- 30 Jul, 2008 11 commits
-
-
Suresh Siddha authored
On cpu's supporting xsave/xrstor, fpstate pointer in the sigcontext, will include the extended state information along with fpstate information. Presence of extended state information is indicated by the presence of FP_XSTATE_MAGIC1 at fpstate.sw_reserved.magic1 and FP_XSTATE_MAGIC2 at fpstate + (fpstate.sw_reserved.extended_size - FP_XSTATE_MAGIC2_SIZE). Extended feature bit mask that is saved in the memory layout is represented by the fpstate.sw_reserved.xstate_bv For RT signal frames, UC_FP_XSTATE in the uc_flags also indicate the presence of extended state information in the sigcontext's fpstate pointer. Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Suresh Siddha authored
Bytes 464..511 in the current 512byte layout of fxsave/fxrstor frame, are reserved for SW usage. On cpu's supporting xsave/xrstor, these bytes are used to extended the fpstate pointer in the sigcontext, which now includes the extended state information along with fpstate information. Signed-off-by:
-
Suresh Siddha authored
Signed-off-by:
-
Suresh Siddha authored
move 64bit routines that saves/restores fpstate in/from user stack from signal_64.c to xsave.c restore_i387_xstate() now handles the condition when user passes NULL fpstate. Other misc changes for prepartion of xsave/xrstor sigcontext support. Signed-off-by:
-
Suresh Siddha authored
dynamically allocate fpstate on the stack, instead of static allocation in the current sigframe layout on the user stack. This will allow the fpstate structure to grow in the future, which includes extended state information supporting xsave/xrstor. signal handlers will be able to access the fpstate pointer from the sigcontext structure asusual, with no change. For the non RT sigframe's (which are supported only for 32bit apps), current static fpstate layout in the sigframe will be unused(so that we don't change the extramask[] offset in the sigframe and thus prevent breaking app's which modify extramask[]). Signed-off-by:
-
Suresh Siddha authored
Uses xsave/xrstor (instead of traditional fxsave/fxrstor) in context switch when available. Introduces TS_XSAVE flag, which determine the need to use xsave/xrstor instructions during context switch instead of the legacy fxsave/fxrstor instructions. Thread-synchronous status word is already in L1 cache during this code patch and thus minimizes the performance penality compared to (cpu_has_xsave) checks. Signed-off-by:
-
Suresh Siddha authored
Enables xsave/xrstor by turning on cr4.osxsave on cpu's which have the xsave support. For now, features that OS supports/enabled are FP and SSE. Signed-off-by:
-
Suresh Siddha authored
Add xsave CPU feature bits. Signed-off-by:
-
Ingo Molnar authored
-
Ingo Molnar authored
Conflicts: include/asm-x86/dma-mapping.h include/asm-x86/namei.h include/asm-x86/uaccess.h Signed-off-by: -
Ingo Molnar authored
-
- 29 Jul, 2008 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest: turn Waker into a thread, not a process lguest: Enlarge virtio rings lguest: Use GSO/IFF_VNET_HDR extensions on tun/tap lguest: Remove 'network: no dma buffer!' warning lguest: Adaptive timeout lguest: Tell Guest net not to notify us on every packet xmit lguest: net block unneeded receive queue update notifications lguest: wrap last_avail accesses. lguest: use cpu capability accessors lguest: virtio-rng support lguest: Support assigning a MAC address lguest: Don't leak /dev/zero fd lguest: fix verbose printing of device features. lguest: fix switcher_page leak on unload lguest: Guest int3 fix lguest: set max_pfn_mapped, growl loudly at Yinghai Lu
-
git://git.o-hand.com/linux-mfdLinus Torvalds authored
* 'for-linus' of git://git.o-hand.com/linux-mfd: mfd: accept pure device as a parent, not only platform_device mfd: add platform_data to mfd_cell mfd: Coding style fixes mfd: Use to_platform_device instead of container_of
