- 30 Aug, 2018 16 commits
-
-
Doug Berger authored
When using the fixed PHY with GENET (e.g. MOCA) the PHY link status can be determined from the internal link status captured by the MAC. This allows the PHY state machine to use the correct link state with the fixed PHY even if MAC link event interrupts are missed when the net device is opened. Fixes: 8d88c6eb ("net: bcmgenet: enable MoCA link state change detection") Signed-off-by:
Doug Berger <opendmb@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dinh Nguyen authored
The Stratix10 SoC is an AARCH64 based platform that shares the same ethernet controller that is on other SoCFPGA platforms. Build the platform driver. Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
-
David S. Miller authored
Sabrina Dubroca says: ==================== ipv6: fix error path of inet6_init() The error path of inet6_init() can trigger multiple kernel panics, mostly due to wrong ordering of cleanups. This series fixes those issues. ==================== Reviewed-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Sabrina Dubroca authored
rtnl_unregister_all(PF_INET6) gets called from inet6_init in cases when no handler has been registered for PF_INET6 yet, for example if ip6_mr_init() fails. Abort and avoid a NULL pointer deref in that case. Example of panic (triggered by faking a failure of register_pernet_subsys): general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI [...] RIP: 0010:rtnl_unregister_all+0x17e/0x2a0 [...] Call Trace: ? rtnetlink_net_init+0x250/0x250 ? sock_unregister+0x103/0x160 ? kernel_getsockopt+0x200/0x200 inet6_init+0x197/0x20d Fixes: e2fddf5e ("[IPV6]: Make af_inet6 to check ip6_route_init return value.") Signed-off-by:Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Sabrina Dubroca authored
Commit 6d0bfe22 ("net: ipv6: Add IPv6 support to the ping socket.") contains an error in the cleanup path of inet6_init(): when proto_register(&pingv6_prot, 1) fails, we try to unregister &pingv6_prot. When rawv6_init() fails, we skip unregistering &pingv6_prot. Example of panic (triggered by faking a failure of proto_register(&pingv6_prot, 1)): general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI [...] RIP: 0010:__list_del_entry_valid+0x79/0x160 [...] Call Trace: proto_unregister+0xbb/0x550 ? trace_preempt_on+0x6f0/0x6f0 ? sock_no_shutdown+0x10/0x10 inet6_init+0x153/0x1b8 Fixes: 6d0bfe22 ("net: ipv6: Add IPv6 support to the ping socket.") Signed-off-by:
-
Sabrina Dubroca authored
Commit 15e66807 ("ipv6: reorder icmpv6_init() and ip6_mr_init()") moved the cleanup label for ipmr_fail, but should have changed the contents of the cleanup labels as well. Now we can end up cleaning up icmpv6 even though it hasn't been initialized (jump to icmp_fail or ipmr_fail). Simply undo things in the reverse order of their initialization. Example of panic (triggered by faking a failure of icmpv6_init): kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI [...] RIP: 0010:__list_del_entry_valid+0x79/0x160 [...] Call Trace: ? lock_release+0x8a0/0x8a0 unregister_pernet_operations+0xd4/0x560 ? ops_free_list+0x480/0x480 ? down_write+0x91/0x130 ? unregister_pernet_subsys+0x15/0x30 ? down_read+0x1b0/0x1b0 ? up_read+0x110/0x110 ? kmem_cache_create_usercopy+0x1b4/0x240 unregister_pernet_subsys+0x1d/0x30 icmpv6_cleanup+0x1d/0x30 inet6_init+0x1b5/0x23f Fixes: 15e66807 ("ipv6: reorder icmpv6_init() and ip6_mr_init()") Signed-off-by:
-
Davide Caratti authored
in the (rare) case of failure in nla_nest_start(), missing NULL checks in tcf_pedit_key_ex_dump() can make the following command # tc action add action pedit ex munge ip ttl set 64 dereference a NULL pointer: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 800000007d1cd067 P4D 800000007d1cd067 PUD 7acd3067 PMD 0 Oops: 0002 [#1] SMP PTI CPU: 0 PID: 3336 Comm: tc Tainted: G E 4.18.0.pedit+ #425 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:tcf_pedit_dump+0x19d/0x358 [act_pedit] Code: be 02 00 00 00 48 89 df 66 89 44 24 20 e8 9b b1 fd e0 85 c0 75 46 8b 83 c8 00 00 00 49 83 c5 08 48 03 83 d0 00 00 00 4d 39 f5 <66> 89 04 25 00 00 00 00 0f 84 81 01 00 00 41 8b 45 00 48 8d 4c 24 RSP: 0018:ffffb5d4004478a8 EFLAGS: 00010246 RAX: ffff8880fcda2070 RBX: ffff8880fadd2900 RCX: 0000000000000000 RDX: 0000000000000002 RSI: ffffb5d4004478ca RDI: ffff8880fcda206e RBP: ffff8880fb9cb900 R08: 0000000000000008 R09: ffff8880fcda206e R10: ffff8880fadd2900 R11: 0000000000000000 R12: ffff8880fd26cf40 R13: ffff8880fc957430 R14: ffff8880fc957430 R15: ffff8880fb9cb988 FS: 00007f75a537a740(0000) GS:ffff8880fda00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000007a2fa005 CR4: 00000000001606f0 Call Trace: ? __nla_reserve+0x38/0x50 tcf_action_dump_1+0xd2/0x130 tcf_action_dump+0x6a/0xf0 tca_get_fill.constprop.31+0xa3/0x120 tcf_action_add+0xd1/0x170 tc_ctl_action+0x137/0x150 rtnetlink_rcv_msg+0x263/0x2d0 ? _cond_resched+0x15/0x40 ? rtnl_calcit.isra.30+0x110/0x110 netlink_rcv_skb+0x4d/0x130 netlink_unicast+0x1a3/0x250 netlink_sendmsg+0x2ae/0x3a0 sock_sendmsg+0x36/0x40 ___sys_sendmsg+0x26f/0x2d0 ? do_wp_page+0x8e/0x5f0 ? handle_pte_fault+0x6c3/0xf50 ? __handle_mm_fault+0x38e/0x520 ? __sys_sendmsg+0x5e/0xa0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f75a4583ba0 Code: c3 48 8b 05 f2 62 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d fd c3 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ae cc 00 00 48 89 04 24 RSP: 002b:00007fff60ee7418 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fff60ee7540 RCX: 00007f75a4583ba0 RDX: 0000000000000000 RSI: 00007fff60ee7490 RDI: 0000000000000003 RBP: 000000005b842d3e R08: 0000000000000002 R09: 0000000000000000 R10: 00007fff60ee6ea0 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff60ee7554 R14: 0000000000000001 R15: 000000000066c100 Modules linked in: act_pedit(E) ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul ext4 crc32_pclmul mbcache ghash_clmulni_intel jbd2 pcbc snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd snd_timer cryptd glue_helper snd joydev pcspkr soundcore virtio_balloon i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net net_failover virtio_blk virtio_console failover qxl crc32c_intel drm_kms_helper syscopyarea serio_raw sysfillrect sysimgblt fb_sys_fops ttm drm ata_piix virtio_pci libata virtio_ring i2c_core virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_pedit] CR2: 0000000000000000 Like it's done for other TC actions, give up dumping pedit rules and return an error if nla_nest_start() returns NULL. Fixes: 71d0ed70 ("net/act_pedit: Support using offset relative to the conventional network headers") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Chris Brandt authored
Add support for the R7S9210 which is part of the RZ/A2 series. Signed-off-by:
Chris Brandt <chris.brandt@renesas.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
David S. Miller authored
Peng Li says: ==================== net: hns: fix some bugs about speed and duplex change If there are packets in hardware when changing the spped or duplex, it may cause hardware hang up. This patchset adds the code for waiting chip to clean the all pkts(TX & RX) in chip when the driver uses the function named "adjust link". This patchset cleans the pkts as follows: 1) close rx of chip, close tx of protocol stack. 2) wait rcb, ppe, mac to clean. 3) adjust link 4) open rx of chip, open tx of protocol stack. ==================== Signed-off-by: -
Peng Li authored
If there are packets in hardware when changing the speed or duplex, it may cause hardware hang up. This patch adds netif_carrier_off before change speed and duplex in ethtool_ops.set_link_ksettings, and adds netif_carrier_on after complete the change. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Peng Li authored
If there are packets in hardware when changing the speed or duplex, it may cause hardware hang up. This patch adds the code for waiting chip to clean the all pkts(TX & RX) in chip when the driver uses the function named "adjust link". This patch cleans the pkts as follows: 1) close rx of chip, close tx of protocol stack. 2) wait rcb, ppe, mac to clean. 3) adjust link 4) open rx of chip, open tx of protocol stack. Signed-off-by:
-
Azat Khuzhin authored
