- 17 Jun, 2021 5 commits
-
-
Takashi Iwai authored
The system port creation in ALSA OSS sequencer was wrongly checked against to the port number that can be never negative. The error code should be checked rather against the ioctl call. This patch corrects the error check. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210617134742.6321-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
My previous refactoring for ALSA firewire-motu driver brought regression to handle MOTU 8pre FireWire. The packet format is not operated correctly. Cc: <stable@vger.kernel.org> Fixes: dfbaa4dc ("ALSA: firewire-motu: add model-specific table of chunk count") Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210614083133.39753-1-o-takashi@sakamocchi.jpSigned-off-by:
-
Daehwan Jung authored
It mislabels its 96 kHz altsetting and that's why it causes some noise Signed-off-by:
Daehwan Jung <dh10.jung@samsung.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1623836097-61918-1-git-send-email-dh10.jung@samsung.comSigned-off-by:
-
Takashi Sakamoto authored
MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus) * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for the model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 bytes for control and status messages in the end of each data block. * The most of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b14). * It's selectable to use signal on optical interface, however the device has no register specific to it. The state has effect just to whether to exclude differed data chunks. * The internal multiplexer is not configured by software. Just after powering on, the device has a quirk to fail handling transaction. I recommend users to connect the device enough after powering on. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04102814 bus_info_length 4, crc_length 16, crc 10260 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003ab34 directory_length 3, crc 43828 42c 120001f2 specifier id 430 13000002 version 434 17102801 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002057d leaf_length 2, crc 1405 43c 0001f200 company_id 0001f2 | 440 0000d645 device_id 000000d645 | EUI-64 0001f2000000d645 Signed-off-by: -
Takashi Sakamoto authored
MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This model consists of three chips: * Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus) * Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and packet processing layer) * QuickLogic QuickRAM QL4016 (Data block processing layer and digital signal processing) This commit adds a support for this model, with its unique protocol as version 1. The features of this protocol are: * no MIDI support. * Rx packets have no data chunks for control and status messages. * Tx packets have 2 data chunks for control and status messages in the end of each data block. The chunks consist of data block counter (4 byte) and message (2 byte). * All of settings are represented in bit flag in one quadlet address (0x'ffff'f000'0b00). * When optical interface is configured as S/PDIF, signals of the interface is multiplexed for packets, instead of signals of coaxial interface. * The internal multiplexer is not configured by software. I note that the device has a quirk to mute output voluntarily during receiving batch of packets in the beginning of packet streaming. The operation to unmute should be done by software enough after the device shifts the state, however it's not deterministic. Furthermore, just after switching rate of sampling clock, the device keeps the state longer. This patch manages to sleep 100 msec before unmute operation, but it may fail to release the mute in the case that the rate is changed. As a workaround, users can restart packet streaming at the same rate, or write to specific register from userspace. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04105c54 bus_info_length 4, crc_length 16, crc 23636 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 00005015 device_id 0000005015 | EUI-64 0001f20000005015 root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035052 directory_length 3, crc 20562 42c 120001f2 specifier id 430 13000001 version 434 17101800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002eeb6 leaf_length 2, crc 61110 43c 0001f200 company_id 0001f2 | 440 00005015 device_id 0000005015 | EUI-64 0001f20000005015 Signed-off-by:
-
- 16 Jun, 2021 2 commits
-
-
Colin Ian King authored
The quirking bit-flags are currently set as contiguous integer enum values and so currently SND_BEBOB_QUIRK_INITIAL_DISCONTINUOUS_DBC is zero and so he quirking never getting set or tested correctly for this quirk. Fix this by setting the quirking constants as shifted bit values. Addresses-Coverity: ("Bitwise-and with zero") Fixes: 93cd12d6 ("ALSA: bebob: code refactoring for model-dependent quirks") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
-
Yang Yingliang authored
If snd_pmac_tumbler_init() or snd_pmac_tumbler_post_init() fails, snd_pmac_probe() need return error code. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210616021121.1991502-1-yangyingliang@huawei.comSigned-off-by:
-
- 14 Jun, 2021 2 commits
-
-
Jaroslav Kysela authored
The str variable should be always initialized before use even if the switch covers all cases. This is a minimalistic fix: Assign NULL, the sprintf() may print '(null)' if something is corrupted. Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20210614071710.1786866-1-perex@perex.czSigned-off-by:
-
Takashi Sakamoto authored
