- 26 Apr, 2013 3 commits
-
-
Yogesh Ashok Powar authored
PCI regions are associated with the device using pci_request_region() call. Hence use pci_release_region() instead of pci_release_regions(). Cc: <stable@vger.kernel.org> # 3.2+ Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
-
John W. Linville authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
-
- 23 Apr, 2013 37 commits
-
-
Andreas Fenkart authored
FW does the synchronization of the different modules during init. It will report different modules, that it is ready at different times. The fw download 'winner' will be reported fw ready first. Without this patch, btmrvl was already continuing before the FW told it too. Probably on behalf of the 'winner' which then never sees FW ready and times out. Signed-off-by:
Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Andreas Fenkart authored
If not winner, driver must release the sdio host lock, so the fw download can progress. While holding the lock fw download is stalled and the following error is produced: [ 235.746015] Bluetooth: FW failed to be active in time! [ 235.752799] Bluetooth: Downloading firmware failed! Signed-off-by:
-
Andy Shevchenko authored
Clean up the code by using native debugfs helpers, instead of implementing them ourselves: debugfs_create_u8() debugfs_create_x16() debugfs_create_file() debugfs_remove_recursive() Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Marcel Holtmann authored
The CID is fixed to L2CAP ATT channel and so there is no need to hand it down to the handling function. Just use a constant instead. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Acked-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Fengguang Wu authored
There are new sparse warnings show up in tree: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next master head: a0b644b0385fa58ca578f6dce4473e8a8e6f6c38 commit: 75e84b7c Bluetooth: Add __hci_cmd_sync() helper function date: 13 days ago >> net/bluetooth/hci_core.c:82:16: sparse: symbol 'hci_get_cmd_complete' was not declared. Should it be static? Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Acked-by:
-
Tedd Ho-Jeong An authored
This patch adds support for Intel Bluetooth device by adding btusb_setup_intel() routine that update the device with ROM patch. T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=07dc Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Tedd Ho-Jeong An <tedd.an@intel.com> Acked-by:
-
Johan Hedberg authored
The Bluetooth Core Specification (4.0) defines the Write LE Host Supported HCI command as only available for controllers supporting BR/EDR. This is further reflected in the Read Local Extended Features HCI command also not being available for LE-only controllers. In other words, host-side LE support is implicit for single-mode LE controllers and doesn't have explicit HCI-level enablement. This patch ensures that the LE setting is always exposed as enabled through mgmt and returns a "rejected" response if user space tries to toggle the setting. The patch also ensures that Write LE Host Supported is never sent for LE-only controllers. Signed-off-by:
-
Andreas Fenkart authored
Rotate bss prio list, so the bss next to the one served, will come first in the list of bss' with equal priority. This way we pick bss nodes in a round robin fashion. Using list rotation instead of a cur ptr simplifies iteration to calling list_for_each_entry. List rotation is done via list_move, where the head itself is temporarily removed and then re-inserted after the bss just served. Signed-off-by:
-
Andreas Fenkart authored
After a packet is successfully transmitted, ra list is rotated, so the ra next to the one transmitted, will be the first in the list. This way we pick the ra' in a round robin fashion. This significantly simplifies iteration in mwifiex_wmm_get_highest_priolist_ptr to a call to list_for_each_entry. List rotation is done via list_move, where the head itself is temporarily removed and then re-inserted after the item just transferred. Signed-off-by:
-
Arend van Spriel authored
The firmware provides credits to the driver per WMM-AC. When only AC_BE are to be transmitted to the firmware the driver may use credits from other priorities to send AC_BE packets towards the firmware. Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
In brcmf_fws_init() the error flows were not properly handled and the caller ignored the return value. The only action that is allowed to fail in brcmf_fws_init() is setting the tlv in firmware as the feature is not supported on all devices. Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by:
-
Arend van Spriel authored
When firmware signals the driver to remove a destination entry it may have sk_buff packets queued for it. These should be freed. Reviewed-by:
-
Piotr Haber authored