I have two Ethernet adapters: r8169 0000:03:01.0 eth0: RTL8169sb/8110sb, 00:14:d1:14:2d:49, XID 10000000, IRQ 18 r8169 0000:01:00.0 eth0: RTL8168e/8111e, 64:66:b3:11:14:5d, XID 2c200000, IRQ 30 And after upgrading from linux 4.15 [1] to linux 4.18+ [2] RTL8169sb failed to receive any packets. tcpdump shows a lot of checksum mismatch. [1]: a0f79386 [2]: 05193597 (4.19 merge window opened) I started bisecting and the found that [3] breaks it. According to [4]: "For 8110S, 8110SB, and 8110SC series, the initial value of RxConfig needs to be set after the tx/rx is enabled." So I moved rtl_init_rxcfg() after enabling tx/rs and now my adapter works (RTL8168e works too). [3]: 3559d81e [4]: e542a226 ("r8169: adjust the RxConfig settings.") Also drop "rx" from rtl_set_rx_tx_config_registers(), since it does nothing with it already. Fixes: 3559d81e ("r8169: simplify rtl_hw_start_8169") Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Signed-off-by:
Azat Khuzhin <a3at.mail@gmail.com> Signed-off-by:
-
Cong Wang authored
syzbot reported a use-after-free in tipc_group_fill_sock_diag(), where tipc_group_fill_sock_diag() still reads tsk->group meanwhile tipc_group_delete() just deletes it in tipc_release(). tipc_nl_sk_walk() aims to lock this sock when walking each sock in the hash table to close race conditions with sock changes like this one, by acquiring tsk->sk.sk_lock.slock spinlock, unfortunately this doesn't work at all. All non-BH call path should take lock_sock() instead to make it work. tipc_nl_sk_walk() brutally iterates with raw rht_for_each_entry_rcu() where RCU read lock is required, this is the reason why lock_sock() can't be taken on this path. This could be resolved by switching to rhashtable iterator API's, where taking a sleepable lock is possible. Also, the iterator API's are friendly for restartable calls like diag dump, the last position is remembered behind the scence, all we need to do here is saving the iterator into cb->args[]. I tested this with parallel tipc diag dump and thousands of tipc socket creation and release, no crash or memory leak. Reported-by: syzbot+b9c8f3ab2994b7cd1625@syzkaller.appspotmail.com Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Jerome Brunet authored
This reverts commit 4ae0169f. This change in the handling of the coalesce timer is causing regression on (at least) amlogic platforms. Network will break down very quickly (a few seconds) after starting a download. This can easily be reproduced using iperf3 for example. The problem has been reported on the S805, S905, S912 and A113 SoCs (Realtek and Micrel PHYs) and it is likely impacting all Amlogics platforms using Gbit ethernet No problem was seen with the platform using 10/100 only PHYs (GXL internal) Reverting change brings things back to normal and allows to use network again until we better understand the problem with the coalesce timer. Cc: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
-
Cong Wang authored
rhashtable_walk_exit() must be paired with rhashtable_walk_enter(). Fixes: 40f9f439 ("tipc: Fix tipc_sk_reinit race conditions") Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Alexey Kodanev authored
Before the commit d6990976 ("vti6: fix PMTU caching and reporting on xmit") '!skb->ignore_df' check was always true because the function skb_scrub_packet() was called before it, resetting ignore_df to zero. In the commit, skb_scrub_packet() was moved below, and now this check can be false for the packet, e.g. when sending it in the two fragments, this prevents successful PMTU updates in such case. The next attempts to send the packet lead to the same tx error. Moreover, vti6 initial MTU value relies on PMTU adjustments. This issue can be reproduced with the following LTP test script: udp_ipsec_vti.sh -6 -p ah -m tunnel -s 2000 Fixes: ccd740cb ("vti6: Add pmtu handling to vti6_xmit.") Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
- 29 Aug, 2018 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-08-29 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a build error in sk_reuseport_convert_ctx_access() when compiling with clang which cannot resolve hweight_long() at build time inside the BUILD_BUG_ON() assertion, from Stefan. 2) Several fixes for BPF sockmap, four of them in getting the bpf_msg_pull_data() helper to work, one use after free case in bpf_tcp_close() and one refcount leak in bpf_tcp_recvmsg(), from Daniel. 3) Another fix for BPF sockmap where we misaccount sk_mem_uncharge() in the socket redirect error case from unwinding scatterlist twice, from John. ==================== Signed-off-by: -
