Luiz Angelo Daros de Luca says:

====================
net: dsa: realtek: add rtl8_4t tag

This patch series adds support for rtl8_4t tag. It is a variant of
rtl8_4 tag, with identical values but placed at the end of the packet
(before CRC).

It forces checksum in software before adding the tag as those extra
bytes at the end of the packet would be summed together with the rest of
the payload. When the switch removes the tag before sending the packet
to the network, that checksum will not match.

It might be useful to diagnose or avoid checksum offload issues. With an
ethertype tag like rtl8_4, the cpu port ethernet driver must work with
cksum_start and chksum_offset to correctly calculate checksums. If not,
the checksum field will be broken (it will contain the fake ip header
sum).  In those cases, using 'rtl8_4t' might be an alternative way to
avoid checksum offload, either using runtime or device-tree property.

Regards,

Luiz

v4-v5)
- tags in alphabetical order in dsa_port.yaml
- remove ret var from rtl8365mb_change_tag_protocol
- Comment typos fixes

v3-v4)
- added rtl8_4 and rtl8_4t to dsa_port.yaml
- removed generic considerations about checksum problems with DSA tags.
  They belong to Documentation/networking/dsa/dsa.rst

v2-v3)
- updated tag documentation (file header)
- do not remove position and format from rtl8365mb_cpu
- reinstate cpu to rtl8365mb
- moved rtl8365mb_change_tag_protocol after rtl8365mb_cpu_config
- do not modify rtl8365mb_cpu_config() logic
- remove cpu arg from rtl8365mb_cpu_config(); get it from priv
- dropped tag_protocol from rtl8365mb. It is now derived from
  cpu->position.
- init cpu struct before dsa_register as default tag must be already
  defined before dsa_register()
- fix formatting issues

v1-v2)
- remove mention to tail tagger, use trailing tagger.
- use void* instead of char* for pointing to tag beginning
- use memcpy to avoid problems with unaligned tags
- calculate checksum if it still pending
- keep in-use tag protocol in memory instead of reading from switch
  register
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The trailing tag is also supported by this family. The default is still
rtl8_4 but now the switch supports changing the tag to rtl8_4t.

Reintroduce the dropped cpu in struct rtl8365mb (removed by 6147631c).
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Realtek switches supports the same tag both before ethertype or between
payload and the CRC.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Realtek rtl8365mb DSA driver can use these two tag formats.

Cc: devicetree@vger.kernel.org
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: Selftest refinements and a new test

Patches 1 and 11 improve the printed output of the mptcp_join.sh
selftest.

Patches 2-8 add a test for the MP_FASTCLOSE option, including
prerequisite changes like additional MPTCP MIBs.

Patches 9-10 add some groundwork for upcoming tests.
====================

Link: https://lore.kernel.org/r/20220304193636.219315-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch updated the output info of chk_rm_nr. Renamed 'sf' to 'rmsf',
which means 'remove subflow'. Added the display of whether the inverted
namespaces has been used to check the mib counters.

The new output looks like this:

 002 remove multiple subflows          syn[ ok ] - synack[ ok ] - ack[ ok ]
                                       rm [ ok ] - rmsf  [ ok ]
 003 remove single address             syn[ ok ] - synack[ ok ] - ack[ ok ]
                                       add[ ok ] - echo  [ ok ]
                                       rm [ ok ] - rmsf  [ ok ]   invert
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch added five more arguments for chk_join_nr(). The default
values of them are all zero.

The first two, csum_ns1 and csum_ns1, are passed to chk_csum_nr(), to
check the mib counters of the checksum errors in ns1 and ns2. A '+'
can be added into this two arguments to represent that multiple
checksum errors are allowed when doing this check. For example,

        chk_csum_nr "" +2 +2

indicates that two or more checksum errors are allowed in both ns1 and
ns2.

The remaining two, fail_nr and rst_nr, are passed to chk_fail_nr() and
chk_rst_nr() respectively, to check the sending and receiving mib
counters of MP_FAIL and MP_RST.

