- 17 Apr, 2019 3 commits
-
-
Andy Lutomirski authored
[ Upstream commit 090edbe2 ] x86_64's saved_context nonsensically used separate idt_limit and idt_base fields and then cast &idt_limit to struct desc_ptr *. This was correct (with -fno-strict-aliasing), but it's confusing, served no purpose, and required #ifdeffery. Simplify this by using struct desc_ptr directly. No change in functionality. Tested-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Zhang Rui <rui.zhang@intel.com> Link: http://lkml.kernel.org/r/967909ce38d341b01d45eff53e278e2728a3a93a.1513286253.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Andy Lutomirski authored
[ Upstream commit 5b06bbcf ] __restore_processor_context() had a couple of ordering bugs. It restored GSBASE after calling load_gs_index(), and the latter can call into tracing code. It also tried to restore segment registers before restoring the LDT, which is straight-up wrong. Reorder the code so that we restore GSBASE, then the descriptor tables, then the segments. This fixes two bugs. First, it fixes a regression that broke resume under certain configurations due to irqflag tracing in native_load_gs_index(). Second, it fixes resume when the userspace process that initiated suspect had funny segments. The latter can be reproduced by compiling this: // SPDX-License-Identifier: GPL-2.0 /* * ldt_echo.c - Echo argv[1] while using an LDT segment */ int main(int argc, char **argv) { int ret; size_t len; char *buf; const struct user_desc desc = { .entry_number = 0, .base_addr = 0, .limit = 0xfffff, .seg_32bit = 1, .contents = 0, /* Data, grow-up */ .read_exec_only = 0, .limit_in_pages = 1, .seg_not_present = 0, .useable = 0 }; if (argc != 2) errx(1, "Usage: %s STRING", argv[0]); len = asprintf(&buf, "%s\n", argv[1]); if (len < 0) errx(1, "Out of memory"); ret = syscall(SYS_modify_ldt, 1, &desc, sizeof(desc)); if (ret < -1) errno = -ret; if (ret) err(1, "modify_ldt"); asm volatile ("movw %0, %%es" :: "rm" ((unsigned short)7)); write(1, buf, len); return 0; } and running ldt_echo >/sys/power/mem Without the fix, the latter causes a triple fault on resume. Fixes: ca37e57b ("x86/entry/64: Add missing irqflags tracing to native_load_gs_index()") Reported-by:
-
Marek Behún authored
Commit c4ba68b8 backported from upstream to 4.14 stable was probably applied wrongly, and instead of calling sfp_register_socket in sfp_probe, the socket registering code was put into sfp_remove. This is obviously wrong. The commit first appeared in 4.14.104. Fix it for the next 4.14 release. Fixes: c4ba68b8 ("net: sfp: do not probe SFP module before we're attached") Cc: stable <stable@vger.kernel.org> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by:
Marek Behún <marek.behun@nic.cz> Signed-off-by:
-
- 05 Apr, 2019 37 commits
-
-
Greg Kroah-Hartman authored
-
Hans de Goede authored
[ Upstream commit d693c008 ] Commit 53fa1f6e ("ACPI / video: Only default only_lcd to true on Win8-ready _desktops_") introduced chassis type detection, limiting the lcd_only check for the backlight to devices where the chassis-type indicates their is no builtin LCD panel. The purpose of the lcd_only check is to avoid advertising a backlight interface on desktops, since skylake and newer machines seem to always have a backlight interface even if there is no LCD panel. The limiting of this check to desktops only was done to avoid breaking backlight support on some laptops which do not have the lcd flag set. The Fujitsu ESPRIMO Q910 which is a compact (NUC like) desktop machine has a chassis type of 0x10 aka "Lunch Box". Without the lcd_only check we end up falsely advertising backlight/brightness control on this device. This commit extend the dmi_is_desktop check to return true for type 0x10 to fix this. Fixes: 53fa1f6e ("ACPI / video: Only default only_lcd to true ...") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Ville Syrjälä authored
[ Upstream commit c978ae9b ] We aren't supposed to force a stop+start between every i2c msg when performing multi message transfers. This should eg. cause the DDC segment address to be reset back to 0 between writing the segment address and reading the actual EDID extension block. To quote the E-DDC spec: "... this standard requires that the segment pointer be reset to 00h when a NO ACK or a STOP condition is received." Since we're going to touch this might as well consult the I2C_M_STOP flag to determine whether we want to force the stop or not. Cc: Brian Vincent <brainn@gmail.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=108081Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-1-ville.syrjala@linux.intel.comReviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Ben Dooks authored
[ Upstream commit e486df39 ] The dma_desc->bytes_transferred counter tracks the number of bytes moved by the DMA channel. This is then used to calculate the information passed back in the in the tegra_dma_tx_status callback, which is usually fine. When the DMA channel is configured as continous, then the bytes_transferred counter will increase over time and eventually overflow to become negative so the residue count will become invalid and the ALSA sound-dma code will report invalid hardware pointer values to the application. This results in some users becoming confused about the playout position and putting audio data in the wrong place. To fix this issue, always ensure the bytes_transferred field is modulo the size of the request. We only do this for the case of the cyclic transfer done ISR as anyone attempting to move 2GiB of DMA data in one transfer is unlikely. Note, we don't fix the issue that we should /never/ transfer a negative number of bytes so we could make those fields unsigned. Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Acked-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Katsuhiro Suzuki authored
