- 12 Sep, 2012 2 commits
-
-
Jeff Layton authored
commit 3dd4765f upstream. ...and ensure that we tear down the nfs_commit_data cache too when unloading the module. Cc: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> [bwh: Backported to 3.2: drop the nfs_cdata_cachep cleanup; it doesn't exist] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Cyrus Lien authored
commit 2d8767bb upstream. Add Asus All-In-One PC keyboard model AK1D. BugLink: https://bugs.launchpad.net/bugs/1027789Signed-off-by:
Cyrus Lien <cyrus.lien@canonical.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
- 19 Aug, 2012 38 commits
-
-
Ben Hutchings authored
-
Jerome Glisse authored
commit 81ee8fb6 upstream. It seems we can not update the crtc scanout address. After disabling crtc, update to base address do not take effect after crtc being reenable leading to at least frame being scanout from the old crtc base address. Disabling crtc display request lead to same behavior. So after changing the vram address if we don't keep crtc disabled we will have the GPU trying to read some random system memory address with some iommu this will broke the crtc engine and will lead to broken display and iommu error message. So to avoid this, disable crtc. For flicker less boot we will need to avoid moving the vram start address. This patch should also fix : https://bugs.freedesktop.org/show_bug.cgi?id=42373Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit 5b23c904 upstream. Handle the 16 bank case. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> [bwh: Backported to 3.2: adjust context, indentation] Signed-off-by:
-
Alex Deucher authored
commit c8d15edc upstream. Handle the 16 bank case. Signed-off-by:
-
Heiko Carstens authored
commit e8587121 upstream. The native 31 bit and the compat behaviour for the mmap system calls differ: In native 31 bit mode the passed in address for the mmap system call will be unmodified passed to sys_mmap_pgoff(). In compat mode however the passed in address will be modified with compat_ptr() which masks out the most significant bit. The result is that in native 31 bit mode each mmap request (with MAP_FIXED) will fail where the most significat bit is set, while in compat mode it may succeed. This odd behaviour was introduced with d3815898 "[S390] mmap: add missing compat_ptr conversion to both mmap compat syscalls". To restore a consistent behaviour accross native and compat mode this patch functionally reverts the above mentioned commit. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
commit 82aabdb6 upstream. The compat wrappers incorrectly called the non compat versions of the system process_vm system calls. Signed-off-by:
-
Daniel Vetter authored
commit 0d8957c8 upstream. We may only start to set up the new register values after having confirmed that the ring is truely off. Otherwise the hw might lose the newly written register values. This is caught later on in the init sequence, when we check whether the register writes have stuck. Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50522Tested-by:
Yang Guang <guang.a.yang@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Sean Paul authored
commit f01db988 upstream. I have seen a number of "blt ring initialization failed" messages where the ctl or start registers are not the correct value. Upon further inspection, if the code just waited a little bit, it would read the correct value. Adding the wait_for to these reads should eliminate the issue. Signed-off-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Arnd Bergmann authored
commit 4eef6cbf upstream. The EETI touchscreen asserts its IRQ line as soon as it has data in its internal buffers. The line is automatically deasserted once all data has been read via I2C. Hence, the driver has to monitor the GPIO line and cannot simply rely on the interrupt handler reception. In the current implementation of the driver, irq_to_gpio() is used to determine the GPIO number from the i2c_client's IRQ value. As irq_to_gpio() is not available on all platforms, this patch changes this and makes the driver ignore the passed in IRQ. Instead, a GPIO is added to the platform_data struct and gpio_to_irq is used to derive the IRQ from that GPIO. If this fails, bail out. The driver is only able to work in environments where the touchscreen GPIO can be mapped to an IRQ. Without this patch, building raumfeld_defconfig results in: drivers/input/touchscreen/eeti_ts.c: In function 'eeti_ts_irq_active': drivers/input/touchscreen/eeti_ts.c:65:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration] Signed-off-by:
Daniel Mack <zonque@gmail.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Sven Neumann <s.neumann@raumfeld.com> Cc: linux-input@vger.kernel.org Cc: Haojian Zhuang <haojian.zhuang@gmail.com> [bwh: Backported to 3.2: raumfeld_controller_i2c_board_info.irq was initialised using gpio_to_irq(), but this doesn't seem to matter] Signed-off-by:
-
Arnd Bergmann authored
commit 59ee93a5 upstream. The irq_to_gpio function was removed from the pxa platform in linux-3.2, and this driver has been broken since. There is actually no in-tree user of this driver that adds this platform device, but the driver can and does get enabled on some platforms. Without this patch, building ezx_defconfig results in: drivers/mfd/ezx-pcap.c: In function 'pcap_isr_work': drivers/mfd/ezx-pcap.c:205:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration] Signed-off-by:
Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by:
-
David Henningsson authored
commit 012e7eb1 upstream. The same ID is twice in the quirk table, so the second one is not used. Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
David Henningsson authored
commit e9fc83cb upstream. This computer is confirmed working with model=auto on kernel 3.2. Also, parsing fails with hda-emu with the current model. Signed-off-by:
-
Tushar Dave authored
commit b7ec70be upstream. Found that commit d478eb44 was a bad commit. If the link partner is transmitting codeword (even if NULL codeword), then the RXCW.C bit will be set so check for RXCW.CW is unnecessary. Ref: RH BZ 840642 Reported-by:
Fabio Futigami <ffutigam@redhat.com> Signed-off-by:
Tushar Dave <tushar.n.dave@intel.com> CC: Marcelo Ricardo Leitner <mleitner@redhat.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by:
-
Felix Kaechele authored
commit c8415a48 upstream. As with the ThinkPad Models X230 Tablet and T530 the X230 needs a qurik to correctly set up the pins for the dock port. Signed-off-by:
Felix Kaechele <felix@fetzig.org> Signed-off-by:
-
Johannes Berg authored
commit 50e2a30c upstream. There's a bug that causes the rate scaling to get stuck when it has to use single-stream rates with a peer that can do GF and SGI; the two are incompatible so we can't use them together, but that causes the algorithm to not work at all, it always rejects updates. Disable greenfield for now to prevent that problem. Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Tested-by:
Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
Stanislaw Gruszka authored
commit deee0214 upstream. We can not pass NULL libconf->conf->channel to rt61pci_config() as it is dereferenced unconditionally in rt61pci_config_lna_gain() subroutine. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=44361 Reported-and-tested-by: <dolohow@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Daniel Drake authored
commit 1f6fc43e upstream. libertas currently calls cfg80211_disconnected() when it is being brought down. This causes an event to be allocated, but since the wdev is already removed from the rdev by the time that the event processing work executes, the event is never processed or freed. http://article.gmane.org/gmane.linux.kernel.wireless.general/95666 Fix this leak, and other possible situations, by processing the event queue when a device is being unregistered. Thanks to Johannes Berg for the suggestion. Signed-off-by:
Daniel Drake <dsd@laptop.org> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Philipp A. Mohrenweiser authored
commit 4407be6b upstream. Add a model/fixup string "lenovo-dock", for Thinkpad T430s, to allow sound in docking station. Tested on Lenovo T430s with ThinkPad Mini Dock Plus Series 3 Signed-off-by:
Philipp A. Mohrenweiser <phiamo@googlemail.com> Signed-off-by:
-
Marek Vasut authored
