- 26 Apr, 2007 40 commits
-
-
David Howells authored
Implement the CB.InitCallBackState3 operation for the fileserver to call. This reduces the amount of network traffic because if this op is aborted, the fileserver will then attempt an CB.InitCallBackState operation. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Howells authored
Add support for the CB.GetCapabilities operation with which the fileserver can ask the client for the following information: (1) The list of network interfaces it has available as IPv4 address + netmask plus the MTUs. (2) The client's UUID. (3) The extended capabilities of the client, for which the only current one is unified error mapping (abort code interpretation). To support this, the patch adds the following routines to AFS: (1) A function to iterate through all the network interfaces using RTNETLINK to extract IPv4 addresses and MTUs. (2) A function to iterate through all the network interfaces using RTNETLINK to pull out the MAC address of the lowest index interface to use in UUID construction. Signed-off-by: -
David Howells authored
Update the AFS fs documentation. Signed-off-by:
-
David Howells authored
Add security support to the AFS filesystem. Kerberos IV tickets are added as RxRPC keys are added to the session keyring with the klog program. open() and other VFS operations then find this ticket with request_key() and either use it immediately (eg: mkdir, unlink) or attach it to a file descriptor (open). Signed-off-by:
-
David Howells authored
Handle multiple mounts of an AFS superblock correctly, checking to see whether the superblock is already initialised after calling sget() rather than just unconditionally stamping all over it. Also delete the "silent" parameter to afs_fill_super() as it's not used and can, in any case, be obtained from sb->s_flags. Signed-off-by:
-
David Howells authored
Delete the old RxRPC code as it's now no longer used. Signed-off-by:
-
David Howells authored
Make the in-kernel AFS filesystem use AF_RXRPC instead of the old RxRPC code. Signed-off-by:
-
David Howells authored
Add an interface to the AF_RXRPC module so that the AFS filesystem module can more easily make use of the services available. AFS still opens a socket but then uses the action functions in lieu of sendmsg() and registers an intercept functions to grab messages before they're queued on the socket Rx queue. This permits AFS (or whatever) to: (1) Avoid the overhead of using the recvmsg() call. (2) Use different keys directly on individual client calls on one socket rather than having to open a whole slew of sockets, one for each key it might want to use. (3) Avoid calling request_key() at the point of issue of a call or opening of a socket. This is done instead by AFS at the point of open(), unlink() or other VFS operation and the key handed through. (4) Request the use of something other than GFP_KERNEL to allocate memory. Furthermore: (*) The socket buffer markings used by RxRPC are made available for AFS so that it can interpret the cooked RxRPC messages itself. (*) rxgen (un)marshalling abort codes are made available. The following documentation for the kernel interface is added to Documentation/networking/rxrpc.txt: ========================= AF_RXRPC KERNEL INTERFACE ========================= The AF_RXRPC module also provides an interface for use by in-kernel utilities such as the AFS filesystem. This permits such a utility to: (1) Use different keys directly on individual client calls on one socket rather than having to open a whole slew of sockets, one for each key it might want to use. (2) Avoid having RxRPC call request_key() at the point of issue of a call or opening of a socket. Instead the utility is responsible for requesting a key at the appropriate point. AFS, for instance, would do this during VFS operations such as open() or unlink(). The key is then handed through when the call is initiated. (3) Request the use of something other than GFP_KERNEL to allocate memory. (4) Avoid the overhead of using the recvmsg() call. RxRPC messages can be intercepted before they get put into the socket Rx queue and the socket buffers manipulated directly. To use the RxRPC facility, a kernel utility must still open an AF_RXRPC socket, bind an addess as appropriate and listen if it's to be a server socket, but then it passes this to the kernel interface functions. The kernel interface functions are as follows: (*) Begin a new client call. struct rxrpc_call * rxrpc_kernel_begin_call(struct socket *sock, struct sockaddr_rxrpc *srx, struct key *key, unsigned long user_call_ID, gfp_t gfp); This allocates the infrastructure to make a new RxRPC call and assigns call and connection numbers. The