- 02 Oct, 2016 5 commits
-
-
Pawel Moll authored
[ Upstream commit b928466b ] The code setting XP watchpoint comparator and mask registers should, in order to be fully compliant with specification, zero one or more most significant bits of each field. In both L cases it means zeroing bit 63. The bitmask doing this was wrong, though, zeroing bit 60 instead. Fortunately, due to a lucky coincidence, this turned out to be fairly innocent with the existing hardware. Fixed now. Cc: stable@vger.kernel.org # 3.17+ Signed-off-by:
Pawel Moll <pawel.moll@arm.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com>
-
Pawel Moll authored
[ Upstream commit b7c1beb2 ] Fuzzing the CCN perf driver revealed a small but definitely dangerous mistake in the event setup code. When a cycle counter is requested, the driver should not reconfigure the events bus at all, otherwise it will corrupt (in most but the simplest cases) its configuration and may end up accessing XP array out of its bounds and corrupting control registers. Reported-by:
Mark Rutland <mark.rutland@arm.com> Reviewed-by:
-
Tyrel Datwyler authored
[ Upstream commit a87eeb90 ] Commit 655ee63c ("scsi constants: command, sense key + additional sense string") added a "Completed" sense string with key 0xF to snstext[], but failed to updated the upper bounds check of the sense key in scsi_sense_key_string(). Fixes: 655ee63c ("[SCSI] scsi constants: command, sense key + additional sense strings") Cc: <stable@vger.kernel.org> # v3.12+ Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Reviewed-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit 4d0bd46a ] This reverts commit 3d5fdff4. Ben Hutchings pointed out that the commit isn't safe since it assumes that the structure used by the driver is iw_point, when in fact there's no way to know about that. Fortunately, the only driver in the tree that ever runs this code path is the wilc1000 staging driver, so it doesn't really matter. Clearly I should have investigated this better before applying, sorry. Reported-by:
Ben Hutchings <ben@decadent.org.uk> Cc: stable@vger.kernel.org [though I guess it doesn't matter much] Fixes: 3d5fdff4 ("wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Sebastian Reichel authored
[ Upstream commit b46211d6 ] Add missing sysconfig/sysstatus information to OMAP3 hwmod. The information has been checked against OMAP34xx and OMAP36xx TRM. Without this change DSI block is not reset during boot, which is required for working Nokia N950 display. Signed-off-by:
Sebastian Reichel <sre@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
- 18 Sep, 2016 1 commit
-
-
James Hogan authored
commit ba913e4f upstream. When mapping a page into the guest we error check using is_error_pfn(), however this doesn't detect a value of KVM_PFN_NOSLOT, indicating an error HVA for the page. This can only happen on MIPS right now due to unusual memslot management (e.g. being moved / removed / resized), or with an Enhanced Virtual Memory (EVA) configuration where the default KVM_HVA_ERR_* and kvm_is_error_hva() definitions are unsuitable (fixed in a later patch). This case will be treated as a pfn of zero, mapping the first page of physical memory into the guest. It would appear the MIPS KVM port wasn't updated prior to being merged (in v3.10) to take commit 81c52c56 ("KVM: do not treat noslot pfn as a error pfn") into account (merged v3.8), which converted a bunch of is_error_pfn() calls to is_error_noslot_pfn(). Switch to using is_error_noslot_pfn() instead to catch this case properly. Fixes: 858dd5d4 ("KVM/MIPS32: MMU/TLB operations for the Guest.") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [james.hogan@imgtec.com: Backport to v4.7.y] Signed-off-by:
-
- 17 Sep, 2016 1 commit
-
-
Sasha Levin authored
Signed-off-by:
-
- 15 Sep, 2016 15 commits
-
-
Sasha Levin authored
This reverts commit 93c0b008. Signed-off-by:
-
Emanuel Czirai authored
[ Upstream commit d1992996 ] AMD F12h machines have an erratum which can cause DIV/IDIV to behave unpredictably. The workaround is to set MSRC001_1029[31] but sometimes there is no BIOS update containing that workaround so let's do it ourselves unconditionally. It is simple enough. [ Borislav: Wrote commit message. ] Signed-off-by:
Emanuel Czirai <icanrealizeum@gmail.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Yaowu Xu <yaowu@google.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160902053550.18097-1-bp@alien8.deSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Steven Rostedt authored