commit 3bed491c upstream. The CONFIG_DEFAULT_MMAP_MIN_ADDR was set to 65536 in mxs_defconfig, this caused severe breakage of userland applications since the upper limit for ARM is 32768. By default CONFIG_DEFAULT_MMAP_MIN_ADDR is set to 4096 and can also be changed via /proc/sys/vm/mmap_min_addr if needed. Quoting Russell King [1]: "4096 is also fine for ARM too. There's not much point in having defconfigs change it - that would just be pure noise in the config files." the CONFIG_DEFAULT_MMAP_MIN_ADDR can be removed from the defconfig altogether. This problem was introduced by commit cde7c41f (ARM: configs: add defconfig for mach-mxs). [1] http://marc.info/?l=linux-arm-kernel&m=134401593807820&w=2Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
commit d4e5979c upstream. AR1111 is same as AR9485. The h/w difference between them is quite insignificant, Felix suggests only very few baseband features may not be available in AR1111. The h/w code for AR9485 is already present, so AR1111 should work fine with the addition of its PID/VID. Cc: Felix Bitterli <felixb@qca.qualcomm.com> Reported-by:
Tim Bentley <Tim.Bentley@Gmail.com> Signed-off-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Tested-by:
-
Johannes Berg authored
commit dd4c9260 upstream. The mesh path timer needs to be canceled when leaving the mesh as otherwise it could fire after the interface has been removed already. Signed-off-by:
-
Stefan Bader authored
Based on commit fee84b07 upstream. Intercept RDPMC and forward it to the PMU emulation code. Newer vmx support will only allow to load the kvm_intel module if RDPMC_EXITING is supported. Even without the actual support this part of the change is required on 3.2 hosts. BugLink: http://bugs.launchpad.net/bugs/1031090Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Avi Kivity <avi@redhat.com> Signed-off-by:
-
Daniel Vetter authored
commit 53d227f2 upstream. Currently we reserve seqnos only when we emit the request to the ring (by bumping dev_priv->next_seqno), but start using it much earlier for ring->oustanding_lazy_request. When 2 threads compete for the gpu and run on two different rings (e.g. ddx on blitter vs. compositor) hilarity ensued, especially when we get constantly interrupted while reserving buffers. Breakage seems to have been introduced in commit 6f392d54 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Sat Aug 7 11:01:22 2010 +0100 drm/i915: Use a common seqno for all rings. This patch fixes up the seqno reservation logic by moving it into i915_gem_next_request_seqno. The ring->add_request functions now superflously still return the new seqno through a pointer, that will be refactored in the next patch. Note that with this change we now unconditionally allocate a seqno, even when ->add_request might fail because the rings are full and the gpu died. But this does not open up a new can of worms because we can already leave behind an outstanding_request_seqno if e.g. the caller gets interrupted with a signal while stalling for the gpu in the eviciton paths. And with the bugfix we only ever have one seqno allocated per ring (and only that ring), so there are no ordering issues with multiple outstanding seqnos on the same ring. v2: Keep i915_gem_get_seqno (but move it to i915_gem.c) to make it clear that we only have one seqno counter for all rings. Suggested by Chris Wilson. v3: As suggested by Chris Wilson use i915_gem_next_request_seqno instead of ring->oustanding_lazy_request to make the follow-up refactoring more clearly correct. Also improve the commit message with issues discussed on irc. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45181 Tested-by: Nicolas Kalkhof nkalkhof()at()web.de Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by:
-
Janne Kalliomäki authored
commit a6dc8c04 upstream. The variable io_size was unsigned int, which caused the wrong sector number to be calculated after aligning it. This then caused mount to fail with big volumes, as backup volume header information was searched from a wrong sector. Signed-off-by:
Janne Kalliomäki <janne@tuxera.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Larry Finger authored
