- 21 Apr, 2018 6 commits
-
-
Ioan Nicu authored
Some of the mport_dma_req structure members were initialized late inside the do_dma_request() function, just before submitting the request to the dma engine. But we have some error branches before that. In case of such an error, the code would return on the error path and trigger the calling of dma_req_free() with a req structure which is not completely initialized. This causes a NULL pointer dereference in dma_req_free(). This patch fixes these error branches by making sure that all necessary mport_dma_req structure members are initialized in rio_dma_transfer() immediately after the request structure gets allocated. Link: http://lkml.kernel.org/r/20180412150605.GA31409@nokia.com Fixes: bbd876ad ("rapidio: use a reference count for struct mport_dma_req") Signed-off-by:
Ioan Nicu <ioan.nicu.ext@nokia.com> Tested-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Acked-by:
Alexandre Bounine <alex.bou9@gmail.com> Cc: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Frank Kunz <frank.kunz@nokia.com> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Naoya Horiguchi authored
My testing for the latest kernel supporting thp migration showed an infinite loop in offlining the memory block that is filled with shmem thps. We can get out of the loop with a signal, but kernel should return with failure in this case. What happens in the loop is that scan_movable_pages() repeats returning the same pfn without any progress. That's because page migration always fails for shmem thps. In memory offline code, memory blocks containing unmovable pages should be prevented from being offline targets by has_unmovable_pages() inside start_isolate_page_range(). So it's possible to change migratability for non-anonymous thps to avoid the issue, but it introduces more complex and thp-specific handling in migration code, so it might not good. So this patch is suggesting to fix the issue by enabling thp migration for shmem thp. Both of anon/shmem thp are migratable so we don't need precheck about the type of thps. Link: http://lkml.kernel.org/r/20180406030706.GA2434@hori1.linux.bs1.fc.nec.co.jp Fixes: commit 72b39cfc ("mm, memory_hotplug: do not fail offlining too early") Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Zi Yan <zi.yan@sent.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Thelen authored
lock_page_memcg()/unlock_page_memcg() use spin_lock_irqsave/restore() if the page's memcg is undergoing move accounting, which occurs when a process leaves its memcg for a new one that has memory.move_charge_at_immigrate set. unlocked_inode_to_wb_begin,end() use spin_lock_irq/spin_unlock_irq() if the given inode is switching writeback domains. Switches occur when enough writes are issued from a new domain. This existing pattern is thus suspicious: lock_page_memcg(page); unlocked_inode_to_wb_begin(inode, &locked); ... unlocked_inode_to_wb_end(inode, locked); unlock_page_memcg(page); If both inode switch and process memcg migration are both in-flight then unlocked_inode_to_wb_end() will unconditionally enable interrupts while still holding the lock_page_memcg() irq spinlock. This suggests the possibility of deadlock if an interrupt occurs before unlock_page_memcg(). truncate __cancel_dirty_page lock_page_memcg unlocked_inode_to_wb_begin unlocked_inode_to_wb_end <interrupts mistakenly enabled> <interrupt> end_page_writeback test_clear_page_writeback lock_page_memcg <deadlock> unlock_page_memcg Due to configuration limitations this deadlock is not currently possible because we don't mix cgroup writeback (a cgroupv2 feature) and memory.move_charge_at_immigrate (a cgroupv1 feature). If the kernel is hacked to always claim inode switching and memcg moving_account, then this script triggers lockup in less than a minute: cd /mnt/cgroup/memory mkdir a b echo 1 > a/memory.move_charge_at_immigrate echo 1 > b/memory.move_charge_at_immigrate ( echo $BASHPID > a/cgroup.procs while true; do dd if=/dev/zero of=/mnt/big bs=1M count=256 done ) & while true; do sync