[ Upstream commit 15301a57 ] Łukasz Daniluk reported that on a RHEL kernel that his machine would lock up after enabling function tracer. I asked him to bisect the functions within available_filter_functions, which he did and it came down to three: _paravirt_nop(), _paravirt_ident_32() and _paravirt_ident_64() It was found that this is only an issue when noreplace-paravirt is added to the kernel command line. This means that those functions are most likely called within critical sections of the funtion tracer, and must not be traced. In newer kenels _paravirt_nop() is defined within gcc asm(), and is no longer an issue. But both _paravirt_ident_{32,64}() causes the following splat when they are traced: mm/pgtable-generic.c:33: bad pmd ffff8800d2435150(0000000001d00054) mm/pgtable-generic.c:33: bad pmd ffff8800d3624190(0000000001d00070) mm/pgtable-generic.c:33: bad pmd ffff8800d36a5110(0000000001d00054) mm/pgtable-generic.c:33: bad pmd ffff880118eb1450(0000000001d00054) NMI watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [systemd-journal:469] Modules linked in: e1000e CPU: 2 PID: 469 Comm: systemd-journal Not tainted 4.6.0-rc4-test+ #513 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012 task: ffff880118f740c0 ti: ffff8800d4aec000 task.ti: ffff8800d4aec000 RIP: 0010:[<ffffffff81134148>] [<ffffffff81134148>] queued_spin_lock_slowpath+0x118/0x1a0 RSP: 0018:ffff8800d4aefb90 EFLAGS: 00000246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88011eb16d40 RDX: ffffffff82485760 RSI: 000000001f288820 RDI: ffffea0000008030 RBP: ffff8800d4aefb90 R08: 00000000000c0000 R09: 0000000000000000 R10: ffffffff821c8e0e R11: 0000000000000000 R12: ffff880000200fb8 R13: 00007f7a4e3f7000 R14: ffffea000303f600 R15: ffff8800d4b562e0 FS: 00007f7a4e3d7840(0000) GS:ffff88011eb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7a4e3f7000 CR3: 00000000d3e71000 CR4: 00000000001406e0 Call Trace: _raw_spin_lock+0x27/0x30 handle_pte_fault+0x13db/0x16b0 handle_mm_fault+0x312/0x670 __do_page_fault+0x1b1/0x4e0 do_page_fault+0x22/0x30 page_fault+0x28/0x30 __vfs_read+0x28/0xe0 vfs_read+0x86/0x130 SyS_read+0x46/0xa0 entry_SYSCALL_64_fastpath+0x1e/0xa8 Code: 12 48 c1 ea 0c 83 e8 01 83 e2 30 48 98 48 81 c2 40 6d 01 00 48 03 14 c5 80 6a 5d 82 48 89 0a 8b 41 08 85 c0 75 09 f3 90 8b 41 08 <85> c0 74 f7 4c 8b 09 4d 85 c9 74 08 41 0f 18 09 eb 02 f3 90 8b Reported-by:
Łukasz Daniluk <lukasz.daniluk@intel.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Miklos Szeredi authored
[ Upstream commit 7cb35119 ] Be defensive about what underlying fs provides us in the returned xattr list buffer. If it's not properly null terminated, bail out with a warning insead of BUG. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Miklos Szeredi authored
[ Upstream commit c11b9fdd ] Clear out posix acl xattrs on workdir and also reset the mode after creation so that an inherited sgid bit is cleared. Signed-off-by:
-
Jimi Damon authored
[ Upstream commit c8d19242 ] Added devices ids for acces i/o products quad and octal serial cards that make use of existing Pericom PI7C9X7954 and PI7C9X7958 configurations . Signed-off-by:
Jimi Damon <jdamon@accesio.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 17d0774f ] Attributes declared with __ATTR_PREALLOC use sysfs_kf_read() which returns zero bytes for non-zero offset. This breaks script checkarray in mdadm tool in debian where /bin/sh is 'dash' because its builtin 'read' reads only one byte at a time. Script gets 'i' instead of 'idle' when reads current action from /sys/block/$dev/md/sync_action and as a result does nothing. This patch adds trivial implementation of partial read: generate whole string and move required part into buffer head. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 4ef67a8c ("sysfs/kernfs: make read requests on pre-alloc files use the buffer.") Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=787950 Cc: Stable <stable@vger.kernel.org> # v3.19+ Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
NeilBrown authored
[ Upstream commit 65da3484 ] attributes declared with __ATTR_PREALLOC use sysfs_kf_read() which ignores the 'count' arg. So a 1-byte read request can return more bytes than that. This is seen with the 'dash' shell when 'read' is used on some 'md' sysfs attributes. So only return the 'min' of count and the attribute length. Signed-off-by:
NeilBrown <neilb@suse.com> Acked-by:
-
Tejun Heo authored
