1. 29 May, 2012 14 commits
    • Mel Gorman's avatar
      mm: vmscan: remove lumpy reclaim · c53919ad
      Mel Gorman authored
      This series removes lumpy reclaim and some stalling logic that was
      unintentionally being used by memory compaction.  The end result is that
      stalling on dirty pages during page reclaim now depends on
      wait_iff_congested().
      
      Four kernels were compared
      
        3.3.0     vanilla
        3.4.0-rc2 vanilla
        3.4.0-rc2 lumpyremove-v2 is patch one from this series
        3.4.0-rc2 nosync-v2r3 is the full series
      
      Removing lumpy reclaim saves almost 900 bytes of text whereas the full
      series removes 1200 bytes.
      
           text     data      bss       dec     hex  filename
        67403754  1927944  2260992  10929311  a6c49f  vmlinux-3.4.0-rc2-vanilla
        6739479  1927944  2260992  10928415  a6c11f  vmlinux-3.4.0-rc2-lumpyremove-v2
        6739159  1927944  2260992  10928095  a6bfdf  vmlinux-3.4.0-rc2-nosync-v2
      
      There are behaviour changes in the series and so tests were run with
      monitoring of ftrace events.  This disrupts results so the performance
      results are distorted but the new behaviour should be clearer.
      
      fs-mark running in a threaded configuration showed little of interest as
      it did not push reclaim aggressively
      
        FS-Mark Multi Threaded
                                3.3.0-vanilla       rc2-vanilla       lumpyremove-v2r3       nosync-v2r3
        Files/s  min           3.20 ( 0.00%)        3.20 ( 0.00%)        3.20 ( 0.00%)        3.20 ( 0.00%)
        Files/s  mean          3.20 ( 0.00%)        3.20 ( 0.00%)        3.20 ( 0.00%)        3.20 ( 0.00%)
        Files/s  stddev        0.00 ( 0.00%)        0.00 ( 0.00%)        0.00 ( 0.00%)        0.00 ( 0.00%)
        Files/s  max           3.20 ( 0.00%)        3.20 ( 0.00%)        3.20 ( 0.00%)        3.20 ( 0.00%)
        Overhead min      508667.00 ( 0.00%)   521350.00 (-2.49%)   544292.00 (-7.00%)   547168.00 (-7.57%)
        Overhead mean     551185.00 ( 0.00%)   652690.73 (-18.42%)   991208.40 (-79.83%)   570130.53 (-3.44%)
        Overhead stddev    18200.69 ( 0.00%)   331958.29 (-1723.88%)  1579579.43 (-8578.68%)     9576.81 (47.38%)
        Overhead max      576775.00 ( 0.00%)  1846634.00 (-220.17%)  6901055.00 (-1096.49%)   585675.00 (-1.54%)
        MMTests Statistics: duration
        Sys Time Running Test (seconds)             309.90    300.95    307.33    298.95
        User+Sys Time Running Test (seconds)        319.32    309.67    315.69    307.51
        Total Elapsed Time (seconds)               1187.85   1193.09   1191.98   1193.73
      
        MMTests Statistics: vmstat
        Page Ins                                       80532       82212       81420       79480
        Page Outs                                  111434984   111456240   111437376   111582628
        Swap Ins                                           0           0           0           0
        Swap Outs                                          0           0           0           0
        Direct pages scanned                           44881       27889       27453       34843
        Kswapd pages scanned                        25841428    25860774    25861233    25843212
        Kswapd pages reclaimed                      25841393    25860741    25861199    25843179
        Direct pages reclaimed                         44881       27889       27453       34843
        Kswapd efficiency                                99%         99%         99%         99%
        Kswapd velocity                            21754.791   21675.460   21696.029   21649.127
        Direct efficiency                               100%        100%        100%        100%
        Direct velocity                               37.783      23.375      23.031      29.188
        Percentage direct scans                           0%          0%          0%          0%
      
      ftrace showed that there was no stalling on writeback or pages submitted
      for IO from reclaim context.
      
      postmark was similar and while it was more interesting, it also did not
      push reclaim heavily.
      
        POSTMARK
                                             3.3.0-vanilla       rc2-vanilla  lumpyremove-v2r3       nosync-v2r3
        Transactions per second:               16.00 ( 0.00%)    20.00 (25.00%)    18.00 (12.50%)    17.00 ( 6.25%)
        Data megabytes read per second:        18.80 ( 0.00%)    24.27 (29.10%)    22.26 (18.40%)    20.54 ( 9.26%)
        Data megabytes written per second:     35.83 ( 0.00%)    46.25 (29.08%)    42.42 (18.39%)    39.14 ( 9.24%)
        Files created alone per second:        28.00 ( 0.00%)    38.00 (35.71%)    34.00 (21.43%)    30.00 ( 7.14%)
        Files create/transact per second:       8.00 ( 0.00%)    10.00 (25.00%)     9.00 (12.50%)     8.00 ( 0.00%)
        Files deleted alone per second:       556.00 ( 0.00%)  1224.00 (120.14%)  3062.00 (450.72%)  6124.00 (1001.44%)
        Files delete/transact per second:       8.00 ( 0.00%)    10.00 (25.00%)     9.00 (12.50%)     8.00 ( 0.00%)
      