[ Upstream commit a0e447b0 ] This patch fixes settings of GPLL frequency in fractional mode for rk3328. In this mode, FOUTVCO is calcurated by following formula: FOUTVCO = FREF * FBDIV / REFDIV + ((FREF * FRAC / REFDIV) >> 24) The problem is in FREF * FRAC >> 24 term. This result always lacks one from target value is specified by rate member. For example first itme of rk3328_pll_frac_rate originally has - rate : 1016064000 - refdiv: 3 - fbdiv : 127 - frac : 134217 - FREF * FBDIV / REFDIV = 1016000000 - (FREF * FRAC / REFDIV) >> 24 = 63999 Thus calculated rate is 1016063999. It seems wrong. If frac has 134218 (it is increased 1 from original value), second term is 64000. All other items have same situation. So this patch adds 1 to frac member in all items of rk3328_pll_frac_rate. Signed-off-by:
Katsuhiro Suzuki <katsuhiro@katsuster.net> Acked-by:
Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Rafael Ávila de Espíndola authored
[ Upstream commit d071ae09 ] Accessing per-CPU variables is done by finding the offset of the variable in the per-CPU block and adding it to the address of the respective CPU's block. Section 3.10.8 of ld.bfd's documentation states: For expressions involving numbers, relative addresses and absolute addresses, ld follows these rules to evaluate terms: Other binary operations, that is, between two relative addresses not in the same section, or between a relative address and an absolute address, first convert any non-absolute term to an absolute address before applying the operator." Note that LLVM's linker does not adhere to the GNU ld's implementation and as such requires implicitly-absolute terms to be explicitly marked as absolute in the linker script. If not, it fails currently with: ld.lld: error: ./arch/x86/kernel/vmlinux.lds:153: at least one side of the expression must be absolute ld.lld: error: ./arch/x86/kernel/vmlinux.lds:154: at least one side of the expression must be absolute Makefile:1040: recipe for target 'vmlinux' failed This is not a functional change for ld.bfd which converts the term to an absolute symbol anyways as specified above. Based on a previous submission by Tri Vo <trong@android.com>. Reported-by:
Dmitry Golovin <dima@golovin.in> Signed-off-by:
Rafael Ávila de Espíndola <rafael@espindo.la> [ Update commit message per Boris' and Michael's suggestions. ] Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> [ Massage commit message more, fix typos. ] Signed-off-by:
Borislav Petkov <bp@suse.de> Tested-by:
-
Zumeng Chen authored
[ Upstream commit ba2ffc96 ] Release fw_status, raw_fw_status, and tx_res_if when wl12xx_fetch_firmware failed instead of meaningless goto out to avoid the following memory leak reports(Only the last one listed): unreferenced object 0xc28a9a00 (size 512): comm "kworker/0:4", pid 31298, jiffies 2783204 (age 203.290s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<6624adab>] kmemleak_alloc+0x40/0x74 [<500ddb31>] kmem_cache_alloc_trace+0x1ac/0x270 [<db4d731d>] wl12xx_chip_wakeup+0xc4/0x1fc [wlcore] [<76c5db53>] wl1271_op_add_interface+0x4a4/0x8f4 [wlcore] [<cbf30777>] drv_add_interface+0xa4/0x1a0 [mac80211] [<65bac325>] ieee80211_reconfig+0x9c0/0x1644 [mac80211] [<2817c80e>] ieee80211_restart_work+0x90/0xc8 [mac80211] [<7e1d425a>] process_one_work+0x284/0x42c [<55f9432e>] worker_thread+0x2fc/0x48c [<abb582c6>] kthread+0x148/0x160 [<63144b13>] ret_from_fork+0x14/0x2c [< (null)>] (null) [<1f6e7715>] 0xffffffff Signed-off-by:
Zumeng Chen <zumeng.chen@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Ondrej Mosnacek authored
[ Upstream commit 53e0c2aa ] Ignore all selinux_inode_notifysecctx() calls on mounts with SBLABEL_MNT flag unset. This is achived by returning -EOPNOTSUPP for this case in selinux_inode_setsecurtity() (because that function should not be called in such case anyway) and translating this error to 0 in selinux_inode_notifysecctx(). This fixes behavior of kernfs-based filesystems when mounted with the 'context=' option. Before this patch, if a node's context had been explicitly set to a non-default value and later the filesystem has been remounted with the 'context=' option, then this node would show up as having the manually-set context and not the mount-specified one. Steps to reproduce: # mount -t cgroup2 cgroup2 /sys/fs/cgroup/unified # chcon unconfined_u:object_r:user_home_t:s0 /sys/fs/cgroup/unified/cgroup.stat # ls -lZ /sys/fs/cgroup/unified total 0 -r--r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.controllers -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.max.depth -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.max.descendants -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.procs -r--r--r--. 1 root root unconfined_u:object_r:user_home_t:s0 0 Dec 13 10:41 cgroup.stat -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.subtree_control -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.threads # umount /sys/fs/cgroup/unified # mount -o context=system_u:object_r:tmpfs_t:s0 -t cgroup2 cgroup2 /sys/fs/cgroup/unified Result before: # ls -lZ /sys/fs/cgroup/unified total 0 -r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.controllers -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.depth -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.descendants -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.procs -r--r--r--. 1 root root unconfined_u:object_r:user_home_t:s0 0 Dec 13 10:41 cgroup.stat -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.subtree_control -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.threads Result after: # ls -lZ /sys/fs/cgroup/unified total 0 -r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.controllers -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.depth -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.descendants -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.procs -r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.stat -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.subtree_control -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.threads Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