Nowadays a lot of devices are supported by ALSA dice driver. This commit fills Kconfig with entries for them. Signed-off-by:
-
- 12 Jun, 2021 11 commits
-
-
Takashi Sakamoto authored
Phonic shipped Helix board and FireFly series with IEEE 1394 functionality. Regarding to the parameters in unit directory, these series have two cases below: 1. the same parameters in unit directory * Firefly 202 * Firefly 302 * Firefly 808 Universal * HelixBoard 12 FireWire, 12 Universal * HelixBoard 18 FireWire, 18 Universal * HelixBoard 24 FireWire, 24 Universal 2. Unique parameters in unit directory * FireFly 808 * HelixBoard 12 FireWire MkII * HelixBoard 18 FireWire MkII * HelixBoard 24 FireWire MkII Signed-off-by:
-
Takashi Sakamoto authored
For M-Audio FireWire 410, the value of immediate entry for vendor in unit directory is the value for BridgeCo. AG OUI. It seems that M-Audio uses initial settings as is for its product. Signed-off-by:
-
Takashi Sakamoto authored
The value of vendor OUI is invalid. Furthermore it seems to be Terratec OEM. * http://subversion.ffado.org/wiki/AvcModels/AcousticRealityeARMasterOneSigned-off-by:
-
Takashi Sakamoto authored
For Mackie D.2 FireWire option card, 0x00000f is used for the value of immediate entry for vendor in unit directory. The value comes from report by FFADO user in below page: * http://subversion.ffado.org/wiki/AvcModels/MackieD.2. However, it seems to be wrong. There are two causes; vendor's mistake to decide value for GUID field in configuration ROM against standard, as Stefan Richter mentioned in below post: * https://lore.kernel.org/alsa-devel/1443917823-13516-1-git-send-email-o-takashi@sakamocchi.jp/#t Another is implementation of libffado. The library doesn't print out the value from immediate entry for vendor in unit directory. It just print out the first 6 bytes of GUID as vendor ID. This commit replaces with correct vendor OUI. Signed-off-by:
-
Takashi Sakamoto authored
All of devices with Echo Audio Fireworks board module has the same combination of specifier_id (0x00a02d) and version (0x010000) in unit directory. Signed-off-by:
-
Takashi Sakamoto authored
Although unit directory in root directory of configuration ROM has the same value (0x00a02d) for its specifier_id entry to express AV/C device, it has two cases for the value (0x010001/0x014001) to version entry. Signed-off-by:
-
Colin Ian King authored
The variable err is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Takashi Sakamoto authored
Tasklet is used to handle isochronous context of 1394 OHCI. The explicit usage of in_softirq() may be preferable than in_interrupt(). Signed-off-by:
-
Yang Yingliang authored
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by:
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
-
YueHaibing authored
sound/pci/trident/trident_memory.c: In function ‘set_tlb_bus’: sound/pci/trident/trident_memory.c:85:35: error: ‘pagetr’ undeclared (first use in this function); did you mean ‘page’? for (i = 0; i < UNIT_PAGES; i++, pagetr++) { ^~~~~~ page Fixes: 74fb9831 ("ALSA: trident: Drop shadow TLB pointer table") Signed-off-by:YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210612033458.42928-1-yuehaibing@huawei.comSigned-off-by:
-
- 11 Jun, 2021 3 commits
-
-
Takashi Sakamoto authored
This commit adds enumeration and structure member as code refactoring regarding to model-dependent quirks. Signed-off-by:
-
Takashi Sakamoto authored
In a commit c4d860a0 ("ALSA: bebob: loosen up severity of checking continuity for BeBoB v3 quirk"), a workaround was added for the quirk in BeBoB protocol version 3 against the discontinuity of data block counter. As long as seeing with sequence replay for media clock recovery, such quirk disappears. This commit deletes the workaround. Signed-off-by:
-
Takashi Sakamoto authored
In a commit d3eabe93 ("ALSA: bebob: expand sleep just after breaking connections for protocol version 1"), a workaround was added for a quirk of freeze in BeBoB protocol version 1. As long as seeing with sequence replay for media clock recovery, the quirk disappears. This commit removes the workaround. Signed-off-by:
-
- 10 Jun, 2021 12 commits
-
-
Takashi Iwai authored
The recent refactoring of memalloc stuff removed the inclusion of asm/page.h for simplicity, but it turned out this caused a compile error due the lack of PAGE_SIZE definition on some architectures. Do a partial revert for recovering from that. Fixes: 37af81c5 ("ALSA: core: Abstract memory alloc helpers") Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/202106101858.PfXMMuAa-lkp@intel.com Link: https://lore.kernel.org/r/20210610110935.10393-1-tiwai@suse.deSigned-off-by:
-
Damien Zammit authored
This provides support for Denon DN-X1600 hardware mixer. The device itself supports 44100, 48000 and 96000 (Hz) sample rates, but switching rates via software is currently not working. Therefore, this patch hardcodes the sample rate to 48000Hz which enables all 8 channels to function correctly when the correct sample rate is selected on the hardware itself. MIDI also tested and works. Signed-off-by:
Damien Zammit <damien@zamaudio.com> Tested-by: xalmoxis@gmail.com Link: https://lore.kernel.org/r/20210610083528.603942-2-damien@zamaudio.comSigned-off-by:
-
Takashi Iwai authored
The mmap of continuous pages and vmalloc'ed pages are relatively easily done in a shot with the existing helper functions. Implement the mmap ops for those types, so that the mmap works without relying on the page fault handling. Link: https://lore.kernel.org/r/20210609162551.7842-6-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