        MMTests Statistics: duration
        Sys Time Running Test (seconds)             113.34    107.99    109.73    108.72
        User+Sys Time Running Test (seconds)        145.51    139.81    143.32    143.55
        Total Elapsed Time (seconds)               1159.16    899.23    980.17   1062.27
      
        MMTests Statistics: vmstat
        Page Ins                                    13710192    13729032    13727944    13760136
        Page Outs                                   43071140    42987228    42733684    42931624
        Swap Ins                                           0           0           0           0
        Swap Outs                                          0           0           0           0
        Direct pages scanned                               0           0           0           0
        Kswapd pages scanned                         9941613     9937443     9939085     9929154
        Kswapd pages reclaimed                       9940926     9936751     9938397     9928465
        Direct pages reclaimed                             0           0           0           0
        Kswapd efficiency                                99%         99%         99%         99%
        Kswapd velocity                             8576.567   11051.058   10140.164    9347.109
        Direct efficiency                               100%        100%        100%        100%
        Direct velocity                                0.000       0.000       0.000       0.000
      
      It looks like here that the full series regresses performance but as
      ftrace showed no usage of wait_iff_congested() or sync reclaim I am
      assuming it's a disruption due to monitoring.  Other data such as memory
      usage, page IO, swap IO all looked similar.
      
      Running a benchmark with a plain DD showed nothing very interesting.
      The full series stalled in wait_iff_congested() slightly less but stall
      times on vanilla kernels were marginal.
      
      Running a benchmark that hammered on file-backed mappings showed stalls
      due to congestion but not in sync writebacks
      
        MICRO
                                             3.3.0-vanilla       rc2-vanilla  lumpyremove-v2r3       nosync-v2r3
        MMTests Statistics: duration
        Sys Time Running Test (seconds)             308.13    294.50    298.75    299.53
        User+Sys Time Running Test (seconds)        330.45    316.28    318.93    320.79
        Total Elapsed Time (seconds)               1814.90   1833.88   1821.14   1832.91
      
        MMTests Statistics: vmstat
        Page Ins                                      108712      120708       97224      110344
        Page Outs                                  155514576   156017404   155813676   156193256
        Swap Ins                                           0           0           0           0
        Swap Outs                                          0           0           0           0
        Direct pages scanned                         2599253     1550480     2512822     2414760
        Kswapd pages scanned                        69742364    71150694    68839041    69692533
        Kswapd pages reclaimed                      34824488    34773341    34796602    34799396
        Direct pages reclaimed                         53693       94750       61792       75205
        Kswapd efficiency                                49%         48%         50%         49%
        Kswapd velocity                            38427.662   38797.901   37799.972   38022.889
        Direct efficiency                                 2%          6%          2%          3%
        Direct velocity                             1432.174     845.464    1379.807    1317.446
        Percentage direct scans                           3%          2%          3%          3%
        Page writes by reclaim                             0           0           0           0
        Page writes file                                   0           0           0           0
        Page writes anon                                   0           0           0           0
        Page reclaim immediate                             0           0           0        1218
        Page rescued immediate                             0           0           0           0
        Slabs scanned                                  15360       16384       13312       16384
        Direct inode steals                                0           0           0           0
        Kswapd inode steals                             4340        4327        1630        4323
      
        FTrace Reclaim Statistics: congestion_wait
        Direct number congest     waited                 0          0          0          0
        Direct time   congest     waited               0ms        0ms        0ms        0ms
        Direct full   congest     waited                 0          0          0          0
        Direct number conditional waited               900        870        754        789
        Direct time   conditional waited               0ms        0ms        0ms       20ms
        Direct full   conditional waited                 0          0          0          0
        KSwapd number congest     waited              2106       2308       2116       1915
        KSwapd time   congest     waited          139924ms   157832ms   125652ms   132516ms
        KSwapd full   congest     waited              1346       1530       1202       1278
        KSwapd number conditional waited             12922      16320      10943      14670
        KSwapd time   conditional waited               0ms        0ms        0ms        0ms
        KSwapd full   conditional waited                 0          0          0          0
      
      Reclaim statistics are not radically changed.  The stall times in kswapd
      are massive but it is clear that it is due to calls to congestion_wait()
      and that is almost certainly the call in balance_pgdat().  Otherwise
      stalls due to dirty pages are non-existant.
      
      I ran a benchmark that stressed high-order allocation.  This is very
      artifical load but was used in the past to evaluate lumpy reclaim and
      compaction.  Generally I look at allocation success rates and latency
      figures.
      
