IPv6
gso_segment handlers, after they modify the network_header.

Many thanks to Eric Dumazet for his help in identifying the cause of
the bug.
Acked-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Johan Hedberg says:

====================
pull request: bluetooth 2018-09-13

A few Bluetooth fixes for the 4.19-rc series:

 - Fixed rw_semaphore leak in hci_ldisc
 - Fixed local Out-of-Band pairing data handling

Let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Sabrina Dubroca says:

====================
tls: don't leave keys in kernel memory

There are a few places where the RX/TX key for a TLS socket is copied
to kernel memory. This series clears those memory areas when they're no
longer needed.

v2: add union tls_crypto_context, following Vakul Garg's comment
    swap patch 2 and 3, using new union in patch 3
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes: 3c4d7559 ("tls: kernel TLS support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This contains key material in crypto_send_aes_gcm_128 and
crypto_recv_aes_gcm_128.

Introduce union tls_crypto_context, and replace the two identical
unions directly embedded in struct tls_context with it. We can then
use this union to clean up the memory in the new tls_ctx_free()
function.

Fixes: 3c4d7559 ("tls: kernel TLS support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

There's no need to copy the key to an on-stack buffer before calling
crypto_aead_setkey().

Fixes: 3c4d7559 ("tls: kernel TLS support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update 'confirmed' timestamp when ARP packet is received. It shouldn't
affect locktime logic and anyway entry can be confirmed by any higher-layer
protocol. Thus it makes sense to confirm it when ARP packet is received.

Fixes: 77d71233 ("neighbour: update neigh timestamps iff update is effective")
Signed-off-by: Vasily Khoruzhick <vasilykh@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fix addresses https://bugzilla.kernel.org/show_bug.cgi?id=201071

Commit 5025f7f7 wrongly relied on __dev_change_flags to notify users of
dev flag changes in the case when dev->rtnl_link_state = RTNL_LINK_INITIALIZED.
Fix it by indicating flag changes explicitly to __dev_notify_flags.

Fixes: 5025f7f7 ("rtnetlink: add rtnl_link_state check in rtnl_configure_link")
Reported-By: Liam mcbirnie <liam.mcbirnie@boeing.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fields ->dev and ->next of struct ipddp_route may be copied to
userspace on the SIOCFINDIPDDPRT ioctl. This is only accessible
to CAP_NET_ADMIN though. Let's manually copy the relevant fields
instead of using memcpy().

BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

When netvsc device is removed it can call reschedule in RCU context.
This happens because canceling the subchannel setup work could (in theory)
cause a reschedule when manipulating the timer.

To reproduce, run with lockdep enabled kernel and unbind
a network device from hv_netvsc (via sysfs).

[  160.682011] WARNING: suspicious RCU usage
[  160.707466] 4.19.0-rc3-uio+ #2 Not tainted
[  160.709937] -----------------------------
[  160.712352] ./include/linux/rcupdate.h:302 Illegal context switch in RCU read-side critical section!
[  160.723691]
[  160.723691] other info that might help us debug this:
[  160.723691]
[  160.730955]
[  160.730955] rcu_scheduler_active = 2, debug_locks = 1
[  160.762813] 5 locks held by rebind-eth.sh/1812:
[  160.766851]  #0: 000000008befa37a (sb_writers#6){.+.+}, at: vfs_write+0x184/0x1b0
[  160.773416]  #1: 00000000b097f236 (&of->mutex){+.+.}, at: kernfs_fop_write+0xe2/0x1a0
[  160.783766]  #2: 0000000041ee6889 (kn->count#3){++++}, at: kernfs_fop_write+0xeb/0x1a0
[  160.787465]  #3: 0000000056d92a74 (&dev->mutex){....}, at: device_release_driver_internal+0x39/0x250
[  160.816987]  #4: 0000000030f6031e (rcu_read_lock){....}, at: netvsc_remove+0x1e/0x250 [hv_netvsc]
[  160.828629]
[  160.828629] stack backtrace:
[  160.831966] CPU: 1 PID: 1812 Comm: rebind-eth.sh Not tainted 4.19.0-rc3-uio+ #2
[  160.832952] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012
[  160.832952] Call Trace:
[  160.832952]  dump_stack+0x85/0xcb
[  160.832952]  ___might_sleep+0x1a3/0x240
[  160.832952]  __flush_work+0x57/0x2e0
[  160.832952]  ? __mutex_lock+0x83/0x990
[  160.832952]  ? __kernfs_remove+0x24f/0x2e0
[  160.832952]  ? __kernfs_remove+0x1b2/0x2e0
[  160.832952]  ? mark_held_locks+0x50/0x80
[  160.832952]  ? get_work_pool+0x90/0x90
[  160.832952]  __cancel_work_timer+0x13c/0x1e0
[  160.832952]  ? netvsc_remove+0x1e/0x250 [hv_netvsc]
[  160.832952]  ? __lock_is_held+0x55/0x90
[  160.832952]  netvsc_remove+0x9a/0x250 [hv_netvsc]
[  160.832952]  vmbus_remove+0x26/0x30
[  160.832952]  device_release_driver_internal+0x18a/0x250
[  160.832952]  unbind_store+0xb4/0x180
[  160.832952]  kernfs_fop_write+0x113/0x1a0
[  160.832952]  __vfs_write+0x36/0x1a0
[  160.832952]  ? rcu_read_lock_sched_held+0x6b/0x80
[  160.832952]  ? rcu_sync_lockdep_assert+0x2e/0x60
[  160.832952]  ? __sb_start_write+0x141/0x1a0
[  160.832952]  ? vfs_write+0x184/0x1b0
[  160.832952]  vfs_write+0xbe/0x1b0
[  160.832952]  ksys_write+0x55/0xc0
[  160.832952]  do_syscall_64+0x60/0x1b0
[  160.832952]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  160.832952] RIP: 0033:0x7fe48f4c8154

Resolve this by getting RTNL earlier. This is safe because the subchannel
work queue does trylock on RTNL and will detect the race.

Fixes: 7b2ee50c ("hv_netvsc: common detach logic")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When we delete a chain of filters, we need to notify
user-space we are deleting each filters in this chain
too.

Fixes: 32a4f5ec ("net: sched: introduce chain object to uapi")
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 57f230ab ("xen/netfront: raise max number of slots in
xennet_get_responses()") raised the max number of allowed slots by one.
This seems to be problematic in some configurations with netback using
a larger MAX_SKB_FRAGS value (e.g. old Linux kernel with MAX_SKB_FRAGS
defined as 18 instead of nowadays 17).

Instead of BUG_ON() in this case just fall back to retransmission.

Fixes: 57f230ab ("xen/netfront: raise max number of slots in xennet_get_responses()")
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>