George Rimar authored
[ Upstream commit 927185c1 ] The kernel uses the OUTPUT_FORMAT linker script command in it's linker scripts. Most of the time, the -m option is passed to the linker with correct architecture, but sometimes (at least for x86_64) the -m option contradicts the OUTPUT_FORMAT directive. Specifically, arch/x86/boot and arch/x86/realmode/rm produce i386 object files, but are linked with the -m elf_x86_64 linker flag when building for x86_64. The GNU linker manpage doesn't explicitly state any tie-breakers between -m and OUTPUT_FORMAT. But with BFD and Gold linkers, OUTPUT_FORMAT overrides the emulation value specified with the -m option. LLVM lld has a different behavior, however. When supplied with contradicting -m and OUTPUT_FORMAT values it fails with the following error message: ld.lld: error: arch/x86/realmode/rm/header.o is incompatible with elf_x86_64 Therefore, just add the correct -m after the incorrect one (it overrides it), so the linker invocation looks like this: ld -m elf_x86_64 -z max-page-size=0x200000 -m elf_i386 --emit-relocs -T \ realmode.lds header.o trampoline_64.o stack.o reboot.o -o realmode.elf This is not a functional change for GNU ld, because (although not explicitly documented) OUTPUT_FORMAT overrides -m EMULATION. Tested by building x86_64 kernel with GNU gcc/ld toolchain and booting it in QEMU. [ bp: massage and clarify text. ] Suggested-by:
George Rimar <grimar@accesssoftek.com> Signed-off-by:
Tri Vo <trong@android.com> Signed-off-by:
-
Daniel Vetter authored
[ Upstream commit 934c5b32 ] The correct way for legacy drivers to update properties that need to do a full modeset, is to do a full modeset. Note that we don't need to call the drm_mode_config_internal helper because we're not changing any of the refcounted paramters. v2: Fixup error handling (Ville). Since the old code didn't bother I decided to just delete it instead of adding even more code for just error handling. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-2-daniel.vetter@ffwll.chSigned-off-by:
-
Paul Kocialkowski authored
[ Upstream commit 890880dd ] When drivers pass non-empty lists of modifiers for initializing their planes, we can infer that they allow framebuffer modifiers and set the driver's allow_fb_modifiers mode config element. In case the allow_fb_modifiers element was not set (some drivers tend to set them after registering planes), the modifiers will still be registered but won't be available to userspace unless the flag is set later. However in that case, the IN_FORMATS blob won't be created. In order to avoid this case and generally reduce the trouble associated with the flag, always set allow_fb_modifiers when a non-empty list of format modifiers is passed at plane init. Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190104085610.5829-1-paul.kocialkowski@bootlin.comSigned-off-by:
-
Axel Lin authored
[ Upstream commit f01a7beb ] The act8600_sudcdc_voltage_ranges setting does not match the datasheet. The problems in below entry: REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000), 1. The off-by-one min_sel causes wrong volatage calculation. The min_sel should be 192. 2. According to the datasheet[1] Table 7. (on page 43): The selector 248 (0b11111000) ~ 255 (0b11111111) are 41.400V. Also fix off-by-one for ACT8600_SUDCDC_VOLTAGE_NUM. [1] https://active-semi.com/wp-content/uploads/ACT8600_Datasheet.pdf Fixes: df3a950e ("regulator: act8865: Add act8600 support") Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Pawe? Chmiel authored
[ Upstream commit 49710c32 ] Previously when doing format enumeration, it was returning all formats supported by driver, even if they're not supported by hw. Add missing check for fmt_ver_flag, so it'll be fixed and only those supported by hw will be returned. Similar thing is already done in s5p_jpeg_find_format. It was found by using v4l2-compliance tool and checking result of VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS test and using v4l2-ctl to get list of all supported formats. Tested on s5pv210-galaxys (Samsung i9000 phone). Fixes: bb677f3a ("[media] Exynos4 JPEG codec v4l2 driver") Signed-off-by:
Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com> Reviewed-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> [hverkuil-cisco@xs4all.nl: fix a few alignment issues] Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 8e2f311a ] Following command: iptables -D FORWARD -m physdev ... causes connectivity loss in some setups. Reason is that iptables userspace will probe kernel for the module revision of the physdev patch, and physdev has an artificial dependency on br_netfilter (xt_physdev use makes no sense unless a br_netfilter module is loaded). This causes the "phydev" module to be loaded, which in turn enables the "call-iptables" infrastructure. bridged packets might then get dropped by the iptables ruleset. The better fix would be to change the "call-iptables" defaults to 0 and enforce explicit setting to 1, but that breaks backwards compatibility. This does the next best thing: add a request_module call to checkentry. This was a stray '-D ... -m physdev' won't activate br_netfilter anymore. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Shunyong Yang authored
[ Upstream commit 875aac8a ] In async_tx_test_ack(), it uses flags in struct dma_async_tx_descriptor to check the ACK status. As hidma reuses the descriptor in a free list when hidma_prep_dma_*(memcpy/memset) is called, the flag will keep ACKed if the descriptor has been used before. This will cause a BUG_ON in async_tx_quiesce(). kernel BUG at crypto/async_tx/async_tx.c:282! Internal error: Oops - BUG: 0 1 SMP ... task: ffff8017dd3ec000 task.stack: ffff8017dd3e8000 PC is at async_tx_quiesce+0x54/0x78 [async_tx] LR is at async_trigger_callback+0x98/0x110 [async_tx] This patch initializes flags in dma_async_tx_descriptor by the flags passed from the caller when hidma_prep_dma_*(memcpy/memset) is called. Cc: Joey Zheng <yu.zheng@hxt-semitech.com> Reviewed-by:
Sinan Kaya <okaya@kernel.org> Signed-off-by:
Shunyong Yang <shunyong.yang@hxt-semitech.com> Signed-off-by:
-
Shunyong Yang authored
[ Upstream commit 546c0547 ] When dma_cookie_complete() is called in hidma_process_completed(), dma_cookie_status() will return DMA_COMPLETE in hidma_tx_status(). Then, hidma_txn_is_success() will be called to use channel cookie mchan->last_success to do additional DMA status check. Current code assigns mchan->last_success after dma_cookie_complete(). This causes a race condition of dma_cookie_status() returns DMA_COMPLETE before mchan->last_success is assigned correctly. The race will cause hidma_tx_status() return DMA_ERROR but the transaction is actually a success. Moreover, in async_tx case, it will cause a timeout panic in async_tx_quiesce(). Kernel panic - not syncing: async_tx_quiesce: DMA error waiting for transaction ... Call trace: [<ffff000008089994>] dump_backtrace+0x0/0x1f4 [<ffff000008089bac>] show_stack+0x24/0x2c [<ffff00000891e198>] dump_stack+0x84/0xa8 [<ffff0000080da544>] panic+0x12c/0x29c [<ffff0000045d0334>] async_tx_quiesce+0xa4/0xc8 [async_tx] [<ffff0000045d03c8>] async_trigger_callback+0x70/0x1c0 [async_tx] [<ffff0000048b7d74>] raid_run_ops+0x86c/0x1540 [raid456] [<ffff0000048bd084>] handle_stripe+0x5e8/0x1c7c [raid456] [<ffff0000048be9ec>] handle_active_stripes.isra.45+0x2d4/0x550 [raid456] [<ffff0000048beff4>] raid5d+0x38c/0x5d0 [raid456] [<ffff000008736538>] md_thread+0x108/0x168 [<ffff0000080fb1cc>] kthread+0x10c/0x138 [<ffff000008084d34>] ret_from_fork+0x10/0x18 Cc: Joey Zheng <yu.zheng@hxt-semitech.com> Reviewed-by:
-
Anders Roxell authored
[ Upstream commit 9227ab56 ] The warning got introduced by commit 930507c1 ("arm64: add basic Kconfig symbols for i.MX8"). Since it got enabled for arm64. The warning haven't been seen before since size_t was 'unsigned int' when built on arm32. ../drivers/dma/imx-dma.c: In function ‘imxdma_sg_next’: ../include/linux/kernel.h:846:29: warning: comparison of distinct pointer types lacks a cast (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1))) ^~ ../include/linux/kernel.h:860:4: note: in expansion of macro ‘__typecheck’ (__typecheck(x, y) && __no_side_effects(x, y)) ^~~~~~~~~~~ ../include/linux/kernel.h:870:24: note: in expansion of macro ‘__safe_cmp’ __builtin_choose_expr(__safe_cmp(x, y), \ ^~~~~~~~~~ ../include/linux/kernel.h:879:19: note: in expansion of macro ‘__careful_cmp’ #define min(x, y) __careful_cmp(x, y, <) ^~~~~~~~~~~~~ ../drivers/dma/imx-dma.c:288:8: note: in expansion of macro ‘min’ now = min(d->len, sg_dma_len(sg)); ^~~ Rework so that we use min_t and pass in the size_t that returns the minimum of two values, using the specified type. Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Acked-by:
Olof Johansson <olof@lixom.net> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Valentin Schneider authored
[ Upstream commit ce48c457 ] Since we've had: commit cb538267 ("jump_label/lockdep: Assert we hold the hotplug lock for _cpuslocked() operations") we've been getting some lockdep warnings during init, such as on HiKey960: [ 0.820495] WARNING: CPU: 4 PID: 0 at kernel/cpu.c:316 lockdep_assert_cpus_held+0x3c/0x48 [ 0.820498] Modules linked in: [ 0.820509] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G S 4.20.0-rc5-00051-g4cae42a #34 [ 0.820511] Hardware name: HiKey960 (DT) [ 0.820516] pstate: 600001c5 (nZCv dAIF -PAN -UAO) [ 0.820520] pc : lockdep_assert_cpus_held+0x3c/0x48 [ 0.820523] lr : lockdep_assert_cpus_held+0x38/0x48 [ 0.820526] sp : ffff00000a9cbe50 [ 0.820528] x29: ffff00000a9cbe50 x28: 0000000000000000 [ 0.820533] x27: 00008000b69e5000 x26: ffff8000bff4cfe0 [ 0.820537] x25: ffff000008ba69e0 x24: 0000000000000001 [ 0.820541] x23: ffff000008fce000 x22: ffff000008ba70c8 [ 0.820545] x21: 0000000000000001 x20: 0000000000000003 [ 0.820548] x19: ffff00000a35d628 x18: ffffffffffffffff [ 0.820552] x17: 0000000000000000 x16: 0000000000000000 [ 0.820556] x15: ffff00000958f848 x14: 455f3052464d4d34 [ 0.820559] x13: 00000000769dde98 x12: ffff8000bf3f65a8 [ 0.820564] x11: 0000000000000000 x10: ffff00000958f848 [ 0.820567] x9 : ffff000009592000 x8 : ffff00000958f848 [ 0.820571] x7 : ffff00000818ffa0 x6 : 0000000000000000 [ 0.820574] x5 : 0000000000000000 x4 : 0000000000000001 [ 0.820578] x3 : 0000000000000000 x2 : 0000000000000001 [ 0.820582] x1 : 00000000ffffffff x0 : 0000000000000000 [ 0.820587] Call trace: [ 0.820591] lockdep_assert_cpus_held+0x3c/0x48 [ 0.820598] static_key_enable_cpuslocked+0x28/0xd0 [ 0.820606] arch_timer_check_ool_workaround+0xe8/0x228 [ 0.820610] arch_timer_starting_cpu+0xe4/0x2d8 [ 0.820615] cpuhp_invoke_callback+0xe8/0xd08 [ 0.820619] notify_cpu_starting+0x80/0xb8 [ 0.820625] secondary_start_kernel+0x118/0x1d0 We've also had a similar warning in sched_init_smp() for every asymmetric system that would enable the sched_asym_cpucapacity static key, although that was singled out in: commit 40fa3780 ("sched/core: Take the hotplug lock in sched_init_smp()") Those warnings are actually harmless, since we cannot have hotplug operations at the time they appear. Instead of starting to sprinkle useless hotplug lock operations in the init codepaths, mute the warnings until they start warning about real problems. Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Valentin Schneider <valentin.schneider@arm.com> Signed-off-by:
-
Buland Singh authored