        STRESS-HIGHALLOC
                         3.3.0-vanilla       rc2-vanilla  lumpyremove-v2r3       nosync-v2r3
        Pass 1          81.00 ( 0.00%)    28.00 (-53.00%)    24.00 (-57.00%)    28.00 (-53.00%)
        Pass 2          82.00 ( 0.00%)    39.00 (-43.00%)    38.00 (-44.00%)    43.00 (-39.00%)
        while Rested    88.00 ( 0.00%)    87.00 (-1.00%)    88.00 ( 0.00%)    88.00 ( 0.00%)
      
        MMTests Statistics: duration
        Sys Time Running Test (seconds)             740.93    681.42    685.14    684.87
        User+Sys Time Running Test (seconds)       2922.65   3269.52   3281.35   3279.44
        Total Elapsed Time (seconds)               1161.73   1152.49   1159.55   1161.44
      
        MMTests Statistics: vmstat
        Page Ins                                     4486020     2807256     2855944     2876244
        Page Outs                                    7261600     7973688     7975320     7986120
        Swap Ins                                       31694           0           0           0
        Swap Outs                                      98179           0           0           0
        Direct pages scanned                           53494       57731       34406      113015
        Kswapd pages scanned                         6271173     1287481     1278174     1219095
        Kswapd pages reclaimed                       2029240     1281025     1260708     1201583
        Direct pages reclaimed                          1468       14564       16649       92456
        Kswapd efficiency                                32%         99%         98%         98%
        Kswapd velocity                             5398.133    1117.130    1102.302    1049.641
        Direct efficiency                                 2%         25%         48%         81%
        Direct velocity                               46.047      50.092      29.672      97.306
        Percentage direct scans                           0%          4%          2%          8%
        Page writes by reclaim                       1616049           0           0           0
        Page writes file                             1517870           0           0           0
        Page writes anon                               98179           0           0           0
        Page reclaim immediate                        103778       27339        9796       17831
        Page rescued immediate                             0           0           0           0
        Slabs scanned                                1096704      986112      980992      998400
        Direct inode steals                              223      215040      216736      247881
        Kswapd inode steals                           175331       61548       68444       63066
        Kswapd skipped wait                            21991           0           1           0
        THP fault alloc                                    1         135         125         134
        THP collapse alloc                               393         311         228         236
        THP splits                                        25          13           7           8
        THP fault fallback                                 0           0           0           0
        THP collapse fail                                  3           5           7           7
        Compaction stalls                                865        1270        1422        1518
        Compaction success                               370         401         353         383
        Compaction failures                              495         869        1069        1135
        Compaction pages moved                        870155     3828868     4036106     4423626
        Compaction move failure                        26429       23865       29742       27514
      
      Success rates are completely hosed for 3.4-rc2 which is almost certainly
      due to commit fe2c2a10 ("vmscan: reclaim at order 0 when compaction
      is enabled").  I expected this would happen for kswapd and impair
      allocation success rates (https://lkml.org/lkml/2012/1/25/166) but I did
      not anticipate this much a difference: 80% less scanning, 37% less
      reclaim by kswapd
      
      In comparison, reclaim/compaction is not aggressive and gives up easily
      which is the intended behaviour.  hugetlbfs uses __GFP_REPEAT and would
      be much more aggressive about reclaim/compaction than THP allocations
      are.  The stress test above is allocating like neither THP or hugetlbfs
      but is much closer to THP.
      
      Mainline is now impaired in terms of high order allocation under heavy
      load although I do not know to what degree as I did not test with
      __GFP_REPEAT.  Keep this in mind for bugs related to hugepage pool
      resizing, THP allocation and high order atomic allocation failures from
      network devices.
      
      In terms of congestion throttling, I see the following for this test
      
        FTrace Reclaim Statistics: congestion_wait
        Direct number congest     waited                 3          0          0          0
        Direct time   congest     waited               0ms        0ms        0ms        0ms
        Direct full   congest     waited                 0          0          0          0
        Direct number conditional waited               957        512       1081       1075
        Direct time   conditional waited               0ms        0ms        0ms        0ms
        Direct full   conditional waited                 0          0          0          0
        KSwapd number congest     waited                36          4          3          5
        KSwapd time   congest     waited            3148ms      400ms      300ms      500ms
        KSwapd full   congest     waited                30          4          3          5
        KSwapd number conditional waited             88514        197        332        542
        KSwapd time   conditional waited            4980ms        0ms        0ms        0ms
        KSwapd full   conditional waited                49          0          0          0
      
      The "conditional waited" times are the most interesting as this is
      directly impacted by the number of dirty pages encountered during scan.
      As lumpy reclaim is no longer scanning contiguous ranges, it is finding
      fewer dirty pages.  This brings wait times from about 5 seconds to 0.
      kswapd itself is still calling congestion_wait() so it'll still stall but
      it's a lot less.
      