Also did some cleanups in chk_fail_nr(), renamed two local variables
and updated the output message.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch added the invert bytes check for the output data in
check_transfer().

Instead of the file mismatch error:

  [ FAIL ] file received by server does not match (in, out):
  -rw------- 1 root root 45643832 Jan 16 15:04 /tmp/tmp.9xpM6Paivv
  Trailing bytes are:
  MPTCP_TEST_FILE_END_MARKER
  -rw------- 1 root root 45643832 Jan 16 15:04 /tmp/tmp.wnz1Yp4u7Z
  Trailing bytes are:
  MPTCP_TEST_FILE_END_MARKER

Print out the inverted bytes like this:

  file received by server has inverted byte at 7454789
  file received by server has inverted byte at 7454790
  file received by server has inverted byte at 7454791
  file received by server has inverted byte at 7454792
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch added the self test for MP_FASTCLOSE. Reused the argument
addr_nr_ns2 of do_transfer() to pass the extra arguments '-I 2' to
mptcp_connect commands. Then mptcp_connect disconnected the
connections to trigger the MP_FASTCLOSE sending and receiving. Used
chk_fclose_nr to check the MP_FASTCLOSE mibs and used chk_rst_nr to
check the MP_RST mibs. This test used the test_linkfail value to make
1024KB test files.

The output looks like this:

Created /tmp/tmp.XB8sfv1hJ0 (size 1024 KB) containing data sent by client
Created /tmp/tmp.RtTDbzqrXI (size 1024 KB) containing data sent by server
001 fastclose test                syn[ ok ] - synack[ ok ] - ack[ ok ]
                                  ctx[ ok ] - fclzrx[ ok ]
                                  rtx[ ok ] - rstrx [ ok ]   invert
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch reused the test_linkfail values above 2 to make test files with
the given sizes (KB) for both the client side and the server side. It's
useful for the test cases using different file sizes.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of using a global variable mptcp_connect, this patch added
a new local variable extra_args in do_transfer() to store the extra
arguments passing to the mptcp_connect commands.

This patch also renamed the speed level 'least' to 'speed_*'. This
more flexible way can avoid the need to add new speed levels in the
future.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch added a new function chk_rst_nr() to check the numbers
of the MP_RST sending and receiving mibs.

Showed in the output whether the inverted namespaces check order is used.
Since if we pass -Cz to mptcp_join.sh, the MP_RST information is showed
twice.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch added two more mibs for MP_RST, MPTCP_MIB_MPRSTTX for
the MP_RST sending and MPTCP_MIB_MPRSTRX for the MP_RST receiving.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch added a new function chk_fclose_nr() to check the numbers
of the MP_FASTCLOSE sending and receiving mibs.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch added two more mibs for MP_FASTCLOSE, MPTCP_MIB_MPFASTCLOSETX
for the MP_FASTCLOSE sending and MPTCP_MIB_MPFASTCLOSERX for receiving.

Also added a debug log for MP_FASTCLOSE receiving, printed out the recv_key
of MP_FASTCLOSE in mptcp_parse_option to show that MP_RST is received.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The number of self tests in mptcp_join.sh will soon be more than 100, the
output alignment is no longer OK. This patch adjusted it.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on
static allocation of IRQ resources in DT core code, this
causes an issue when using hierarchical interrupt domains
using "interrupts" property in the node as this bypassed
the hierarchical setup and messed up the irq chaining.

In preparation for removal of static setup of IRQ resource
from DT core code use platform_get_irq().
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220303100815.25605-1-tangmeng@uniontech.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On the debug summary page, show the /dev/ttyS<port> mapping.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220304054615.1737-1-jonathan.lemon@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The variables 'res' inside the functions sparx5_ptp_get_1ppm and
sparx5_ptp_get_nominal_value was not initialized. So in case of the default
case of the switch after, it would return an uninitialized variable.
This makes also the clang builds to failed.