[ Upstream commit df6a58c5 ] kernfs_notify_workfn() sends out file modified events for the scheduled kernfs_nodes. Because the modifications aren't from userland, it doesn't have the matching file struct at hand and can't use fsnotify_modify(). Instead, it looked up the inode and then used d_find_any_alias() to find the dentry and used fsnotify_parent() and fsnotify() directly to generate notifications. The assumption was that the relevant dentries would have been pinned if there are listeners, which isn't true as inotify doesn't pin dentries at all and watching the parent doesn't pin the child dentries even for dnotify. This led to, for example, inotify watchers not getting notifications if the system is under memory pressure and the matching dentries got reclaimed. It can also be triggered through /proc/sys/vm/drop_caches or a remount attempt which involves shrinking dcache. fsnotify_parent() only uses the dentry to access the parent inode, which kernfs can do easily. Update kernfs_notify_workfn() so that it uses fsnotify() directly for both the parent and target inodes without going through d_find_any_alias(). While at it, supply the target file name to fsnotify() from kernfs_node->name. Signed-off-by:
Evgeny Vereshchagin <evvers@ya.ru> Fixes: d911d987 ("kernfs: make kernfs_notify() trigger inotify events too") Cc: John McCutchan <john@johnmccutchan.com> Cc: Robert Love <rlove@rlove.org> Cc: Eric Paris <eparis@parisplace.org> Cc: stable@vger.kernel.org # v3.16+ Signed-off-by:
-
Eric Biggers authored
[ Upstream commit 5d0be84e ] If crypt_alloc_tfms() had to allocate multiple tfms and it failed before the last allocation, then it would call crypt_free_tfms() and could free pointers from uninitialized memory -- due to the crypt_free_tfms() check for non-zero cc->tfms[i]. Fix by allocating zeroed memory. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Mikulas Patocka authored
[ Upstream commit 4e870e94 ] When dm-crypt processes writes, it allocates a new bio in crypt_alloc_buffer(). The bio is allocated from a bio set and it can have at most BIO_MAX_PAGES vector entries, however the incoming bio can be larger (e.g. if it was allocated by bcache). If the incoming bio is larger, bio_alloc_bioset() fails and an error is returned. To avoid the error, we test for a too large bio in the function crypt_map() and use dm_accept_partial_bio() to split the bio. dm_accept_partial_bio() trims the current bio to the desired size and asks DM core to send another bio with the rest of the data. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Vladimir Zapolskiy authored
[ Upstream commit 91e630d9 ] The kthread_run() function returns either a valid task_struct or ERR_PTR() value, check for NULL is invalid. This change fixes potential for oops, e.g. in OOM situation. Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Mikulas Patocka authored
[ Upstream commit 7efb3673 ] bio_alloc() can allocate a bio with at most BIO_MAX_PAGES (256) vector entries. However, the incoming bio may have more vector entries if it was allocated by other means. For example, bcache submits bios with more than BIO_MAX_PAGES entries. This results in bio_alloc() failure. To avoid the failure, change the code so that it allocates bio with at most BIO_MAX_PAGES entries. If the incoming bio has more entries, bio_add_page() will fail and a new bio will be allocated - the code that handles bio_add_page() failure already exists in the dm-log-writes target. Signed-off-by:
Josef Bacik <jbacik@fb,com> Signed-off-by:
-
Mikulas Patocka authored
[ Upstream commit a5d60783 ] Move log_one_block()'s atomic_inc(&lc->io_blocks) before bio_alloc() to fix a bug that the target hangs if bio_alloc() fails. The error path does put_io_block(lc), so atomic_inc(&lc->io_blocks) must occur before invoking the error path to avoid underflow of lc->io_blocks. Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 98b0f80c ] On error, the callers expect us to return without bumping nn->cb_users[]. Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Cc: stable@vger.kernel.org # v3.7+ Signed-off-by:
-
- 12 Sep, 2016 17 commits
-
-
Brian Foster authored
[ Upstream commit 800b2694 ] xfs_wait_buftarg() waits for all pending I/O, drains the ioend completion workqueue and walks the LRU until all buffers in the cache have been released. This is traditionally an unmount operation` but the mechanism is also reused during filesystem freeze. xfs_wait_buftarg() invokes drain_workqueue() as part of the quiesce, which is intended more for a shutdown sequence in that it indicates to the queue that new operations are not expected once the drain has begun. New work jobs after this point result in a WARN_ON_ONCE() and are otherwise dropped. With filesystem freeze, however, read operations are allowed and can proceed during or after the workqueue drain. If such a read occurs during the drain sequence, the workqueue infrastructure complains about the queued ioend completion work item and drops it on the floor. As a result, the buffer remains on the LRU and the freeze never completes. Despite the fact that the overall buffer cache cleanup is not necessary during freeze, fix up this operation such that it is safe to invoke during non-unmount quiesce operations. Replace the drain_workqueue() call with flush_workqueue(), which runs a similar serialization on pending workqueue jobs without causing new jobs to be dropped. This is safe for unmount as unmount independently locks out new operations by the time xfs_wait_buftarg() is invoked. cc: <stable@vger.kernel.org> Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Dave Chinner authored