call will be made on the UDP port that the socket is bound to. The call will go to the destination address of a connected client socket unless an alternative is supplied (srx is non-NULL). If a key is supplied then this will be used to secure the call instead of the key bound to the socket with the RXRPC_SECURITY_KEY sockopt. Calls secured in this way will still share connections if at all possible. The user_call_ID is equivalent to that supplied to sendmsg() in the control data buffer. It is entirely feasible to use this to point to a kernel data structure. If this function is successful, an opaque reference to the RxRPC call is returned. The caller now holds a reference on this and it must be properly ended. (*) End a client call. void rxrpc_kernel_end_call(struct rxrpc_call *call); This is used to end a previously begun call. The user_call_ID is expunged from AF_RXRPC's knowledge and will not be seen again in association with the specified call. (*) Send data through a call. int rxrpc_kernel_send_data(struct rxrpc_call *call, struct msghdr *msg, size_t len); This is used to supply either the request part of a client call or the reply part of a server call. msg.msg_iovlen and msg.msg_iov specify the data buffers to be used. msg_iov may not be NULL and must point exclusively to in-kernel virtual addresses. msg.msg_flags may be given MSG_MORE if there will be subsequent data sends for this call. The msg must not specify a destination address, control data or any flags other than MSG_MORE. len is the total amount of data to transmit. (*) Abort a call. void rxrpc_kernel_abort_call(struct rxrpc_call *call, u32 abort_code); This is used to abort a call if it's still in an abortable state. The abort code specified will be placed in the ABORT message sent. (*) Intercept received RxRPC messages. typedef void (*rxrpc_interceptor_t)(struct sock *sk, unsigned long user_call_ID, struct sk_buff *skb); void rxrpc_kernel_intercept_rx_messages(struct socket *sock, rxrpc_interceptor_t interceptor); This installs an interceptor function on the specified AF_RXRPC socket. All messages that would otherwise wind up in the socket's Rx queue are then diverted to this function. Note that care must be taken to process the messages in the right order to maintain DATA message sequentiality. The interceptor function itself is provided with the address of the socket and handling the incoming message, the ID assigned by the kernel utility to the call and the socket buffer containing the message. The skb->mark field indicates the type of message: MARK MEANING =============================== ======================================= RXRPC_SKB_MARK_DATA Data message RXRPC_SKB_MARK_FINAL_ACK Final ACK received for an incoming call RXRPC_SKB_MARK_BUSY Client call rejected as server busy RXRPC_SKB_MARK_REMOTE_ABORT Call aborted by peer RXRPC_SKB_MARK_NET_ERROR Network error detected RXRPC_SKB_MARK_LOCAL_ERROR Local error encountered RXRPC_SKB_MARK_NEW_CALL New incoming call awaiting acceptance The remote abort message can be probed with rxrpc_kernel_get_abort_code(). The two error messages can be probed with rxrpc_kernel_get_error_number(). A new call can be accepted with rxrpc_kernel_accept_call(). Data messages can have their contents extracted with the usual bunch of socket buffer manipulation functions. A data message can be determined to be the last one in a sequence with rxrpc_kernel_is_data_last(). When a data message has been used up, rxrpc_kernel_data_delivered() should be called on it.. Non-data messages should be handled to rxrpc_kernel_free_skb() to dispose of. It is possible to get extra refs on all types of message for later freeing, but this may pin the state of a call until the message is finally freed. (*) Accept an incoming call. struct rxrpc_call * rxrpc_kernel_accept_call(struct socket *sock, unsigned long user_call_ID); This is used to accept an incoming call and to assign it a call ID. This function is similar to rxrpc_kernel_begin_call() and calls accepted must be ended in the same way. If this function is successful, an opaque reference to the RxRPC call is returned. The caller now holds a reference on this and it must be properly ended. (*) Reject an incoming call. int rxrpc_kernel_reject_call(struct socket *sock); This is used to reject the first incoming call on the socket's queue with a BUSY message. -ENODATA is returned if there were no incoming calls. Other errors may be returned if the call had been aborted (-ECONNABORTED) or had timed out (-ETIME). (*) Record the delivery of a data message and free it. void rxrpc_kernel_data_delivered(struct sk_buff *skb); This is used to record a data message as having been delivered and to update