saddr and daddr are set but not used.

Fixes: ba44f818 ("raw: use more conventional iterators")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220622032303.159394-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add support multi-gigabit and single-port Ethernet
PHY transceiver (AQR113C).
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Link: https://lore.kernel.org/r/20220621034027.56508-1-vbhadram@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use the recently introduced mdiodev accessors for the lynx PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1o3Zd8-002yHI-G2@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

there is an unexpected word "the" in the comments that need to be dropped

file: ./drivers/isdn/hardware/mISDN/hfcsusb.c
line: 1560
 /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
changed to
 /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220621114529.108079-1-jiangjian@cdjrlc.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

there is an unexpected word "the" in the comments that need to be removed
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220621085001.61320-1-jiangjian@cdjrlc.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

there is an unexpected word "the" in the comments that need to be removed
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220621084537.58402-1-jiangjian@cdjrlc.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove unnecessary void* type castings.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Acked-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20220621021648.2544-1-yuzhe@nfschina.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kuniyuki Iwashima says:

====================
af_unix: Introduce per-netns socket hash table.

This series replaces unix_socket_table with a per-netns hash table and
reduces lock contention and time on iterating over the list.

Note the 3rd-6th patches can be a single patch, but for ease of review,
they are split into small changes without breakage.

Changes:
  v3:
    6th:
      * Remove unix_table_locks from comments.
      * Remove missed spin_unlock(&unix_table_locks) in
        unix_lookup_by_ino() (kernel test robot)

  v2: https://lore.kernel.org/netdev/20220620185151.65294-1-kuniyu@amazon.com/
    3rd:
      * Update changelog
      * Remove holes from per-netns hash table structure
      * Use kvmalloc_array() instead of kmalloc() (Eric Dumazet)
      * Remove unnecessary parts in af_unix_init() (Eric Dumazet)
      * Move `err_sysctl` label into ifdef block (kernel test robot)
      * Remove struct netns_unix from struct net if CONFIG_UNIX is disabled
    4th:
      * Use spin_lock_nested() (kernel test robot)

  v1: https://lore.kernel.org/netdev/20220616234714.4291-1-kuniyu@amazon.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

unix_table_locks are to protect the global hash table, unix_socket_table.
The previous commit removed it, so let's clean up the unnecessary locks.

Here is a test result on EC2 c5.9xlarge where 10 processes run concurrently
in different netns and bind 100,000 sockets for each.

  without this series : 1m 38s
  with this series    :    11s

It is ~10x faster because the global hash table is split into 10 netns in
this case.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This commit replaces the global hash table with a per-netns one and removes
the global one.

We now link a socket in each netns's hash table so we can save some netns
comparisons when iterating through a hash bucket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This commit adds extra spin_lock/spin_unlock() for a per-netns
hash table inside the existing ones for unix_table_locks.

As of this commit, sockets are still linked in the global hash
table.  After putting sockets in a per-netns hash table and
removing the old one in the next patch, we remove the global
locks in the last patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This commit adds a per netns hash table for AF_UNIX, which size is fixed
as UNIX_HASH_SIZE for now.

The first implementation defines a per-netns hash table as a single array
of lock and list:

	struct unix_hashbucket {
		spinlock_t		lock;
		struct hlist_head	head;
	};

	struct netns_unix {
		struct unix_hashbucket	*hash;
		...
	};

But, Eric pointed out memory cost that the structure has holes because of
sizeof(spinlock_t), which is 4 (or more if LOCKDEP is enabled). [0]  It
could be expensive on a host with thousands of netns and few AF_UNIX
sockets.  For this reason, a per-netns hash table uses two dense arrays.

	struct unix_table {
		spinlock_t		*locks;
		struct hlist_head	*buckets;
	};

	struct netns_unix {
		struct unix_table	table;
		...
	};

Note the length of the list has a significant impact rather than lock
contention, so having shared locks can be an option.  But, per-netns
locks and lists still perform better than the global locks and per-netns
lists. [1]

Also, this patch adds a change so that struct netns_unix disappears from
struct net if CONFIG_UNIX is disabled.

[0]: https://lore.kernel.org/netdev/CANn89iLVxO5aqx16azNU7p7Z-nz5NrnM5QTqOzueVxEnkVTxyg@mail.gmail.com/
[1]: https://lore.kernel.org/netdev/20220617175215.1769-1-kuniyu@amazon.com/Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the size of AF_UNIX hash table is UNIX_HASH_SIZE * 2,
the first half for bind()ed sockets and the second half for unbound
ones.  UNIX_HASH_SIZE * 2 is used to define the table and iterate
over it.