[ Upstream commit f3d7ebde ] From inspection, the superblock sb_inprogress check is done in the verifier and triggered only for the primary superblock via a "bp->b_bn == XFS_SB_DADDR" check. Unfortunately, the primary superblock is an uncached buffer, and hence it is configured by xfs_buf_read_uncached() with: bp->b_bn = XFS_BUF_DADDR_NULL; /* always null for uncached buffers */ And so this check never triggers. Fix it. cc: <stable@vger.kernel.org> Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
-
Aleksandr Makarov authored
[ Upstream commit 40d9c325 ] These product IDs are listed in Windows driver. 0x6803 corresponds to WeTelecom WM-D300. 0x6802 name is unknown. Signed-off-by:
Aleksandr Makarov <aleksandr.o.makarov@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Alan Stern authored
[ Upstream commit 53e5f36f ] UBSAN complains about a left shift by -1 in proc_do_submiturb(). This can occur when an URB is submitted for a bulk or control endpoint on a high-speed device, since the code doesn't bother to check the endpoint type; normally only interrupt or isochronous endpoints have a nonzero bInterval value. Aside from the fact that the operation is illegal, it shouldn't matter because the result isn't used. Still, in theory it could cause a hardware exception or other problem, so we should work around it. This patch avoids doing the left shift unless the shift amount is >= 0. The same piece of code has another problem. When checking the device speed (the exponential encoding for interrupt endpoints is used only by high-speed or faster devices), we need to look for speed >= USB_SPEED_SUPER as well as speed == USB_SPEED HIGH. The patch adds this check. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Vittorio Zecca <zeccav@gmail.com> Tested-by:
Bjørn Mork <bjorn@mork.no> CC: <stable@vger.kernel.org> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit b88fa69e ] Ensure that the client conforms to the normative behaviour described in RFC5661 Section 12.7.2: "If a client believes its lease has expired, it MUST NOT send I/O to the storage device until it has validated its lease." So ensure that we wait for the lease to be validated before using the layout. Signed-off-by:
-
Linus Walleij authored
[ Upstream commit 7ac61a06 ] Any readings from the raw interface of the KXSD9 driver will return an empty string, because it does not return IIO_VAL_INT but rather some random value from the accelerometer to the caller. Cc: stable@vger.kernel.org Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Ian Abbott authored
[ Upstream commit f0f4b0cc ] Commit ebb657ba ("staging: comedi: ni_mio_common: clarify the cmd->start_arg validation and use") introduced a backwards compatibility issue in the use of asynchronous commands on the AO subdevice when `start_src` is `TRIG_EXT`. Valid values for `start_src` are `TRIG_INT` (for internal, software trigger), and `TRIG_EXT` (for external trigger). When set to `TRIG_EXT`. In both cases, the driver relies on an internal, software trigger to set things up (allowing the user application to write sufficient samples to the data buffer before the trigger), so it acts as a software "pre-trigger" in the `TRIG_EXT` case. The software trigger is handled by `ni_ao_inttrig()`. Prior to the above change, when `start_src` was `TRIG_INT`, `start_arg` was required to be 0, and `ni_ao_inttrig()` checked that the software trigger number was also 0. After the above change, when `start_src` was `TRIG_INT`, any value was allowed for `start_arg`, and `ni_ao_inttrig()` checked that the software trigger number matched this `start_arg` value. The backwards compatibility issue is that the internal trigger number now has to match `start_arg` when `start_src` is `TRIG_EXT` when it previously had to be 0. Fix the backwards compatibility issue in `ni_ao_inttrig()` by always allowing software trigger number 0 when `start_src` is something other than `TRIG_INT`. Thanks to Spencer Olson for reporting the issue. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Reported-by:
Spencer Olson <olsonse@umich.edu> Fixes: ebb657ba ("staging: comedi: ni_mio_common: clarify the cmd->start_arg validation and use") Cc: stable <stable@vger.kernel.org> Reviewed-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
