- 15 Dec, 2023 33 commits
-
-
Bharat Bhushan authored
This patch fixes following cleanup issues: - Missing instruction queue free on cleanup. This will lead to memory leak. - lfs->lfs_num is set to zero before cleanup, which will lead to improper cleanup. Signed-off-by:
Bharat Bhushan <bbhushan2@marvell.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Lukasz Stelmach <l.stelmach@samsung.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Christophe JAILLET authored
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Chenghai Huang authored
Add the printf of an error message and optimized the handling process of ret. Signed-off-by:
Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by:
-
Chenghai Huang authored
Deleted a dbg function because this function has the risk of address leakage. In addition, this function is only used for debugging in the early stage and is not required in the future. Signed-off-by:
-
Herbert Xu authored
Disallow registration of two algorithms with identical driver names. Cc: <stable@vger.kernel.org> Reported-by:
Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by:
-
Tom Zanussi authored
Add a load_device_defaults() function pointer to struct idxd_driver_data, which if defined, will be called when an idxd device is probed and will allow the idxd device to be configured with default values. The load_device_defaults() function is passed an idxd device to work with to set specific device attributes. Also add a load_device_defaults() implementation IAA devices; future patches would add default functions for other device types such as DSA. The way idxd device probing works, if the device configuration is valid at that point e.g. at least one workqueue and engine is properly configured then the device will be enabled and ready to go. The IAA implementation, idxd_load_iaa_device_defaults(), configures a single workqueue (wq0) for each device with the following default values: mode "dedicated" threshold 0 size Total WQ Size from WQCAP priority 10 type IDXD_WQT_KERNEL group 0 name "iaa_crypto" driver_name "crypto" Note that this now adds another configuration step for any users that want to configure their own devices/workqueus with something different in that they'll first need to disable (in the case of IAA) wq0 and the device itself before they can set their own attributes and re-enable, since they've been already been auto-enabled. Note also that in order for the new configuration to be applied to the deflate-iaa crypto algorithm the iaa_crypto module needs to unregister the old version, which is accomplished by removing the iaa_crypto module, and re-registering it with the new configuration by reinserting the iaa_crypto module. Signed-off-by:Tom Zanussi <tom.zanussi@linux.intel.com> Reviewed-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
-
Tom Zanussi authored
Add support for optional debugfs statistics support for the IAA Compression Accelerator. This is enabled by the kernel config item: CRYPTO_DEV_IAA_CRYPTO_STATS When enabled, the IAA crypto driver will generate statistics which can be accessed at /sys/kernel/debug/iaa-crypto/. See Documentation/driver-api/crypto/iax/iax-crypto.rst for details. Signed-off-by:
-
Tom Zanussi authored
The existing iaa crypto async support provides an implementation that satisfies the interface but does so in a synchronous manner - it fills and submits the IDXD descriptor and then waits for it to complete before returning. This isn't a problem at the moment, since all existing callers (e.g. zswap) wrap any asynchronous callees in a synchronous wrapper anyway. This change makes the iaa crypto async implementation truly asynchronous: it fills and submits the IDXD descriptor, then returns immediately with -EINPROGRESS. It also sets the descriptor's 'request completion irq' bit and sets up a callback with the IDXD driver which is called when the operation completes and the irq fires. The existing callers such as zswap use synchronous wrappers to deal with -EINPROGRESS and so work as expected without any changes. This mode can be enabled by writing 'async_irq' to the sync_mode iaa_crypto driver attribute: echo async_irq > /sys/bus/dsa/drivers/crypto/sync_mode Async mode without interrupts (caller must poll) can be enabled by writing 'async' to it: echo async > /sys/bus/dsa/drivers/crypto/sync_mode The default sync mode can be enabled by writing 'sync' to it: echo sync > /sys/bus/dsa/drivers/crypto/sync_mode The sync_mode value setting at the time the IAA algorithms are registered is captured in each algorithm's crypto_ctx and used for all compresses and decompresses when using a given algorithm. Signed-off-by:
-
Tom Zanussi authored
This patch registers the deflate-iaa deflate compression algorithm and hooks it up to the IAA hardware using the 'fixed' compression mode introduced in the previous patch. Because the IAA hardware has a 4k history-window limitation, only buffers <= 4k, or that have been compressed using a <= 4k history window, are technically compliant with the deflate spec, which allows for a window of up to 32k. Because of this limitation, the IAA fixed mode deflate algorithm is given its own algorithm name, 'deflate-iaa'. With this change, the deflate-iaa crypto algorithm is registered and operational, and compression and decompression operations are fully enabled following the successful binding of the first IAA workqueue to the iaa_crypto sub-driver. when there are no IAA workqueues bound to the driver, the IAA crypto algorithm can be unregistered by removing the module. A new iaa_crypto 'verify_compress' driver attribute is also added, allowing the user to toggle compression verification. If set, each compress will be internally decompressed and the contents verified, returning error codes if unsuccessful. This can be toggled with 0/1: echo 0 > /sys/bus/dsa/drivers/crypto/verify_compress The default setting is '1' - verify all compresses. The verify_compress value setting at the time the algorithm is registered is captured in the algorithm's crypto_ctx and used for all compresses when using the algorithm. [ Based on work originally by George Powley, Jing Lin and Kyung Min Park ] Signed-off-by:
-
Tom Zanussi authored
Define an in-kernel API for adding and removing compression modes, which can be used by kernel modules or other kernel code that implements IAA compression modes. Also add a separate file, iaa_crypto_comp_fixed.c, containing huffman tables generated for the IAA 'fixed' compression mode. Future compression modes can be added in a similar fashion. One or more crypto compression algorithms will be created for each compression mode, each of which can be selected as the compression algorithm to be used by a particular facility. Signed-off-by:
-
Tom Zanussi authored
The iaa compression/decompression algorithms in later patches need a way to retrieve an appropriate IAA workqueue depending on how close the associated IAA device is to the current cpu. For this purpose, add a per-cpu array of workqueues such that an appropriate workqueue can be retrieved by simply accessing the per-cpu array. Whenever a new workqueue is bound to or unbound from the iaa_crypto driver, the available workqueues are 'rebalanced' such that work submitted from a particular CPU is given to the most appropriate workqueue available. There currently isn't any way for the user to tweak the way this is done internally - if necessary, knobs can be added later for that purpose. Current best practice is to configure and bind at least one workqueue for each IAA device, but as long as there is at least one workqueue configured and bound to any IAA device in the system, the iaa_crypto driver will work, albeit most likely not as efficiently. [ Based on work originally by George Powley, Jing Lin and Kyung Min Park ] Signed-off-by:
-
Tom Zanussi authored
The Intel Analytics Accelerator (IAA) is a hardware accelerator that provides very high thoughput compression/decompression compatible with the DEFLATE compression standard described in RFC 1951, which is the compression/decompression algorithm exported by this module. Users can select IAA compress/decompress acceleration by specifying one of the deflate-iaa* algorithms as the compression algorithm to use by whatever facility allows asynchronous compression algorithms to be selected. For example, zswap can select the IAA fixed deflate algorithm 'deflate-iaa' via: # echo deflate-iaa > /sys/module/zswap/parameters/compressor This patch adds iaa_crypto as an idxd sub-driver and tracks iaa devices and workqueues as they are probed or removed. [ Based on work originally by George Powley, Jing Lin and Kyung Min Park ] Signed-off-by:
-
Tom Zanussi authored
Because the IAA Compression Accelerator requires significant user setup in order to be used properly, this adds documentation on the iaa_crypto driver including setup, usage, and examples. Signed-off-by:
-
Tom Zanussi authored