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (21 commits) x86/PCI: use dev_printk when possible PCI: add D3 power state avoidance quirk PCI: fix bogus "'device' may be used uninitialized" warning in pci_slot PCI: add an option to allow ASPM enabled forcibly PCI: disable ASPM on pre-1.1 PCIe devices PCI: disable ASPM per ACPI FADT setting PCI MSI: Don't disable MSIs if the mask bit isn't supported PCI: handle 64-bit resources better on 32-bit machines PCI: rewrite PCI BAR reading code PCI: document pci_target_state PCI hotplug: fix typo in pcie hotplug output x86 gart: replace to_pages macro with iommu_num_pages x86, AMD IOMMU: replace to_pages macro with iommu_num_pages iommu: add iommu_num_pages helper function dma-coherent: add documentation to new interfaces Cris: convert to using generic dma-coherent mem allocator Sh: use generic per-device coherent dma allocator ARM: support generic per-device coherent dma mem Generic dma-coherent: fix DMA_MEMORY_EXCLUSIVE x86: use generic per-device dma coherent allocator ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] qla2xxx: fix msleep compile error
-
Linus Torvalds authored
Alexey Dobriyan reported trouble with LTP with the new fast-gup code, and Johannes Weiner debugged it to non-page-aligned addresses, where the new get_user_pages_fast() code would do all the wrong things, including just traversing past the end of the requested area due to 'addr' never matching 'end' exactly. This is not a pretty fix, and we may actually want to move the alignment into generic code, leaving just the core code per-arch, but Alexey verified that the vmsplice01 LTP test doesn't crash with this. Reported-and-tested-by:
Alexey Dobriyan <adobriyan@gmail.com> Debugged-by:
Johannes Weiner <hannes@saeurebad.de> Cc: Nick Piggin <npiggin@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 28 Jul, 2008 23 commits
-
-
Rusty Russell authored
lguest uses a Waker process to break it out of the kernel (ie. actually running the guest) when file descriptor needs attention. Changing this from a process to a thread somewhat simplifies things: it can directly access the fd_set of things to watch. More importantly, it means that the Waker can see Guest memory correctly, so /dev/vring file descriptors will work as anticipated (the alternative is to actually mmap MAP_SHARED, but you can't do that with /dev/zero). Signed-off-by:Rusty Russell <rusty@rustcorp.com.au>
-
Rusty Russell authored
With big packets, 128 entries is a little small. Guest -> Host 1GB TCP: Before: 8.43625 seconds xmit 95640 recv 198266 timeout 49771 usec 1252 After: 8.01099 seconds xmit 49200 recv 102263 timeout 26014 usec 2118 Signed-off-by: -
Rusty Russell authored
Guest -> Host 1GB TCP: Before 20.1974 seconds xmit 214510 recv 5 timeout 214491 usec 278 After 8.43625 seconds xmit 95640 recv 198266 timeout 49771 usec 1252 Host -> Guest 1GB TCP: Before: Seconds 9.98854 xmit 172166 recv 5344 timeout 172157 usec 251 After: Seconds 5.72803 xmit 244322 recv 9919 timeout 244302 usec 156 Signed-off-by: -
Rusty Russell authored
This warning can happen a lot under load, and it should be warnx not warn anwyay. Signed-off-by: -
Rusty Russell authored
Since the correct timeout value varies, use a heuristic which adjusts the timeout depending on how many packets we've seen. This gives slightly worse results, but doesn't need tweaking when GSO is introduced. 500 usec 19.1887 xmit 561141 recv 1 timeout 559657 Dynamic (278) 20.1974 xmit 214510 recv 5 timeout 214491 usec 278 Signed-off-by: -
Rusty Russell authored
virtio_ring has the ability to suppress notifications. This prevents a guest exit for every packet, but we need to set a timer on packet receipt to re-check if there were any remaining packets. Here are the times for 1G TCP Guest->Host with different timeout settings (it matters because the TCP window doesn't grow big enough to fill the entire buffer): Timeout value Seconds Xmit/Recv/Timeout None (before) 25.3784 xmit 7750233 recv 1 2500 usec 62.5119 xmit 207020 recv 2 timeout 207020 1000 usec 34.5379 xmit 207003 recv 2 timeout 207003 750 usec 29.2305 xmit 207002 recv 1 timeout 207002 500 usec 19.1887 xmit 561141 recv 1 timeout 559657 250 usec 20.0465 xmit 214128 recv 2 timeout 214110 100 usec 19.2583 xmit 561621 recv 1 timeout 560153 (Note that these values are sensitive to the GSO patches which come later, and probably other traffic-related variables, so take with a large grain of salt). Signed-off-by: -
Rusty Russell authored
Number of exits transmitting 10GB Guest->Host before: network xmit 7858610 recv 118136 After: network xmit 7750233 recv 1 Signed-off-by: -
Rusty Russell authored
To simplify the transition to when we publish indices in the ring (and make shuffling my patch queue easier), wrap them in a lg_last_avail() macro. Signed-off-by: -