Fixes: 0933bd04 ("net: sparx5: Add support for ptp clocks")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220304140918.3356873-1-horatiu.vultur@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-net-next-2022-03-04' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Luiz Augusto von Dentz says:

====================
bluetooth-next pull request for net-next:

 - Add new PID/VID (0x13d3/0x3567) for MT7921
 - Add new PID/VID (0x2550/0x8761) for Realtek 8761BU
 - Add support for LG LGSBWAC02 (MT7663BUN)
 - Add support for BCM43430A0 and BCM43430A1
 - Add support for Intel Madison Peak (MsP2)

* tag 'for-net-next-2022-03-04' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (21 commits)
  Bluetooth: btusb: Add another Realtek 8761BU
  Bluetooth: hci_bcm: add BCM43430A0 & BCM43430A1
  Bluetooth: use memset avoid memory leaks
  Bluetooth: btmtksdio: Fix kernel oops when sdio suspend.
  Bluetooth: btusb: Add a new PID/VID 13d3/3567 for MT7921
  Bluetooth: move adv_instance_cnt read within the device lock
  Bluetooth: hci_event: Add missing locking on hdev in hci_le_ext_adv_term_evt
  Bluetooth: btusb: Make use of of BIT macro to declare flags
  Bluetooth: Fix not checking for valid hdev on bt_dev_{info,warn,err,dbg}
  Bluetooth: mediatek: fix the conflict between mtk and msft vendor event
  Bluetooth: mt7921s: support bluetooth reset mechanism
  Bluetooth: make array bt_uuid_any static const
  Bluetooth: 6lowpan: No need to clear memory twice
  Bluetooth: btusb: Improve stability for QCA devices
  Bluetooth: btusb: add support for LG LGSBWAC02 (MT7663BUN)
  Bluetooth: btusb: Add support for Intel Madison Peak (MsP2) device
  Bluetooth: Improve skb handling in mgmt_device_connected()
  Bluetooth: Fix skb allocation in mgmt_remote_name() & mgmt_device_connected()
  Bluetooth: mgmt: Remove unneeded variable
  Bluetooth: hci_sync: fix undefined return of hci_disconnect_all_sync()
  ...
====================

Link: https://lore.kernel.org/r/20220304193919.649815-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf-next 2022-03-04

We've added 32 non-merge commits during the last 14 day(s) which contain
a total of 59 files changed, 1038 insertions(+), 473 deletions(-).

The main changes are:

1) Optimize BPF stackmap's build_id retrieval by caching last valid build_id,
   as consecutive stack frames are likely to be in the same VMA and therefore
   have the same build id, from Hao Luo.

2) Several improvements to arm64 BPF JIT, that is, support for JITing
   the atomic[64]_fetch_add, atomic[64]_[fetch_]{and,or,xor} and lastly
   atomic[64]_{xchg|cmpxchg}. Also fix the BTF line info dump for JITed
   programs, from Hou Tao.

3) Optimize generic BPF map batch deletion by only enforcing synchronize_rcu()
   barrier once upon return to user space, from Eric Dumazet.

4) For kernel build parse DWARF and generate BTF through pahole with enabled
   multithreading, from Kui-Feng Lee.

5) BPF verifier usability improvements by making log info more concise and
   replacing inv with scalar type name, from Mykola Lysenko.

6) Two follow-up fixes for BPF prog JIT pack allocator, from Song Liu.

7) Add a new Kconfig to allow for loading kernel modules with non-matching
   BTF type info; their BTF info is then removed on load, from Connor O'Brien.

8) Remove reallocarray() usage from bpftool and switch to libbpf_reallocarray()
   in order to fix compilation errors for older glibc, from Mauricio Vásquez.

9) Fix libbpf to error on conflicting name in BTF when type declaration
   appears before the definition, from Xu Kuohai.

10) Fix issue in BPF preload for in-kernel light skeleton where loaded BPF
    program fds prevent init process from setting up fd 0-2, from Yucong Sun.

11) Fix libbpf reuse of pinned perf RB map when max_entries is auto-determined
    by libbpf, from Stijn Tintel.