Ian Abbott authored
[ Upstream commit 5ca05345 ] For counter subdevices, the `s->insn_write` handler is being set to the wrong function, `ni_tio_insn_read()`. It should be `ni_tio_insn_write()`. Signed-off-by:
Éric Piel <piel@delmic.com> Fixes: 10f74377 ("staging: comedi: ni_tio: make ni_tio_winsn() a proper comedi (*insn_write)" Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by:
-
Ian Abbott authored
[ Upstream commit 80e162ee ] `daqboard2000_find_boardinfo()` is supposed to check if the DaqBoard/2000 series model is supported, based on the PCI subvendor and subdevice ID. The current code is wrong as it is comparing the PCI device's subdevice ID to an expected, fixed value for the subvendor ID. It should be comparing the PCI device's subvendor ID to this fixed value. Correct it. Fixes: 7e8401b2 ("staging: comedi: daqboard2000: add back subsystem_device check") Signed-off-by:
-
Aleksandr Makarov authored
[ Upstream commit 6695593e ] Add support for WeTelecom WM-D200. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22de ProdID=6801 Rev=00.00 S: Manufacturer=WeTelecom Incorporated S: Product=WeTelecom Mobile Products C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Signed-off-by:
-
Li Jun authored
[ Upstream commit c4e94174 ] When the controller is configured to be dual role and it's in host mode, if bind udc and gadgt driver, those gadget operations will do gadget disconnect and finally pull down DP line, which will break host function. Cc: <stable@vger.kernel.org> # 4.1+ Signed-off-by:
Li Jun <jun.li@nxp.com> Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit 3b7c7e52 ] There is an allocation with GFP_KERNEL flag in mos7840_write(), while it may be called from interrupt context. Follow-up for commit 19125283 ("USB: kobil_sct: fix non-atomic allocation in write path") Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit 5a5a1d61 ] There is an allocation with GFP_KERNEL flag in mos7720_write(), while it may be called from interrupt context. Follow-up for commit 19125283 ("USB: kobil_sct: fix non-atomic allocation in write path") Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Zefan Li authored
[ Upstream commit 06f4e948 ] A new task inherits cpus_allowed and mems_allowed masks from its parent, but if someone changes cpuset's config by writing to cpuset.cpus/cpuset.mems before this new task is inserted into the cgroup's task list, the new task won't be updated accordingly. Signed-off-by:
Zefan Li <lizefan@huawei.com> Signed-off-by:
-
Miklos Szeredi authored
[ Upstream commit 0956254a ] When a copy up of a directory occurs which has the opaque xattr set, the xattr remains in the upper directory. The immediate behavior with overlayfs is that the upper directory is not treated as opaque, however after a remount the opaque flag is used and upper directory is treated as opaque. This causes files created in the lower layer to be hidden when using multiple lower directories. Fix by not copying up the opaque flag. To reproduce: ----8<---------8<---------8<---------8<---------8<---------8<---- mkdir -p l/d/s u v w mnt mount -t overlay overlay -olowerdir=l,upperdir=u,workdir=w mnt rm -rf mnt/d/ mkdir -p mnt/d/n umount mnt mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt touch mnt/d/foo umount mnt mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt ls mnt/d ----8<---------8<---------8<---------8<---------8<---------8<---- output should be: "foo n" Reported-by:
Derek McGowan <dmcg@drizz.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=151291Signed-off-by:
-
Yoshihiro Shimoda authored
[ Upstream commit 626d2f07 ] The USB-DMAC's interruption happens even if the CHCR.DE is not set to 1 because CHCR.NULLE is set to 1. So, this driver should call usb_dmac_isr_transfer_end() if the DE bit is set to 1 only. Otherwise, the desc is possible to be NULL in the usb_dmac_isr_transfer_end(). Fixes: 0c1c8ff3 ("dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver) Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Theodore Ts'o authored
[ Upstream commit 829fa70d ] A number of fuzzing failures seem to be caused by allocation bitmaps or other metadata blocks being pointed at the superblock. This can cause kernel BUG or WARNings once the superblock is overwritten, so validate the group descriptor blocks to make sure this doesn't happen. Cc: stable@vger.kernel.org Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
- 11 Sep, 2016 1 commit
-
-
Al Viro authored
[ Upstream commit 76cc404b ] Cc: stable@vger.kernel.org # 3.15+ Reviewed-by:
Jeff Layton <jeff.layton@primarydata.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
