- 14 Feb, 2017 36 commits
-
-
Or Gerlitz authored
Change the drivers to call ib_query_port in their get port immutable handler instead of their own query port handler. Doing this required to set the core cap flags of this device before the ib_query_port call is made, since the IB core might need these caps to serve the port query. Drivers are ensured by the IB core that the port attributes passed to the port query verb implementation are zero, and hence we removed the zeroing from the drivers. This patch doesn't add any new functionality. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Acked-by:
Adit Ranadive <aditr@vmware.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Or Gerlitz authored
Add protocol definition for the proprietary the USNIC driver. Signed-off-by:
Christian Benvenuti <benve@cisco.com> Signed-off-by:
-
Or Gerlitz authored
Mark support for the new raw packet protocol on Eth ports. Signed-off-by:
-
Or Gerlitz authored
Mark support for the new raw packet protocol on Eth ports. Signed-off-by:
-
Or Gerlitz authored
Define raw packet protocol which comes to denote this port supports working with raw ethernet frames, e.g as done with RAW_PACKET QPs. Signed-off-by:
-
Artemy Kovalyov authored
Add implicit MR, covering entire user address space. The MR is implemented as an indirect KSM MR consisting of 1GB direct MRs. Pages and direct MRs are added/removed to MR by ODP. Signed-off-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
-
Artemy Kovalyov authored
Allow other parts of mlx5_ib to use MR cache mechanism. * Add new functions mlx5_mr_cache_alloc and mlx5_mr_cache_free * Traditional MTT MKey buckets are limited by MAX_UMR_CACHE_ENTRY Additinal buckets may be added above. Signed-off-by:
-
Artemy Kovalyov authored
Add mlx5_cmd_null_mkey() function to access null_mkey information from firmware. Signed-off-by:
-
Artemy Kovalyov authored
When process is killed while pagefault operation still in progress - function will fail. In this specific case we don't want any warnings in dmesg to avoid log analyzers false alerts. So we need distinct error code for this case. Signed-off-by:
-
Artemy Kovalyov authored
Currently ODP MR may explicitly register virtual address space area of limited length. This change allows MR to cover entire process virtual address space dynamicaly adding/removing translation entries to device MTT. Add following changes to support implicit MR: * Allow umem to be zero size to back-up implicit MR. * Add new function ib_alloc_odp_umem() to add virtual memory regions to implicit MR dynamically on demand. * Add new function rbt_ib_umem_lookup() to find dynamically added virtual memory regions. * Expose function rbt_ib_umem_for_each_in_range() to other modules and make it safe Signed-off-by:
-
Artemy Kovalyov authored
Add flag IB_ODP_SUPPORT_IMPLICIT indicating implicit MR supported. Signed-off-by:
-
Noa Osherovich authored
Add support for creation of a WQ with scatter FCS capability, if this capability is supported by the hardware. Signed-off-by:
Noa Osherovich <noaos@mellanox.com> Reviewed-by:
Majd Dibbiny <majd@mellanox.com> Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Noa Osherovich authored
Enable creating a RAW Ethernet QP with cvlan stripping offload when it's supported by the hardware. Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Reviewed-by:
-
Noa Osherovich authored
Allow creating a WQ with cvlan stripping considering device's capabilities. The default value was fixed to disable vlan stripping till was asked explicitly. In addition, allow modification of a WQ to turn on/off this property. Signed-off-by:
-
Noa Osherovich authored
Check device's capabilities and report which raw packet capabilities are supported. Signed-off-by:
-
Noa Osherovich authored
Enable user applications to create a QP with cvlan stripping offload. Signed-off-by:
-
Noa Osherovich authored
Enable user space application via WQ creation and modification to turn on and off cvlan offload. Signed-off-by:
-
Noa Osherovich authored
Expose raw packet capabilities to user space as part of query device. Signed-off-by:
-
Noa Osherovich authored
Add a new creation flag to set the scatter FCS capability of a WQ. Signed-off-by:
-
Noa Osherovich authored
Add a QP creation flag to support cvlan stripping, it's applicable for RAW Ethernet QP. Signed-off-by:
-
Noa Osherovich authored
Enable WQ creation and modification with cvlan stripping offload. This includes: - Adding WQ creation flags. - Extending modify WQ to get flags and flags mask to enable turning it on and off. Signed-off-by:
-
Noa Osherovich authored
Expose raw packet capabilities in the core layer to enable a device to report it. Two existing capabilities, scatter FCS and IP CSUM were added to this field for a better user experience by exposing the raw packet caps from one location. This field will serve also for future capabilities for raw packet QP. A new capability was introduced - cvlan stripping, which is the device's ability to remove cvlan tag from an incoming packet and report it in the matching work completion. Signed-off-by:
-
Majd Dibbiny authored
Counters weren't updated due to Receive WQs' traffic since the counter-id was not associated with the RQ. Added support for associating the q-counter-id with the Receive WQ. The attachment is done only when changing WQ's state from RESET to READY in modify-WQ command. FW support is required for the above, without this support Receive WQ counters will not count. Signed-off-by:
-
Kamal Heib authored
This patch modify the Q counters implementation, so each one of the three Q counters groups will be exposed by the driver only if they are supported by the firmware. Signed-off-by:
Kamal Heib <kamalh@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
Flow steering is supposed to return EOPNOTSUPP error for unsupported fields and not ENOTSUPP error. Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Moses Reuben authored