12) Several cleanups for libbpf and a fix to enforce perf RB map #pages to be
    non-zero, from Yuntao Wang.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (32 commits)
  bpf: Small BPF verifier log improvements
  libbpf: Add a check to ensure that page_cnt is non-zero
  bpf, x86: Set header->size properly before freeing it
  x86: Disable HAVE_ARCH_HUGE_VMALLOC on 32-bit x86
  bpf, test_run: Fix overflow in XDP frags bpf_test_finish
  selftests/bpf: Update btf_dump case for conflicting names
  libbpf: Skip forward declaration when counting duplicated type names
  bpf: Add some description about BPF_JIT_ALWAYS_ON in Kconfig
  bpf, docs: Add a missing colon in verifier.rst
  bpf: Cache the last valid build_id
  libbpf: Fix BPF_MAP_TYPE_PERF_EVENT_ARRAY auto-pinning
  bpf, selftests: Use raw_tp program for atomic test
  bpf, arm64: Support more atomic operations
  bpftool: Remove redundant slashes
  bpf: Add config to allow loading modules with BTF mismatches
  bpf, arm64: Feed byte-offset into bpf line info
  bpf, arm64: Call build_prologue() first in first JIT pass
  bpf: Fix issue with bpf preload module taking over stdout/stdin of kernel.
  bpftool: Bpf skeletons assert type sizes
  bpf: Cleanup comments
  ...
====================

Link: https://lore.kernel.org/r/20220304164313.31675-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This device is sometimes wrapped with a label "EDUP".

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#=107 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2550 ProdID=8761 Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00E04C239987
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
Signed-off-by: Helmut Grohne <helmut@subdivi.de>
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1955351Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Add the compatible for BCM43430A0 bluetooth used in lg-lenok and
BCM43430A1 used in asus-sparrow.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Use memset to initialize structs to prevent memory leaks
in l2cap_ecred_connect
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Do not kfree the skb when the skb failed to send with __hci_cmd_sync

2435.241210] Call trace:
[ 2435.241224]  kfree_skb+0x20/0x140
[ 2435.241240]  btmtksdio_sdio_wakeup+0x8c/0xcc
[ 2435.241360]  hci_suspend_notifier+0x108/0x184
[ 2435.241377]  notifier_call_chain_robust+0x58/0xd8
[ 2435.241390]  blocking_notifier_call_chain_robust+0x54/0x84
[ 2435.241402]  pm_notifier_call_chain_robust+0x2c/0x4c
[ 2435.241414]  suspend_prepare+0x40/0x238
[ 2435.241425]  enter_state+0xec/0x3a8
[ 2435.241436]  pm_suspend+0x60/0xcc
[ 2435.241446]  state_store+0xb8/0x114
[ 2435.241460]  kobj_attr_store+0x18/0x2c
[ 2435.241473]  sysfs_kf_write+0x44/0x58
[ 2435.241486]  kernfs_fop_write_iter+0xf4/0x190
[ 2435.241500]  vfs_write+0x2b0/0x2e4
[ 2435.241511]  ksys_write+0x80/0xec
[ 2435.241523]  __arm64_sys_write+0x24/0x30
[ 2435.241538]  el0_svc_common+0xf0/0x1d8
[ 2435.241550]  do_el0_svc_compat+0x28/0x54
[ 2435.241564]  el0_svc_compat+0x10/0x1c
[ 2435.241574]  el0_sync_compat_handler+0xa8/0xcc
[ 2435.241586]  el0_sync_compat+0x188/0x1c0
[ 2435.241606] Code: a9014ff4 910003fd b40002c0 aa0003f3 (b84d4c08)
[ 2435.241619] ---[ end trace d496539b850baf14 ]---