Alexei Starovoitov authored
Daniel Borkmann says: ==================== This set contains three more fixes for the bpf_msg_pull_data() mainly for correcting scatterlist ring wrap-arounds as well as fixing up data pointers. For details please see individual patches. Thanks! ==================== Signed-off-by:Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
When we perform the sg shift repair for the scatterlist ring, we currently start out at i = first_sg + 1. However, this is not correct since the first_sg could point to the sge sitting at slot MAX_SKB_FRAGS - 1, and a subsequent i = MAX_SKB_FRAGS will access the scatterlist ring (sg) out of bounds. Add the sk_msg_iter_var() helper for iterating through the ring, and apply the same rule for advancing to the next ring element as we do elsewhere. Later work will use this helper also in other places. Fixes: 015632bb ("bpf: sk_msg program helper bpf_sk_msg_pull_data") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
If first_sg and last_sg wraps around in the scatterlist ring, then we need to account for that in the shift as well. E.g. crafting such msgs where this is the case leads to a hang as shift becomes negative. E.g. consider the following scenario: first_sg := 14 |=> shift := -12 msg->sg_start := 10 last_sg := 3 | msg->sg_end := 5 round 1: i := 15, move_from := 3, sg[15] := sg[ 3] round 2: i := 0, move_from := -12, sg[ 0] := sg[-12] round 3: i := 1, move_from := -11, sg[ 1] := sg[-11] round 4: i := 2, move_from := -10, sg[ 2] := sg[-10] [...] round 13: i := 11, move_from := -1, sg[ 2] := sg[ -1] round 14: i := 12, move_from := 0, sg[ 2] := sg[ 0] round 15: i := 13, move_from := 1, sg[ 2] := sg[ 1] round 16: i := 14, move_from := 2, sg[ 2] := sg[ 2] round 17: i := 15, move_from := 3, sg[ 2] := sg[ 3] [...] This means we will loop forever and never hit the msg->sg_end condition to break out of the loop. When we see that the ring wraps around, then the shift should be MAX_SKB_FRAGS - first_sg + last_sg - 1. Meaning, the remainder slots from the tail of the ring and the head until last_sg combined. Fixes: 015632bb ("bpf: sk_msg program helper bpf_sk_msg_pull_data") Signed-off-by:
-
Daniel Borkmann authored
In the current code, msg->data is set as sg_virt(&sg[i]) + start - offset and msg->data_end relative to it as msg->data + bytes. Using iterator i to point to the updated starting scatterlist element holds true for some cases, however not for all where we'd end up pointing out of bounds. It is /correct/ for these ones: 1) When first finding the starting scatterlist element (sge) where we find that the page is already privately owned by the msg and where the requested bytes and headroom fit into the sge's length. However, it's /incorrect/ for the following ones: 2) After we made the requested area private and updated the newly allocated page into first_sg slot of the scatterlist ring; when we find that no shift repair of the ring is needed where we bail out updating msg->data and msg->data_end. At that point i will point to last_sg, which in this case is the next elem of first_sg in the ring. The sge at that point might as well be invalid (e.g. i == msg->sg_end), which we use for setting the range of sg_virt(&sg[i]). The correct one would have been first_sg. 3) Similar as in 2) but when we find that a shift repair of the ring is needed. In this case we fix up all sges and stop once we've reached the end. In this case i will point to will point to the new msg->sg_end, and the sge at that point will be invalid. Again here the requested range sits in first_sg. Fixes: 015632bb ("bpf: sk_msg program helper bpf_sk_msg_pull_data") Signed-off-by:
-
Daniel Borkmann authored
