- 25 Aug, 2017 14 commits
-
-
Takashi Iwai authored
commit 0f174b35 upstream. C-Media devices (at least some models) mute the playback stream when volumes are set to the minimum value. But this isn't informed via TLV and the user-space, typically PulseAudio, gets confused as if it's still played in a low volume. This patch adds the new flag, min_mute, to struct usb_mixer_elem_info for indicating that the mixer element is with the minimum-mute volume. This flag is set for known C-Media devices in snd_usb_mixer_fu_apply_quirk() in turn. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196669Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit a8e800fe upstream. A Senheisser headset requires the typical sample-rate quirk for avoiding spurious errors from inquiring the current sample rate like: usb 1-1: 2:1: cannot get freq at ep 0x4 usb 1-1: 3:1: cannot get freq at ep 0x83 The USB ID 1395:740a has to be added to the entries in snd_usb_get_sample_rate_quirk(). Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1052580Signed-off-by:
-
Daniel Mentz authored
commit 7e1d90f6 upstream. commit 4842e98f ("ALSA: seq: Fix race at creating a queue") attempted to fix a race reported by syzkaller. That fix has been described as follows: " When a sequencer queue is created in snd_seq_queue_alloc(),it adds the new queue element to the public list before referencing it. Thus the queue might be deleted before the call of snd_seq_queue_use(), and it results in the use-after-free error, as spotted by syzkaller. The fix is to reference the queue object at the right time. " Even with that fix in place, syzkaller reported a use-after-free error. It specifically pointed to the last instruction "return q->queue" in snd_seq_queue_alloc(). The pointer q is being used after kfree() has been called on it. It turned out that there is still a small window where a race can happen. The window opens at snd_seq_ioctl_create_queue()->snd_seq_queue_alloc()->queue_list_add() and closes at snd_seq_ioctl_create_queue()->queueptr()->snd_use_lock_use(). Between these two calls, a different thread could delete the queue and possibly re-create a different queue in the same location in queue_list. This change prevents this situation by calling snd_use_lock_use() from snd_seq_queue_alloc() prior to calling queue_list_add(). It is then the caller's responsibility to call snd_use_lock_free(&q->use_lock). Fixes: 4842e98f ("ALSA: seq: Fix race at creating a queue") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Daniel Mentz <danielmentz@google.com> Signed-off-by:
-
Shaohua Li authored
commit afc1f55c upstream. ->safemode should be triggered by mdadm for external metadaa array, otherwise array's state confuses mdadm. Fixes: 33182d15(md: always clear ->safemode when md_check_recovery gets the mddev lock.) Cc: NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
NeilBrown authored
commit 33182d15 upstream. If ->safemode == 1, md_check_recovery() will try to get the mddev lock and perform various other checks. If mddev->in_sync is zero, it will call set_in_sync, and clear ->safemode. However if mddev->in_sync is not zero, ->safemode will not be cleared. When md_check_recovery() drops the mddev lock, the thread is woken up again. Normally it would just check if there was anything else to do, find nothing, and go to sleep. However as ->safemode was not cleared, it will take the mddev lock again, then wake itself up when unlocking. This results in an infinite loop, repeatedly calling md_check_recovery(), which RCU or the soft-lockup detector will eventually complain about. Prior to commit 4ad23a97 ("MD: use per-cpu counter for writes_pending"), safemode would only be set to one when the writes_pending counter reached zero, and would be cleared again when writes_pending is incremented. Since that patch, safemode is set more freely, but is not reliably cleared. So in md_check_recovery() clear ->safemode before checking ->in_sync. Fixes: 4ad23a97 ("MD: use per-cpu counter for writes_pending") Reported-by:
Dominik Brodowski <linux@dominikbrodowski.net> Reported-by:
David R <david@unsolicited.net> Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
NeilBrown authored