Set flow tag in flow table entry, when IB_FLOW_SPEC_ACTION_TAG is part of the flow specifications. Flow tag doesn't support multicast flows, so it's passing to hardware only when used. Signed-off-by:
Moses Reuben <mosesr@mellanox.com> Signed-off-by:
-
Moses Reuben authored
The struct ib_uverbs_flow_spec_action_tag associates a tag_id with the flow defined by any number of other flow_spec entries which can reference L2, L3, and L4 packet contents. Use of ib_uverbs_flow_spec_action_tag allows the consumer to identify the set of rules which where matched by the packet by examining the tag_id in the CQE. Signed-off-by:
-
Moses Reuben authored
This specification identifies flow with a specific tag-id. This tag-id will be reported in the CQE. Signed-off-by:
-
Maor Gottlieb authored
Flow rules with same match criteria and value should be mapped to the same flow table entry regardless the flow tag identifier. Flow tag is part of flow table entry context and not of the destination, therefore we should return error when we try to add destination to flow table entry with different flow tag. Signed-off-by:
-
Leon Romanovsky authored
Commit 9603b61d ("mlx5: Move pci device handling from mlx5_ib to mlx5_core") moved prof_sel module parameter from mlx5_ib to mlx5_core and marked it as deprecated in 2014. Three years after deprecation, it is time to remove the deprecated module parameter. Signed-off-by:
Jack Morgenstein <jackm@mellanox.com> Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
-
Majd Dibbiny authored
For Routable RoCE QPs, the DSCP should be set in the QP's address path. The DSCP's value is derived from the traffic class. Fixes: 2811ba51 ("IB/mlx5: Add RoCE fields to Address Vector") Cc: Achiad Shochat <achiad@mellanox.com> Signed-off-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Maor Gottlieb authored
According to the device specification, we need to check that the has_smi bit is set in vport context before allowing send SMP MADs from VF. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
Maor Gottlieb authored
Check the has_smi bit in vport context and class version of MADs before allowing MADs processing to take place. MAD_IFC SMI commands can be executed only if smi bit is set. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by:
Parvi Kaustubhi <parvik@mellanox.com> Reviewed-by:
-
Kamal Heib authored
Make sure that the Q counters are supported by the FW before trying to allocate/deallocte them, this will avoid driver load failure when they aren't supported by the FW. Fixes: 0837e86a ('IB/mlx5: Add per port counters') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by:
-
Leon Romanovsky authored
In case of unsupported singature, we returned positive value, while the better approach is to return -EINVAL. In addition, in this change, the error print is enriched to provide an actual supplied signature type. Fixes: e6631814 ("IB/mlx5: Support IB_WR_REG_SIG_MR") Cc: Sagi Grimberg <sagi@grimberg.me> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Leon Romanovsky authored
When we initialize buffer to create SRQ in kernel, the number of pages was less than actually used in following mlx5_fill_page_array(). Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by:
-
- 09 Jan, 2017 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5 4K UAR The following series of patches optimizes the usage of the UAR area which is contained within the BAR 0-1. Previous versions of the firmware and the driver assumed each system page contains a single UAR. This patch set will query the firmware for a new capability that if published, means that the firmware can support UARs of fixed 4K regardless of system page size. In the case of powerpc, where page size equals 64KB, this means we can utilize 16 UARs per system page. Since user space processes by default consume eight UARs per context this means that with this change a process will need a single system page to fulfill that requirement and in fact make use of more UARs which is better in terms of performance. In addition to optimizing user-space processes, we introduce an allocator that can be used by kernel consumers to allocate blue flame registers (which are areas within a UAR that are used to write doorbells). This provides further optimization on using the UAR area since the Ethernet driver makes use of a single blue flame register per system page and now it will use two blue flame registers per 4K. The series also makes changes to naming conventions and now the terms used in the driver code match the terms used in the PRM (programmers reference manual). Thus, what used to be called UUAR (micro UAR) is now called BFREG (blue flame register). In order to support compatibility between different versions of library/driver/firmware, the library has now means to notify the kernel driver that it supports the new scheme and the kernel can notify the library if it supports this extension. So mixed versions of libraries can run concurrently without any issues. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
tcp_get_info() has to lock the socket, so lets lock it for an extended critical section, so that various fields have consistent values. This solves an annoying issue that some applications reported when multiple counters are updated during one particular rx/rx event, and TCP_INFO was called from another cpu. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
David S. Miller authored
Alexei Starovoitov says: ==================== bpf: verifier improvements A number of bpf verifier improvements from Gianluca. See individual patches for details. ==================== Signed-off-by: -
Alexei Starovoitov authored
since ARG_PTR_TO_STACK is no longer just pointer to stack rename it to ARG_PTR_TO_MEM and adjust comment. Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