      In terms of the type of IO we were doing, I see this
      
        FTrace Reclaim Statistics: mm_vmscan_writepage
        Direct writes anon  sync                         0          0          0          0
        Direct writes anon  async                        0          0          0          0
        Direct writes file  sync                         0          0          0          0
        Direct writes file  async                        0          0          0          0
        Direct writes mixed sync                         0          0          0          0
        Direct writes mixed async                        0          0          0          0
        KSwapd writes anon  sync                         0          0          0          0
        KSwapd writes anon  async                    91682          0          0          0
        KSwapd writes file  sync                         0          0          0          0
        KSwapd writes file  async                   822629          0          0          0
        KSwapd writes mixed sync                         0          0          0          0
        KSwapd writes mixed async                        0          0          0          0
      
      In 3.2, kswapd was doing a bunch of async writes of pages but
      reclaim/compaction was never reaching a point where it was doing sync
      IO.  This does not guarantee that reclaim/compaction was not calling
      wait_on_page_writeback() but I would consider it unlikely.  It indicates
      that merging patches 2 and 3 to stop reclaim/compaction calling
      wait_on_page_writeback() should be safe.
      
      This patch:
      
      Lumpy reclaim had a purpose but in the mind of some, it was to kick the
      system so hard it trashed.  For others the purpose was to complicate
      vmscan.c.  Over time it was giving softer shoes and a nicer attitude but
      memory compaction needs to step up and replace it so this patch sends
      lumpy reclaim to the farm.
      
      The tracepoint format changes for isolating LRU pages with this patch
      applied.  Furthermore reclaim/compaction can no longer queue dirty pages
      in pageout() if the underlying BDI is congested.  Lumpy reclaim used
      this logic and reclaim/compaction was using it in error.
      Signed-off-by: default avatarMel Gorman <mgorman@suse.de>
      Acked-by: default avatarRik van Riel <riel@redhat.com>
      Acked-by: default avatarKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: Ying Han <yinghan@google.com>
      Cc: Andy Whitcroft <apw@shadowen.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      c53919ad
    • Rik van Riel's avatar
      mm: remove swap token code · e709ffd6
      Rik van Riel authored
      The swap token code no longer fits in with the current VM model.  It
      does not play well with cgroups or the better NUMA placement code in
      development, since we have only one swap token globally.
      
      It also has the potential to mess with scalability of the system, by
      increasing the number of non-reclaimable pages on the active and
      inactive anon LRU lists.
      
      Last but not least, the swap token code has been broken for a year
      without complaints, as reported by Konstantin Khlebnikov.  This suggests
      we no longer have much use for it.
      
      The days of sub-1G memory systems with heavy use of swap are over.  If
      we ever need thrashing reducing code in the future, we will have to
      implement something that does scale.
      Signed-off-by: default avatarRik van Riel <riel@redhat.com>
      Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
      Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: Hugh Dickins <hughd@google.com>
      Acked-by: default avatarBob Picco <bpicco@meloft.net>
      Acked-by: default avatarKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e709ffd6
    • David Rientjes's avatar
      mm, thp: allow fallback when pte_alloc_one() fails for huge pmd · edad9d2c
      David Rientjes authored
      The transparent hugepages feature is careful to not invoke the oom
      killer when a hugepage cannot be allocated.
      
      pte_alloc_one() failing in __do_huge_pmd_anonymous_page(), however,
      currently results in VM_FAULT_OOM which invokes the pagefault oom killer
      to kill a memory-hogging task.
      
      This is unnecessary since it's possible to drop the reference to the
      hugepage and fallback to allocating a small page.
      Signed-off-by: default avatarDavid Rientjes <rientjes@google.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      edad9d2c
    • David Rientjes's avatar
      mm, thp: remove unnecessary ret variable · aa2e878e
      David Rientjes authored
      The "ret" variable is unnecessary in __do_huge_pmd_anonymous_page(), so
      remove it.
      Signed-off-by: default avatarDavid Rientjes <rientjes@google.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      aa2e878e
    • Wang Sheng-Hui's avatar
      mm/hugetlb.c: use long vars instead of int in region_count() · f2135a4a
      Wang Sheng-Hui authored
      The arguments f & t and fields from & to of struct file_region are
      defined as long.  So use long instead of int to type the temp vars.
      Signed-off-by: default avatarWang Sheng-Hui <shhuiw@gmail.com>
      Acked-by: default avatarDavid Rientjes <rientjes@google.com>
      Acked-by: default avatarHillf Danton <dhillf@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f2135a4a
    • Wang Sheng-Hui's avatar
      mm/mempolicy.c: use enum value MPOL_REBIND_ONCE in mpol_rebind_policy() · 89c522c7
      Wang Sheng-Hui authored
      We have enum definition in mempolicy.h: MPOL_REBIND_ONCE.  It should
      replace the magic number 0 for step comparison in function
      mpol_rebind_policy.
      Signed-off-by: default avatarWang Sheng-Hui <shhuiw@gmail.com>
      Acked-by: default avatarDavid Rientjes <rientjes@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      89c522c7
    • Borislav Petkov's avatar
      mm/memory_failure: let the compiler add the function name · 71dd0b8a
      Borislav Petkov authored
      These things tend to get out of sync with time so let the compiler
      automatically enter the current function name using __func__.
      