In some places, we use ARRAY_SIZE(unix_socket_table) instead of
UNIX_HASH_SIZE * 2.  However, we cannot use it anymore because we
will allocate the hash table dynamically.  Then, we would have to
add UNIX_HASH_SIZE * 2 in many places, which would be troublesome.

This patch adapts the UNIX_HASH_SIZE definition to include bound
and unbound sockets and defines a new UNIX_HASH_MOD macro to ease
calculations.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some functions define a net pointer only for one-shot use.  Others call
sock_net() redundantly even when a net pointer is available.  Let's fix
these and make the code simpler.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Unified bridge conversion - part 2/6

This is the second part of the conversion of mlxsw to the unified bridge
model. Part 1 was merged in commit 4336487e ("Merge branch
'mlxsw-unified-bridge-conversion-part-1'") which includes details about
the new model and the motivation behind the conversion.

This patchset does not begin the conversion, but rather prepares the code
base for it.

Patchset overview:

Patch #1 removes an unnecessary field from one of the FID families.

Patches #2-#7 make various improvements in the layer 2 multicast code,
making it more receptive towards upcoming changes.

Patches #8-#10 prepare the CONFIG_PROFILE command for the unified bridge
model. This command will be used to enable the new model in the last
patchset.

Patches #11-#13 perform small changes in the FID code, preparing it for
upcoming changes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

rFID and dummy FID do not support FID->VNI mapping. Currently, these
families do not implement the vni_{set, clear}() operations. Instead, there
is a check if these functions are implemented.

Similarly, 'SFMR.nve_tunnel_flood_ptr' is not relevant for rFID and dummy
FID, therefore, these families do not implement
nve_flood_index_{set, clear}().

Align the behavior to other unsupported operations, implement the functions
and just return an error or warn. Then, checks like '!ops->vni_set' can be
removed.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The previous patch added 'fid_offset' field to FID structure. Now, this
field can be used when VNI is set using SFMR register. Currently
'fid_offset' is set to zero, instead, use the new field which is now set
to zero and in the future will be changed.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SFMR register contains a 'fid_offset' field which is used when flooding
tables of type FID offset are used.

Currently, the driver sets this field to zero, as flooding tables of type
FID are used.

Using unified bridge model, the driver will use FID offset flooding
tables. As preparation, add 'fid_offset' to 'struct mlxsw_sp_fid'. Then,
use this field instead of passing zero to the function that configures
SFMR.

Set the new field as part of 'ops->setup()', for that, implement this
function for dummy FID and rFID.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, as part of mlxsw_pci_init(), resources are queried from firmware
before issuing the 'CONFIG_PROFILE' command.

There are resources whose size depend on the enablement of the unified
bridge model that is performed via 'CONFIG_PROFILE' command. As a
preparation for unified bridge model, add an additional query after issuing
this command. Both queries are required as KVD sizes are read from
firmware and then are configured as part of 'CONFIG_PROFILE' command.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the length of 'config_profile.flood_mode' is defined as 2
bits, while the correct length is 3 bits.

As preparation for unified bridge model, which will use the whole field
length, fix it and increase the field to the correct size.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently magic constant is used for setting 'flood_mode' as part of
config profile.

As preparation for unified bridge model, which will require different
'flood_mode', add a dedicated enumerator for this field and use it as
part of 'struct mlxsw_config_profile'.

Add the relevant value for unified bridge model.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The above mentioned function calls two functions which return values, but
it ignores them.

Check if the return value is an error, handle it in such case and return
an error back to the caller.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function returns 'false' upon failure and 'true' upon success.
Convert it to the usual scheme of returning integer error codes and
align the callers.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The above mentioned function just returns an error in case that
mlxsw_sp_bridge_ports_flood_table_set() fails. That means that the previous
configurations are not cleaned.

Fix it by adding error path to clean the configurations in case of error.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The above mentioned function is called for each port in bridge when the
multicast behavior is changed. Currently, it updates all the relevant
MID entries only for the first call, but the update of flooding per port
is done only for the port that it was called for it.

To simplify this behavior, it is possible to handle flooding for all the
ports in the first call, then, the other calls will do nothing. For
that, new functions are required to set flooding for all ports, no
'struct mlxsw_sp_port' is required.

This issue was found while extending this function for unified bridge
model, the above mentioned change will ease the extending later.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function mlxsw_sp_port_mc_disabled_set() sets
'bridge_device->multicast_enabled' twice. Remove the unnecessary setting.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the above mentioned function gets 'struct mlxsw_sp_port',
while the only use of this structure is to get 'mlxsw_sp_port->mlxsw_sp'.

Instead, pass 'struct mlxsw_sp'.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently 'struct mlxsw_sp_fid_family' has a field which indicates if
'lag_vid' is valid for use in SFD register.

This is a leftover from using .1Q FIDs instead of emulating them using
.1D FIDs.