done & sleep 1h & SLEEP=$! while true; do echo $SLEEP > a/cgroup.procs echo $SLEEP > b/cgroup.procs done The deadlock does not seem possible, so it's debatable if there's any reason to modify the kernel. I suggest we should to prevent future surprises. And Wang Long said "this deadlock occurs three times in our environment", so there's more reason to apply this, even to stable. Stable 4.4 has minor conflicts applying this patch. For a clean 4.4 patch see "[PATCH for-4.4] writeback: safer lock nesting" https://lkml.org/lkml/2018/4/11/146 Wang Long said "this deadlock occurs three times in our environment" [gthelen@google.com: v4] Link: http://lkml.kernel.org/r/20180411084653.254724-1-gthelen@google.com [akpm@linux-foundation.org: comment tweaks, struct initialization simplification] Change-Id: Ibb773e8045852978f6207074491d262f1b3fb613 Link: http://lkml.kernel.org/r/20180410005908.167976-1-gthelen@google.com Fixes: 682aa8e1 ("writeback: implement unlocked_inode_to_wb transaction and use it for stat updates") Signed-off-by:
Greg Thelen <gthelen@google.com> Reported-by:
Wang Long <wanglong19@meituan.com> Acked-by:
Wang Long <wanglong19@meituan.com> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: <stable@vger.kernel.org> [v4.2+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Huang Ying authored
The swap offset reported by /proc/<pid>/pagemap may be not correct for PMD migration entries. If addr passed into pagemap_pmd_range() isn't aligned with PMD start address, the swap offset reported doesn't reflect this. And in the loop to report information of each sub-page, the swap offset isn't increased accordingly as that for PFN. This may happen after opening /proc/<pid>/pagemap and seeking to a page whose address doesn't align with a PMD start address. I have verified this with a simple test program. BTW: migration swap entries have PFN information, do we need to restrict whether to show them? [akpm@linux-foundation.org: fix typo, per Huang, Ying] Link: http://lkml.kernel.org/r/20180408033737.10897-1-ying.huang@intel.comSigned-off-by:
"Huang, Ying" <ying.huang@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrei Vagin <avagin@openvz.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "Jerome Glisse" <jglisse@redhat.com> Cc: Daniel Colascione <dancol@google.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michal Hocko authored
Li Wang has reported that LTP move_pages04 test fails with the current tree: LTP move_pages04: TFAIL : move_pages04.c:143: status[1] is EPERM, expected EFAULT The test allocates an array of two pages, one is present while the other is not (resp. backed by zero page) and it expects EFAULT for the second page as the man page suggests. We are reporting EPERM which doesn't make any sense and this is a result of a bug from cf5f16b23ec9 ("mm: unclutter THP migration"). do_pages_move tries to handle as many pages in one batch as possible so we queue all pages with the same node target together and that corresponds to [start, i] range which is then used to update status array. add_page_for_migration will correctly notice the zero (resp. !present) page and returns with EFAULT which gets written to the status. But if this is the last page in the array we do not update start and so the last store_status after the loop will overwrite the range of the last batch with NUMA_NO_NODE (which corresponds to EPERM). Fix this by simply bailing out from the last flush if the pagelist is empty as there is clearly nothing more to do. Link: http://lkml.kernel.org/r/20180418121255.334-1-mhocko@kernel.org Fixes: cf5f16b23ec9 ("mm: unclutter THP migration") Signed-off-by:
Michal Hocko <mhocko@suse.com> Reported-by:
Li Wang <liwang@redhat.com> Tested-by:
Li Wang <liwang@redhat.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kees Cook authored
