- 15 Mar, 2023 2 commits
-
-
Ruihai Zhou authored
The STARRY 2081101QFH032011-53G is a 10.1" WUXGA TFT LCD panel, which fits in nicely with the existing panel-boe-tv101wum-nl6 driver. Hence, we add a new compatible with panel specific config. Signed-off-by:
Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230314085034.6380-1-zhouruihai@huaqin.corp-partner.google.com
-
Liu Ying authored
Appropriate maintainers should be suggested for changes to the include/drm/drm_bridge.h header file, so add the header file to the 'DRM DRIVERS FOR BRIDGE CHIPS' section. Signed-off-by:
Liu Ying <victor.liu@nxp.com> Acked-by:
Robert Foss <robert.foss@linaro.org> Acked-by:
-
- 14 Mar, 2023 28 commits
-
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Reported-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/dri-devel/CACRpkdawSQsNqKJkSSoSw3HmMHyNXFUywxkdszpTC-a_uZA+tQ@mail.gmail.com/Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Reported-by:
-
Linus Walleij authored
This driver has no way to handle damage, the reason the drm_gem_fb_create_with_dirty() was used was because I had the ambition that the driver would only send out updates to DSI command displays whenever something changed, so as to minimize traffic. It turns out this ambition with command mode isn't working in practice because all the MCDE does is to create a continuous stream of DSI commands and while it is possible to send single frame updates with it, it's not been worthwhile. So we are just setting up continuous updates. Reported-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-23-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-12-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
Anitha Chrisanthus <anitha.chrisanthus@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-10-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-6-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Implement fbdev emulation that is optimized for drivers that use DMA helpers. The buffers may no tbe moveable, may not require damage handling and have to be located in system memory. This allows fbdev emulation to operate directly on the buffer and mmap it to userspace. Besides those constraints, the emulation works like in the generic code. As an internal DRM client provides, it receives hotplug, restore and unregister events. The DRM client is independent from the fbdev probing, which runs on the first successful hotplug event. The emulation is part of the DMA helper module and not build unless DMA helpers and fbdev emulation has been configured. Tested with vc4. Signed-off-by:
-
Uwe Kleine-König authored
Some of these dependencies used to be sensible when only a small part of the platforms supported by ARCH=arm could be compiled together in a single kernel image. Nowadays ARCH_MULTIPLATFORM is only used as a guard for kernel options incompatible with a multiplatform image. See commit 84fc8636 ("ARM: make ARCH_MULTIPLATFORM user-visible") for some more details. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Marian Cichy authored
Add support for the LCD Controller found on i.MX21 and i.MX25. It targets to be a drop in replacement for the imx-fb driver. [ukl: Rebase to a newer kernel version, various smaller fixes and improvements] Signed-off-by:
Marian Cichy <m.cichy@pengutronix.de> Reviewed-by:
-
Uwe Kleine-König authored
Modify the existing (fb-like) binding to support the drm-like binding in parallel. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 13 Mar, 2023 10 commits
-
-
Javier Martinez Canillas authored
Christian Hergert reports that the driver doesn't enable the property and that leads to always doing a full plane update, even when the driver does support damage clipping for the primary plane. Don't enable it for the cursor plane, because its .atomic_update callback doesn't handle damage clips. Reported-by:
Christian Hergert <chergert@redhat.com> Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230310125943.912514-1-javierm@redhat.com
-
Jianhua Lu authored
Add a driver for panels using the Novatek NT36523 display driver IC. Signed-off-by:
Jianhua Lu <lujianhua000@gmail.com> Reviewed-by:
-
Jianhua Lu authored
Novatek NT36523 is a display driver IC used to drive DSI panels. Signed-off-by:
-
Stanislaw Gruszka authored
When accel drivers are disabled do not process into sub-directories and create built-in archives: AR drivers/accel/habanalabs/built-in.a AR drivers/accel/ivpu/built-in.a Fixes: 35b13763 ("accel/ivpu: Introduce a new DRM driver for Intel VPU") Signed-off-by:
Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by:
Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230301162508.3963484-1-stanislaw.gruszka@linux.intel.com
-
Thomas Zimmermann authored
Set the VGA bit for unblanking with macro constants instead of magic values. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
The hardware settings for color format and pitch are state of the primary plane. Store the values in the primary plane's state structure struct cirrus_primary_plane_state. Adapt all callers. All fields in struct cirrus_device are now considered immutable after initialization. Plane updates consider the difference between the old and the new plane state before updating format or pitch. Signed-off-by:
-
Thomas Zimmermann authored
The cirrus driver maintains plane state, format and pitch, in it's device structure. Introduce a plane state for the primary plane to store the values. Signed-off-by:
-
Thomas Zimmermann authored
Inline the framebuffer size check into the primary plane's atomic_check cirrus_primary_plane_atomic_check(). No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Test a display mode against the available amount of video memory in struct drm_mode_config_funcs.mode_valid, which cirrus implements in cirrus_mode_config_mode_valid(). This helper tests display modes against device-wide limits. Remove the now-obsolete per-CRTC test. Signed-off-by:
-
Thomas Zimmermann authored
The DRM core implements a size check against the mode config's limits when creating a framebuffer. [1] Remove the unnecessary test from cirrus_fb_create() and remove the now-empty function. Create framebuffers with drm_gem_fb_create_with_dirty(). Signed-off-by:
-
