- 31 Oct, 2023 1 commit
-
-
Takashi Iwai authored
Pull 6.7 materials Signed-off-by:Takashi Iwai <tiwai@suse.de>
-
- 29 Oct, 2023 1 commit
-
-
Arnd Bergmann authored
The newly introduced function is global but only called in this one file and has no extern prototype, so it should probably be static: sound/pci/hda/cs35l41_hda.c:733:5: error: no previous prototype for 'cs35l41_verify_id' [-Werror=missing-prototypes] 733 | int cs35l41_verify_id(struct cs35l41_hda *cs35l41, unsigned int *regid, unsigned int *reg_revid) Fixes: 881b7bce ("ALSA: hda: cs35l41: Run boot process during resume callbacks") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231027152515.482411-1-arnd@kernel.orgSigned-off-by:
-
- 27 Oct, 2023 7 commits
-
-
Geoffrey D. Bennett authored
scarlett2_add_firmware_version_ctl() may return an error, but the return value was not being checked. Add the missing check. Signed-off-by:
Geoffrey D. Bennett <g@b4.vu> Fixes: 701949cc ("ALSA: scarlett2: Add support for reading firmware version") Link: https://lore.kernel.org/r/ZTuKcXajVnuelBEb@m.b4.vuSigned-off-by:
-
Matias Ezequiel Vara Larsen authored
This commit uses the ack() callback to determine when a buffer has been updated, then exposes it to guest. The current mechanism splits a dma buffer into descriptors that are exposed to the device. This dma buffer is shared with the user application. When the device consumes a buffer, the driver moves the request from the used ring to available ring. The driver exposes the buffer to the device without knowing if the content has been updated from the user. The section 2.8.21.1 of the virtio spec states that: "The device MAY access the descriptor chains the driver created and the memory they refer to immediately". If the device picks up buffers from the available ring just after it is notified, it happens that the content may be old. When the ack() callback is invoked, the driver exposes only the buffers that have already been updated, i.e., enqueued in the available ring. Thus, the device always picks up a buffer that is updated. For capturing, the driver starts by exposing all the available buffers to device. After device updates the content of a buffer, it enqueues it in the used ring. It is only after the ack() for capturing is issued that the driver re-enqueues the buffer in the available ring. Co-developed-by:
Anton Yakovlev <anton.yakovlev@opensynergy.com> Signed-off-by:
Matias Ezequiel Vara Larsen <mvaralar@redhat.com> Link: https://lore.kernel.org/r/ZTjkn1YAFz67yfqx@fedoraSigned-off-by:
-
Geoffrey D. Bennett authored
The values previously returned by the Level Meter control were passed through from the interface without interpretation, but it has been discovered that the order of the values matches the mux assignment order (which is not presented to userspace). In addition, the values for disabled mux outputs, and mux outputs which share a source are invalid. This patch adds a per-device meter_map[], and a dynamic meter_level_map[] which is updated on routing changes. The meter level map gets used by scarlett2_meter_ctl_get() to both present the values in a standard order, and to fix up the invalid values by zeroing them (for disabled outputs) and copying them (for mux outputs which share a source). Signed-off-by:
-
Geoffrey D. Bennett authored
Line outputs 3 & 4 on the Gen 3 18i8 are internally the analogue 7 and 8 outputs, and this renumbering is hidden from the user by line_out_remap(). By allowing higher values (representing non-analogue outputs) to be passed to line_out_remap(), repeated code from scarlett2_mux_src_enum_ctl_get() and scarlett2_mux_src_enum_ctl_put() can be removed. Signed-off-by:
-
Geoffrey D. Bennett authored
The 84 bytes read during initialisation step 2 were previously ignored. This patch retrieves the firmware version from bytes 8-11, stores it in the scarlett2_data struct, and makes it available through a new control "Firmware Version". Signed-off-by:
-
Geoffrey D. Bennett authored
The config sets are named NO_MIXER, GEN_2, GEN_3, and CLARETT currently. Rename NO_MIXER and GEN_3 to GEN_3A and GEN_3B respectively as NO_MIXER is only for the smaller Gen 3 devices. Signed-off-by:
-
Geoffrey D. Bennett authored
This driver was originally developed for the Focusrite Scarlett Gen 2 series. Since then Focusrite have used a similar protocol for their Gen 3, Gen 4, Clarett USB, Clarett+, and Vocaster series. Let's call this common protocol the "Scarlett 2 Protocol" and rename the driver to scarlett2 to not imply that it is restricted to Gen 2 series devices. Signed-off-by:
-
- 26 Oct, 2023 19 commits
-
-
Stefan Binding authored
The existing code checks for the correct state transition after sending a command. However, it is possible for the message box to return -1, which indicates an error, if an error has occurred in the firmware. We can detect if the error has occurred, and return a different error. In addition, there is no recovering from a CSPL error, so the retry mechanism is not needed in this case, and we can return immediately. Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Acked-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231026150558.2105827-9-sbinding@opensource.cirrus.comSigned-off-by:
-
Stefan Binding authored
CSPL firmware should be in RUNNING or PAUSED state after loading. If not, the firmware has not been loaded correctly, and we can unload it and pass the error up. Signed-off-by:
-
Stefan Binding authored
Given the part is about to reset due to system suspend, and we are already in hibernate, there is no need to wake up the amp, just to get it ready to be reset. We just need to ensure cs_dsp is ready for reset by resetting the states. Signed-off-by:
-
Stefan Binding authored
To ensure the chip has correctly reset during probe and system suspend, we need to force a software reset, in case of systems where the hardware reset is not available. The software reset register was labelled as volatile but not readable, however, it is readable, (just returns 0x0). Adding it to readable registers means it will be correctly treated as volatile, and thus will not be cached. Signed-off-by:
