- 03 Jun, 2021 4 commits
-
-
Pavel Skripkin authored
Syzbot reported memory leak in kcm_sendmsg()[1]. The problem was in non-freed frag_list in case of error. In the while loop: if (head == skb) skb_shinfo(head)->frag_list = tskb; else skb->next = tskb; frag_list filled with skbs, but nothing was freeing them. backtrace: [<0000000094c02615>] __alloc_skb+0x5e/0x250 net/core/skbuff.c:198 [<00000000e5386cbd>] alloc_skb include/linux/skbuff.h:1083 [inline] [<00000000e5386cbd>] kcm_sendmsg+0x3b6/0xa50 net/kcm/kcmsock.c:967 [1] [<00000000f1613a8a>] sock_sendmsg_nosec net/socket.c:652 [inline] [<00000000f1613a8a>] sock_sendmsg+0x4c/0x60 net/socket.c:672 Reported-and-tested-by: syzbot+b039f5699bd82e1fb011@syzkaller.appspotmail.com Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module") Cc: stable@vger.kernel.org Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
zhang kai authored
addrconf_set_sit_dstaddr will use parms->name. Signed-off-by:
zhang kai <zhangkaiheb@126.com> Signed-off-by:
-
Jiapeng Chong authored
The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'err'. Eliminate the follow smatch warning: net/core/rtnetlink.c:4834 rtnl_bridge_notify() warn: missing error code 'err'. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Do not allow to add conntrack helper extension for confirmed conntracks in the nf_tables ct expectation support. 2) Fix bogus EBUSY in nfnetlink_cthelper when NFCTH_PRIV_DATA_LEN is passed on userspace helper updates. ==================== Signed-off-by:
-
- 02 Jun, 2021 14 commits
-
-
Wong Vee Khee authored
In the case of MDIO bus registration failure due to no external PHY devices is connected to the MAC, clk_disable_unprepare() is called in stmmac_bus_clk_config() and intel_eth_pci_probe() respectively. The second call in intel_eth_pci_probe() will caused the following:- [ 16.578605] intel-eth-pci 0000:00:1e.5: No PHY found [ 16.583778] intel-eth-pci 0000:00:1e.5: stmmac_dvr_probe: MDIO bus (id: 2) registration failed [ 16.680181] ------------[ cut here ]------------ [ 16.684861] stmmac-0000:00:1e.5 already disabled [ 16.689547] WARNING: CPU: 13 PID: 2053 at drivers/clk/clk.c:952 clk_core_disable+0x96/0x1b0 [ 16.697963] Modules linked in: dwc3 iTCO_wdt mei_hdcp iTCO_vendor_support udc_core x86_pkg_temp_thermal kvm_intel marvell10g kvm sch_fq_codel nfsd irqbypass dwmac_intel(+) stmmac uio ax88179_178a pcs_xpcs phylink uhid spi_pxa2xx_platform usbnet mei_me pcspkr tpm_crb mii i2c_i801 dw_dmac dwc3_pci thermal dw_dmac_core intel_rapl_msr libphy i2c_smbus mei tpm_tis intel_th_gth tpm_tis_core tpm intel_th_acpi intel_pmc_core intel_th i915 fuse configfs snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_pcm snd_timer snd soundcore [ 16.746785] CPU: 13 PID: 2053 Comm: systemd-udevd Tainted: G U 5.13.0-rc3-intel-lts #76 [ 16.756134] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DRR4 CRB, BIOS ADLIFSI1.R00.1494.B00.2012031421 12/03/2020 [ 16.769465] RIP: 0010:clk_core_disable+0x96/0x1b0 [ 16.774222] Code: 00 8b 05 45 96 17 01 85 c0 7f 24 48 8b 5b 30 48 85 db 74 a5 8b 43 7c 85 c0 75 93 48 8b 33 48 c7 c7 6e 32 cc b7 e8 b2 5d 52 00 <0f> 0b 5b 5d c3 65 8b 05 76 31 18 49 89 c0 48 0f a3 05 bc 92 1a 01 [ 16.793016] RSP: 0018:ffffa44580523aa0 EFLAGS: 00010086 [ 16.798287] RAX: 0000000000000000 RBX: ffff8d7d0eb70a00 RCX: 0000000000000000 [ 16.805435] RDX: 0000000000000002 RSI: ffffffffb7c62d5f RDI: 00000000ffffffff [ 16.812610] RBP: 0000000000000287 R08: 0000000000000000 R09: ffffa445805238d0 [ 16.819759] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8d7d0eb70a00 [ 16.826904] R13: ffff8d7d027370c8 R14: 0000000000000006 R15: ffffa44580523ad0 [ 16.834047] FS: 00007f9882fa2600(0000) GS:ffff8d80a0940000(0000) knlGS:0000000000000000 [ 16.842177] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.847966] CR2: 00007f9882bea3d8 CR3: 000000010b126001 CR4: 0000000000370ee0 [ 16.855144] Call Trace: [ 16.857614] clk_core_disable_lock+0x1b/0x30 [ 16.861941] intel_eth_pci_probe.cold+0x11d/0x136 [dwmac_intel] [ 16.867913] pci_device_probe+0xcf/0x150 [ 16.871890] really_probe+0xf5/0x3e0 [ 16.875526] driver_probe_device+0x64/0x150 [ 16.879763] device_driver_attach+0x53/0x60 [ 16.883998] __driver_attach+0x9f/0x150 [ 16.887883] ? device_driver_attach+0x60/0x60 [ 16.892288] ? device_driver_attach+0x60/0x60 [ 16.896698] bus_for_each_dev+0x77/0xc0 [ 16.900583] bus_add_driver+0x184/0x1f0 [ 16.904469] driver_register+0x6c/0xc0 [ 16.908268] ? 