[ Upstream commit 24d48a61 ] Commit '3d035f58 ("drivers/char/hpet.c: allow user controlled mmap for user processes")' introduced a new kernel command line parameter hpet_mmap, that is required to expose the memory map of the HPET registers to user-space. Unfortunately the kernel command line parameter 'hpet_mmap' is broken and never takes effect due to missing '=' character in the __setup() code of hpet_mmap_enable. Before this patch: dmesg output with the kernel command line parameter hpet_mmap=1 [ 0.204152] HPET mmap disabled dmesg output with the kernel command line parameter hpet_mmap=0 [ 0.204192] HPET mmap disabled After this patch: dmesg output with the kernel command line parameter hpet_mmap=1 [ 0.203945] HPET mmap enabled dmesg output with the kernel command line parameter hpet_mmap=0 [ 0.204652] HPET mmap disabled Fixes: 3d035f58 ("drivers/char/hpet.c: allow user controlled mmap for user processes") Signed-off-by:
Buland Singh <bsingh@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Song Hongyan authored
[ Upstream commit 2edefc05 ] Host driver should handle interrupt mask register earlier than wake up ish FW else there will be conditions when FW interrupt comes, host PIMR register still not set ready, so move the interrupt mask setting before ish_wakeup. Clear PISR busy_clear bit in ish_irq_handler. If not clear, there will be conditions host driver received a busy_clear interrupt (before the busy_clear mask bit is ready), it will return IRQ_NONE after check_generated_interrupt, the interrupt will never be cleared, causing the DEVICE not sending following IRQ. Since PISR clear should not be called for the CHV device we do this change. After the change, both ISH2HOST interrupt and busy_clear interrupt will be considered as interrupt from ISH, busy_clear interrupt will return IRQ_HANDLED from IPC_IS_BUSY check. Signed-off-by:
Song Hongyan <hongyan.song@intel.com> Acked-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Timo Alho authored
[ Upstream commit 51294bf6 ] On cases where device tree entries for fuse and clock provider are in different order, fuse driver needs to defer probing. This leads to freeing incorrect IO base address as the fuse->base variable gets overwritten once during first probe invocation. This leads to the following spew during boot: [ 3.082285] Trying to vfree() nonexistent vm area (00000000cfe8fd94) [ 3.082308] WARNING: CPU: 5 PID: 126 at /hdd/l4t/kernel/stable/mm/vmalloc.c:1511 __vunmap+0xcc/0xd8 [ 3.082318] Modules linked in: [ 3.082330] CPU: 5 PID: 126 Comm: kworker/5:1 Tainted: G S 4.19.7-tegra-gce119d3 #1 [ 3.082340] Hardware name: quill (DT) [ 3.082353] Workqueue: events deferred_probe_work_func [ 3.082364] pstate: 40000005 (nZcv daif -PAN -UAO) [ 3.082372] pc : __vunmap+0xcc/0xd8 [ 3.082379] lr : __vunmap+0xcc/0xd8 [ 3.082385] sp : ffff00000a1d3b60 [ 3.082391] x29: ffff00000a1d3b60 x28: 0000000000000000 [ 3.082402] x27: 0000000000000000 x26: ffff000008e8b610 [ 3.082413] x25: 0000000000000000 x24: 0000000000000009 [ 3.082423] x23: ffff000009221a90 x22: ffff000009f6d000 [ 3.082432] x21: 0000000000000000 x20: 0000000000000000 [ 3.082442] x19: ffff000009f6d000 x18: ffffffffffffffff [ 3.082452] x17: 0000000000000000 x16: 0000000000000000 [ 3.082462] x15: ffff0000091396c8 x14: 0720072007200720 [ 3.082471] x13: 0720072007200720 x12: 0720072907340739 [ 3.082481] x11: 0764076607380765 x10: 0766076307300730 [ 3.082491] x9 : 0730073007300730 x8 : 0730073007280720 [ 3.082501] x7 : 0761076507720761 x6 : 0000000000000102 [ 3.082510] x5 : 0000000000000000 x4 : 0000000000000000 [ 3.082519] x3 : ffffffffffffffff x2 : ffff000009150ff8 [ 3.082528] x1 : 3d95b1429fff5200 x0 : 0000000000000000 [ 3.082538] Call trace: [ 3.082545] __vunmap+0xcc/0xd8 [ 3.082552] vunmap+0x24/0x30 [ 3.082561] __iounmap+0x2c/0x38 [ 3.082569] tegra_fuse_probe+0xc8/0x118 [ 3.082577] platform_drv_probe+0x50/0xa0 [ 3.082585] really_probe+0x1b0/0x288 [ 3.082593] driver_probe_device+0x58/0x100 [ 3.082601] __device_attach_driver+0x98/0xf0 [ 3.082609] bus_for_each_drv+0x64/0xc8 [ 3.082616] __device_attach+0xd8/0x130 [ 3.082624] device_initial_probe+0x10/0x18 [ 3.082631] bus_probe_device+0x90/0x98 [ 3.082638] deferred_probe_work_func+0x74/0xb0 [ 3.082649] process_one_work+0x1e0/0x318 [ 3.082656] worker_thread+0x228/0x450 [ 3.082664] kthread+0x128/0x130 [ 3.082672] ret_from_fork+0x10/0x18 [ 3.082678] ---[ end trace 0810fe6ba772c1c7 ]--- Fix this by retaining the value of fuse->base until driver has successfully probed. Signed-off-by:
Timo Alho <talho@nvidia.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
David Tolnay authored
[ Upstream commit aef027db ] The virtio-rng driver uses a completion called have_data to wait for a virtio read to be fulfilled by the hypervisor. The completion is reset before placing a buffer on the virtio queue and completed by the virtio callback once data has been written into the buffer. Prior to this commit, the driver called init_completion on this completion both during probe as well as when registering virtio buffers as part of a hwrng read operation. The second of these init_completion calls should instead be reinit_completion because the have_data completion has already been inited by probe. As described in Documentation/scheduler/completion.txt, "Calling init_completion() twice on the same completion object is most likely a bug". This bug was present in the initial implementation of virtio-rng in f7f510ec ("virtio: An entropy device, as suggested by hpa"). Back then the have_data completion was a single static completion rather than a member of one of potentially multiple virtrng_info structs as implemented later by 08e53fbd ("virtio-rng: support multiple virtio-rng devices"). The original driver incorrectly used init_completion rather than INIT_COMPLETION to reset have_data during read. Tested by running `head -c48 /dev/random | hexdump` within crosvm, the Chrome OS virtual machine monitor, and confirming that the virtio-rng driver successfully produces random bytes from the host. Signed-off-by:
David Tolnay <dtolnay@gmail.com> Tested-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Akinobu Mita authored
[ Upstream commit 29856308 ] This driver sets initial frame width and height to 0x0, which is invalid. So set it to selection rectangle bounds instead. This is detected by v4l2-compliance detected. Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Roger Quadros authored