commit 81fe48e9 upstream. md_write_start() needs to clear the in_sync flag is it is set, or if there might be a race with set_in_sync() such that the later will set it very soon. In the later case it is sufficient to take the spinlock to synchronize with set_in_sync(), and then set the flag if needed. The current test is incorrect. It should be: if "flag is set" or "race is possible" "flag is set" is trivially "mddev->in_sync". "race is possible" should be tested by "mddev->sync_checkers". If sync_checkers is 0, then there can be no race. set_in_sync() will wait in percpu_ref_switch_to_atomic_sync() for an RCU grace period, and as md_write_start() holds the rcu_read_lock(), set_in_sync() will be sure ot see the update to writes_pending. If sync_checkers is > 0, there could be race. If md_write_start() happened entirely between if (!mddev->in_sync && percpu_ref_is_zero(&mddev->writes_pending)) { and mddev->in_sync = 1; in set_in_sync(), then it would not see that is_sync had been set, and set_in_sync() would not see that writes_pending had been incremented. This bug means that in_sync is sometimes not set when it should be. Consequently there is a small chance that the array will be marked as "clean" when in fact it is inconsistent. Fixes: 4ad23a97 ("MD: use per-cpu counter for writes_pending") Signed-off-by:
-
KT Liao authored
commit 76988690 upstream. Add 2 new IDs (ELAN0609 and ELAN060B) to the list of ACPI IDs that should be handled by the driver. Signed-off-by:
KT Liao <kt.liao@emc.com.tw> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Kai-Heng Feng authored
commit 1874064e upstream. Similar to commit 722c5ac7 ("Input: elan_i2c - add ELAN0605 to the ACPI table"), ELAN0608 should be handled by elan_i2c. This touchpad can be found in Lenovo ideapad 320-14IKB. BugLink: https://bugs.launchpad.net/bugs/1708852Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Chunming Zhou authored
commit 7a7c286d upstream. update the list first to avoid redundant checks. Signed-off-by:
Chunming Zhou <David1.Zhou@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Chris Wilson authored
commit a0125a93 upstream. As we may have just bound the renderstate into the GGTT for execution, we need to ensure that the GTT TLB are also flushed. On snb-gt2, this would cause a random GPU hang at the start of a new context (e.g. boot) and on snb-gt1, it was causing the renderstate batch to take ~10s. It was the GPU hang that revealed the truth, as the CS gleefully executed beyond the end of the golden renderstate batch, a good indicator for a GTT TLB miss. Fixes: 20fe17aa ("drm/i915: Remove redundant TLB invalidate on switching contexts") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170808131904.1385-1-chris@chris-wilson.co.ukReviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.12-rc1+ (cherry picked from commit 802673d6) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
megha.dey@linux.intel.com authored
commit 8861249c upstream. It was reported that the sha1 AVX2 function(sha1_transform_avx2) is reading ahead beyond its intended data, and causing a crash if the next block is beyond page boundary: http://marc.info/?l=linux-crypto-vger&m=149373371023377 This patch makes sure that there is no overflow for any buffer length. It passes the tests written by Jan Stancek that revealed this problem: https://github.com/jstancek/sha1-avx2-crash I have re-enabled sha1-avx2 by reverting commit b82ce244 Fixes: b82ce244 ("crypto: sha1-ssse3 - Disable avx2") Originally-by:
Ilya Albrekht <ilya.albrekht@intel.com> Tested-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Megha Dey <megha.dey@linux.intel.com> Reported-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
commit 28389575 upstream. In commit 0f987e25, the source processing has been moved in front of the destination processing, but the error handling path has not been modified accordingly. Free resources in the correct order to avoid some leaks. Fixes: 0f987e25 ("crypto: ixp4xx - Fix false lastlen uninitialised warning") Reported-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Thomas Bogendoerfer authored
commit 40981160 upstream. For 64bit kernels the lmmio_space_offset of the host bridge window isn't set correctly on systems with dino/cujo PCI host bridges. This leads to not assigned memory bars and failing drivers, which need to use these bars. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Jan Kara authored
commit d76036ab upstream. audit_remove_watch_rule() drops watch's reference to parent but then continues to work with it. That is not safe as parent can get freed once we drop our reference. The following is a trivial reproducer: mount -o loop image /mnt touch /mnt/file auditctl -w /mnt/file -p wax umount /mnt auditctl -D <crash in fsnotify_destroy_mark()> Grab our own reference in audit_remove_watch_rule() earlier to make sure mark does not get freed under us. Reported-by:
Tony Jones <tonyj@suse.de> Signed-off-by:
Jan Kara <jack@suse.cz> Tested-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
- 16 Aug, 2017 26 commits
-
-
Greg Kroah-Hartman authored
-
Michael Neuling authored