Create a lightweight callback interface to allow idxd sub-drivers to be notified when work sent to idxd wqs has completed. For a sub-driver to be notified of work completion, it needs to: - Set the descriptor's 'Request Completion Interrupt' (IDXD_OP_FLAG_RCI) - Set the sub-driver desc_complete() callback when registering the sub-driver e.g.: struct idxd_device_driver my_drv = { .probe = my_probe, .desc_complete = my_complete, } - Set the sub-driver-specific context in the sub-driver's descriptor e.g: idxd_desc->crypto.req = req; idxd_desc->crypto.tfm = tfm; idxd_desc->crypto.src_addr = src_addr; idxd_desc->crypto.dst_addr = dst_addr; When the work completes and the completion irq fires, idxd will invoke the desc_complete() callback with pointers to the descriptor, context, and completion_type. Signed-off-by:Fenghua Yu <fenghua.yu@intel.com> Acked-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Tom Zanussi authored
Add the accessors idxd_wq_set_private() and idxd_wq_get_private() allowing users to set and retrieve a private void * associated with an idxd_wq. The private data is stored in the idxd_dev.conf_dev associated with each idxd_wq. Signed-off-by:
-
Tom Zanussi authored
To allow idxd sub-drivers to access the wq resource management functions, export them. Signed-off-by:
-
Tom Zanussi authored
To allow idxd sub-drivers to access the descriptor management functions, export them. Signed-off-by:
-
Tom Zanussi authored
Rename drv_enable_wq and drv_disable_wq to idxd_drv_enable_wq and idxd_drv_disable_wq respectively, so that they're no longer too generic to be exported. This also matches existing naming within the idxd driver. And to allow idxd sub-drivers to enable and disable wqs, export them. Signed-off-by:
-
Dave Jiang authored
Add support to allow an external driver to be registered to the dsa_bus_type and also auto-loaded. Signed-off-by:
-
Jia Jie Ho authored
Current dev_err_probe will return 0 instead of proper error code if driver failed to get irq number. Fix the return code. Signed-off-by:
Jia Jie Ho <jiajie.ho@starfivetech.com> Signed-off-by:
-
Jia Jie Ho authored
NULL check before kfree_sensitive function is not needed. Signed-off-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311301702.LxswfETY-lkp@intel.com/Signed-off-by:
-
- 08 Dec, 2023 7 commits
-
-
Herbert Xu authored
Unlike algif_aead which is always issued in one go (thus limiting the maximum size of the request), algif_skcipher has always allowed unlimited input data by cutting them up as necessary and feeding the fragments to the underlying algorithm one at a time. However, because of deficiencies in the API, this has been broken for most stream ciphers such as arc4 or chacha. This is because they have an internal state in addition to the IV that must be preserved in order to continue processing. Fix this by using the new skcipher state API. Signed-off-by: -
Herbert Xu authored
The arc4 algorithm has always had internal state. It's been buggy from day one in that the state has been stored in the shared tfm object. That means two users sharing the same tfm will end up affecting each other's output, or worse, they may end up with the same output. Fix this by declaring an internal state and storing the state there instead of within the tfm context. Signed-off-by: -
Herbert Xu authored
This patch adds code to the skcipher/lskcipher API to make use of the internal state if present. In particular, the skcipher lskcipher wrapper will allocate a buffer for the IV/state and feed that to the underlying lskcipher algorithm. Signed-off-by: -
Herbert Xu authored
Unlike chaining modes such as CBC, stream ciphers other than CTR usually hold an internal state that must be preserved if the operation is to be done piecemeal. This has not been represented in the API, resulting in the inability to split up stream cipher operations. This patch adds the basic representation of an internal state to skcipher and lskcipher. In the interest of backwards compatibility, the default has been set such that existing users are assumed to be operating in one go as opposed to piecemeal. With the new API, each lskcipher/skcipher algorithm has a new attribute called statesize. For skcipher, this is the size of the buffer that can be exported or imported similar to ahash. For lskcipher, instead of providing a buffer of ivsize, the user now has to provide a buffer of ivsize + statesize. Each skcipher operation is assumed to be final as they are now, but this may be overridden with a request flag. When the override occurs, the user may then export the partial state and reimport it later. For lskcipher operations this is reversed. All operations are not final and the state will be exported unless the FINAL bit is set. However, the CONT bit still has to be set for the state to be used. Signed-off-by: -
Herbert Xu authored
Remove the unused algorithms CFB/OFB. Signed-off-by: -
Herbert Xu authored
Remove test vectors for CFB/OFB. Signed-off-by: -
Herbert Xu authored
Remove tests for CFB/OFB. Signed-off-by:
-