commit 3ce4d85b upstream. In commit a7959c13, the USB part of rtlwifi was switched to convert _usb_read_sync() to using a preallocated buffer rather than one that has been acquired using kmalloc. Although this routine is named as though it were synchronous, there seem to be simultaneous users, and the selection of the index to the data buffer is not multi-user safe. This situation is addressed by adding a new spinlock. The routine cannot sleep, thus a mutex is not allowed. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Dean Nelson authored
commit b868179c upstream. Commit d5bc77a2 broke Wake-on-LAN by inadvertently dropping the enabling of DMA receives. Restore the enabling of DMA receives for WoL. This is applicable to 3.1+ stable trees. Reported-by:
Tobias Klausmann <klausman@schwarzvogel.de> Signed-off-by:
Dean Nelson <dnelson@redhat.com> Tested-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Mathias Krause authored
[ Upstream commits a117dacd and 8bbb1813 ] The tun module leaks up to 36 bytes of memory by not fully initializing a structure located on the stack that gets copied to user memory by the TUNGETIFF and SIOCGIFHWADDR ioctl()s. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jiri Kosina authored
[ Upstream commit 59ea33a6 ] Back in 2006, commit 1a2449a8 ("[I/OAT]: TCP recv offload to I/OAT") added support for receive offloading to IOAT dma engine if available. The code in tcp_rcv_established() tries to perform early DMA copy if applicable. It however does so without checking whether the userspace task is actually expecting the data in the buffer. This is not a problem under normal circumstances, but there is a corner case where this doesn't work -- and that's when MSG_TRUNC flag to recvmsg() is used. If the IOAT dma engine is not used, the code properly checks whether there is a valid ucopy.task and the socket is owned by userspace, but misses the check in the dmaengine case. This problem can be observed in real trivially -- for example 'tbench' is a good reproducer, as it makes a heavy use of MSG_TRUNC. On systems utilizing IOAT, you will soon find tbench waiting indefinitely in sk_wait_data(), as they have been already early-copied in tcp_rcv_established() using dma engine. This patch introduces the same check we are performing in the simple iovec copy case to the IOAT case as well. It fixes the indefinite recvmsg(MSG_TRUNC) hangs. Signed-off-by:
-
Jiri Benc authored
[ Upstream commit b1beb681 ] When device flags are set using rtnetlink, IFF_PROMISC and IFF_ALLMULTI flags are handled specially. Function dev_change_flags sets IFF_PROMISC and IFF_ALLMULTI bits in dev->gflags according to the passed value but do_setlink passes a result of rtnl_dev_combine_flags which takes those bits from dev->flags. This can be easily trigerred by doing: tcpdump -i eth0 & ip l s up eth0 ip sets IFF_UP flag in ifi_flags and ifi_change, which is combined with IFF_PROMISC by rtnl_dev_combine_flags, causing __dev_change_flags to set IFF_PROMISC in gflags. Reported-by:
Max Matveev <makc@redhat.com> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit e4c7f259 ] The problem is that we call this with a spin lock held. The call tree is: kaweth_start_xmit() holds kaweth->device_lock. -> kaweth_async_set_rx_mode() -> kaweth_control() -> kaweth_internal_control_msg() The kaweth_internal_control_msg() function is only called from kaweth_control() which used GFP_ATOMIC for its allocations. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 42493570 ] TCP_USER_TIMEOUT is a TCP level socket option that takes an unsigned int. But patch "tcp: Add TCP_USER_TIMEOUT socket option"(dca43c75) didn't check the negative values. If a user assign -1 to it, the socket will set successfully and wait for 4294967295 miliseconds. This patch add a negative value check to avoid this issue. Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Alan Cox authored
[ Upstream commit 8b72ff64 ] gcc really should warn about these ! Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Alan Cox authored
[ Upstream commit c66b9b7d ] Reported-by: <rucsoftsec@gmail.com> Resolves-bug: http://bugzilla.kernel.org/show_bug?44441Signed-off-by:
-
Paul Moore authored