commit 64ebb9a2 upstream. The P9 PVR bits 12-15 don't indicate a revision but instead different chip configurations. From BookIV we have: Bits Configuration 0 : Scale out 12 cores 1 : Scale out 24 cores 2 : Scale up 12 cores 3 : Scale up 24 cores DD1 doesn't use this but DD2 does. Linux will mostly use the "Scale out 24 core" configuration (ie. SMT4 not SMT8) which results in a PVR of 0x004e1200. The reported revision in /proc/cpuinfo is hence reported incorrectly as "18.0". This patch fixes this to mask off only the relevant bits for the major revision (ie. bits 8-11) for POWER9. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by:
-
Steven J. Hill authored
commit 81a67e52 upstream. Commit "MIPS: Octeon: Remove unused L2C types and macros." broke the the EDAC driver. Bring back 'cvmx-l2d-defs.h' file and the missing types for L2C. Fixes: 15f68479 ("MIPS: Octeon: Remove unused L2C types and macros.") Fixes: 15f68479 ("MIPS: Octeon: Remove unused L2C types and macros.") Signed-off-by:
Steven J. Hill <steven.hill@cavium.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16906/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Paul Burton authored
commit ae5b0675 upstream. Commit 296e46db ("MIPS: Don't unnecessarily include kmalloc.h into <asm/cache.h>.") claimed that the inclusion of the machine's kmalloc.h from asm/cache.h is unnecessary, but this is not true. Without including kmalloc.h we don't get a definition for ARCH_DMA_MINALIGN, which means we no longer suitably align DMA. Further to this the definition of ARCH_KMALLOC_MINALIGN provided by linux/slab.h ends up being set to the alignment of an unsigned long long value rather than to ARCH_DMA_MINALIGN, which means that buffers allocated using kmalloc may no longer be safely aligned for use with DMA. Fix this by re-adding the include of kmalloc.h in asm/cache.h. This reverts commit 296e46db ("MIPS: Don't unnecessarily include kmalloc.h into <asm/cache.h>.") Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Fixes: 296e46db ("MIPS: Don't unnecessarily include kmalloc.h into <asm/cache.h>.") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16895/Signed-off-by:
-
Maciej W. Rozycki authored
commit 68fe5568 upstream. Fix a commit 3021773c ("MIPS: DEC: Avoid la pseudo-instruction in delay slots") regression and remove assembly errors: arch/mips/dec/int-handler.S: Assembler messages: arch/mips/dec/int-handler.S:162: Error: Macro used $at after ".set noat" arch/mips/dec/int-handler.S:163: Error: Macro used $at after ".set noat" arch/mips/dec/int-handler.S:229: Error: Macro used $at after ".set noat" arch/mips/dec/int-handler.S:230: Error: Macro used $at after ".set noat" triggering with with the CPU_DADDI_WORKAROUNDS option set and the DADDIU instruction. This is because with that option in place the instruction becomes a macro, which expands to an LI/DADDU (or actually ADDIU/DADDU) sequence that uses $at as a temporary register. With CPU_DADDI_WORKAROUNDS we only support `-msym32' compilation though, and this is already enforced in arch/mips/Makefile, so choose the 32-bit expansion variant for the supported configurations and then replace the 64-bit variant with #error just in case. Fixes: 3021773c ("MIPS: DEC: Avoid la pseudo-instruction in delay slots") Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16893/Signed-off-by:
-
Neil Armstrong authored
commit aa955695 upstream. GPIODV_18 entry was missing in the original driver push. Fixes: 0f15f500 ("pinctrl: meson: Add GXL pinctrl definitions") Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Neil Armstrong authored
commit 34e61801 upstream. GPIODV_18 entry was missing in the original driver push. Fixes: 468c234f ("pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC") Signed-off-by:
-
Thomas Gleixner authored
commit 3fa53ec2 upstream. The irq chip callbacks irq_request/release_resources() have absolutely no business with masking and unmasking the irq. The core code unmasks the interrupt after complete setup and masks it before invoking irq_release_resources(). The unmask is actually harmful as it happens before the interrupt is completely initialized in __setup_irq(). Remove it. Fixes: f6a8249f ("pinctrl: exynos: Lock GPIOs as interrupts when used as EINTs") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Kukjin Kim <kgene@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-gpio@vger.kernel.org Acked-by:
Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by:
-
Masahiro Yamada authored
commit 1bd303dc upstream. The pingroups dump of debugfs hits WARN_ON() in pinctrl_groups_show(). Filling non-existing ports with '-1' turned out a bad idea. Fixes: 336306ee ("pinctrl: uniphier: add UniPhier PH1-LD20 pinctrl driver") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Masahiro Yamada authored
commit 9592bc25 upstream. The pingroups dump of debugfs hits WARN_ON() in pinctrl_groups_show(). Filling non-existing ports with '-1' turned out a bad idea. Fixes: 70f2f9c4 ("pinctrl: uniphier: add UniPhier PH1-LD11 pinctrl driver") Signed-off-by:
-
Andy Shevchenko authored