      No functional change.
      Signed-off-by: default avatarBorislav Petkov <borislav.petkov@amd.com>
      Acked-by: default avatarAndi Kleen <andi@firstfloor.org>
      Cc: David Rientjes <rientjes@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      71dd0b8a
    • Sasha Levin's avatar
      mm: fix NULL ptr deref when walking hugepages · 08fa29d9
      Sasha Levin authored
      A missing validation of the value returned by find_vma() could cause a
      NULL ptr dereference when walking the pagetable.
      
      This is triggerable from usermode by a simple user by trying to read a
      page info out of /proc/pid/pagemap which doesn't exist.
      
      Introduced by commit 025c5b24 ("thp: optimize away unnecessary page
      table locking").
      Signed-off-by: default avatarSasha Levin <levinsasha928@gmail.com>
      Reviewed-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: <stable@vger.kernel.org>		[3.4.x]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      08fa29d9
    • Cong Wang's avatar
      cris: select GENERIC_ATOMIC64 · 4c9c6a1b
      Cong Wang authored
      Cris doesn't implement atomic64 operations neither, should select
      GENERIC_ATOMIC64.
      Signed-off-by: default avatarWANG Cong <xiyou.wangcong@gmail.com>
      Cc: Mikael Starvik <starvik@axis.com>
      Cc: Jesper Nilsson <jesper.nilsson@axis.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      4c9c6a1b
    • Paul Gortmaker's avatar
      pagemap.h: fix warning about possibly used before init var · af2e8409
      Paul Gortmaker authored
      Commit f56f821f ("mm: extend prefault helpers to fault in more than
      PAGE_SIZE") added in the new functions: fault_in_multipages_writeable()
      and fault_in_multipages_readable().
      
      However, we currently see:
      
        include/linux/pagemap.h:492: warning: 'ret' may be used uninitialized in this function
        include/linux/pagemap.h:492: note: 'ret' was declared here
      
      Unlike a lot of gcc nags, this one appears somewhat legit.  i.e.  passing
      in an invalid negative value of "size" does make it look like all the
      conditionals in there would be bypassed and the uninitialized value would
      be returned.
      Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
      Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      af2e8409
    • Linus Torvalds's avatar
      Merge tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 · 4b781474
      Linus Torvalds authored
      Pull MFD changes from Samuel Ortiz:
       "Besides the usual cleanups, this one brings:
      
         * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton,
           ST-E's STAX211, Samsung's MAX77693 and TI's LM3533.
      
         * Device tree support for the twl6040, tps65910, da9502 and ab8500
           drivers.
      
         * Fairly big tps56910, ab8500 and db8500 updates.
      
         * i2c support for mc13xxx.
      
         * Our regular update for the wm8xxx driver from Mark."
      
      Fix up various conflicts with other trees, largely due to ab5500 removal
      etc.
      
      * tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits)
        mfd: Fix build break of max77693 by adding REGMAP_I2C option
        mfd: Fix twl6040 build failure
        mfd: Fix max77693 build failure
        mfd: ab8500-core should depend on MFD_DB8500_PRCMU
        gpio: tps65910: dt: process gpio specific device node info
        mfd: Remove the parsing of dt info for tps65910 gpio
        mfd: Save device node parsed platform data for tps65910 sub devices
        mfd: Add r_select to lm3533 platform data
        gpio: Add Intel Centerton support to gpio-sch
        mfd: Emulate active low IRQs as well as active high IRQs for wm831x
        mfd: Mark two lm3533 zone registers as volatile
        mfd: Fix return type of lm533 attribute is_visible
        mfd: Enable Device Tree support in the ab8500-pwm driver
        mfd: Enable Device Tree support in the ab8500-sysctrl driver
        mfd: Add support for Device Tree to twl6040
        mfd: Register the twl6040 child for the ASoC codec unconditionally
        mfd: Allocate twl6040 IRQ numbers dynamically
        mfd: twl6040 code cleanup in interrupt initialization part
        mfd: Enable ab8500-gpadc driver for Device Tree
        mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver
        ...
      4b781474
    • Linus Torvalds's avatar
      Merge tag 'nfs-for-3.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs · 53f2c4a8
      Linus Torvalds authored
      Pull NFS client updates from Trond Myklebust:
       "New features include:
         - Rewrite the O_DIRECT code so that it can share the same coalescing
           and pNFS functionality as the page cache code.
         - Allow the server to provide hints as to when we should use pNFS,
           and when it is more efficient to read and write through the
           metadata server.
         - NFS cache consistency updates:
           * Use the ctime to emulate a change attribute for NFSv2/v3 so that
             all NFS versions can share the same cache management code.
           * New cache management code will only look at the change attribute
             and size attribute when deciding whether or not our cached data
             is still valid or not.
           * Don't request NFSv4 post-op attributes on writes in cases such as
             O_DIRECT, where we don't care about data cache consistency, or
             when we have a write delegation, and know that our cache is still
             consistent.
           * Don't request NFSv4 post-op attributes on operations such as
             COMMIT, where there are no expected metadata updates.
           * Don't request NFSv4 directory post-op attributes in cases where
             the operations themselves already return change attribute
             updates: i.e. operations such as OPEN, CREATE, REMOVE, LINK and
             RENAME.
         - Speed up 'ls' and friends by using READDIR rather than READDIRPLUS
           if we detect no attempts to lookup filenames.
         - Improve the code sharing between NFSv2/v3 and v4 mounts
         - NFSv4.1 state management efficiency improvements
         - More patches in preparation for NFSv4/v4.1 migration functionality."
      