0xffffffffc07ae000 [ 16.911598] do_one_initcall+0x4a/0x210 [ 16.915489] ? kmem_cache_alloc_trace+0x305/0x4e0 [ 16.920247] do_init_module+0x5c/0x230 [ 16.924057] load_module+0x2894/0x2b70 [ 16.927857] ? __do_sys_finit_module+0xb5/0x120 [ 16.932441] __do_sys_finit_module+0xb5/0x120 [ 16.936845] do_syscall_64+0x42/0x80 [ 16.940476] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 16.945586] RIP: 0033:0x7f98830e5ccd [ 16.949177] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 93 31 0c 00 f7 d8 64 89 01 48 [ 16.967970] RSP: 002b:00007ffc66b60168 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 16.975583] RAX: ffffffffffffffda RBX: 000055885de35ef0 RCX: 00007f98830e5ccd [ 16.982725] RDX: 0000000000000000 RSI: 00007f98832541e3 RDI: 0000000000000012 [ 16.989868] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000 [ 16.997042] R10: 0000000000000012 R11: 0000000000000246 R12: 00007f98832541e3 [ 17.004222] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffc66b60328 [ 17.011369] ---[ end trace df06a3dab26b988c ]--- [ 17.016062] ------------[ cut here ]------------ [ 17.020701] stmmac-0000:00:1e.5 already unprepared Removing the stmmac_bus_clks_config() call in stmmac_dvr_probe and let dwmac-intel to handle the unprepare and disable of the clk device. Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver") Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> Reviewed-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
-
Josh Triplett authored
If the user specifies a hostname or domain name as part of the ip= command-line option, preserve it and don't overwrite it with one supplied by DHCP/BOOTP. For instance, ip=::::myhostname::dhcp will use "myhostname" rather than ignoring and overwriting it. Fix the comment on ic_bootp_string that suggests it only copies a string "if not already set"; it doesn't have any such logic. Signed-off-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linuDavid S. Miller authored
x/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-06-01 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: -
Pablo Neira Ayuso authored
The private helper data size cannot be updated. However, updates that contain NFCTH_PRIV_DATA_LEN might bogusly hit EBUSY even if the size is the same. Fixes: 12f7a505 ("netfilter: add user-space connection tracking helper infrastructure") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
nft_ct_expect_obj_eval() calls nf_ct_ext_add() for a confirmed conntrack entry. However, nf_ct_ext_add() can only be called for !nf_ct_is_confirmed(). [ 1825.349056] WARNING: CPU: 0 PID: 1279 at net/netfilter/nf_conntrack_extend.c:48 nf_ct_xt_add+0x18e/0x1a0 [nf_conntrack] [ 1825.351391] RIP: 0010:nf_ct_ext_add+0x18e/0x1a0 [nf_conntrack] [ 1825.351493] Code: 41 5c 41 5d 41 5e 41 5f c3 41 bc 0a 00 00 00 e9 15 ff ff ff ba 09 00 00 00 31 f6 4c 89 ff e8 69 6c 3d e9 eb 96 45 31 ed eb cd <0f> 0b e9 b1 fe ff ff e8 86 79 14 e9 eb bf 0f 1f 40 00 0f 1f 44 00 [ 1825.351721] RSP: 0018:ffffc90002e1f1e8 EFLAGS: 00010202 [ 1825.351790] RAX: 000000000000000e RBX: ffff88814f5783c0 RCX: ffffffffc0e4f887 [ 1825.351881] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88814f578440 [ 1825.351971] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff88814f578447 [ 1825.352060] R10: ffffed1029eaf088 R11: 0000000000000001 R12: ffff88814f578440 [ 1825.352150] R13: ffff8882053f3a00 R14: 0000000000000000 R15: 0000000000000a20 [ 1825.352240] FS: 00007f992261c900(0000) GS:ffff889faec00000(0000) knlGS:0000000000000000 [ 1825.352343] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1825.352417] CR2: 000056070a4d1158 CR3: 000000015efe0000 CR4: 0000000000350ee0 [ 1825.352508] Call Trace: [ 1825.352544] nf_ct_helper_ext_add+0x10/0x60 [nf_conntrack] [ 1825.352641] nft_ct_expect_obj_eval+0x1b8/0x1e0 [nft_ct] [ 1825.352716] nft_do_chain+0x232/0x850 [nf_tables] Add the ct helper extension only for unconfirmed conntrack. Skip rule evaluation if the ct helper extension does not exist. Thus, you can only create expectations from the first packet. It should be possible to remove this limitation by adding a new action to attach a generic ct helper to the first packet. Then, use this ct helper extension from follow up packets to create the ct expectation. While at it, add a missing check to skip the template conntrack too and remove check for IPCT_UNTRACK which is implicit to !ct. Fixes: 857b4602 ("netfilter: nft_ct: add ct expectations support") Signed-off-by:
-
Yevgeny Kliteynik authored
Flow table that contains flow pointing to multiple flow tables or multiple TIRs must have a level lower than 64. In our case it applies to muli- destination flow table. Fix the level of the created table to comply with HW Spec definitions, and still make sure that its level lower than SW-owned tables, so that it would be possible to point from the multi-destination FW table to SW tables. Fixes: 34583bee ("net/mlx5: DR, Create multi-destination table for SW-steering use") Signed-off-by:
Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by:
Alex Vesker <valex@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Aya Levin authored
When a driver's profile doesn't support a dedicated PTP-RQ, configuration of CQE compression while HW TS is configured should fail. Fixes: 885b8cfb ("net/mlx5e: Update ethtool setting of CQE compression") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Aya Levin authored
When the driver's profile doesn't support a dedicated PTP-RQ, the PTP accuracy of HW TS is affected by the CQE compression. In this case, turn off CQE compression. Otherwise, the driver crashes: BUG: kernel NULL pointer dereference, address:0000000000000018 ... ... RIP: 0010:mlx5e_ptp_rx_set_fs+0x25/0x1a0 [mlx5_core] ... ... Call Trace: mlx5e_ptp_activate_channel+0xb2/0xf0 [mlx5_core] mlx5e_activate_priv_channels+0x3b9/0x8c0 [mlx5_core] ? __mutex_unlock_slowpath+0x45/0x2a0 ? mlx5e_refresh_tirs+0x151/0x1e0 [mlx5_core] mlx5e_switch_priv_channels+0x1cd/0x2d0 [mlx5_core] ? mlx5e_xdp_allowed+0x150/0x150 [mlx5_core] mlx5e_safe_switch_params+0x118/0x3c0 [mlx5_core] ? __mutex_lock+0x6e/0x8e0 ? mlx5e_hwstamp_set+0xa9/0x300 [mlx5_core] mlx5e_hwstamp_set+0x194/0x300 [mlx5_core] ? dev_ioctl+0x9b/0x3d0 mlx5i_ioctl+0x37/0x60 [mlx5_core] mlx5i_pkey_ioctl+0x12/0x20 [mlx5_core] dev_ioctl+0xa9/0x3d0 sock_ioctl+0x268/0x420 __x64_sys_ioctl+0x3d8/0x790 ? lockdep_hardirqs_on_prepare+0xe4/0x190 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 960fbfe2 ("net/mlx5e: Allow coexistence of CQE compression and HW TS PTP") Signed-off-by:
-
Roi Dayan authored
On some devices the ignore flow level cap is not supported and we shouldn't use it. Setting the dest ft with mlx5_chains_get_tc_end_ft() already gives the correct end ft if ignore flow level cap is supported or not. Fixes: 39ac237c ("net/mlx5: E-Switch, Refactor chains and priorities") Signed-off-by:
Roi Dayan <roid@nvidia.com> Reviewed-by:
Paul Blakey <paulb@nvidia.com> Signed-off-by:
-
Roi Dayan authored
If not supported show an error and return instead of trying to offload to the hardware and fail. Fixes: 699e96dd ("net/mlx5e: Support offloading tc double vlan headers match") Reported-by:
-
Moshe Shemesh authored
In case driver sent NACK to firmware on sync reset request, it will get sync reset abort event while it didn't set sync reset requested mode. Thus, on abort sync reset event handler, driver should check reset requested is set before trying to stop sync reset poll. Fixes: 7dd6df32 ("net/mlx5: Handle sync reset abort event") Signed-off-by:
-
Roi Dayan authored
TLS offload is not supported in switchdev mode. Fixes: 7a9fb35e ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode") Signed-off-by:
-
Aya Levin authored
Device supports setting of a single fec mode at a time, enforce this by bitmap_weight == 1. Input from fec command is in u32, avoid cast to unsigned long and use bitmap_from_arr32 to populate bitmap safely. Fixes: 4bd9d507 ("net/mlx5e: Enforce setting of a single FEC mode") Signed-off-by:
-
Joe Perches authored
It looks as if the MAINTAINERS entries for the nfc mailing list should be updated as I just got a "rejected" bounce from the nfc list. ------- Your message to the Linux-nfc mailing-list was rejected for the following reasons: The message is not from a list member ------- Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
- 01 Jun, 2021 10 commits
-
-
David S. Miller authored
Maxim Mikityanskiy says: ==================== Fix use-after-free after the TLS device goes down and up This small series fixes a use-after-free bug in the TLS offload code. The first patch is a preparation for the second one, and the second is the fix itself. v2 changes: Remove unneeded EXPORT_SYMBOL_GPL. ==================== Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Maxim Mikityanskiy authored