commit 5d996132 upstream. UART pin lists consist GPIO numbers which is simply wrong. Replace it by pin numbers. Fixes: 4e80c8f5 ("pinctrl: intel: Add Intel Merrifield pin controller support") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Icenowy Zheng authored
commit d81ece74 upstream. The PH16 pin has a function with mux id 0x5, which is the DET pin of the "sim" (smart card reader) IP block. This function is missing in old versions of A10/A20 SoCs' datasheets and user manuals, so it's also missing in the old drivers. The newest A10 Datasheet V1.70 and A20 Datasheet V1.41 contain this pin function, and it's discovered during implementing R40 pinctrl driver. Add it to the driver. As we now merged A20 pinctrl driver to the A10 one, we need to only fix the A10 driver now. Fixes: f2821b1c ("pinctrl: sunxi: Move Allwinner A10 pinctrl driver to a driver of its own") Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Andy Shevchenko authored
commit 2d80bd3f upstream. Add one more model to the Chromebook DMI quirk to make it working again. Link: https://bugzilla.kernel.org/show_bug.cgi?id=194945 Fixes: 2a8209fa ("pinctrl: cherryview: Extend the Chromebook DMI quirk to Intel_Strago systems") Reported-by: mail@abhishek.geek.nz Signed-off-by:
-
Christoph Hellwig authored
commit 8a9d6e96 upstream. The blocklayout code does not compile cleanly for a 32-bit sector_t, and also has no reliable checks for devices sizes, which makes it unsafe to use with a kernel that doesn't support large block devices. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reported-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Stefan-Gabriel Mirea authored
commit d466d3c1 upstream. In order to select the alternate voltage reference pair (VALTH/VALTL), the right value for the REFSEL field in the ADCx_CFG register is "01", leading to 0x800 as register mask. See section 8.2.6.4 in the reference manual[1]. [1] http://www.nxp.com/docs/en/reference-manual/VFXXXRM.pdf Fixes: a7754276 ("iio:adc:imx: add Freescale Vybrid vf610 adc driver") Signed-off-by:
Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Marc Zyngier authored
commit 8466489e upstream. The Renesas uPD72020x XHCI controller seems to suffer from a really annoying bug, where it may retain some of its DMA programming across a XHCI reset, and despite the driver correctly programming new DMA addresses. This is visible if the device has been using 64-bit DMA addresses, and is then switched to using 32-bit DMA addresses. The top 32 bits of the address (now zero) are ignored are replaced by the 32 bits from the *previous* programming. Sticking with 64-bit DMA always works, but doesn't seem very appropriate. A PCI reset of the device restores the normal functionality, which is done at probe time. Unfortunately, this has to be done before any quirk has been discovered, hence the intrusive nature of the fix. Tested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Marc Zyngier authored
commit a477b9cd upstream. The implementation of PCI workarounds may require that the device is reset from its probe function. This implies that the PCI device lock is already held, and makes calling pci_reset_function() impossible (since it will itself try to take that lock). Add pci_reset_function_locked(), which is the equivalent of pci_reset_function(), except that it requires the PCI device lock to be already held by the caller. Tested-by:
-
Christoph Hellwig authored
commit 52354b9d upstream. Implement the reset probing / reset chain directly in __pci_probe_reset_function() and __pci_reset_function_locked() respectively. Link: http://lkml.kernel.org/r/20170601111039.8913-4-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
commit b014e96d upstream. Every method in struct device_driver or structures derived from it like struct pci_driver MUST provide exclusion vs the driver's ->remove() method, usually by using device_lock(). Protect use of pci_error_handlers->reset_notify() by holding the device lock while calling it. Note: - pci_dev_lock() calls device_lock() in addition to blocking user-space config accesses. - pci_err_handlers->reset_notify() is used inside pci_dev_save_and_disable() and pci_dev_restore(). We could hold the device lock directly in pci_reset_notify(), but we expand the region since we have several calls following each other. Without this, ->reset_notify() may race with ->remove() calls, which can be easily triggered in NVMe. [bhelgaas: changelog, add pci_reset_notify() comment] [bhelgaas: fold in fix from Dan Carpenter <dan.carpenter@oracle.com>: http://lkml.kernel.org/r/20170701135323.x5vaj4e2wcs2mcro@mwanda] Link: http://lkml.kernel.org/r/20170601111039.8913-2-hch@lst.deReported-by:
Rakesh Pandit <rakesh@tuxera.com> Tested-by:
-
Sandeep Singh authored
