Use subsys_initcall for registration of all templates and generic
algorithm implementations, rather than module_init.  Then change
cryptomgr to use arch_initcall, to place it before the subsys_initcalls.

This is needed so that when both a generic and optimized implementation
of an algorithm are built into the kernel (not loadable modules), the
generic implementation is registered before the optimized one.
Otherwise, the self-tests for the optimized implementation are unable to
allocate the generic implementation for the new comparison fuzz tests.

Note that on arm, a side effect of this change is that self-tests for
generic implementations may run before the unaligned access handler has
been installed.  So, unaligned accesses will crash the kernel.  This is
arguably a good thing as it makes it easier to detect that type of bug.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When the extra crypto self-tests are enabled, test each AEAD algorithm
against its generic implementation when one is available.  This
involves: checking the algorithm properties for consistency, then
randomly generating test vectors using the generic implementation and
running them against the implementation under test.  Both good and bad
inputs are tested.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When the extra crypto self-tests are enabled, test each skcipher
algorithm against its generic implementation when one is available.
This involves: checking the algorithm properties for consistency, then
randomly generating test vectors using the generic implementation and
running them against the implementation under test.  Both good and bad
inputs are tested.

This has already detected a bug in the skcipher_walk API, a bug in the
LRW template, and an inconsistency in the cts implementations.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When the extra crypto self-tests are enabled, test each hash algorithm
against its generic implementation when one is available.  This
involves: checking the algorithm properties for consistency, then
randomly generating test vectors using the generic implementation and
running them against the implementation under test.  Both good and bad
inputs are tested.

This has already detected a bug in the x86 implementation of poly1305,
bugs in crct10dif, and an inconsistency in cbcmac.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add some helper functions in preparation for fuzz testing algorithms
against their generic implementation.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In preparation for fuzz testing algorithms against their generic
implementation, make error messages in testmgr identify test vectors by
name rather than index.  Built-in test vectors are simply "named" by
their index in testmgr.h, as before.  But (in later patches) generated
test vectors will be given more descriptive names to help developers
debug problems detected with them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Update testmgr to support testing for specific errors from setkey() and
digest() for hashes; setkey() and encrypt()/decrypt() for skciphers and
ciphers; and setkey(), setauthsize(), and encrypt()/decrypt() for AEADs.
This is useful because algorithms usually restrict the lengths or format
of the message, key, and/or authentication tag in some way.  And bad
inputs should be tested too, not just good inputs.

As part of this change, remove the ambiguously-named 'fail' flag and
replace it with 'setkey_error = -EINVAL' for the only test vector that
used it -- the DES weak key test vector.  Note that this tightens the
test to require -EINVAL rather than any error code, but AFAICS this
won't cause any test failure.

Other than that, these new fields aren't set on any test vectors yet.
Later patches will do so.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Allow to use EC-RDSA signatures for IMA by determining signature type by
the hash algorithm name. This works good for EC-RDSA since Streebog and
EC-RDSA should always be used together.

Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: linux-integrity@vger.kernel.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add testmgr test vectors for EC-RDSA algorithm for every of five
supported parameters (curves). Because there are no officially published
test vectors for the curves, the vectors are generated by gost-engine.
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add Elliptic Curve Russian Digital Signature Algorithm (GOST R
34.10-2012, RFC 7091, ISO/IEC 14888-3) is one of the Russian (and since
2018 the CIS countries) cryptographic standard algorithms (called GOST
algorithms). Only signature verification is supported, with intent to be
used in the IMA.

Summary of the changes:

* crypto/Kconfig:
  - EC-RDSA is added into Public-key cryptography section.

* crypto/Makefile:
  - ecrdsa objects are added.

* crypto/asymmetric_keys/x509_cert_parser.c:
  - Recognize EC-RDSA and Streebog OIDs.

* include/linux/oid_registry.h:
  - EC-RDSA OIDs are added to the enum. Also, a two currently not
    implemented curve OIDs are added for possible extension later (to
    not change numbering and grouping).