When a netdev with active TLS offload goes down, tls_device_down is called to stop the offload and tear down the TLS context. However, the socket stays alive, and it still points to the TLS context, which is now deallocated. If a netdev goes up, while the connection is still active, and the data flow resumes after a number of TCP retransmissions, it will lead to a use-after-free of the TLS context. This commit addresses this bug by keeping the context alive until its normal destruction, and implements the necessary fallbacks, so that the connection can resume in software (non-offloaded) kTLS mode. On the TX side tls_sw_fallback is used to encrypt all packets. The RX side already has all the necessary fallbacks, because receiving non-decrypted packets is supported. The thing needed on the RX side is to block resync requests, which are normally produced after receiving non-decrypted packets. The necessary synchronization is implemented for a graceful teardown: first the fallbacks are deployed, then the driver resources are released (it used to be possible to have a tls_dev_resync after tls_dev_del). A new flag called TLS_RX_DEV_DEGRADED is added to indicate the fallback mode. It's used to skip the RX resync logic completely, as it becomes useless, and some objects may be released (for example, resync_async, which is allocated and freed by the driver). Fixes: e8f69799 ("net/tls: Add generic NIC offload infrastructure") Signed-off-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by:
-
Maxim Mikityanskiy authored
RCU synchronization is guaranteed to finish in finite time, unlike a busy loop that polls a flag. This patch is a preparation for the bugfix in the next patch, where the same synchronize_net() call will also be used to sync with the TX datapath. Signed-off-by:
-
Jiapeng Chong authored
The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'status'. Eliminate the follow smatch warning: drivers/net/ethernet/myricom/myri10ge/myri10ge.c:3818 myri10ge_probe() warn: missing error code 'status'. Reported-by:
-
David S. Miller authored
Xuan Zhuo says: ==================== virtio-net: fix for build_skb() The logic of this piece is really messy. Fortunately, my refactored patch can be completed with a small amount of testing. ==================== Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Xuan Zhuo authored
In the case of merge, the page passed into page_to_skb() may be a head page, not the page where the current data is located. So when trying to get the buf where the data is located, we should get buf based on headroom instead of offset. This patch solves this problem. But if you don't use this patch, the original code can also run, because if the page is not the page of the current data, the calculated tailroom will be less than 0, and will not enter the logic of build_skb() . The significance of this patch is to modify this logical problem, allowing more situations to use build_skb(). Signed-off-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Xuan Zhuo authored
In merge mode, when xdp is enabled, if the headroom of buf is smaller than virtnet_get_headroom(), xdp_linearize_page() will be called but the variable of "headroom" is still 0, which leads to wrong logic after entering page_to_skb(). [ 16.600944] BUG: unable to handle page fault for address: ffffecbfff7b43c8[ 16.602175] #PF: supervisor read access in kernel mode [ 16.603350] #PF: error_code(0x0000) - not-present page [ 16.604200] PGD 0 P4D 0 [ 16.604686] Oops: 0000 [#1] SMP PTI [ 16.605306] CPU: 4 PID: 715 Comm: sh Tainted: G B 5.12.0+ #312 [ 16.606429] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/04 [ 16.608217] RIP: 0010:unmap_page_range+0x947/0xde0 [ 16.609014] Code: 00 00 08 00 48 83 f8 01 45 19 e4 41 f7 d4 41 83 e4 03 e9 a4 fd ff ff e8 b7 63 ed ff 4c 89 e0 48 c1 e0 065 [ 16.611863] RSP: 0018:ffffc90002503c58 EFLAGS: 00010286 [ 16.612720] RAX: ffffecbfff7b43c0 RBX: 00007f19f7203000 RCX: ffffffff812ff359 [ 16.613853] RDX: ffff888107778000 RSI: 0000000000000000 RDI: 0000000000000005 [ 16.614976] RBP: ffffea000425e000 R08: 0000000000000000 R09: 3030303030303030 [ 16.616124] R10: ffffffff82ed7d94 R11: 6637303030302052 R12: 7c00000afffded0f [ 16.617276] R13: 0000000000000001 R14: ffff888119ee7010 R15: 