-
Stefan Binding authored
During initial probe, after reset is asserted for the first time, the driver goes through a boot process to ensure the amp is ready to be used. This involves verifying a boot flag, as well as verifying the chip ids. This is necessary since it is possible for the amp to have been fully reset by the system suspend calls. Signed-off-by:
-
Stefan Binding authored
To ensure we are in a known state, exiting from reset at the point of probe or in system resume, assert reset before we de-assert it. Since the BIOS may enter into a pre-boot environment to control the amps (for example for boot beep), we need to ensure we start from a known, reset state prior to probe or system resume. Signed-off-by:
-
Stefan Binding authored
Some system suspend modes may remove power supplies. To ensure we are not running during this time, we should assert reset. Note: since the amps use a shared reset, asserting reset prior to system suspend only works if the amps are suspended in the reverse order to probe. Signed-off-by:
-
Stefan Binding authored
This laptop has an incorrect setting in its _DSD for boost type, but the rest of the _DSD is correct, and we can still use the reset label to obtain the reset gpio. Also fix channel map so that amp 0 is right, and amp 1 is left. Fixes: 581523ee ("ALSA: hda: cs35l41: Override the _DSD for HP Zbook Fury 17 G9 to correct boost type") Signed-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-12-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The header file contains lots of outdated comments and definitions. Drop those as cleanup. Link: https://lore.kernel.org/r/20231025132314.5878-11-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-10-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-9-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-8-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-7-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-6-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-5-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-4-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-2-tiwai@suse.deSigned-off-by:
-
- 25 Oct, 2023 2 commits
-
-
Max McCarthy authored
McIntosh devices supporting native DSD require the feature to be explicitly exposed. Add a flag that fixes an issue where DSD audio was defaulting to DSD over PCM instead of delivering raw DSD data. Signed-off-by:
Max McCarthy <mmccarthy@mcintoshlabs.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/BL0PR13MB4433226005162D186A8DFF4AD6DFA@BL0PR13MB4433.namprd13.prod.outlook.comSigned-off-by:
-
Takashi Iwai authored
Like the change we've done for remove callback, the newly introduced remove_late callback should be changed to void return, too. Fixes: 17baaa1f ("ASoC: SOF: core: Add probe_early and remove_late callbacks") Acked-by:
-
- 23 Oct, 2023 1 commit
-
-
Jaroslav Kysela authored
As discussed on alsa-devel mailing list [1], it is useful to have an open mailing list to avoid moderation delays for the kernel patch work. Use linux-sound mailing list for kernel driver related threads. In the first stage, change the list for the ALSA core, ASoC and tests. [1] https://lore.kernel.org/alsa-devel/20231019-posture-cache-fe060b@meerkat/Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Reviewed-by:
Ivan Orlov <ivan.orlov0322@gmail.com> Acked-by:
Konstantin Ryabitsev <konstantin@linuxfoundation.org> Link: https://lore.kernel.org/r/20231020071247.973909-1-perex@perex.czSigned-off-by:
-
- 21 Oct, 2023 1 commit
-
-
Takashi Iwai authored
Merge tag 'asoc-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v6.7 This is quite a large set of changes but mostly due to API cleanups and in driver specific ways rather than due to anything subsystem wide. Highlights include: - Standardisation of API prefixes on snd_soc_, removing asoc_. - GPIO API usage improvements. - Support for HDA patches. - Lots of work on SOF, including crash dump support. - Support for AMD platforms with es83xx, Awinc AT87390, many Intel platforms, many Mediatek platforms, Qualcomm SM6115, Richtek RTQ9128 and Texas Instruments TAS575x. [ the merge conflicts around SOF Intel HD-audio and CS35L41 subcodec drivers are resolved here -- tiwai ]
-
- 20 Oct, 2023 1 commit
-
-
Mark Hasemeyer authored
Some Jasperlake Chromebooks overwrite the system vendor DMI value to the name of the OEM that manufactured the device. This breaks Chromebook quirk detection as it expects the system vendor to be "Google". Add another quirk detection entry that looks for "Google" in the BIOS version. Cc: stable@vger.kernel.org Signed-off-by:
Mark Hasemeyer <markhas@chromium.org> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20231018235944.1860717-1-markhas@chromium.orgSigned-off-by:
-
- 19 Oct, 2023 7 commits
-
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Two nice cleanups from Brent Lu and Charles Keepax, and one RaptorLake update.
-
Brent Lu authored
Use intel_board module for dmic01 and dmic16k DAI link initialization. Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Brent Lu <brent.lu@intel.com> Signed-off-by:
-
Brent Lu authored
Use intel_board module for dmic01 and dmic16k DAI link initialization. Reviewed-by:
-
Brent Lu authored
Use intel_board module for dmic01 and dmic16k DAI link initialization. Reviewed-by:
-
Brent Lu authored
Use intel_board module for dmic01 and dmic16k DAI link initialization. Reviewed-by:
-
Brent Lu authored
Add functions for machine drivers to initialize dmic01 and dmic16k DAI links. Reviewed-by:
-
Terry Cheong authored
Adding support back to RPL devices that lost audio after the RPL/ADL split. The hardware configuration is: SSP0: NAU88L25/NAU88L25YGB codec SSP1: MAX98360A amplifier Reviewed-by:
Terry Cheong <htcheong@chromium.org> Signed-off-by:
-