While recently going over bpf_msg_pull_data(), I noticed three issues which are fixed in here: 1) When we attempt to find the first scatterlist element (sge) for the start offset, we add len to the offset before we check for start < offset + len, whereas it should come after when we iterate to the next sge to accumulate the offsets. For example, given a start offset of 12 with a sge length of 8 for the first sge in the list would lead us to determine this sge as the first sge thinking it covers first 16 bytes where start is located, whereas start sits in subsequent sges so we would end up pulling in the wrong data. 2) After figuring out the starting sge, we have a short-cut test in !msg->sg_copy[i] && bytes <= len. This checks whether it's not needed to make the page at the sge private where we can just exit by updating msg->data and msg->data_end. However, the length test is not fully correct. bytes <= len checks whether the requested bytes (end - start offsets) fit into the sge's length. The part that is missing is that start must not be sge length aligned. Meaning, the start offset into the sge needs to be accounted as well on top of the requested bytes as otherwise we can access the sge out of bounds. For example the sge could have length of 8, our requested bytes could have length of 8, but at a start offset of 4, so we also would need to pull in 4 bytes of the next sge, when we jump to the out label we do set msg->data to sg_virt(&sg[i]) + start - offset and msg->data_end to msg->data + bytes which would be oob. 3) The subsequent bytes < copy test for finding the last sge has the same issue as in point 2) but also it tests for less than rather than less or equal to. Meaning if the sge length is of 8 and requested bytes of 8 while having the start aligned with the sge, we would unnecessarily go and pull in the next sge as well to make it private. Fixes: 015632bb ("bpf: sk_msg program helper bpf_sk_msg_pull_data") Signed-off-by:
-
- 28 Aug, 2018 4 commits
-
-
John Fastabend authored
Currently, when a redirect occurs in sockmap and an error occurs in the redirect call we unwind the scatterlist once in the error path of bpf_tcp_sendmsg_do_redirect() and then again in sendmsg(). Then in the error path of sendmsg we decrement the copied count by the send size. However, its possible we partially sent data before the error was generated. This can happen if do_tcp_sendpages() partially sends the scatterlist before encountering a memory pressure error. If this happens we need to decrement the copied value (the value tracking how many bytes were actually sent to TCP stack) by the number of remaining bytes _not_ the entire send size. Otherwise we risk confusing userspace. Also we don't need two calls to free the scatterlist one is good enough. So remove the one in bpf_tcp_sendmsg_do_redirect() and then properly reduce copied by the number of remaining bytes which may in fact be the entire send size if no bytes were sent. To do this use bool to indicate if free_start_sg() should do mem accounting or not. Signed-off-by:
-
Stefan Agner authored
Building the newly introduced BPF_PROG_TYPE_SK_REUSEPORT leads to a compile time error when building with clang: net/core/filter.o: In function `sk_reuseport_convert_ctx_access': ../net/core/filter.c:7284: undefined reference to `__compiletime_assert_7284' It seems that clang has issues resolving hweight_long at compile time. Since SK_FL_PROTO_MASK is a constant, we can use the interface for known constant arguments which works fine with clang. Fixes: 2dbb9b9e ("bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT") Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Daniel Borkmann authored
In bpf_tcp_recvmsg() we first took a reference on the psock, however once we find that there are skbs in the normal socket's receive queue we return with processing them through tcp_recvmsg(). Problem is that we leak the taken reference on the psock in that path. Given we don't really do anything with the psock at this point, move the skb_queue_empty() test before we fetch the psock to fix this case. Fixes: 8934ce2f ("bpf: sockmap redirect ingress support") Signed-off-by:
-
Daniel Borkmann authored