This patch moves the mmap handling code into the common memalloc handler. It allows us to reduce the memory-type specific code in PCM code gracefully. Link: https://lore.kernel.org/r/20210609162551.7842-5-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
This patch introduces the ops table to each memory allocation type (SNDRV_DMA_TYPE_XXX) and abstract the handling for the better code management. Then we get separate the page allocation, release and other tasks for each type, especially for the SG buffer. Each buffer type has now callbacks in the struct snd_malloc_ops, and the common helper functions call those ops accordingly. The former inline code that is specific to SG-buffer is moved into the local sgbuf.c, and we can simplify the PCM code without details of memory handling. Link: https://lore.kernel.org/r/20210609162551.7842-4-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
snd_sgbuf_get_ptr() and its sibling snd_pcm_sgbuf_get_ptr() are no longer used by any drivers. Let's drop them. Link: https://lore.kernel.org/r/20210609162551.7842-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The shadow TLB pointer table is allocated and set up, but never really used any longer by the driver. Let's drop it. Since this is the only user of snd_pcm_sgbuf_get_ptr(), we can clean up the API after this change. Link: https://lore.kernel.org/r/20210609162551.7842-2-tiwai@suse.deSigned-off-by:
-
huangjianghui authored
correct Reatek to Realtek Signed-off-by:
huangjianghui <huangjianghui@uniontech.com> Link: https://lore.kernel.org/r/20210610062036.30300-1-huangjianghui@uniontech.comSigned-off-by:
-
zuoqilin authored
There is no need to define the variable "ret" to receive. Signed-off-by:
zuoqilin <zuoqilin@yulong.com> Link: https://lore.kernel.org/r/20210610024053.1217-1-zuoqilin1@163.comSigned-off-by:
-
Takashi Sakamoto authored
The workqueue to notify PCM period elapse is not used anymore. Signed-off-by:
-
Takashi Sakamoto authored
All of drivers in ALSA firewire stack processes two chances to process isochronous packets in any isochronous context; in software IRQ context for 1394 OHCI, and in process context of ALSA PCM application. In the process context, callbacks of .pointer and .ack are utilized. The callbacks are done by ALSA PCM core under acquiring lock of PCM substream, In design of ALSA PCM core, call of snd_pcm_period_elapsed() is used for drivers to awaken user processes from waiting for available frames. The function voluntarily acquires lock of PCM substream, therefore it is not called in the process context since it causes dead lock. As a workaround to avoid the dead lock, all of drivers in ALSA firewire stack uses workqueue to delegate the call. A variant of snd_pcm_period_elapsed() without lock acquisition can obsolete the workqueue. An extra care is needed for the callback of .pointer since it's called from snd_pcm_period_elapsed(). The isochronous context in Linux FireWire subsystem is safe mostly for nested call except in software IRQ context. Signed-off-by:
-
Takashi Sakamoto authored
Current implementation of ALSA PCM core has a kernel API, snd_pcm_period_elapsed(), for drivers to queue event to awaken processes from waiting for available frames. The function voluntarily acquires lock of PCM substream, therefore it is not called in process context for any PCM operation since the lock is already acquired. It is convenient for packet-oriented driver, at least for drivers to audio and music unit in IEEE 1394 bus. The drivers are allowed by Linux FireWire subsystem to process isochronous packets queued till recent isochronous cycle in process context in any time. This commit adds snd_pcm_period_elapsed() variant, snd_pcm_period_elapsed_without_lock(), for drivers to queue the event in the process context. Signed-off-by:
-
- 09 Jun, 2021 5 commits
-
-
Takashi Iwai authored
PARISC harmony driver code contains an assignment in if condition, which is a bad coding style that may confuse readers and occasionally lead to bugs. This patch is merely for coding-style fixes, no functional changes. Link: https://lore.kernel.org/r/20210608140540.17885-67-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
ALSA I2C helper drivers contain a few assignments in if condition, which is a bad coding style that may confuse readers and occasionally lead to bugs. This patch is merely for coding-style fixes, no functional changes. Link: https://lore.kernel.org/r/20210608140540.17885-66-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
PPC powermac driver code contains a few assignments in if condition, which is a bad coding style that may confuse readers and occasionally lead to bugs. This patch is merely for coding-style fixes, no functional changes. Link: https://lore.kernel.org/r/20210608140540.17885-65-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
EMUx synth driver code contains lots of assignments in if condition, which is a bad coding style that may confuse readers and occasionally lead to bugs. This patch is merely for coding-style fixes, no functional changes. Link: https://lore.kernel.org/r/20210608140540.17885-64-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
A few ALSA serial drivers contain assignments in if condition, which is a bad coding style that may confuse readers and occasionally lead to bugs. This patch is merely for coding-style fixes, no functional changes. Link: https://lore.kernel.org/r/20210608140540.17885-63-tiwai@suse.deSigned-off-by:
-