* crypto/ecc.c:
  - Kenneth MacKay copyright date is updated to 2014, because
    vli_mmod_slow, ecc_point_add, ecc_point_mult_shamir are based on his
    code from micro-ecc.
  - Functions needed for ecrdsa are EXPORT_SYMBOL'ed.
  - New functions:
    vli_is_negative - helper to determine sign of vli;
    vli_from_be64 - unpack big-endian array into vli (used for
      a signature);
    vli_from_le64 - unpack little-endian array into vli (used for
      a public key);
    vli_uadd, vli_usub - add/sub u64 value to/from vli (used for
      increment/decrement);
    mul_64_64 - optimized to use __int128 where appropriate, this speeds
      up point multiplication (and as a consequence signature
      verification) by the factor of 1.5-2;
    vli_umult - multiply vli by a small value (speeds up point
      multiplication by another factor of 1.5-2, depending on vli sizes);
    vli_mmod_special - module reduction for some form of Pseudo-Mersenne
      primes (used for the curves A);
    vli_mmod_special2 - module reduction for another form of
      Pseudo-Mersenne primes (used for the curves B);
    vli_mmod_barrett - module reduction using pre-computed value (used
      for the curve C);
    vli_mmod_slow - more general module reduction which is much slower
     (used when the modulus is subgroup order);
    vli_mod_mult_slow - modular multiplication;
    ecc_point_add - add two points;
    ecc_point_mult_shamir - add two points multiplied by scalars in one
      combined multiplication (this gives speed up by another factor 2 in
      compare to two separate multiplications).
    ecc_is_pubkey_valid_partial - additional samity check is added.
  - Updated vli_mmod_fast with non-strict heuristic to call optimal
      module reduction function depending on the prime value;
  - All computations for the previously defined (two NIST) curves should
    not unaffected.

* crypto/ecc.h:
  - Newly exported functions are documented.

* crypto/ecrdsa_defs.h
  - Five curves are defined.

* crypto/ecrdsa.c:
  - Signature verification is implemented.

* crypto/ecrdsa_params.asn1, crypto/ecrdsa_pub_key.asn1:
  - Templates for BER decoder for EC-RDSA parameters and public key.

Cc: linux-integrity@vger.kernel.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

ecc.c have algorithms that could be used togeter by ecdh and ecrdsa.
Make it separate module. Add CRYPTO_ECC into Kconfig. EXPORT_SYMBOL and
document to what seems appropriate. Move structs ecc_point and ecc_curve
from ecc_curve_defs.h into ecc.h.

No code changes.
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Group RSA, DH, and ECDH into Public-key cryptography config section.
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Some public key algorithms (like EC-DSA) keep in parameters field
important data such as digest and curve OIDs (possibly more for
different EC-DSA variants). Thus, just setting a public key (as
for RSA) is not enough.

Append parameters into the key stream for akcipher_set_{pub,priv}_key.
Appended data is: (u32) algo OID, (u32) parameters length, parameters
data.

This does not affect current akcipher API nor RSA ciphers (they could
ignore it). Idea of appending parameters to the key stream is by Herbert
Xu.

Cc: David Howells <dhowells@redhat.com>
Cc: Denis Kenzior <denkenz@gmail.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Treat (struct public_key_signature)'s digest same as its signature (s).
Since digest should be already in the kmalloc'd memory do not kmemdup
digest value before calling {public,tpm}_key_verify_signature.

Patch is split from the previous as suggested by Herbert Xu.
Suggested-by: David Howells <dhowells@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Previous akcipher .verify() just `decrypts' (using RSA encrypt which is
using public key) signature to uncover message hash, which was then
compared in upper level public_key_verify_signature() with the expected
hash value, which itself was never passed into verify().

This approach was incompatible with EC-DSA family of algorithms,
because, to verify a signature EC-DSA algorithm also needs a hash value
as input; then it's used (together with a signature divided into halves
`r||s') to produce a witness value, which is then compared with `r' to
determine if the signature is correct. Thus, for EC-DSA, nor
requirements of .verify() itself, nor its output expectations in
public_key_verify_signature() wasn't sufficient.

Make improved .verify() call which gets hash value as input and produce
complete signature check without any output besides status.

Now for the top level verification only crypto_akcipher_verify() needs
to be called and its return value inspected.

Make sure that `digest' is in kmalloc'd memory (in place of `output`) in
{public,tpm}_key_verify_signature() as insisted by Herbert Xu, and will
be changed in the following commit.

Cc: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In preparation for new akcipher verify call remove sign/verify callbacks
from RSA backends and make PKCS1 driver call encrypt/decrypt instead.

This also complies with the well-known idea that raw RSA should never be
used for sign/verify. It only should be used with proper padding scheme
such as PKCS1 driver provides.

Cc: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Cc: qat-linux@intel.com
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Because with the introduction of EC-RDSA and change in workings of RSA
in regard to sign/verify, akcipher could have not all callbacks defined,
check the presence of callbacks in crypto_register_akcipher() and
provide default implementation if the callback is not implemented.

This is suggested by Herbert Xu instead of checking the presence of the
callback on every request.
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.

It also removes the registration of the non-standard des/des3
ablkcipher algorithms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Lionel Debieve<lionel.debieve@st.com>
Tested-by: Lionel Debieve<lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.

It also removes a couple of unnecessary key length checks that
are already performed by the crypto API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.

It also removes an unnecessary key length checks that are already
performed by the crypto API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.

It also removes a couple of unnecessary key length checks that
are already performed by the crypto API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.

It also removes a couple of unnecessary key length checks that
are already performed by the crypto API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.

This patch also removes the bogus CFB 3DES modes that only work
with a short 3DES key not otherwise allowed by the crypto API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>