bpf_tcp_close() we pop the psock linkage to a map via psock_map_pop(). A parallel update on the sock hash map can happen between psock_map_pop() and lookup_elem_raw() where we override the element under link->hash / link->key. In bpf_tcp_close()'s lookup_elem_raw() we subsequently only test whether an element is present, but we do not test whether the element is infact the element we were looking for. We lock the sock in bpf_tcp_close() during that time, so do we hold the lock in sock_hash_update_elem(). However, the latter locks the sock which is newly updated, not the one we're purging from the hash table. This means that while one CPU is doing the lookup from bpf_tcp_close(), another CPU is doing the map update in parallel, dropped our sock from the hlist and released the psock. Subsequently the first CPU will find the new sock and attempts to drop and release the old sock yet another time. Fix is that we need to check the elements for a match after lookup, similar as we do in the sock map. Note that the hash tab elems are freed via RCU, so access to their link->hash / link->key is fine since we're under RCU read side there. Fixes: e9db4ef6 ("bpf: sockhash fix omitted bucket lock in sock_close") Signed-off-by:
-
- 27 Aug, 2018 11 commits
-
-
Zhu Yanjun authored
In IPv4, the newly introduced rdma_read_gids is used to read the SGID/DGID for the connection which returns GID correctly for RoCE transport as well. In IPv6, rdma_read_gids is also used. The following are why rdma_read_gids is introduced. rdma_addr_get_dgid() for RoCE for client side connections returns MAC address, instead of DGID. rdma_addr_get_sgid() for RoCE doesn't return correct SGID for IPv6 and when more than one IP address is assigned to the netdevice. So the transport agnostic rdma_read_gids() API is provided by rdma_cm module. Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Linus Walleij authored
Commit 52638f71 ("dsa: Move gpio reset into switch driver") moved the GPIO handling into the switch drivers but forgot to remove the GPIO header includes. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Haiqing Bai authored
In function tipc_dest_push, the 32bit variables 'node' and 'port' are stored separately in uppper and lower part of 64bit 'value'. Then this value is assigned to dst->value which is a union like: union { struct { u32 port; u32 node; }; u64 value; } This works on little-endian machines like x86 but fails on big-endian machines. The fix remove the 'value' stack parameter and even the 'value' member of the union in tipc_dest, assign the 'node' and 'port' member directly with the input parameter to avoid the endian issue. Fixes: a80ae530 ("tipc: improve destination linked list") Signed-off-by:Zhenbo Gao <zhenbo.gao@windriver.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Haiqing Bai <Haiqing.Bai@windriver.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== net: sched: couple of small fixes Jiri Pirko (2): net: sched: fix extack error message when chain is failed to be created net: sched: return -ENOENT when trying to remove filter from non-existent chain ==================== Acked-by: -
Jiri Pirko authored
When chain 0 was implicitly created, removal of non-existent filter from chain 0 gave -ENOENT. Once chain 0 became non-implicit, the same call is giving -EINVAL. Fix this by returning -ENOENT in that case. Reported-by:
Roman Mashak <mrv@mojatatu.com> Fixes: f71e0ca4 ("net: sched: Avoid implicit chain 0 creation") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
Instead "Cannot find" say "Cannot create". Fixes: c35a4acc ("net: sched: cls_api: handle generic cls errors") Signed-off-by:
-
Xin Long authored
After erspan_ver is introudced, if erspan_ver is not set in iproute, its value will be left 0 by default. Since Commit 02f99df1 ("erspan: fix invalid erspan version."), it has broken the traffic due to the version check in erspan_xmit if users are not aware of 'erspan_ver' param, like using an old version of iproute. To fix this compatibility problem, it sets erspan_ver to 1 by default when adding an erspan dev in erspan_setup. Note that we can't do it in ipgre_netlink_parms, as this function is also used by ipgre_changelink. Fixes: 02f99df1 ("erspan: fix invalid erspan version.") Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
-
Xin Long authored
After changing rhashtable_walk_start to return void, start_fail would never be set other value than 0, and the checking for start_fail is pointless, so remove it. Fixes: 97a6ec4a ("rhashtable: Change rhashtable_walk_start to return void") Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Xin Long authored