00007f19f7202000 [ 16.618423] FS: 0000000000000000(0000) GS:ffff88842fd00000(0000) knlGS:0000000000000000 [ 16.619738] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.620670] CR2: ffffecbfff7b43c8 CR3: 0000000103220005 CR4: 0000000000370ee0 [ 16.621792] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.622920] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 16.624047] Call Trace: [ 16.624525] ? release_pages+0x24d/0x730 [ 16.625209] unmap_single_vma+0xa9/0x130 [ 16.625885] unmap_vmas+0x76/0xf0 [ 16.626480] exit_mmap+0xa0/0x210 [ 16.627129] mmput+0x67/0x180 [ 16.627673] do_exit+0x3d1/0xf10 [ 16.628259] ? do_user_addr_fault+0x231/0x840 [ 16.629000] do_group_exit+0x53/0xd0 [ 16.629631] __x64_sys_exit_group+0x1d/0x20 [ 16.630354] do_syscall_64+0x3c/0x80 [ 16.630988] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 16.631828] RIP: 0033:0x7f1a043d0191 [ 16.632464] Code: Unable to access opcode bytes at RIP 0x7f1a043d0167. [ 16.633502] RSP: 002b:00007ffe3d993308 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 16.634737] RAX: ffffffffffffffda RBX: 00007f1a044c9490 RCX: 00007f1a043d0191 [ 16.635857] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 [ 16.636986] RBP: 0000000000000000 R08: ffffffffffffff88 R09: 0000000000000001 [ 16.638120] R10: 0000000000000008 R11: 0000000000000246 R12: 00007f1a044c9490 [ 16.639245] R13: 0000000000000001 R14: 00007f1a044c9968 R15: 0000000000000000 [ 16.640408] Modules linked in: [ 16.640958] CR2: ffffecbfff7b43c8 [ 16.641557] ---[ end trace bc4891c6ce46354c ]--- [ 16.642335] RIP: 0010:unmap_page_range+0x947/0xde0 [ 16.643135] Code: 00 00 08 00 48 83 f8 01 45 19 e4 41 f7 d4 41 83 e4 03 e9 a4 fd ff ff e8 b7 63 ed ff 4c 89 e0 48 c1 e0 065 [ 16.645983] RSP: 0018:ffffc90002503c58 EFLAGS: 00010286 [ 16.646845] RAX: ffffecbfff7b43c0 RBX: 00007f19f7203000 RCX: ffffffff812ff359 [ 16.647970] RDX: ffff888107778000 RSI: 0000000000000000 RDI: 0000000000000005 [ 16.649091] RBP: ffffea000425e000 R08: 0000000000000000 R09: 3030303030303030 [ 16.650250] R10: ffffffff82ed7d94 R11: 6637303030302052 R12: 7c00000afffded0f [ 16.651394] R13: 0000000000000001 R14: ffff888119ee7010 R15: 00007f19f7202000 [ 16.652529] FS: 0000000000000000(0000) GS:ffff88842fd00000(0000) knlGS:0000000000000000 [ 16.653887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.654841] CR2: ffffecbfff7b43c8 CR3: 0000000103220005 CR4: 0000000000370ee0 [ 16.655992] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.657150] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 16.658290] Kernel panic - not syncing: Fatal exception [ 16.659613] Kernel Offset: disabled [ 16.660234] ---[ end Kernel panic - not syncing: Fatal exception ]--- Fixes: fb32856b ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom") Signed-off-by:
-
Alexander Aring authored
This patch fixes the in-kernel mark setting by doing an additional sk_dst_reset() which was introduced by commit 50254256 ("sock: Reset dst when changing sk_mark via setsockopt"). The code is now shared to avoid any further suprises when changing the socket mark value. Fixes: 84d1c617 ("net: sock: add sock_set_mark") Reported-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Alexander Aring <aahringo@redhat.com> Signed-off-by:
-
Vladimir Oltean authored
When using sub-VLANs in the range of 1-7, the resulting value from: rx_vid = dsa_8021q_rx_vid_subvlan(ds, port, subvlan); is wrong according to the description from tag_8021q.c: | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | +-----------+-----+-----------------+-----------+-----------------------+ | DIR | SVL | SWITCH_ID | SUBVLAN | PORT | +-----------+-----+-----------------+-----------+-----------------------+ For example, when ds->index == 0, port == 3 and subvlan == 1, dsa_8021q_rx_vid_subvlan() returns 1027, same as it returns for subvlan == 0, but it should have returned 1043. This is because the low portion of the subvlan bits are not masked properly when writing into the 12-bit VLAN value. They are masked into bits 4:3, but they should be masked into bits 5:4. Fixes: 3eaae1d0 ("net: dsa: tag_8021q: support up to 8 VLANs per port using sub-VLANs") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Krzysztof Kozlowski authored