[ Upstream commit 89d7ae34 ] As reported by Alan Cox, and verified by Lin Ming, when a user attempts to add a CIPSO option to a socket using the CIPSO_V4_TAG_LOCAL tag the kernel dies a terrible death when it attempts to follow a NULL pointer (the skb argument to cipso_v4_validate() is NULL when called via the setsockopt() syscall). This patch fixes this by first checking to ensure that the skb is non-NULL before using it to find the incoming network interface. In the unlikely case where the skb is NULL and the user attempts to add a CIPSO option with the _TAG_LOCAL tag we return an error as this is not something we want to allow. A simple reproducer, kindly supplied by Lin Ming, although you must have the CIPSO DOI #3 configure on the system first or you will be caught early in cipso_v4_validate(): #include <sys/types.h> #include <sys/socket.h> #include <linux/ip.h> #include <linux/in.h> #include <string.h> struct local_tag { char type; char length; char info[4]; }; struct cipso { char type; char length; char doi[4]; struct local_tag local; }; int main(int argc, char **argv) { int sockfd; struct cipso cipso = { .type = IPOPT_CIPSO, .length = sizeof(struct cipso), .local = { .type = 128, .length = sizeof(struct local_tag), }, }; memset(cipso.doi, 0, 4); cipso.doi[3] = 3; sockfd = socket(AF_INET, SOCK_DGRAM, 0); #define SOL_IP 0 setsockopt(sockfd, SOL_IP, IP_OPTIONS, &cipso, sizeof(struct cipso)); return 0; } CC: Lin Ming <mlin@ss.pku.edu.cn> Reported-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Sjur Brændeland authored
[ Upstream commit 96f80d12 ] unregister_netdevice_notifier() must be called before unregister_pernet_subsys() to avoid accessing already freed pernet memory. This fixes the following oops when doing rmmod: Call Trace: [<ffffffffa0f802bd>] caif_device_notify+0x4d/0x5a0 [caif] [<ffffffff81552ba9>] unregister_netdevice_notifier+0xb9/0x100 [<ffffffffa0f86dcc>] caif_device_exit+0x1c/0x250 [caif] [<ffffffff810e7734>] sys_delete_module+0x1a4/0x300 [<ffffffff810da82d>] ? trace_hardirqs_on_caller+0x15d/0x1e0 [<ffffffff813517de>] ? trace_hardirqs_on_thunk+0x3a/0x3 [<ffffffff81696bad>] system_call_fastpath+0x1a/0x1f RIP [<ffffffffa0f7f561>] caif_get+0x51/0xb0 [caif] Signed-off-by:
Sjur Brændeland <sjur.brandeland@stericsson.com> Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Neil Horman authored
[ Upstream commit 2eebc1e1 ] A few days ago Dave Jones reported this oops: [22766.294255] general protection fault: 0000 [#1] PREEMPT SMP [22766.295376] CPU 0 [22766.295384] Modules linked in: [22766.387137] ffffffffa169f292 6b6b6b6b6b6b6b6b ffff880147c03a90 ffff880147c03a74 [22766.387135] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 00000000000 [22766.387136] Process trinity-watchdo (pid: 10896, threadinfo ffff88013e7d2000, [22766.387137] Stack: [22766.387140] ffff880147c03a10 [22766.387140] ffffffffa169f2b6 [22766.387140] ffff88013ed95728 [22766.387143] 0000000000000002 [22766.387143] 0000000000000000 [22766.387143] ffff880003fad062 [22766.387144] ffff88013c120000 [22766.387144] [22766.387145] Call Trace: [22766.387145] <IRQ> [22766.387150] [<ffffffffa169f292>] ? __sctp_lookup_association+0x62/0xd0 [sctp] [22766.387154] [<ffffffffa169f2b6>] __sctp_lookup_association+0x86/0xd0 [sctp] [22766.387157] [<ffffffffa169f597>] sctp_rcv+0x207/0xbb0 [sctp] [22766.387161] [<ffffffff810d4da8>] ? trace_hardirqs_off_caller+0x28/0xd0 [22766.387163] [<ffffffff815827e3>] ? nf_hook_slow+0x133/0x210 [22766.387166] [<ffffffff815902fc>] ? ip_local_deliver_finish+0x4c/0x4c0 [22766.387168] [<ffffffff8159043d>] ip_local_deliver_finish+0x18d/0x4c0 [22766.387169] [<ffffffff815902fc>] ? ip_local_deliver_finish+0x4c/0x4c0 [22766.387171] [<ffffffff81590a07>] ip_local_deliver+0x47/0x80 [22766.387172] [<ffffffff8158fd80>] ip_rcv_finish+0x150/0x680 [22766.387174] [<ffffffff81590c54>] ip_rcv+0x214/0x320 [22766.387176] [<ffffffff81558c07>] __netif_receive_skb+0x7b7/0x910 [22766.387178] [<ffffffff8155856c>] ? __netif_receive_skb+0x11c/0x910 [22766.387180] [<ffffffff810d423e>] ? put_lock_stats.isra.25+0xe/0x40 [22766.387182] [<ffffffff81558f83>] netif_receive_skb+0x23/0x1f0 [22766.387183] [<ffffffff815596a9>] ? dev_gro_receive+0x139/0x440 [22766.387185] [<ffffffff81559280>] napi_skb_finish+0x70/0xa0 [22766.387187] [<ffffffff81559cb5>] napi_gro_receive+0xf5/0x130 [22766.387218] [<ffffffffa01c4679>] e1000_receive_skb+0x59/0x70 [e1000e] [22766.387242] [<ffffffffa01c5aab>] e1000_clean_rx_irq+0x28b/0x460 [e1000e] [22766.387266] [<ffffffffa01c9c18>] e1000e_poll+0x78/0x430 [e1000e] [22766.387268] [<ffffffff81559fea>] net_rx_action+0x1aa/0x3d0 [22766.387270] [<ffffffff810a495f>] ? account_system_vtime+0x10f/0x130 [22766.387273] [<ffffffff810734d0>] __do_softirq+0xe0/0x420 [22766.387275] [<ffffffff8169826c>] call_softirq+0x1c/0x30 [22766.387278] [<ffffffff8101db15>] do_softirq+0xd5/0x110 [22766.387279] [<ffffffff81073bc5>] irq_exit+0xd5/0xe0 [22766.387281] [<ffffffff81698b03>] do_IRQ+0x63/0xd0 [22766.387283] [<ffffffff8168ee2f>] common_interrupt+0x6f/0x6f [22766.387283] <EOI> [22766.387284] [22766.387285] [<ffffffff8168eed9>] ? retint_swapgs+0x13/0x1b [22766.387285] Code: c0 90 5d c3 66 0f 1f 44 00 00 4c 89 c8 5d c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 5d e8 4c 89 65 f0 4c 89 6d f8 66 66 66 66 90 <0f> b7 87 98 00 00 00 48 89 fb 49 89 f5 66 c1 c0 08 66 39 46 02 [22766.387307] [22766.387307] RIP [22766.387311] [<ffffffffa168a2c9>] sctp_assoc_is_match+0x19/0x90 [sctp] [22766.387311] RSP <ffff880147c039b0> [22766.387142] ffffffffa16ab120 [22766.599537] ---[ end trace 3f6dae82e37b17f5 ]--- [22766.601221] Kernel panic - not syncing: Fatal exception in interrupt It appears from his analysis and some staring at the code that this is likely occuring because an association is getting freed while still on the sctp_assoc_hashtable. As a result, we get a gpf when traversing the hashtable while a freed node corrupts part of the list. Nominally I would think that an mibalanced refcount was responsible for this, but I can't seem to find any obvious imbalance. What I did note however was that the two places where we create an association using sctp_primitive_ASSOCIATE (__sctp_connect and sctp_sendmsg), have failure paths which free a newly created association after calling sctp_primitive_ASSOCIATE. sctp_primitive_ASSOCIATE brings us into the sctp_sf_do_prm_asoc path, which issues a SCTP_CMD_NEW_ASOC side effect, which in turn adds a new association to the aforementioned hash table. the sctp command interpreter that process side effects has not way to unwind previously processed commands, so freeing the association from the __sctp_connect or sctp_sendmsg error path would lead to a freed association remaining on this hash table. I've fixed this but modifying sctp_[un]hash_established to use hlist_del_init, which allows us to proerly use hlist_unhashed to check if the node is on a hashlist safely during a delete. That in turn alows us to safely call sctp_unhash_established in the __sctp_connect and sctp_sendmsg error paths before freeing them, regardles of what the associations state is on the hash list. I noted, while I was doing this, that the __sctp_unhash_endpoint was using hlist_unhsashed in a simmilar fashion, but never nullified any removed nodes pointers to make that function work properly, so I fixed that up in a simmilar fashion. I attempted to test this using a virtual guest running the SCTP_RR test from netperf in a loop while running the trinity fuzzer, both in a loop. I wasn't able to recreate the problem prior to this fix, nor was I able to trigger the failure after (neither of which I suppose is suprising). Given the trace above however, I think its likely that this is what we hit. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by: davej@redhat.com CC: davej@redhat.com CC: "David S. Miller" <davem@davemloft.net> CC: Vlad Yasevich <vyasevich@gmail.com> CC: Sridhar Samudrala <sri@us.ibm.com> CC: linux-sctp@vger.kernel.org Signed-off-by:
-
Alan Cox authored
[ Upstream commit 7ac2908e ] Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=44461Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit c1f5163d ] In rare cases, bnx2x_free_tx_skbs() can unmap the wrong DMA address when it gets to the last entry of the tx ring. We were not using the proper macro to skip the last entry when advancing the tx index. Reported-by:
Zongyun Lai <zlai@vmware.com> Reviewed-by:
Jeffrey Huang <huangjw@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