Currently when .1Q FIDs are emulated using .1D FIDs, this field is true
for both families, so there is no reason to maintain it.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert MSE (mean-square error) values to SNR and split it SQI (Signal Quality
Indicator) ranges. The used ranges are taken from "OPEN ALLIANCE - Advanced
diagnostic features for 100BASE-T1 automotive Ethernet PHYs"
specification.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220620115601.2035452-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit 4c0d2e96 ("net: phy: consider that suspend2ram may cut
off PHY power"), phy_init_hw() invokes both, the ->config_init() and
->config_intr() callbacks.

In the SMSC PHY driver, the latter acknowledges stale interrupts, hence
there's no longer a need to acknowledge them in the former as well.

There are no other callers of ->config_init() besides phy_init_hw().

Drop the redundant code.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/0254edf48bddc96c6248c4414043a3699e94614a.1655716767.git.lukas@wunner.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Arun Ramadoss says:

====================
net: dsa: microchip: common spi probe for the ksz series switches - part 1

This patch series aims to refactor the ksz_switch_register routine to have the
common flow for the ksz series switch. At present ksz8795.c & ksz9477.c have
its own dsa_switch_ops and switch detect functionality.
In ksz_switch_register, ksz_dev_ops is assigned based on the function parameter
passed by the individual ksz8/ksz9477 switch register function. And then switch
detect is performed based on the ksz_dev_ops.detect hook.  This patch modifies
the ksz_switch_register such a way that switch detect is performed first, based
on the chip ksz_dev_ops is assigned to ksz_device structure. It ensures the
common flow for the existing as well as LAN937x switches.
In the next series of patch, it will move ksz_dsa_ops and dsa_switch_ops
from ksz8795.c and ksz9477.c to ksz_common.c and have the common spi
probe all the ksz based switches.

Changes in v1
- Splitted the patch series into two.
- Replaced all occurrence of REG_PORT_STATUS_0 and PORT_FIBER_MODE to
  KSZ8_PORT_STATUS_0 and KSZ8_PORT_FIBER_MODE.
- Separated the tag protocol and phy read/write patch into two.
- Assigned the DSA_TAG_PROTO_NONE as the default value for get_tag_protocol hook.
- Reduced the indentation level by using the if(!dev->dev_ops->mirror_add).
- Added the stp_ctrl_reg as a member in ksz_chip_data and removed the member
  in ksz_dev_ops.
- Removed the r_dyn_mac_table, r_sta_mac_table and w_sta_mac_table from the
  ksz_dev_ops since it is used only in the ksz8795.c.

Changes in RFC v2
- Fixed the compilation issue.
- Reduced the patch set to 15.
====================
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220617084255.19376-1-arun.ramadoss@microchip.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This patch assigns the get_phy_flags & mtu  hook of ksz8795 and ksz9477
in dsa_switch_ops to ksz_common.  For get_phy_flags hooks,checks whether
the chip is ksz8863/kss8793 then it returns error for port1.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This patch makes the dsa_switch_hook for fdbs to use ksz_common.c file.
And from ksz_common, individual switches fdb functions are called using
the dev->dev_ops. And removed the r_dyn_mac_table, r_sta_mac_table and
w_sta_mac_table from ksz_dev_ops as it is used only in ksz8795.c
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ksz_mdb_add/del in ksz_common.c is specific for the ksz8795.c file. The
ksz9477 has its separate ksz9477_port_mdb_add/del functions.  This patch
moves the ksz8795 specific mdb functionality from ksz_common to ksz8795.
And this dsa_switch_ops hooks for ksz8795/ksz9477 are invoked through
the ksz_port_mdb_add/del.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This patch assigns the phylink_get_caps in ksz8795 and ksz9477 to
ksz_phylink_get_caps. And update their mac_capabilities in the
respective ksz_dev_ops.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

At present, P_STP_CTRL register value is passed as parameter to
ksz_port_stp_state from the individual dsa_switch_ops hooks. This patch
update the function to retrieve the register value through the
ksz_chip_data member.
And add the static to ksz_update_port_member since it is not called
outside the ksz_common.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This patch updates the common port mirror add/del dsa_switch_ops in
ksz_common.c. The individual switches implementation is executed based
on the ksz_dev_ops function pointers.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This patch moves the vlan dsa_switch_ops such as vlan_add, vlan_del and
vlan_filtering from the individual files ksz8795.c, ksz9477.c to
ksz_common.c file.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ksz8795 and ksz9477 implementation on phy read/write hooks are
different. This patch modifies the ksz9477 implementation same as
ksz8795 by updating the ksz9477_dev_ops structure.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This patch move the dsa hook get_tag_protocol to ksz_common file. And
the tag_protocol is returned based on the dev->chip_id.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>