It's possible to trigger NULL pointer dereference by local unprivileged user, when calling getsockname() after failed bind() (e.g. the bind fails because LLCP_SAP_MAX used as SAP): BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 1 PID: 426 Comm: llcp_sock_getna Not tainted 5.13.0-rc2-next-20210521+ #9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1 04/01/2014 Call Trace: llcp_sock_getname+0xb1/0xe0 __sys_getpeername+0x95/0xc0 ? lockdep_hardirqs_on_prepare+0xd5/0x180 ? syscall_enter_from_user_mode+0x1c/0x40 __x64_sys_getpeername+0x11/0x20 do_syscall_64+0x36/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae This can be reproduced with Syzkaller C repro (bind followed by getpeername): https://syzkaller.appspot.com/x/repro.c?x=14def446e00000 Cc: <stable@vger.kernel.org> Fixes: d646960f ("NFC: Initial LLCP support") Reported-by: syzbot+80fb126e7f7d8b1a5914@syzkaller.appspotmail.com Reported-by:
butt3rflyh4ck <butterflyhuangxx@gmail.com> Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210531072138.5219-1-krzysztof.kozlowski@canonical.comSigned-off-by:
-
- 30 May, 2021 1 commit
-
-
Sriranjani P authored
Fixed link does not need mdio bus and in that case mdio_bus_data will not be allocated. Before using mdio_bus_data we should check for NULL. This patch fix the kernel panic due to NULL pointer dereference of mdio_bus_data when it is not allocated. Without this patch we do see following kernel crash caused due to kernel NULL pointer dereference. Call trace: stmmac_dvr_probe+0x3c/0x10b0 dwc_eth_dwmac_probe+0x224/0x378 platform_probe+0x68/0xe0 really_probe+0x130/0x3d8 driver_probe_device+0x68/0xd0 device_driver_attach+0x74/0x80 __driver_attach+0x58/0xf8 bus_for_each_dev+0x7c/0xd8 driver_attach+0x24/0x30 bus_add_driver+0x148/0x1f0 driver_register+0x64/0x120 __platform_driver_register+0x28/0x38 dwc_eth_dwmac_driver_init+0x1c/0x28 do_one_initcall+0x78/0x158 kernel_init_freeable+0x1f0/0x244 kernel_init+0x14/0x118 ret_from_fork+0x10/0x30 Code: f9002bfb 9113e2d9 910e6273 aa0003f7 (f9405c78) ---[ end trace 32d9d41562ddc081 ]--- Fixes: e5e5b771 ("net: stmmac: make in-band AN mode parsing is supported for non-DT") Signed-off-by:
Sriranjani P <sriranjani.p@samsung.com> Signed-off-by:
Pankaj Dubey <pankaj.dubey@samsung.com> Link: https://lore.kernel.org/r/20210528071056.35252-1-sriranjani.p@samsung.comSigned-off-by:
-
- 28 May, 2021 5 commits
-
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Fixes for 5.13 These patches address two issues in MPTCP. Patch 1 fixes a locking issue affecting MPTCP-level retransmissions. Patches 2-4 improve handling of out-of-order packet arrival early in a connection, so it falls back to TCP rather than forcing a reset. Includes a selftest. ==================== Link: https://lore.kernel.org/r/20210527233140.182728-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Paolo Abeni authored
The previous commit noted that we can have fallback scenario due to OoO (or packet drop). Update the self-tests accordingly Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Paolo Abeni authored
When some mapping related errors occurs we close the main MPC subflow with a RST. We should instead fallback gracefully to TCP, and do the reset only for MPJ subflows. Fixes: d22f4988 ("mptcp: process MP_CAPABLE data option") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/192Reported-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Paolo Abeni authored
In subflow_syn_recv_sock() we currently skip options parsing for OoO packet, given that such packets may not carry the relevant MPC option. If the peer generates an MPC+data TSO packet and some of the early segments are lost or get reorder, we server will ignore the peer key, causing transient, unexpected fallback to TCP. The solution is always parsing the incoming MPTCP options, and do the fallback only for in-order packets. This actually cleans the existing code a bit. Fixes: d22f4988 ("mptcp: process MP_CAPABLE data option") Reported-by:
-
Paolo Abeni authored
MPTCP sk_forward_memory handling is a bit special, as such field is protected by the msk socket spin_lock, instead of the plain socket lock. Currently we have a code path updating such field without handling the relevant lock: __mptcp_retrans() -> __mptcp_clean_una_wakeup() Several helpers in __mptcp_clean_una_wakeup() will update sk_forward_alloc, possibly causing such field corruption, as reported by Matthieu. Address the issue providing and using a new variant of blamed function which explicitly acquires the msk spin lock. Fixes: 64b9cea7 ("mptcp: fix spurious retransmissions") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/172Reported-by:
-
- 27 May, 2021 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for net: 1) Fix incorrect sockopts unregistration from error path, from Florian Westphal. 2) A few patches to provide better error reporting when missing kernel netfilter options are missing in .config. 3) Fix dormant table flag updates. 4) Memleak in IPVS when adding service with IP_VS_SVC_F_HASHED flag. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service netfilter: nf_tables: fix table flag updates netfilter: nf_tables: extended netlink error reporting for chain type netfilter: nf_tables: missing error reporting for not selected expressions netfilter: conntrack: unregister ipv4 sockopts on error unwind ==================== Link: https://lore.kernel.org/r/20210527190115.98503-1-pablo@netfilter.orgSigned-off-by:
-
Ariel Levkovich authored
Fix current behavior of skipping template allocation in case the ct action is in zone 0. Skipping the allocation may cause the datapath ct code to ignore the entire ct action with all its attributes (commit, nat) in case the ct action in zone 0 was preceded by a ct clear action. The ct clear action sets the ct_state to untracked and resets the skb->_nfct pointer. Under these conditions and without an allocated ct template, the skb->_nfct pointer will remain NULL which will cause the tc ct action handler to exit without handling commit and nat actions, if such exist. For example, the following rule in OVS dp: recirc_id(0x2),ct_state(+new-est-rel-rpl+trk),ct_label(0/0x1), \ in_port(eth0),actions:ct_clear,ct(commit,nat(src=10.11.0.12)), \ recirc(0x37a) Will result in act_ct skipping the commit and nat actions in zone 0. The change removes the skipping of template allocation for zone 0 and treats it the same as any other zone. Fixes: b57dc7c1 ("net/sched: Introduce action ct") Signed-off-by:
Ariel Levkovich <lariel@nvidia.com> Acked-by:
-
Paul Blakey authored
Currently established connections are not offloaded if the filter has a "ct commit" action. This behavior will not offload connections of the following scenario: $ tc_filter add dev $DEV ingress protocol ip prio 1 flower \ ct_state -trk \ action ct commit action goto chain 1 $ tc_filter add dev $DEV ingress protocol ip chain 1 prio 1 flower \ action mirred egress redirect dev $DEV2 $ tc_filter add dev $DEV2 ingress protocol ip prio 1 flower \ action ct commit action goto chain 1 $ tc_filter add dev $DEV2 ingress protocol ip prio 1 chain 1 flower \ ct_state +trk+est \ action mirred egress redirect dev $DEV Offload established connections, regardless of the commit flag. Fixes: 46475bb2 ("net/sched: act_ct: Software offload of established flows") Reviewed-by:
Oz Shlomo <ozsh@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Acked-by:
-
Parav Pandit authored
Physical port name, port number attributes do not belong to virtual port flavour. When VF or SF virtual ports are registered they incorrectly append "np0" string in the netdevice name of the VF/SF. Before this fix, VF netdevice name were ens2f0np0v0, ens2f0np0v1 for VF 0 and 1 respectively. After the fix, they are ens2f0v0, ens2f0v1. With this fix, reading /sys/class/net/ens2f0v0/phys_port_name returns -EOPNOTSUPP. Also devlink port show example for 2 VFs on one PF to ensure that any physical port attributes are not exposed. $ devlink port show pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false pci/0000:06:00.3/196608: type eth netdev ens2f0v0 flavour virtual splittable false pci/0000:06:00.4/262144: type eth netdev ens2f0v1 flavour virtual splittable false This change introduces a netdevice name change on systemd/udev version 245 and higher which honors phys_port_name sysfs file for generation of netdevice name. This also aligns to phys_port_name usage which is limited to switchdev ports as described in [1]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/tree/Documentation/networking/switchdev.rst Fixes: acf1ee44 ("devlink: Introduce devlink port flavour virtual") Signed-off-by:
Parav Pandit <parav@nvidia.com> Reviewed-by:
-
Julian Anastasov authored