One of the classes of kernel stack content leaks[1] is exposing the contents of prior heap or stack contents when a new process stack is allocated. Normally, those stacks are not zeroed, and the old contents remain in place. In the face of stack content exposure flaws, those contents can leak to userspace. Fixing this will make the kernel no longer vulnerable to these flaws, as the stack will be wiped each time a stack is assigned to a new process. There's not a meaningful change in runtime performance; it almost looks like it provides a benefit. Performing back-to-back kernel builds before: Run times: 157.86 157.09 158.90 160.94 160.80 Mean: 159.12 Std Dev: 1.54 and after: Run times: 159.31 157.34 156.71 158.15 160.81 Mean: 158.46 Std Dev: 1.46 Instead of making this a build or runtime config, Andy Lutomirski recommended this just be enabled by default. [1] A noisy search for many kinds of stack content leaks can be seen here: https://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=linux+kernel+stack+leak I did some more with perf and cycle counts on running 100,000 execs of /bin/true. before: Cycles: 218858861551 218853036130 214727610969 227656844122 224980542841 Mean: 221015379122.60 Std Dev: 4662486552.47 after: Cycles: 213868945060 213119275204 211820169456 224426673259 225489986348 Mean: 217745009865.40 Std Dev: 5935559279.99 It continues to look like it's faster, though the deviation is rather wide, but I'm not sure what I could do that would be less noisy. I'm open to ideas! Link: http://lkml.kernel.org/r/20180221021659.GA37073@beastSigned-off-by:
Kees Cook <keescook@chromium.org> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 20 Apr, 2018 13 commits
-
-
David Howells authored
In do_mount() when the MS_* flags are being converted to MNT_* flags, MS_RDONLY got accidentally convered to SB_RDONLY. Undo this change. Fixes: e462ec50 ("VFS: Differentiate mount flags (MS_*) from internal superblock flags") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
AFS server records get removed from the net->fs_servers tree when they're deleted, but not from the net->fs_addresses{4,6} lists, which can lead to an oops in afs_find_server() when a server record has been removed, for instance during rmmod. Fix this by deleting the record from the by-address lists before posting it for RCU destruction. The reason this hasn't been noticed before is that the fileserver keeps probing the local cache manager, thereby keeping the service record alive, so the oops would only happen when a fileserver eventually gets bored and stops pinging or if the module gets rmmod'd and a call comes in from the fileserver during the window between the server records being destroyed and the socket being closed. The oops looks something like: BUG: unable to handle kernel NULL pointer dereference at 000000000000001c ... Workqueue: kafsd afs_process_async_call [kafs] RIP: 0010:afs_find_server+0x271/0x36f [kafs] ... Call Trace: afs_deliver_cb_init_call_back_state3+0x1f2/0x21f [kafs] afs_deliver_to_call+0x1ee/0x5e8 [kafs] afs_process_async_call+0x5b/0xd0 [kafs] process_one_work+0x2c2/0x504 worker_thread+0x1d4/0x2ac kthread+0x11f/0x127 ret_from_fork+0x24/0x30 Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Unbalanced refcounting in TIPC, from Jon Maloy. 2) Only allow TCP_MD5SIG to be set on sockets in close or listen state. Once the connection is established it makes no sense to change this. From Eric Dumazet. 3) Missing attribute validation in neigh_dump_table(), also from Eric Dumazet. 4) Fix address comparisons in SCTP, from Xin Long. 5) Neigh proxy table clearing can deadlock, from Wolfgang Bumiller. 6) Fix tunnel refcounting in l2tp, from Guillaume Nault. 7) Fix double list insert in team driver, from Paolo Abeni. 8) af_vsock.ko module was accidently made unremovable, from Stefan Hajnoczi. 