      Fix trivial conflict in fs/nfs/nfs4proc.c that was due to the dcache
      qstr name initialization changes (that made the length/hash a 64-bit
      union)
      
      * tag 'nfs-for-3.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (146 commits)
        NFSv4: Add debugging printks to state manager
        NFSv4: Map NFS4ERR_SHARE_DENIED into an EACCES error instead of EIO
        NFSv4: update_changeattr does not need to set NFS_INO_REVAL_PAGECACHE
        NFSv4.1: nfs4_reset_session should use nfs4_handle_reclaim_lease_error
        NFSv4.1: Handle other occurrences of NFS4ERR_CONN_NOT_BOUND_TO_SESSION
        NFSv4.1: Handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION in the state manager
        NFSv4.1: Handle errors in nfs4_bind_conn_to_session
        NFSv4.1: nfs4_bind_conn_to_session should drain the session
        NFSv4.1: Don't clobber the seqid if exchange_id returns a confirmed clientid
        NFSv4.1: Add DESTROY_CLIENTID
        NFSv4.1: Ensure we use the correct credentials for bind_conn_to_session
        NFSv4.1: Ensure we use the correct credentials for session create/destroy
        NFSv4.1: Move NFSPROC4_CLNT_BIND_CONN_TO_SESSION to the end of the operations
        NFSv4.1: Handle NFS4ERR_SEQ_MISORDERED when confirming the lease
        NFSv4: When purging the lease, we must clear NFS4CLNT_LEASE_CONFIRM
        NFSv4: Clean up the error handling for nfs4_reclaim_lease
        NFSv4.1: Exchange ID must use GFP_NOFS allocation mode
        nfs41: Use BIND_CONN_TO_SESSION for CB_PATH_DOWN*
        nfs4.1: add BIND_CONN_TO_SESSION operation
        NFSv4.1 test the mdsthreshold hint parameters
        ...
      53f2c4a8
    • Alan Cox's avatar
      tty: fix ldisc lock inversion trace · 8f6576ad
      Alan Cox authored
      This is caused by tty_release using tty_lock_pair to lock both sides of
      the pty/tty pair, and then tty_ldisc_release dropping and relocking one
      side only.  We can drop both fine, so drop both to avoid any lock
      ordering concerns.
      
      Rework the release path to fix the new locking model.
      Signed-off-by: default avatarAlan Cox <alan@linux.intel.com>
      Acked-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8f6576ad
    • Alan Cox's avatar
      pty: Fix lock inversion · d3ca8b64
      Alan Cox authored
      The ptmx_open path takes the tty and devpts locks in the wrong order
      because tty_init_dev locks and returns a locked tty.  As far as I can
      tell this is actually safe anyway because the tty being returned is new
      so nobody can get a reference to lock it at this point.
      
      However we don't even need the devpts lock at this point, it's only held
      as a byproduct of the way the locks were pushe down.
      Signed-off-by: default avatarAlan Cox <alan@linux.intel.com>
      Acked-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d3ca8b64
  2. 28 May, 2012 13 commits
  3. 27 May, 2012 5 commits
  4. 26 May, 2012 8 commits
    • Linus Torvalds's avatar
      Merge branch 'generic-string-functions' · 1e2aec87
      Linus Torvalds authored
      This makes <asm/word-at-a-time.h> actually live up to its promise of
      allowing architectures to help tune the string functions that do their
      work a word at a time.
      
      David had already taken the x86 strncpy_from_user() function, modified
      it to work on sparc, and then done the extra work to make it generically
      useful.  This then expands on that work by making x86 use that generic
      version, completing the circle.
      
      But more importantly, it fixes up the word-at-a-time interfaces so that
      it's now easy to also support things like strnlen_user(), and pretty
      much most random string functions.
      
      David reports that it all works fine on sparc, and Jonas Bonn reported
      that an earlier version of this worked on OpenRISC too.  It's pretty
      easy for architectures to add support for this and just replace their
      private versions with the generic code.
      