[ Upstream commit 169e3b68 ] On v3.10a in dual-role mode, if port is in device mode and gadget driver isn't loaded, the OTG event interrupts don't come through. It seems that if the core is configured to be OTG2.0 only, then we can't leave the DCFG.DEVSPD at Super-speed (default) if we expect OTG to work properly. It must be set to High-speed. Fix this issue by configuring DCFG.DEVSPD to the supported maximum speed at gadget init. Device tree still needs to provide correct supported maximum speed for this to work. This issue wasn't present on v2.40a but is seen on v3.10a. It doesn't cause any side effects on v2.40a. Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Nathan Fontenot authored
[ Upstream commit 81b61324 ] On pseries systems, performing a partition migration can result in altering the nodes a CPU is assigned to on the destination system. For exampl, pre-migration on the source system CPUs are in node 1 and 3, post-migration on the destination system CPUs are in nodes 2 and 3. Handling the node change for a CPU can cause corruption in the slab cache if we hit a timing where a CPUs node is changed while cache_reap() is invoked. The corruption occurs because the slab cache code appears to rely on the CPU and slab cache pages being on the same node. The current dynamic updating of a CPUs node done in arch/powerpc/mm/numa.c does not prevent us from hitting this scenario. Changing the device tree property update notification handler that recognizes an affinity change for a CPU to do a full DLPAR remove and add of the CPU instead of dynamically changing its node resolves this issue. Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
Michael W. Bringmann <mwb@linux.vnet.ibm.com> Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Manfred Schlaegl authored
[ Upstream commit 7ab57b76 ] We increase the default limit for buffer memory allocation by a factor of 10 to 640K to prevent data loss when using fast serial interfaces. For example when using RS485 without flow-control at speeds of 1Mbit/s an upwards we've run into problems such as applications being too slow to read out this buffer (on embedded devices based on imx53 or imx6). If you want to write transmitted data to a slow SD card and thus have realtime requirements, this limit can become a problem. That shouldn't be the case and 640K buffers fix such problems for us. This value is a maximum limit for allocation only. It has no effect on systems that currently run fine. When transmission is slow enough applications and hardware can keep up and increasing this limit doesn't change anything. It only _allows_ to allocate more than 2*64K in cases we currently fail to allocate memory despite having some. Signed-off-by:
Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Signed-off-by:
Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by:
-
Chen-Yu Tsai authored
[ Upstream commit cec2b188 ] gpiod_get_value() gives out a warning if access to the underlying gpiochip requires sleeping, which is common for I2C based chips: WARNING: CPU: 0 PID: 77 at drivers/gpio/gpiolib.c:2500 gpiod_get_value+0xd0/0x100 Modules linked in: CPU: 0 PID: 77 Comm: kworker/0:2 Not tainted 4.14.0-rc3-00589-gf32897915d48-dirty #90 Hardware name: Allwinner sun4i/sun5i Families Workqueue: events deferred_probe_work_func [<c010ec50>] (unwind_backtrace) from [<c010b784>] (show_stack+0x10/0x14) [<c010b784>] (show_stack) from [<c0797224>] (dump_stack+0x88/0x9c) [<c0797224>] (dump_stack) from [<c0125b08>] (__warn+0xe8/0x100) [<c0125b08>] (__warn) from [<c0125bd0>] (warn_slowpath_null+0x20/0x28) [<c0125bd0>] (warn_slowpath_null) from [<c037069c>] (gpiod_get_value+0xd0/0x100) [<c037069c>] (gpiod_get_value) from [<c03778d0>] (pwm_backlight_probe+0x238/0x508) [<c03778d0>] (pwm_backlight_probe) from [<c0411a2c>] (platform_drv_probe+0x50/0xac) [<c0411a2c>] (platform_drv_probe) from [<c0410224>] (driver_probe_device+0x238/0x2e8) [<c0410224>] (driver_probe_device) from [<c040e820>] (bus_for_each_drv+0x44/0x94) [<c040e820>] (bus_for_each_drv) from [<c040ff0c>] (__device_attach+0xb0/0x114) [<c040ff0c>] (__device_attach) from [<c040f4f8>] (bus_probe_device+0x84/0x8c) [<c040f4f8>] (bus_probe_device) from [<c040f944>] (deferred_probe_work_func+0x50/0x14c) [<c040f944>] (deferred_probe_work_func) from [<c013be84>] (process_one_work+0x1ec/0x414) [<c013be84>] (process_one_work) from [<c013ce5c>] (worker_thread+0x2b0/0x5a0) [<c013ce5c>] (worker_thread) from [<c0141908>] (kthread+0x14c/0x154) [<c0141908>] (kthread) from [<c0107ab0>] (ret_from_fork+0x14/0x24) This was missed in commit 0c9501f8 ("backlight: pwm_bl: Handle gpio that can sleep"). The code was then moved to a separate function in commit 7613c922 ("backlight: pwm_bl: Move the checks for initial power state to a separate function"). The only usage of gpiod_get_value() is during the probe stage, which is safe to sleep in. Switch to gpiod_get_value_cansleep(). Fixes: 0c9501f8 ("backlight: pwm_bl: Handle gpio that can sleep") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Oleg Nesterov authored
[ Upstream commit 51bee5ab ] The only user of cgroup_subsys->free() callback is pids_cgrp_subsys which needs pids_free() to uncharge the pid. However, ->free() is called from __put_task_struct()->cgroup_free() and this is too late. Even the trivial program which does for (;;) { int pid = fork(); assert(pid >= 0); if (pid) wait(NULL); else exit(0); } can run out of limits because release_task()->call_rcu(delayed_put_task_struct) implies an RCU gp after the task/pid goes away and before the final put(). Test-case: mkdir -p /tmp/CG mount -t cgroup2 none /tmp/CG echo '+pids' > /tmp/CG/cgroup.subtree_control mkdir /tmp/CG/PID echo 2 > /tmp/CG/PID/pids.max perl -e 'while ($p = fork) { wait; } $p // die "fork failed: $!\n"' & echo $! > /tmp/CG/PID/cgroup.procs Without this patch the forking process fails soon after migration. Rename cgroup_subsys->free() to cgroup_subsys->release() and move the callsite into the new helper, cgroup_release(), called by release_task() which actually frees the pid(s). Reported-by:
Herton R. Krzesinski <hkrzesin@redhat.com> Reported-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Valdis Kletnieks authored
[ Upstream commit 116bfa96 ] Compiling with W=1 generates warnings: CC kernel/bpf/core.o kernel/bpf/core.c:721:12: warning: no previous prototype for ?bpf_jit_alloc_exec_limit? [-Wmissing-prototypes] 721 | u64 __weak bpf_jit_alloc_exec_limit(void) | ^~~~~~~~~~~~~~~~~~~~~~~~ kernel/bpf/core.c:757:14: warning: no previous prototype for ?bpf_jit_alloc_exec? [-Wmissing-prototypes] 757 | void *__weak bpf_jit_alloc_exec(unsigned long size) | ^~~~~~~~~~~~~~~~~~ kernel/bpf/core.c:762:13: warning: no previous prototype for ?bpf_jit_free_exec? [-Wmissing-prototypes] 762 | void __weak bpf_jit_free_exec(void *addr) | ^~~~~~~~~~~~~~~~~ All three are weak functions that archs can override, provide proper prototypes for when a new arch provides their own. Signed-off-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Acked-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Russell King authored
[ Upstream commit 5388a5b8 ] machine_crash_nonpanic_core() does this: while (1) cpu_relax(); because the kernel has crashed, and we have no known safe way to deal with the CPU. So, we place the CPU into an infinite loop which we expect it to never exit - at least not until the system as a whole is reset by some method. In the absence of erratum 754327, this code assembles to: b . In other words, an infinite loop. When erratum 754327 is enabled, this becomes: 1: dmb b 1b It has been observed that on some systems (eg, OMAP4) where, if a crash is triggered, the system tries to kexec into the panic kernel, but fails after taking the secondary CPU down - placing it into one of these loops. This causes the system to livelock, and the most noticable effect is the system stops after issuing: Loading crashdump kernel... to the system console. The tested as working solution I came up with was to add wfe() to these infinite loops thusly: while (1) { cpu_relax(); wfe(); } which, without 754327 builds to: 1: wfe b 1b or with 754327 is enabled: 1: dmb wfe b 1b Adding "wfe" does two things depending on the environment we're running under: - where we're running on bare metal, and the processor implements "wfe", it stops us spinning endlessly in a loop where we're never going to do any useful work. - if we're running in a VM, it allows the CPU to be given back to the hypervisor and rescheduled for other purposes (maybe a different VM) rather than wasting CPU cycles inside a crashed VM. However, in light of erratum 794072, Will Deacon wanted to see 10 nops as well - which is reasonable to cover the case where we have erratum 754327 enabled _and_ we have a processor that doesn't implement the wfe hint. So, we now end up with: 1: wfe b 1b when erratum 754327 is disabled, or: 1: dmb nop nop nop nop nop nop nop nop nop nop wfe b 1b when erratum 754327 is enabled. We also get the dmb + 10 nop sequence elsewhere in the kernel, in terminating loops. This is reasonable - it means we get the workaround for erratum 794072 when erratum 754327 is enabled, but still relinquish the dead processor - either by placing it in a lower power mode when wfe is implemented as such or by returning it to the hypervisior, or in the case where wfe is a no-op, we use the workaround specified in erratum 794072 to avoid the problem. These as two entirely orthogonal problems - the 10 nops addresses erratum 794072, and the wfe is an optimisation that makes the system more efficient when crashed either in terms of power consumption or by allowing the host/other VMs to make use of the CPU. I don't see any reason not to use kexec() inside a VM - it has the potential to provide automated recovery from a failure of the VMs kernel with the opportunity for saving a crashdump of the failure. A panic() with a reboot timeout won't do that, and reading the libvirt documentation, setting on_reboot to "preserve" won't either (the documentation states "The preserve action for an on_reboot event is treated as a destroy".) Surely it has to be a good thing to avoiding having CPUs spinning inside a VM that is doing no useful work. Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Vladimir Murzin authored
[ Upstream commit 72cd4064 ] ARMv8M introduces support for Security extension to M class, among other things it affects exception handling, especially, encoding of EXC_RETURN. The new bits have been added: Bit [6] Secure or Non-secure stack Bit [5] Default callee register stacking Bit [0] Exception Secure which conflicts with hard-coded value of EXC_RETURN: In fact, we only care of few bits: Bit [3] Mode (0 - Handler, 1 - Thread) Bit [2] Stack pointer selection (0 - Main, 1 - Process) We can toggle only those bits and left other bits as they were on exception entry. It is basically, what patch does - saves EXC_RETURN when we do transition form Thread to Handler mode (it is first svc), so later saved value is used instead of EXC_RET_THREADMODE_PROCESSSTACK. Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
-
Stanislaw Gruszka authored
[ Upstream commit 3bd1505f ] As reported by Michael eeprom 0d is supported and work with the driver. Dump of /sys/kernel/debug/ieee80211/phy1/mt7601u/eeprom_param with 0d EEPORM looks like this: RSSI offset: 0 0 Reference temp: f9 LNA gain: 8 Reg channels: 1-14 Per rate power: raw:05 bw20:05 bw40:05 raw:05 bw20:05 bw40:05 raw:03 bw20:03 bw40:03 raw:03 bw20:03 bw40:03 raw:04 bw20:04 bw40:04 raw:00 bw20:00 bw40:00 raw:00 bw20:00 bw40:00 raw:00 bw20:00 bw40:00 raw:02 bw20:02 bw40:02 raw:00 bw20:00 bw40:00 Per channel power: tx_power ch1:09 ch2:09 tx_power ch3:0a ch4:0a tx_power ch5:0a ch6:0a tx_power ch7:0b ch8:0b tx_power ch9:0b ch10:0b tx_power ch11:0b ch12:0b tx_power ch13:0b ch14:0b Reported-and-tested-by:
Michael <ZeroBeat@gmx.de> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Jakub Kicinski <kubakici@wp.pl> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit 8cd09a3d ] If of_platform_populate() fails in gsbi_probe(), gsbi->hclk is left undisabled. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 4e46c2a9 ] The UEFI spec revision 2.7 errata A section 8.4 has the following to say about the virtual memory runtime services: "This section contains function definitions for the virtual memory support that may be optionally used by an operating system at runtime. If an operating system chooses to make EFI runtime service calls in a virtual addressing mode instead of the flat physical mode, then the operating system must use the services in this section to switch the EFI runtime services from flat physical addressing to virtual addressing." So it is pretty clear that calling SetVirtualAddressMap() is entirely optional, and so there is no point in doing so unless it achieves anything useful for us. This is not the case for 64-bit ARM. The identity mapping used by the firmware is arbitrarily converted into another permutation of userland addresses (i.e., bits [63:48] cleared), and the runtime code could easily deal with the original layout in exactly the same way as it deals with the converted layout. However, due to constraints related to page size differences if the OS is not running with 4k pages, and related to systems that may expose the individual sections of PE/COFF runtime modules as different memory regions, creating the virtual layout is a bit fiddly, and requires us to sort the memory map and reason about adjacent regions with identical memory types etc etc. So the obvious fix is to stop calling SetVirtualAddressMap() altogether on arm64 systems. However, to avoid surprises, which are notoriously hard to diagnose when it comes to OS<->firmware interactions, let's start by making it an opt-out feature, and implement support for the 'efi=novamap' kernel command line parameter on ARM and arm64 systems. ( Note that 32-bit ARM generally does require SetVirtualAddressMap() to be used, given that the physical memory map and the kernel virtual address map are not guaranteed to be non-overlapping like on arm64. However, having support for efi=novamap,noruntime on 32-bit ARM, combined with the recently proposed support for earlycon=efifb, is likely to be useful to diagnose boot issues on such systems if they have no accessible serial port. ) Tested-by:
Jeffrey Hugo <jhugo@codeaurora.org> Tested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Alexander Graf <agraf@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190202094119.13230-8-ard.biesheuvel@linaro.orgSigned-off-by:
-
Mathieu Malaterre authored
[ Upstream commit 3e3380d0 ] Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This will solve as a side effect warning: Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>" This is a follow up to commit 4c9847b7 ("dt-bindings: Remove leading 0x from bindings notation") Reported-by:
David Daney <ddaney@caviumnetworks.com> Suggested-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Mathieu Malaterre <malat@debian.org> [vzapolskiy: fixed commit message to pass checkpatch.pl test] Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 5de0fef0 ] The EFI memory attributes code cross-references the EFI memory map with the more granular EFI memory attributes table to ensure that they are in sync before applying the strict permissions to the regions it describes. Since we always install virtual mappings for the EFI runtime regions to which these strict permissions apply, we currently perform a sanity check on the EFI memory descriptor, and ensure that the EFI_MEMORY_RUNTIME bit is set, and that the virtual address has been assigned. However, in cases where a runtime region exists at physical address 0x0, and the virtual mapping equals the physical mapping, e.g., when running in mixed mode on x86, we encounter a memory descriptor with the runtime attribute and virtual address 0x0, and incorrectly draw the conclusion that a runtime region exists for which no virtual mapping was installed, and give up altogether. The consequence of this is that firmware mappings retain their read-write-execute permissions, making the system more vulnerable to attacks. So let's only bail if the virtual address of 0x0 has been assigned to a physical region that does not reside at address 0x0. Signed-off-by:
Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Alexander Graf <agraf@suse.de> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 10f0d2f5 ("efi: Implement generic support for the Memory ...") Link: http://lkml.kernel.org/r/20190202094119.13230-4-ard.biesheuvel@linaro.orgSigned-off-by:
-
Hidetoshi Seto authored
[ Upstream commit 1ca4fa3a ] register_sched_domain_sysctl() copies the cpu_possible_mask into sd_sysctl_cpus, but only if sd_sysctl_cpus hasn't already been allocated (ie, CONFIG_CPUMASK_OFFSTACK is set). However, when CONFIG_CPUMASK_OFFSTACK is not set, sd_sysctl_cpus is left uninitialized (all zeroes) and the kernel may fail to initialize sched_domain sysctl entries for all possible CPUs. This is visible to the user if the kernel is booted with maxcpus=n, or if ACPI tables have been modified to leave CPUs offline, and then checking for missing /proc/sys/kernel/sched_domain/cpu* entries. Fix this by separating the allocation and initialization, and adding a flag to initialize the possible CPU entries while system booting only. Tested-by:
Syuuichirou Ishii <ishii.shuuichir@jp.fujitsu.com> Tested-by:
Tarumizu, Kohei <tarumizu.kohei@jp.fujitsu.com> Signed-off-by:
Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by:
Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Acked-by:
Joe Lawrence <joe.lawrence@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masayoshi Mizuma <msys.mizuma@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190129151245.5073-1-msys.mizuma@gmail.comSigned-off-by:
-