the ACK state for the call. The socket buffer will be freed. (*) Free a message. void rxrpc_kernel_free_skb(struct sk_buff *skb); This is used to free a non-DATA socket buffer intercepted from an AF_RXRPC socket. (*) Determine if a data message is the last one on a call. bool rxrpc_kernel_is_data_last(struct sk_buff *skb); This is used to determine if a socket buffer holds the last data message to be received for a call (true will be returned if it does, false if not). The data message will be part of the reply on a client call and the request on an incoming call. In the latter case there will be more messages, but in the former case there will not. (*) Get the abort code from an abort message. u32 rxrpc_kernel_get_abort_code(struct sk_buff *skb); This is used to extract the abort code from a remote abort message. (*) Get the error number from a local or network error message. int rxrpc_kernel_get_error_number(struct sk_buff *skb); This is used to extract the error number from a message indicating either a local error occurred or a network error occurred. Signed-off-by: -
David Howells authored
Clean up the AFS sources. Also remove references to AFS keys. RxRPC keys are used instead. Signed-off-by:
-
David Howells authored
Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by:
-
David Howells authored
Export try_to_del_timer_sync() for use by the AF_RXRPC module. Signed-off-by:
-
David Howells authored
Export the keyring key type definition and document its availability. Add alternative types into the key's type_data union to make it more useful. Not all users necessarily want to use it as a list_head (AF_RXRPC doesn't, for example), so make it clear that it can be used in other ways. Signed-off-by:
-
Oleg Nesterov authored
del_timer_sync() buys nothing for cancel_delayed_work(), but it is less efficient since it locks the timer unconditionally, and may wait for the completion of the delayed_work_timer_fn(). cancel_delayed_work() == 0 means: before this patch: work->func may still be running or queued after this patch: work->func may still be running or queued, or delayed_work_timer_fn->__queue_work() in progress. The latter doesn't differ from the caller's POV, delayed_work_timer_fn() is called with _PENDING bit set. cancel_delayed_work() == 1 with this patch adds a new possibility: delayed_work->work was cancelled, but delayed_work_timer_fn is still running (this is only possible for the re-arming works on single-threaded workqueue). In this case the timer was re-started by work->func(), nobody else can do this. This in turn means that delayed_work_timer_fn has already passed __queue_work() (and wont't touch delayed_work) because nobody else can queue delayed_work->work. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Signed-Off-By:
-
Jamal Hadi Salim authored
This brings the SAD info in sync with net-2.6.22/net-2.6 Signed-off-by:
Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by:
-
Matthias Kaehlcke authored
(akpm: remove CVS control string too) Signed-off-by:
Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andrew Morton authored
Set TASK_INTERRUPTIBLE prior to testing the flag to avoid missed wakeups. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Alexandra N. Kossovsky authored
Fix bonding driver documentation for the case of multiple bonding interfaces. Signed-off-by:
"Alexandra N. Kossovsky" <Alexandra.Kossovsky@oktetlabs.ru> Acked-by:
Jay Vosburgh <fubar@us.ibm.com> Signed-off-by:
-
Milind Arun Choudhary authored
SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead Signed-off-by:
Milind Arun Choudhary <milindchoudhary@gmail.com> Signed-off-by:
-
Andrew Morton authored
Fix http://bugzilla.kernel.org/show_bug.cgi?id=8343Signed-off-by:
Samuel Ortiz <samuel@sortiz.org> Signed-off-by:
-
Martin Peschke authored
We can save some lines of code by using seq_release_private(). Signed-off-by:
Martin Peschke <mp3@de.ibm.com> Acked-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
Alexey Dobriyan authored
CC [M] net/iucv/iucv.o net/iucv/iucv.c: In function 'iucv_init': net/iucv/iucv.c:1556: error: 'iucv_cpu_notifier' undeclared (first use in this function) Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Milind Arun Choudhary authored
ROUND_UP macro cleanup use DIV_ROUND_UP Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Brian Braunstein authored
Fixed tun/tap driver's handling of hw addresses. The hw address is stored in both the net_device.dev_addr and tun.dev_addr fields. These fields were not kept synchronized, and in fact weren't even initialized to the same value. Now during both init and when performing SIOCSIFHWADDR on the tun device these values are both updated. However, if SIOCSIFHWADDR is performed on the net device directly (for instance, setting the hw address using ifconfig), the tun device does not get updated. Perhaps the tun.dev_addr field should be removed completely at some point, as it is redundant and net_device.dev_addr can be used anywhere it is used. Signed-off-by:
Brian Braunstein <linuxkernel@bristyle.com> Signed-off-by:
-
Robert P. J. Day authored
Delete the unreferenced header file include/linux/if_wanpipe_common.h, as well as the reference to it in the Doc file. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Signed-off-by:
-
Robert P. J. Day authored
Delete the unreferenced header file include/linux/sdla_fr.h. Signed-off-by:
-
Adrian Bunk authored
- make the following needlessly global variables static: - core/rtnetlink.c: struct rtnl_msg_handlers[] - netfilter/nf_conntrack_proto.c: struct nf_ct_protos[] - make the following needlessly global functions static: - core/rtnetlink.c: rtnl_dump_all() - netlink/af_netlink.c: netlink_queue_skip() Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Andrew Morton authored
drivers/net/hamradio/yam.c: In function `yam_tx_byte': drivers/net/hamradio/yam.c:643: warning: passing arg 1 of `skb_copy_from_linear_data_offset' from incompatible pointer type Signed-off-by:
-
Jean Delvare authored
I noticed recently that, in skb_checksum(), "offset" and "start" are essentially the same thing and have the same value throughout the function, despite being computed differently. Using a single variable allows some cleanups and makes the skb_checksum() function smaller, more readable, and presumably marginally faster. We appear to have many other "sk_buff walker" functions built on the exact same model, so the cleanup applies to them, too. Here is a list of the functions I found to be affected: net/appletalk/ddp.c:atalk_sum_skb() net/core/datagram.c:skb_copy_datagram_iovec() net/core/datagram.c:skb_copy_and_csum_datagram() net/core/skbuff.c:skb_copy_bits() net/core/skbuff.c:skb_store_bits() net/core/skbuff.c:skb_checksum() net/core/skbuff.c:skb_copy_and_csum_bit() net/core/user_dma.c:dma_skb_copy_datagram_iovec() net/xfrm/xfrm_algo.c:skb_icv_walk() net/xfrm/xfrm_algo.c:skb_to_sgvec() OTOH, I admit I'm a bit surprised, the cleanup is rather obvious so I'm really wondering if I am missing something. Can anyone please comment on this? Signed-off-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
Jamal Hadi Salim authored
On a system with a lot of SAs, counting SAD entries chews useful CPU time since you need to dump the whole SAD to user space; i.e something like ip xfrm state ls | grep -i src | wc -l I have seen taking literally minutes on a 40K SAs when the system is swapping. With this patch, some of the SAD info (that was already being tracked) is exposed to user space. i.e you do: ip xfrm state count And you get the count; you can also pass -s to the command line and get the hash info. Signed-off-by:
-
Stephen Hemminger authored
Writing to /sys/class/net/brX/bridge/stp_state causes a warning because RTNL is not held when call br_stp_if.c Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
-
Stephen Hemminger authored
If a bridge is not running STP, then it has no way to detect a cycle in the network. But if it is not running STP and some other machine or device is running STP, then if STP BPDU's get forwarded to it can detect the cycle. This is how the old 2.4 and early 2.6 code worked. Signed-off-by:
-
Stephen Hemminger authored
Pause frames should never make it out of the network device into the stack. But if a device was misconfigured, it might happen. So drop pause frames in bridge. Signed-off-by:
-
Stephen Hemminger authored
The change to forward STP bpdu's (for usermode STP) through normal path, changed the packet type in the process. Since link local stuff is multicast, it should stay pkt_type = PACKET_MULTICAST. The code was probably copy/pasted incorrectly from the bridge pseudo-device receive path. Signed-off-by:
-
YOSHIFUJI Hideaki authored
Because ndisc_send_na(), ndisc_send_ns() and ndisc_send_rs() are almost identical, so let's unify their common part. With gcc (GCC) 3.3.5 (Debian 1:3.3.5-13) on i386, Before: text data bss dec hex filename 14689 364 24 15077 3ae5 net/ipv6/ndisc.o After: text data bss dec hex filename 12317 364 24 12705 31a1 net/ipv6/ndisc.o Signed-off-by:YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
YOSHIFUJI Hideaki authored
Signed-off-by: -
YOSHIFUJI Hideaki authored
Signed-off-by: -
YOSHIFUJI Hideaki authored
Signed-off-by: -
YOSHIFUJI Hideaki authored
Signed-off-by: -
YOSHIFUJI Hideaki authored
Signed-off-by: -
David S. Miller authored
obj-$(CONFIG_PROC_FS) --> ipv6-$(CONFIG_PROC_FS) Signed-off-by:
-