9) Fix reference to freed llc_sap object in llc stack, from Cong Wang. 10) Don't assume netdevice struct is DMA'able memory in virtio_net driver, from Michael S. Tsirkin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits) net/smc: fix shutdown in state SMC_LISTEN bnxt_en: Fix memory fault in bnxt_ethtool_init() virtio_net: sparse annotation fix virtio_net: fix adding vids on big-endian virtio_net: split out ctrl buffer net: hns: Avoid action name truncation docs: ip-sysctl.txt: fix name of some ipv6 variables vmxnet3: fix incorrect dereference when rxvlan is disabled llc: hold llc_sap before release_sock() MAINTAINERS: Direct networking documentation changes to netdev atm: iphase: fix spelling mistake: "Tansmit" -> "Transmit" net: qmi_wwan: add Wistron Neweb D19Q1 net: caif: fix spelling mistake "UKNOWN" -> "UNKNOWN" net: stmmac: Disable ACS Feature for GMAC >= 4 net: mvpp2: Fix DMA address mask size net: change the comment of dev_mc_init net: qualcomm: rmnet: Fix warning seen with fill_info tun: fix vlan packet truncation tipc: fix infinite loop when dumping link monitor summary tipc: fix use-after-free in tipc_nametbl_stop ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "Assorted fixes. Some of that is only a matter with fault injection (broken handling of small allocation failure in various mount-related places), but the last one is a root-triggerable stack overflow, and combined with userns it gets really nasty ;-/" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Don't leak MNT_INTERNAL away from internal mounts mm,vmscan: Allow preallocating memory for register_shrinker(). rpc_pipefs: fix double-dput() orangefs_kill_sb(): deal with allocation failures jffs2_kill_sb(): deal with failed allocations hypfs_kill_super(): deal with failed allocations
-
Linus Torvalds authored
Merge tag 'ecryptfs-4.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull eCryptfs fixes from Tyler Hicks: "Minor cleanups and a bug fix to completely ignore unencrypted filenames in the lower filesystem when filename encryption is enabled at the eCryptfs layer" * tag 'ecryptfs-4.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: don't pass up plaintext names when using filename encryption ecryptfs: fix spelling mistake: "cadidate" -> "candidate" ecryptfs: lookup: Don't check if mount_crypt_stat is NULL
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
- isofs memory leak fix - two fsnotify fixes of event mask handling - udf fix of UTF-16 handling - couple other smaller cleanups * tag 'for_v4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Fix leak of UTF-16 surrogates into encoded strings fs: ext2: Adding new return type vm_fault_t isofs: fix potential memory leak in mount option parsing MAINTAINERS: add an entry for FSNOTIFY infrastructure fsnotify: fix typo in a comment about mark->g_list fsnotify: fix ignore mask logic in send_to_group() isofs compress: Remove VLA usage fs: quota: Replace GFP_ATOMIC with GFP_KERNEL in dquot_init fanotify: fix logic of events on child
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID updates from Jiri Kosina: - suspend/resume handling fix for Raydium I2C-connected touchscreen from Aaron Ma - protocol fixup for certain BT-connected Wacoms from Aaron Armstrong Skomra - battery level reporting fix on BT-connected mice from Dmitry Torokhov - hidraw race condition fix from Rodrigo Rivas Costa * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: i2c-hid: fix inverted return value from i2c_hid_command() HID: i2c-hid: Fix resume issue on Raydium touchscreen device HID: wacom: bluetooth: send exit report for recent Bluetooth devices HID: hidraw: Fix crash on HIDIOCGFEATURE with a destroyed device HID: input: fix battery level reporting on BT mice
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatchingLinus Torvalds authored
Pull livepatching fix from Jiri Kosina: "Shadow variable API list_head initialization fix from Petr Mladek" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: Allow to call a custom callback when freeing shadow variables livepatch: Initialize shadow variables safely by a custom callback