Fixes: ce64b3e9  ("Bluetooth: mt7921s: Support wake on bluetooth")
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Yake Yang <yake.yang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Add VID 13D3 & PID 3567 for MediaTek MT7921 USB Bluetooth chip.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3567 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Yake Yang <yake.yang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The field adv_instance_cnt is always accessed within a device lock,
except in the function add_advertising. A concurrent remove of an
advertisement with adding another one could result in the if check
"if a new instance was actually added" to not trigger, resulting
in not triggering the "advertising added event".
Signed-off-by: Niels Dossche <niels.dossche@ugent.be>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Both hci_find_adv_instance and hci_remove_adv_instance have a comment
above their function definition saying that these two functions require
the caller to hold the hdev->lock lock. However, hci_le_ext_adv_term_evt
does not acquire that lock and neither does its caller hci_le_meta_evt
(hci_le_meta_evt calls hci_le_ext_adv_term_evt via an indirect function
call because of the lookup in hci_le_ev_table).

The other event handlers all acquire and release the hdev->lock and they
follow the rule that hci_find_adv_instance and hci_remove_adv_instance
must be called while holding the hdev->lock lock.

The solution is to make sure hci_le_ext_adv_term_evt also acquires and
releases the hdev->lock lock. The check on ev->status which logs a
warning and does an early return is not covered by the lock because
other functions also access ev->status without holding the lock.
Signed-off-by: Niels Dossche <niels.dossche@ugent.be>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This makes use of BIT macro when declaring BTUSB flags which makes it
understand how many bits are in use and many are left.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This fixes attemting to print hdev->name directly which causes them to
print an error:

kernel: read_version:367: (efault): sock 000000006a3008f2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

There is a conflict between MediaTek wmt event and msft vendor extension
logic in the core layer since 145373cb ("Bluetooth: Add framework for
Microsoft vendor extension") was introduced because we changed the type of
mediatek wmt event to the type of msft vendor event in the driver.

But the purpose we reported mediatek event to the core layer is for the
diagnostic purpose with that we are able to see the full packet trace via
monitoring socket with btmon. Thus, it is harmless we keep the original
type of mediatek vendor event here to avoid breaking the msft extension
function especially they can be supported by Mediatek chipset like MT7921
, MT7922 devices and future devices.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Implement .cmd_timeout to reset the MT7921s device via a dedicated GPIO
pin when the firmware hang or the command has no response.
Co-developed-by: Mark Chen <mark-yw.chen@mediatek.com>
Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com>
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Chih-Ying Chiang <chih-yin.chiang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Don't populate the read-only array bt_uuid_any on the stack but
instead make it static const. Also makes the object code a little
smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

'peer_addr' is a structure embedded in 'struct lowpan_peer'. So there is no
need to explicitly call memset(0) on it. It is already zeroed by kzalloc()
when 'peer' is allocated.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

WCN6855 2.1 will reset to apply firmware downloaded, so wait
a moment for reset done then go ahead to improve stability.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The LG LGSBWAC02 (FCC ID: BEJLGSBWAC02) is a combo Wi-Fi/BT module which
can be found in several different LG TV models. This module is based on
already supported MediaTek MT7663U series.

Device from /sys/kernel/debug/usb/devices:

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=043e ProdID=310c Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=mt7663u
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

$ lsusb
Bus 003 Device 003: ID 8087:0035 Intel Corp.

$ cat /sys/kernel/debug/usb/devices
T:  Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0035 Rev= 0.00
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This patch introduce eir_skb_put_data() that can be used to simplify
operations on eir in goal of eliminating the necessity of intermediary
buffers.
eir_skb_put_data() is in pair to what eir_append_data() does with help of
eir_len, but without awkwardness when passing return value to skb_put() (as
it returns updated offset not size).
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This patch fixes skb allocation, as lack of space for ev might push skb
tail beyond its end.
Also introduce eir_precalc_len() that can be used instead of magic
numbers for similar eir operations on skb.

Fixes: cf1bce1d ("Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_FOUND")
Fixes: e9674143 ("Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_CONNECTED")
Signed-off-by: Angela Czubak <acz@semihalf.com>
Signed-off-by: Marek Maslanka <mm@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Return value from mgmt_cmd_complete() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>