      * generic-string-functions:
        sparc: use the new generic strnlen_user() function
        x86: use the new generic strnlen_user() function
        lib: add generic strnlen_user() function
        word-at-a-time: make the interfaces truly generic
        x86: use generic strncpy_from_user routine
      1e2aec87
    • Lekensteyn's avatar
      builddeb: include autogenerated header files · 19a4b988
      Lekensteyn authored
      After 303395ac, some headers are
      autogenerated. Include these autogenerated headers (mainly
      unistd_32_ia32.h) in out-of-tree builds to allow DKMS modules to be
      built succesfully.
      Signed-off-by: default avatarPeter Lekensteyn <lekensteyn@gmail.com>
      Signed-off-by: default avatarMichal Marek <mmarek@suse.cz>
      19a4b988
    • Linus Torvalds's avatar
      Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux · ae32adc1
      Linus Torvalds authored
      Pull i2c-embedded changes from Wolfram Sang:
       "Major changes:
      
         - lots of devicetree additions for existing drivers.  I tried hard to
           make sure the bindings are proper.  In more complicated cases, I
           requested acks from people having more experience with them than
           me.  That took a bit of extra time and also some time went into
           discussions with developers about what bindings are and what not.
           I have the feeling that the workflow with bindings should be
           improved to scale better.  I will spend some more thought on
           this...
      
         - i2c-muxes are succesfully used meanwhile, so we dropped
           EXPERIMENTAL for them and renamed the drivers to a standard pattern
           to match the rest of the subsystem.  They can also be used with
           devicetree now.
      
         - ixp2000 was removed since the whole platform goes away.
      
         - cleanups (strlcpy instead of strcpy, NULL instead of 0)
      
         - The rest is typical driver fixes I assume.
      
        All patches have been in linux-next at least since v3.4-rc6."
      
      Fixed up trivial conflict in arch/arm/mach-lpc32xx/common.c due to the
      same patch already having come in through the arm/soc trees, with
      additional patches on top of it.
      
      * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (35 commits)
        i2c: davinci: Free requested IRQ in remove
        i2c: ocores: register OF i2c devices
        i2c: tegra: notify transfer-complete after clearing status.
        I2C: xiic: Add OF binding support
        i2c: Rename last mux driver to standard pattern
        i2c: tegra: fix 10bit address configuration
        i2c: muxes: rename first set of drivers to a standard pattern
        of/i2c: implement of_find_i2c_adapter_by_node
        i2c: implement i2c_verify_adapter
        i2c-s3c2410: Add HDMIPHY quirk for S3C2440
        i2c-s3c2410: Rework device type handling
        i2c: muxes are not EXPERIMENTAL anymore
        i2c/of: Automatically populate i2c mux busses from device tree data.
        i2c: Add a struct device * parameter to i2c_add_mux_adapter()
        of/i2c: call i2c_verify_client from of_find_i2c_device_by_node
        i2c: designware: Add clk_{un}prepare() support
        i2c: designware: add PM support
        i2c: ixp2000: remove driver
        i2c: pnx: add device tree support
        i2c: imx: don't use strcpy but strlcpy
        ...
      ae32adc1
    • Linus Torvalds's avatar
      Merge tag 'cleanup-initcall' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · f465d145
      Linus Torvalds authored
      Pull sweeping late_initcall cleanup for arm-soc from Olof Johansson:
       "This is a patch series from Shawn Guo that moves from individual
        late_initcalls() to using a member in the machine structure to invoke
        a platform's late initcalls.
      
        This cleanup is a step in the move towards multiplatform kernels since
        it would reduce the need to check for compatible platforms in each and
        every initcall."
      
      Fix up trivial conflicts in arch/arm/mach-{exynos/mach-universal_c210.c,
      imx/mach-cpuimx51.c, omap2/board-generic.c} due to changes nearby (and,
      in the case of cpuimx51.c the board support being deleted)
      
      * tag 'cleanup-initcall' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
        ARM: ux500: use machine specific hook for late init
        ARM: tegra: use machine specific hook for late init
        ARM: shmobile: use machine specific hook for late init
        ARM: sa1100: use machine specific hook for late init
        ARM: s3c64xx: use machine specific hook for late init
        ARM: prima2: use machine specific hook for late init
        ARM: pnx4008: use machine specific hook for late init
        ARM: omap2: use machine specific hook for late init
        ARM: omap1: use machine specific hook for late init
        ARM: msm: use machine specific hook for late init
        ARM: imx: use machine specific hook for late init
        ARM: exynos: use machine specific hook for late init
        ARM: ep93xx: use machine specific hook for late init
        ARM: davinci: use machine specific hook for late init
        ARM: provide a late_initcall hook for platform initialization
      f465d145
    • Linus Torvalds's avatar
      Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 30b84288
      Linus Torvalds authored
      Pull arm-soc: soc specific changes (part 2) from Olof Johansson:
       "This adds support for the spear13xx platform, which has first been
        under review a long time ago and finally been completed after generic
        spear work has gone into the clock, dt and pinctrl branches.
      
        Also a number of updates for the samsung socs are part of this branch."
      
      Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much
      worse than they are: the exonys5 init code was refactored in commit
      fd454997 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and
      then commit f10590c9 ("ARM: EXYNOS: add GPC4 bank instance") added a
      new gpio chip define and did tiny updates to the init code.
      