Adds support for the critical protocol API provided by nl80211 which gives Wifi traffic priority over a Bluetooth (e)SCO connection and disables scanning during DCHP negotiation. Reviewed-by:
Piotr Haber <phaber@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
During the DHCP protocol exchange it is benificial to suppress scan requests which may decrease time to complete DHCP protocol. Reviewed-by:
-
Sujith Manoharan authored
After the commit "ath9k: improve dma map failure handling", the wrong buffer was DMA-unmapped, introducing warnings like the one below. This patch fixes the issue. WARNING: at /home/sujith/dev/wireless-testing/lib/dma-debug.c:986 check_sync+0x4bc/0x580() Hardware name: LIFEBOOK AH531 ath9k 0000:02:00.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x00000000d9012800] [size=48 bytes] Pid: 86, comm: kworker/u:5 Tainted: G W O 3.9.0-rc8-wl-debug #106 Call Trace: [<ffffffff810410c0>] warn_slowpath_common+0x70/0xa0 [<ffffffff8104113c>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff8125432c>] check_sync+0x4bc/0x580 [<ffffffff8109e5f7>] ? trace_hardirqs_on_caller+0xa7/0x190 [<ffffffff8109e6ed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81254488>] debug_dma_sync_single_for_device+0x48/0x50 [<ffffffffa0a53825>] ? ath9k_iowrite32+0x35/0x90 [ath9k] [<ffffffff812512f0>] ? swiotlb_tbl_sync_single+0x50/0x90 [<ffffffff81251350>] ? swiotlb_sync_single+0x20/0x30 [<ffffffff8125137f>] ? swiotlb_sync_single_for_device+0xf/0x20 [<ffffffffa0a58baf>] ath_rx_edma_buf_link+0xef/0x140 [ath9k] [<ffffffffa0a58c4e>] ath_rx_addbuffer_edma+0x4e/0x90 [ath9k] [<ffffffffa0a59c51>] ath_startrecv+0xf1/0x120 [ath9k] [<ffffffffa0a550e0>] ath_complete_reset+0x20/0x130 [ath9k] [<ffffffffa0a5790d>] ath_reset_internal+0x10d/0x210 [ath9k] [<ffffffffa0a5878c>] ath9k_config+0x47c/0x7b0 [ath9k] [<ffffffffa06d4978>] ieee80211_hw_config+0x88/0x3f0 [mac80211] [<ffffffffa06d4a3f>] ? ieee80211_hw_config+0x14f/0x3f0 [mac80211] [<ffffffffa06dbed1>] __ieee80211_scan_completed+0xc1/0x440 [mac80211] [<ffffffffa06dd002>] ieee80211_scan_work+0x82/0x440 [mac80211] [<ffffffff810606a3>] process_one_work+0x1e3/0x530 [<ffffffff81060641>] ? process_one_work+0x181/0x530 [<ffffffff8106163f>] worker_thread+0x10f/0x3c0 [<ffffffff81061530>] ? manage_workers+0x330/0x330 [<ffffffff810665da>] kthread+0xea/0xf0 [<ffffffff810664f0>] ? kthread_create_on_node+0x140/0x140 [<ffffffff8146085c>] ret_from_fork+0x7c/0xb0 [<ffffffff810664f0>] ? kthread_create_on_node+0x140/0x140 Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Acked-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Sujith Manoharan authored
The RX fifo can be accessed from the common tasklet or it can be reaped/cleaned when RX is stopped, which is done when doing a reset or channel change - this happens in process context. Since it is ensured that there are no pending tasklets when stopping RX and cleaning the FIFO, there is no need to use SKB queue functions which take internal locks. Signed-off-by:
-
Sujith Manoharan authored
The EDMA case is handled first, so the else condition can be removed. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
-
Felix Fietkau authored
The split makes no sense and merging the functions makes further changes easier to implement Signed-off-by:
-
Han Shen authored
GCC 4.8 is spitting out uninitialized-variable warnings against "drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c". This patch adds initialization to the variable and properly sets its value. Signed-off-by: Han Shen (shenhan@google.com) Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Mathias Kretschmer authored
According to 802.11-2007 17.3.8.6 (slot time), the slot time should be increased by 3 us * coverage class. The code only increased the ack timeout, which is fixed by this patch. We have noticed in our long shot scenario that we see less collisions with this patch. Signed-off-by:
Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [add standard reference and commit message] Signed-off-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by:
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessJohn W. Linville authored
Conflicts: drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
-
Rafał Miłecki authored
All radio ops are 16b (there is only 1 exception for reg 0x1), so we deprecated b43_radio_read16 and b43_radio_write16 long time ago. Signed-off-by:Rafał Miłecki <zajec5@gmail.com>
-
Rafał Miłecki authored
Sort defines, use one macro for all revs, support for 5GHz when uploading antenna table. Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Also make a function name shorter so we can easily fit 80 chars. Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Thanks to Broadcom releasing some code we can use better names. Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by:
-