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: - some fixes of kmalloc() flags - one fix of the xenbus driver - an update of the pv sound driver interface needed for a driver which will go through the sound tree * tag 'for-linus-4.17-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: xenbus_dev_frontend: Really return response string xen/sndif: Sync up with the canonical definition in Xen xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_reg_add xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in xen_pcibk_config_quirks_init xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_device_alloc xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_init_device xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_probe
-
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mipsLinus Torvalds authored
Pull MIPS fixes from James Hogan: - io: Add barriers to read*() & write*() - dts: Fix boston PCI bus DTC warnings (4.17) - memset: Several corner case fixes (one 3.10, others longer) * tag 'mips_fixes_4.17_1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: uaccess: Add micromips clobbers to bzero invocation MIPS: memset.S: Fix clobber of v1 in last_fixup MIPS: memset.S: Fix return of __clear_user from Lpartial_fixup MIPS: memset.S: EVA & fault support for small_memset MIPS: dts: Boston: Fix PCI bus dtc warnings: MIPS: io: Add barrier after register read in readX() MIPS: io: Prevent compiler reordering writeX()
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix an off-by-one bug in our alternative asm patching which leads to incorrectly patched code. This bug lay dormant for nearly 10 years but we finally hit it due to a recent change. - Fix lockups when running KVM guests on Power8 due to a missing check when a thread that's running KVM comes out of idle. - Fix an out-of-spec behaviour in the XIVE code (P9 interrupt controller). - Fix EEH handling of bridge MMIO windows. - Prevent crashes in our RFI fallback flush handler if firmware didn't tell us the size of the L1 cache (only seen on simulators). Thanks to: Benjamin Herrenschmidt, Madhavan Srinivasan, Michael Neuling. * tag 'powerpc-4.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/kvm: Fix lockups when running KVM guests on Power8 powerpc/eeh: Fix enabling bridge MMIO windows powerpc/xive: Fix trying to "push" an already active pool VP powerpc/64s: Default l1d_size to 64K in RFI fallback flush powerpc/lib: Fix off-by-one in alternate feature patching
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes and kexec-file-load from Martin Schwidefsky: "After the common code kexec patches went in via Andrew we can now push the architecture parts to implement the kexec-file-load system call. Plus a few more bug fixes and cleanups, this includes an update to the default configurations" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/signal: cleanup uapi struct sigaction s390: rename default_defconfig to debug_defconfig s390: remove gcov defconfig s390: update defconfig s390: add support for IBM z14 Model ZR1 s390: remove couple of duplicate includes s390/boot: remove unused COMPILE_VERSION and ccflags-y s390/nospec: include cpu.h s390/decompressor: Ignore file vmlinux.bin.full s390/kexec_file: add generated files to .gitignore s390/Kconfig: Move kexec config options to "Processor type and features" s390/kexec_file: Add ELF loader s390/kexec_file: Add crash support to image loader s390/kexec_file: Add image loader s390/kexec_file: Add kexec_file_load system call s390/kexec_file: Add purgatory s390/kexec_file: Prepare setup.h for kexec_file_load s390/smsgiucv: disable SMSG on module unload s390/sclp: avoid potential usage of uninitialized value
-
Al Viro authored
We want it only for the stuff created by SB_KERNMOUNT mounts, *not* for their copies. As it is, creating a deep stack of bindings of /proc/*/ns/* somewhere in a new namespace and exiting yields a stack overflow. Cc: stable@kernel.org Reported-by:
Alexander Aring <aring@mojatatu.com> Bisected-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Tested-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Tested-by:
Alexander Aring <aring@mojatatu.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
- 19 Apr, 2018 21 commits
-
-
Ursula Braun authored