Andrew Morton authored
To support my little make-x86-bitops-use-proper-typechecking projectlet. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
-
Rusty Russell authored
This is a simple patch to add support for the virtio "hardware random generator" to lguest. It gets about 1.2 MB/sec reading from /dev/hwrng in the guest. Signed-off-by: -
Mark McLoughlin authored
If you've got a nice DHCP configuration which maps MAC addresses to specific IP addresses, then you're going to want to start your guest with one of those MAC addresses. Also, in Fedora, we have persistent network interface naming based on the MAC address, so with randomly assigned addresses you're soon going to hit eth13. Who knows what will happen then! Allow assigning a MAC address to the network interface with e.g. --tunnet=bridge:eth0:00:FF:95:6B:DA:3D or: --tunnet=192.168.121.1:00:FF:95:6B:DA:3D which is pretty unintelligable, but ... (includes Rusty's minor rework) Signed-off-by:
Mark McLoughlin <markmc@redhat.com> Signed-off-by:
-
Mark McLoughlin authored
Signed-off-by:
-
Rusty Russell authored
%02x is more appropriate for bytes than %08x. Signed-off-by: -
Johannes Weiner authored
map_switcher allocates the array, unmap_switcher has to free it accordingly. Signed-off-by:
-
Rusty Russell authored
Ron Minnich noticed that guest userspace gets a GPF when it tries to int3: we need to copy the privilege level from the guest-supplied IDT to the real IDT. int3 is the only common case where guest userspace expects to invoke an interrupt, so that's the symptom of failing to do this. Signed-off-by: -
Rusty Russell authored
6af61a76 'x86: clean up max_pfn_mapped usage - 32-bit' makes the following comment: XEN PV and lguest may need to assign max_pfn_mapped too. But no CC. Yinghai, wasting fellow developers' time is a VERY bad habit. If you do it again, I will hunt you down and try to extract the three hours of my life I just lost :) Signed-off-by:
-
Dmitry Baryshkov authored
Signed-off-by:
Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by:
Samuel Ortiz <sameo@openedhand.com>
-
Andrew Morton authored
arch/x86/mm/pgtable.c: In function 'pgd_mop_up_pmds': arch/x86/mm/pgtable.c:194: warning: unused variable 'pmd' Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Manuel Lauss authored
The computed color value is never actually written to hardware colormap register. Signed-off-by:
Manuel Lauss <mano@roarinelk.homelinux.net> Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Cc: Munakata Hisao <munakata.hisao@renesas.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Eric Sandeen authored
With SLUB debugging turned on in 2.6.26, I was getting memory corruption when testing eCryptfs. The root cause turned out to be that eCryptfs was doing kmalloc(PAGE_CACHE_SIZE); virt_to_page() and treating that as a nice page-aligned chunk of memory. But at least with SLUB debugging on, this is not always true, and the page we get from virt_to_page does not necessarily match the PAGE_CACHE_SIZE worth of memory we got from kmalloc. My simple testcase was 2 loops doing "rm -f fileX; cp /tmp/fileX ." for 2 different multi-megabyte files. With this change I no longer see the corruption. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Acked-by:
Michael Halcrow <mhalcrow@us.ibm.com> Acked-by:
Rik van Riel <riel@redhat.com> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by:
-
Atsushi Nemoto authored
If CONFIG_GENERIC_GPIO=y && CONFIG_GPIO_SYSFS=n, gpio_export() in asm-generic/gpio.h refers -ENOSYS and causes build error. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Yoichi Yuasa authored
I got section mismatch message about bio_integrity_init_slab(). WARNING: fs/built-in.o(__ksymtab+0xb60): Section mismatch in reference from the variable __ksymtab_bio_integrity_init_slab to the function .init.text:bio_integrity_init_slab() The symbol bio_integrity_init_slab is exported and annotated __init Fix this by removing the __init annotation of bio_integrity_init_slab or drop the export. It only call from init_bio(). The EXPORT_SYMBOL() can be removed. Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Hisashi Hifumi authored
When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by:Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