As Marcelo noticed, in sctp_transport_get_next, it is iterating over transports but then also accessing the association directly, without checking any refcnts before that, which can cause an use-after-free Read. So fix it by holding transport before accessing the association. With that, sctp_transport_hold calls can be removed in the later places. Fixes: 626d16f5 ("sctp: export some apis or variables for sctp_diag and reuse some for proc") Reported-by: syzbot+fe62a0c9aa6a85c6de16@syzkaller.appspotmail.com Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) ICE, E1000, IGB, IXGBE, and I40E bug fixes from the Intel folks. 2) Better fix for AB-BA deadlock in packet scheduler code, from Cong Wang. 3) bpf sockmap fixes (zero sized key handling, etc.) from Daniel Borkmann. 4) Send zero IPID in TCP resets and SYN-RECV state ACKs, to prevent attackers using it as a side-channel. From Eric Dumazet. 5) Memory leak in mediatek bluetooth driver, from Gustavo A. R. Silva. 6) Hook up rt->dst.input of ipv6 anycast routes properly, from Hangbin Liu. 7) hns and hns3 bug fixes from Huazhong Tan. 8) Fix RIF leak in mlxsw driver, from Ido Schimmel. 9) iova range check fix in vhost, from Jason Wang. 10) Fix hang in do_tcp_sendpages() with tls, from John Fastabend. 11) More r8152 chips need to disable RX aggregation, from Kai-Heng Feng. 12) Memory exposure in TCA_U32_SEL handling, from Kees Cook. 13) TCP BBR congestion control fixes from Kevin Yang. 14) hv_netvsc, ignore non-PCI devices, from Stephen Hemminger. 15) qed driver fixes from Tomer Tayar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits) net: sched: Fix memory exposure from short TCA_U32_SEL qed: fix spelling mistake "comparsion" -> "comparison" vhost: correctly check the iova range when waking virtqueue qlge: Fix netdev features configuration. net: macb: do not disable MDIO bus at open/close time Revert "net: stmmac: fix build failure due to missing COMMON_CLK dependency" net: macb: Fix regression breaking non-MDIO fixed-link PHYs mlxsw: spectrum_switchdev: Do not leak RIFs when removing bridge i40e: fix condition of WARN_ONCE for stat strings i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled ixgbe: fix driver behaviour after issuing VFLR ixgbe: Prevent unsupported configurations with XDP ixgbe: Replace GFP_ATOMIC with GFP_KERNEL igb: Replace mdelay() with msleep() in igb_integrated_phy_loopback() igb: Replace GFP_ATOMIC with GFP_KERNEL in igb_sw_init() igb: Use an advanced ctx descriptor for launchtime e1000: ensure to free old tx/rx rings in set_ringparam() e1000: check on netif_running() before calling e1000_up() ixgb: use dma_zalloc_coherent instead of allocator/memset ice: Trivial formatting fixes ... -
Jens Axboe authored
The email was botched in one entry, and I also forgot to update the location of the git tree. It'll be under the linux-block umbrella, just with different branches. Reported-by:
Baruch Siach <baruch@tkos.co.il> Fixes: 7634ccd2 ("libata: maintainership update") Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 26 Aug, 2018 3 commits
-
-
Kees Cook authored
Via u32_change(), TCA_U32_SEL has an unspecified type in the netlink policy, so max length isn't enforced, only minimum. This means nkeys (from userspace) was being trusted without checking the actual size of nla_len(), which could lead to a memory over-read, and ultimately an exposure via a call to u32_dump(). Reachability is CAP_NET_ADMIN within a namespace. Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer update from Thomas Gleixner: "New defines for the compat time* types so they can be shared between 32bit and 64bit builds. Not used yet, but merging them now allows the actual conversions to be merged through different maintainer trees without dependencies We still have compat interfaces for 32bit on 64bit even with the new 2038 safe timespec/val variants because pointer size is different. And for the old style timespec/val interfaces we need yet another 'compat' interface for both 32bit native and 32bit on 64bit" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: y2038: Provide aliases for compat helpers
-