Calling shutdown with SHUT_RD and SHUT_RDWR for a listening SMC socket crashes, because commit 127f4970 ("net/smc: release clcsock from tcp_listen_worker") releases the internal clcsock in smc_close_active() and sets smc->clcsock to NULL. For SHUT_RD the smc_close_active() call is removed. For SHUT_RDWR the kernel_sock_shutdown() call is omitted, since the clcsock is already released. Fixes: 127f4970 ("net/smc: release clcsock from tcp_listen_worker") Signed-off-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Reported-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
In some firmware images, the length of BNX_DIR_TYPE_PKG_LOG nvram type could be greater than the fixed buffer length of 4096 bytes allocated by the driver. This was causing HWRM_NVM_READ to copy more data to the buffer than the allocated size, causing general protection fault. Fix the issue by allocating the exact buffer length returned by HWRM_NVM_FIND_DIR_ENTRY, instead of 4096. Move the kzalloc() call into the bnxt_get_pkgver() function. Fixes: 3ebf6f0a ("bnxt_en: Add installed-package firmware version reporting via Ethtool GDRVINFO") Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael S. Tsirkin says: ==================== virtio: ctrl buffer fixes Here are a couple of fixes related to the virtio control buffer. Lightly tested on x86 only. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael S. Tsirkin authored
offloads is a buffer in virtio format, should use the __virtio64 tag. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael S. Tsirkin authored
Programming vids (adding or removing them) still passes guest-endian values in the DMA buffer. That's wrong if guest is big-endian and when virtio 1 is enabled. Note: this is on top of a previous patch: virtio_net: split out ctrl buffer Fixes: 9465a7a6 ("virtio_net: enable v1.0 support") Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael S. Tsirkin authored
When sending control commands, virtio net sets up several buffers for DMA. The buffers are all part of the net device which means it's actually allocated by kvmalloc so it's in theory (on extreme memory pressure) possible to get a vmalloc'ed buffer which on some platforms means we can't DMA there. Fix up by moving the DMA buffers into a separate structure. Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
dann frazier authored
When longer interface names are used, the action names exposed in /proc/interrupts and /proc/irq/* maybe truncated. For example, when using the predictable name algorithm in systemd on a HiSilicon D05, I see: ubuntu@d05-3:~$ grep enahisic2i0-tx /proc/interrupts | sed 's/.* //' enahisic2i0-tx0 enahisic2i0-tx1 [...] enahisic2i0-tx8 enahisic2i0-tx9 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 Increase the max ring name length to allow for an interface name of IFNAMSIZE. After this change, I now see: $ grep enahisic2i0-tx /proc/interrupts | sed 's/.* //' enahisic2i0-tx0 enahisic2i0-tx1 enahisic2i0-tx2 [...] enahisic2i0-tx8 enahisic2i0-tx9 enahisic2i0-tx10 enahisic2i0-tx11 enahisic2i0-tx12 enahisic2i0-tx13 enahisic2i0-tx14 enahisic2i0-tx15 Signed-off-by:
dann frazier <dann.frazier@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Olivier Gayot authored
The name of the following proc/sysctl entries were incorrectly documented: /proc/sys/net/ipv6/conf/<interface>/max_dst_opts_number /proc/sys/net/ipv6/conf/<interface>/max_hbt_opts_number /proc/sys/net/ipv6/conf/<interface>/max_dst_opts_length /proc/sys/net/ipv6/conf/<interface>/max_hbt_length Their name was set to the name of the symbol in the .data field of the control table instead of their .proc name. Signed-off-by:
Olivier Gayot <olivier.gayot@sigexec.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ronak Doshi authored
vmxnet3_get_hdr_len() is used to calculate the header length which in turn is used to calculate the gso_size for skb. When rxvlan offload is disabled, vlan tag is present in the header and the function references ip header from sizeof(ethhdr) and leads to incorrect pointer reference. This patch fixes this issue by taking sizeof(vlan_ethhdr) into account if vlan tag is present and correctly references the ip hdr. Signed-off-by:
Ronak Doshi <doshir@vmware.com> Acked-by:
Guolin Yang <gyang@vmware.com> Acked-by:
Louis Luo <llouis@vmware.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Cong Wang authored
syzbot reported we still access llc->sap in llc_backlog_rcv() after it is freed in llc_sap_remove_socket(): Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430 llc_conn_ac_send_sabme_cmd_p_set_x+0x3a8/0x460 net/llc/llc_c_ac.c:785 llc_exec_conn_trans_actions net/llc/llc_conn.c:475 [inline] llc_conn_service net/llc/llc_conn.c:400 [inline] llc_conn_state_process+0x4e1/0x13a0 net/llc/llc_conn.c:75 llc_backlog_rcv+0x195/0x1e0 net/llc/llc_conn.c:891 sk_backlog_rcv include/net/sock.h:909 [inline] __release_sock+0x12f/0x3a0 net/core/sock.c:2335 release_sock+0xa4/0x2b0 net/core/sock.c:2850 llc_ui_release+0xc8/0x220 net/llc/af_llc.c:204 llc->sap is refcount'ed and llc_sap_remove_socket() is paired with llc_sap_add_socket(). This can be amended by holding its refcount before llc_sap_remove_socket() and releasing it after release_sock(). Reported-by: <syzbot+6e181fc95081c2cf9051@syzkaller.appspotmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jonathan Corbet authored
Networking docs changes go through the networking tree, so patch the MAINTAINERS file to direct authors to the right place. Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Trivial fix to spelling mistake in message text. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pawel Dembicki authored
This modem is embedded on dlink dwr-960 router. The oem configuration states: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=d191 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by:
Pawel Dembicki <paweldembicki@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Trivial fix to spelling mistake Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
ACS Feature is currently enabled for GMAC >= 4 but the llc_snap status is never checked in descriptor rx_status callback. This will cause stmmac to always strip packets even that ACS feature is already stripping them. Lets be safe and disable the ACS feature for GMAC >= 4 and always strip the packets for this GMAC version. Fixes: 477286b5 ("stmmac: add GMAC4 core support") Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
PPv2 TX/RX descriptors uses 40bits DMA addresses, but 41 bits masks were used (GENMASK_ULL(40, 0)). This commit fixes that by using the correct mask. Fixes: e7c5359f ("net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
sunlianwen authored
The comment of dev_mc_init() is wrong. which use dev_mc_flush instead of dev_mc_init. Signed-off-by: Lianwen Sun <sunlw.fnst@cn.fujitsu.com Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Kosina authored
i2c_hid_command() returns non-zero in error cases (the actual errno). Error handling in for I2C_HID_QUIRK_RESEND_REPORT_DESCR case in i2c_hid_resume() had the check inverted; fix that. Fixes: 3e83eda4 ("HID: i2c-hid: Fix resume issue on Raydium touchscreen device") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Michael Ellerman authored
When running KVM guests on Power8 we can see a lockup where one CPU stops responding. This often leads to a message such as: watchdog: CPU 136 detected hard LOCKUP on other CPUs 72 Task dump for CPU 72: qemu-system-ppc R running task 10560 20917 20908 0x00040004 And then backtraces on other CPUs, such as: Task dump for CPU 48: ksmd R running task 10032 1519 2 0x00000804 Call Trace: ... --- interrupt: 901 at smp_call_function_many+0x3c8/0x460 LR = smp_call_function_many+0x37c/0x460 pmdp_invalidate+0x100/0x1b0 __split_huge_pmd+0x52c/0xdb0 try_to_unmap_one+0x764/0x8b0 rmap_walk_anon+0x15c/0x370 try_to_unmap+0xb4/0x170 split_huge_page_to_list+0x148/0xa30 try_to_merge_one_page+0xc8/0x990 try_to_merge_with_ksm_page+0x74/0xf0 ksm_scan_thread+0x10ec/0x1ac0 kthread+0x160/0x1a0 ret_from_kernel_thread+0x5c/0x78 This is caused by commit 8c1c7fb0 ("powerpc/64s/idle: avoid sync for KVM state when waking from idle"), which added a check in pnv_powersave_wakeup() to see if the kvm_hstate.hwthread_state