syzbot reported memory leak [1] when adding service with HASHED flag. We should ignore this flag both from sockopt and netlink provided data, otherwise the service is not hashed and not visible while releasing resources. [1] BUG: memory leak unreferenced object 0xffff888115227800 (size 512): comm "syz-executor263", pid 8658, jiffies 4294951882 (age 12.560s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff83977188>] kmalloc include/linux/slab.h:556 [inline] [<ffffffff83977188>] kzalloc include/linux/slab.h:686 [inline] [<ffffffff83977188>] ip_vs_add_service+0x598/0x7c0 net/netfilter/ipvs/ip_vs_ctl.c:1343 [<ffffffff8397d770>] do_ip_vs_set_ctl+0x810/0xa40 net/netfilter/ipvs/ip_vs_ctl.c:2570 [<ffffffff838449a8>] nf_setsockopt+0x68/0xa0 net/netfilter/nf_sockopt.c:101 [<ffffffff839ae4e9>] ip_setsockopt+0x259/0x1ff0 net/ipv4/ip_sockglue.c:1435 [<ffffffff839fa03c>] raw_setsockopt+0x18c/0x1b0 net/ipv4/raw.c:857 [<ffffffff83691f20>] __sys_setsockopt+0x1b0/0x360 net/socket.c:2117 [<ffffffff836920f2>] __do_sys_setsockopt net/socket.c:2128 [inline] [<ffffffff836920f2>] __se_sys_setsockopt net/socket.c:2125 [inline] [<ffffffff836920f2>] __x64_sys_setsockopt+0x22/0x30 net/socket.c:2125 [<ffffffff84350efa>] do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47 [<ffffffff84400068>] entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-and-tested-by: syzbot+e562383183e4b1766930@syzkaller.appspotmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:Julian Anastasov <ja@ssi.bg> Reviewed-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.13-rc4, including fixes from bpf, netfilter, can and wireless trees. Notably including fixes for the recently announced "FragAttacks" WiFi vulnerabilities. Rather large batch, touching some core parts of the stack, too, but nothing hair-raising. Current release - regressions: - tipc: make node link identity publish thread safe - dsa: felix: re-enable TAS guard band mode - stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid() - stmmac: fix system hang if change mac address after interface ifdown Current release - new code bugs: - mptcp: avoid OOB access in setsockopt() - bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers - ethtool: stats: fix a copy-paste error - init correct array size Previous releases - regressions: - sched: fix packet stuck problem for lockless qdisc - net: really orphan skbs tied to closing sk - mlx4: fix EEPROM dump support - bpf: fix alu32 const subreg bound tracking on bitwise operations - bpf: fix mask direction swap upon off reg sign change - bpf, offload: reorder offload callback 'prepare' in verifier - stmmac: Fix MAC WoL not working if PHY does not support WoL - packetmmap: fix only tx timestamp on request - tipc: skb_linearize the head skb when reassembling msgs Previous releases - always broken: - mac80211: address recent "FragAttacks" vulnerabilities - mac80211: do not accept/forward invalid EAPOL frames - mptcp: avoid potential error message floods - bpf, ringbuf: deny reserve of buffers larger than ringbuf to prevent out of buffer writes - bpf: forbid trampoline attach for functions with variable arguments - bpf: add deny list of functions to prevent inf recursion of tracing programs - tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT - can: isotp: prevent race between isotp_bind() and isotp_setsockopt() - netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version Misc: - bpf: add kconfig knob for disabling unpriv bpf by default" * tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits) net: phy: Document phydev::dev_flags bits allocation mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer mptcp: avoid error message on infinite mapping mptcp: drop unconditional pr_warn on bad opt mptcp: avoid OOB access in setsockopt() nfp: update maintainer and mailing list addresses net: mvpp2: add buffer header handling in RX bnx2x: Fix missing error code in bnx2x_iov_init_one() net: zero-initialize tc skb extension on allocation net: hns: Fix kernel-doc sctp: fix the proc_handler for sysctl encap_port sctp: add the missing setting for asoc encap_port bpf, selftests: Adjust few selftest result_unpriv outcomes bpf: No need to simulate speculative domain for immediates bpf: Fix mask direction swap upon off reg sign change bpf: Wrap aux data inside bpf_sanitize_info container bpf: Fix BPF_LSM kconfig symbol dependency selftests/bpf: Add test for l3 use of bpf_redirect_peer bpftool: Add sock_release help info for cgroup attach/prog load command net: dsa: microchip: enable phy errata workaround on 9567 ...
-