commit e788787e upstream. Certain HP keyboards would keep inputting a character automatically which is the wake-up key after S3 resume On some AMD platforms USB host fails to respond (by holding resume-K) to USB device (an HP keyboard) resume request within 1ms (TURSM) and ensures that resume is signaled for at least 20 ms (TDRSMDN), which is defined in USB 2.0 spec. The result is that the keyboard is out of function. In SNPS USB design, the host responds to the resume request only after system gets back to S0 and the host gets to functional after the internal HW restore operation that is more than 1 second after the initial resume request from the USB device. As a workaround for specific keyboard ID(HP Keyboards), applying port reset after resume when the keyboard is plugged in. Signed-off-by:
Sandeep Singh <Sandeep.Singh@amd.com> Signed-off-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com> Reviewed-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Kai-Heng Feng authored
commit 7496cfe5 upstream. Moshi USB to Ethernet Adapter internally uses a Genesys Logic hub to connect to Realtek r8153. The Realtek r8153 ethernet does not work on the internal hub, no-lpm quirk can make it work. Since another r8153 dongle at my hand does not have the issue, so add the quirk to the Genesys Logic hub instead. Signed-off-by:
-
Bin Liu authored
commit 2eac1362 upstream. While unlink an urb, if the urb has been programmed in the controller, the controller driver might do some hw related actions to tear down the urb. Currently usb_hcd_flush_endpoint() passes each urb from the head of the endpoint's urb_list to the controller driver, which could make the controller driver think each urb has been programmed and take the unnecessary actions for each urb. This patch changes the behavior in usb_hcd_flush_endpoint() to pass the urbs from the tail of the list, to avoid any unnecessary actions in an controller driver. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Alan Stern authored
commit 94c43b98 upstream. Some buggy USB disk adapters disconnect and reconnect multiple times during the enumeration procedure. This may lead to a device connecting at full speed instead of high speed, because when the USB stack sees that a device isn't able to enumerate at high speed, it tries to hand the connection over to a full-speed companion controller. The logic for doing this is careful to check that the device is still connected. But this check is inadequate if the device disconnects and reconnects before the check is done. The symptom is that a device works, but much more slowly than it is capable of operating. The situation was made worse recently by commit 22547c4c ("usb: hub: Wait for connection to be reestablished after port reset"), which increases the delay following a reset before a disconnect is recognized, thus giving the device more time to reconnect. This patch makes the check more robust. If the device was disconnected at any time during enumeration, we will now skip the full-speed handover. Signed-off-by:
Zdenek Kabelac <zkabelac@redhat.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Yoshihiro Shimoda authored
commit 2acecd58 upstream. The latest HW manual (Rev.0.55) shows us this UGCTRL2.VBUSSEL bit. If the bit sets to 1, the VBUS drive is controlled by phy related registers (called "UCOM Registers" on the manual). Since R-Car Gen3 environment will control VBUS by phy-rcar-gen3-usb2 driver, the UGCTRL2.VBUSSEL bit should be set to 1. So, this patch fixes the register's value. Otherwise, even if the ID pin indicates to peripheral, the R-Car will output USBn_PWEN to 1 when a host driver is running. Fixes: de18757e ("usb: renesas_usbhs: add R-Car Gen3 power control" Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
Yoshihiro Shimoda authored
commit aca5b9eb upstream. According to the gadget.h, a "complete" function will always be called with interrupts disabled. However, sometimes usb3_request_done() function is called with interrupts enabled. So, this function should be held by spin_lock_irqsave() to disable interruption. Also, this driver has to call spin_unlock() to avoid spinlock recursion by this driver before calling usb_gadget_giveback_request(). Reported-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Tested-by:
-
Bart Van Assche authored
commit d4acf365 upstream. The blk_mq_delay_kick_requeue_list() function is used by the device mapper and only by the device mapper to rerun the queue and requeue list after a delay. This function is called once per request that gets requeued. Modify this function such that the queue is run once per path change event instead of once per request that is requeued. Fixes: commit 2849450a ("blk-mq: introduce blk_mq_delay_kick_requeue_list()") Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