      So the conflict diff looks like hell, but it's actually a fairly simple
      change.
      
      * tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
        ARM: exynos: fix building with CONFIG_OF disabled
        ARM: EXYNOS: Add AUXDATA for i2c controllers
        ARM: dts: Update device tree source files for EXYNOS5250
        ARM: EXYNOS: Add device tree support for interrupt combiner
        ARM: EXYNOS: Add irq_domain support for interrupt combiner
        ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5
        ARM: EXYNOS: update irqs for EXYNOS5250 SoC
        ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll
        ARM: EXYNOS: add GPC4 bank instance
        ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition
        ARM: EXYNOS: Modify the GIC physical address for static io-mapping
        ARM: EXYNOS: Add watchdog timer clock instance
        pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res
        SPEAr: Update MAINTAINERS and Documentation
        SPEAr13xx: Add defconfig
        SPEAr13xx: Add compilation support
        SPEAr13xx: Add dts and dtsi files
        pinctrl: Add SPEAr13xx pinctrl drivers
        pinctrl: SPEAr: Create macro for declaring GPIO PINS
        SPEAr13xx: Add common clock framework support
        ...
      30b84288
    • Linus Torvalds's avatar
      Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 84a442b9
      Linus Torvalds authored
      Pull arm-soc device tree conversions (part 2) from Olof Johansson:
       "These continue the device tree work from part 1, this set is for the
        tegra, mxs and imx platforms, all of which have dependencies on clock
        or pinctrl changes submitted earlier."
      
      Fix up trivial conflicts due to nearby changes in
      drivers/{gpio/gpio,i2c/busses/i2c}-mxs.c
      
      * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
        ARM: dt: tegra: invert status=disable vs status=okay
        ARM: dt: tegra: consistent basic property ordering
        ARM: dt: tegra: sort nodes based on bus order
        ARM: dt: tegra: remove duplicate device_type property
        ARM: dt: tegra: consistenly use lower-case for hex constants
        ARM: dt: tegra: format regs properties consistently
        ARM: dt: tegra: gpio comment cleanup
        ARM: dt: tegra: remove unnecessary unit addresses
        ARM: dt: tegra: whitespace cleanup
        ARM: dt: tegra cardhu: fix typo in SDHCI node name
        ARM: dt: tegra: cardhu: register core regulator tps62361
        ARM: dt: tegra30.dtsi: Add SMMU node
        ARM: dt: tegra20.dtsi: Add GART node
        ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes
        ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes
        ARM: dt: tegra: Add device tree support for AHB
        ARM: dts: enable audio support for imx28-evk
        ARM: dts: enable i2c device for imx28-evk
        i2c: mxs: add device tree probe support
        ARM: dts: enable mmc for imx28-evk
        ...
      84a442b9
    • Linus Torvalds's avatar
      Merge tag 'stmp-dev' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 39b6cc66
      Linus Torvalds authored
      Pull arm-soc stmp-dev library code from Olof Johansson:
       "A number of devices are using a common register layout, this adds
        support code for it in lib/stmp_device.c so we do not need to
        duplicate it in each driver."
      
      Fix up trivial conflicts in drivers/i2c/busses/i2c-mxs.c and
      lib/Makefile
      
      * tag 'stmp-dev' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
        i2c: mxs: use global reset function
        lib: add support for stmp-style devices
      39b6cc66
    • Linus Torvalds's avatar
      Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 27953437
      Linus Torvalds authored
      Pull arm-soc clock driver changes from Olof Johansson:
       "The new clock subsystem was merged in linux-3.4 without any users,
        this now moves the first three platforms over to it: imx, mxs and
        spear.
      
        The series also contains the changes for the clock subsystem itself,
        since Mike preferred to have it together with the platforms that
        require these changes, in order to avoid interdependencies and
        conflicts."
      
      Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code
      removed in one branch, added OF support in another) and
      drivers/dma/imx-sdma.c (independent changes next to each other).
      
      * tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
        clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().
        clk: Provide dummy clk_unregister()
        SPEAr: Update defconfigs
        SPEAr: Add SMI NOR partition info in dts files
        SPEAr: Switch to common clock framework
        SPEAr: Call clk_prepare() before calling clk_enable
        SPEAr: clk: Add General Purpose Timer Synthesizer clock
        SPEAr: clk: Add Fractional Synthesizer clock
        SPEAr: clk: Add Auxiliary Synthesizer clock
        SPEAr: clk: Add VCO-PLL Synthesizer clock
        SPEAr: Add DT bindings for SPEAr's timer
        ARM i.MX: remove now unused clock files
        ARM: i.MX6: implement clocks using common clock framework
        ARM i.MX35: implement clocks using common clock framework
        ARM i.MX5: implement clocks using common clock framework
        ARM: Kirkwood: Replace clock gating
        ARM: Orion: Audio: Add clk/clkdev support
        ARM: Orion: PCIE: Add support for clk
        ARM: Orion: XOR: Add support for clk
        ARM: Orion: CESA: Add support for clk
        ...
      27953437