is already set to KVM_HWTHREAD_IN_KERNEL, and if so to skip the store and test of kvm_hstate.hwthread_req. The problem is that the primary does not set KVM_HWTHREAD_IN_KVM when entering the guest, so it can then come out to cede with KVM_HWTHREAD_IN_KERNEL set. It can then go idle in kvm_do_nap after setting hwthread_req to 1, but because hwthread_state is still KVM_HWTHREAD_IN_KERNEL we will skip the test of hwthread_req when we wake up from idle and won't go to kvm_start_guest. From there the thread will return somewhere garbage and crash. Fix it by skipping the store of hwthread_state, but not the test of hwthread_req, when coming out of idle. It's OK to skip the sync in that case because hwthread_req will have been set on the same thread, so there is no synchronisation required. Fixes: 8c1c7fb0 ("powerpc/64s/idle: avoid sync for KVM state when waking from idle") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Neuling authored
On boot we save the configuration space of PCIe bridges. We do this so when we get an EEH event and everything gets reset that we can restore them. Unfortunately we save this state before we've enabled the MMIO space on the bridges. Hence if we have to reset the bridge when we come back MMIO is not enabled and we end up taking an PE freeze when the driver starts accessing again. This patch forces the memory/MMIO and bus mastering on when restoring bridges on EEH. Ideally we'd do this correctly by saving the configuration space writes later, but that will have to come later in a larger EEH rewrite. For now we have this simple fix. The original bug can be triggered on a boston machine by doing: echo 0x8000000000000000 > /sys/kernel/debug/powerpc/PCI0001/err_injct_outbound On boston, this PHB has a PCIe switch on it. Without this patch, you'll see two EEH events, 1 expected and 1 the failure we are fixing here. The second EEH event causes the anything under the PHB to disappear (i.e. the i40e eth). With this patch, only 1 EEH event occurs and devices properly recover. Fixes: 652defed ("powerpc/eeh: Check PCIe link after reset") Cc: stable@vger.kernel.org # v3.11+ Reported-by:
Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com> Signed-off-by:
Michael Neuling <mikey@neuling.org> Acked-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Subash Abhinov Kasiviswanathan authored
When the last rmnet device attached to a real device is removed, the real device is unregistered from rmnet. As a result, the real device lookup fails resulting in a warning when the fill_info handler is called as part of the rmnet device unregistration. Fix this by returning the rmnet flags as 0 when no real device is present. WARNING: CPU: 0 PID: 1779 at net/core/rtnetlink.c:3254 rtmsg_ifinfo_build_skb+0xca/0x10d Modules linked in: CPU: 0 PID: 1779 Comm: ip Not tainted 4.16.0-11872-g7ce23672 #1 Stack: 7fe655f0 60371ea3 00000000 00000000 60282bc6 6006b116 7fe65600 60371ee8 7fe65660 6003a68c 00000000 900000000 Call Trace: [<6006b116>] ? printk+0x0/0x94 [<6001f375>] show_stack+0xfe/0x158 [<60371ea3>] ? dump_stack_print_info+0xe8/0xf1 [<60282bc6>] ? rtmsg_ifinfo_build_skb+0xca/0x10d [<6006b116>] ? printk+0x0/0x94 [<60371ee8>] dump_stack+0x2a/0x2c [<6003a68c>] __warn+0x10e/0x13e [<6003a82c>] warn_slowpath_null+0x48/0x4f [<60282bc6>] rtmsg_ifinfo_build_skb+0xca/0x10d [<60282c4d>] rtmsg_ifinfo_event.part.37+0x1e/0x43 [<60282c2f>] ? rtmsg_ifinfo_event.part.37+0x0/0x43 [<60282d03>] rtmsg_ifinfo+0x24/0x28 [<60264e86>] dev_close_many+0xba/0x119 [<60282cdf>] ? rtmsg_ifinfo+0x0/0x28 [<6027c225>] ? rtnl_is_locked+0x0/0x1c [<6026ca67>] rollback_registered_many+0x1ae/0x4ae [<600314be>] ? unblock_signals+0x0/0xae [<6026cdc0>] ? unregister_netdevice_queue+0x19/0xec [<6026ceec>] unregister_netdevice_many+0x21/0xa1 [<6027c765>] rtnl_delete_link+0x3e/0x4e [<60280ecb>] rtnl_dellink+0x262/0x29c [<6027c241>] ? rtnl_get_link+0x0/0x3e [<6027f867>] rtnetlink_rcv_msg+0x235/0x274 Fixes: be81a85f ("net: qualcomm: rmnet: Implement fill_info") Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-