- 13 Jan, 2010 32 commits
-
-
Heiko Carstens authored
Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
It's not obvious that copy_from_user() is called with a sane length parameter here. Even though it currently seems to be correct better add a check to prevent stack corruption / exploits. Signed-off-by:
-
Heiko Carstens authored
sys_recvmmsg is reachable via sys_socketcall. So unwire it again since there is no point in having two entry points for it. Also put it to the ignore list so we don't get reminded anymore in order to wire it up. Signed-off-by:
-
Heiko Carstens authored
...instead of adding a compat ioctl function which would do nothing as well. Signed-off-by:
-
Heiko Carstens authored
Signed-off-by:
-
Heiko Carstens authored
Signed-off-by:
-
Heiko Carstens authored
This one will trap, generates shorter code and emits better debug data than the generic version. Signed-off-by:
-
Heiko Carstens authored
Finally move it to the place where it belongs to and make get rid of it for !CONFIG_SMP. Signed-off-by:
-
Heiko Carstens authored
This is just a complicated construct which always returns -EINVAL. Just remove it. Signed-off-by:
-
Heiko Carstens authored
Remove pointless qualifier. Signed-off-by:
-
Heiko Carstens authored
smp_processor_id() is supposed to work before setup_arch() gets called. Before that smp_processor_id() may return just an arbitrary value that is contained in the uninitialized boot lowcore. So provide the arch function which will override the weak function in init/main.c. Signed-off-by:
-
Jiri Slaby authored
Make sure compiler won't do weird things with limits. E.g. fetching them twice may return 2 different values after writable limits are implemented. I.e. either use rlimit helpers added in 3e10e716 or ACCESS_ONCE if not applicable. Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Heiko Carstens authored
Add missing compat ptr conversion including two additional whitespace changes that aren't worth a separate patch. Signed-off-by:
-
Heiko Carstens authored
Signed-off-by:
-
Heiko Carstens authored
Signed-off-by:
-
Heiko Carstens authored
Signed-off-by:
-
Martin Schwidefsky authored
The TIF_USEDFPU bit is always 0 for s390 and it is not tested anywhere. Remove the bit. At the same time remove the calls to clear_used_math() as well. The PF_USED_MATH bit is never set for s390 either. Signed-off-by: -
Martin Schwidefsky authored
The code in do_signal sets the TIF_SINGLE_STEP bit and calls tracehook_signal_handler after the signal frame has been set up. This causes two SIGTRAP signals to be delivered to the tracer. Stop setting the TIF_SINGLE_STEP bit in do_signal to get the correct number of SIGTRAPs. Signed-off-by: -
Martin Schwidefsky authored
Clear the TIF_SINGLE_STEP bit in copy_thread. The new process did not get a PER event of its own. It is wrong deliver a SIGTRAP that was meant for the parent process. Signed-off-by: -
Martin Schwidefsky authored
If the current task enables / disables PER tracing for itself the PER control registers need to be loaded in FixPerRegisters. Signed-off-by: -
Linus Torvalds authored
-
git://git.infradead.org/battery-2.6Linus Torvalds authored
* git://git.infradead.org/battery-2.6: pmu_battery: Fix battery full reporting
-
Bryn M. Reeves authored
/sys/bus/pci/drivers/megaraid_sas/poll_mode_io defaults to being world-writable, which seems bad (letting any user affect kernel driver behavior). This turns off group and user write permissions, so that on typical production systems only root can write to it. Signed-off-by:
Bryn M. Reeves <bmr@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds authored
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: OMAP: DSS2: OMAPFB: fix crash when panel driver was not loaded OMAP: DSS2: Reject scaling settings when they cannot be supported OMAP: DSS2: Make check-delay-loops consistent OMAP: DSS2: OMAPFB: fix omapfb_free_fbmem() video/omap: add __init/__exit macros to drivers/video/omap/lcd_htcherald.c OMAP: DSS2: Fix compile warning MAINTAINERS: Combine DSS2 and OMAPFB2 into one entry MAINTAINERS: change omapfb maintainer OMAP: OMAPFB: add dummy release function for omapdss OMAP: OMAPFB: fix clk_get for RFBI OMAP: DSS2: RFBI: convert to new kfifo API OMAP: DSS2: Fix crash when panel doesn't define enable_te() OMAP: DSS2: Collect interrupt statistics OMAP: DSS2: DSI: print debug DCS cmd in hex OMAP: DSS2: DSI: fix VC channels in send_short and send_null
-
Dave Chinner authored
There are two copies of list_sort() in the tree already, one in the DRM code, another in ubifs. Now XFS needs this as well. Create a generic list_sort() function from the ubifs version and convert existing users to it so we don't end up with yet another copy in the tree. Signed-off-by:
Dave Chinner <david@fromorbit.com> Acked-by:
Dave Airlie <airlied@redhat.com> Acked-by:
Artem Bityutskiy <dedekind@infradead.org> Signed-off-by:
-
Dave Jones authored
Maybe this will stop people emailing me about it. Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: retry link resume if necessary ata_piix: enable 32bit PIO on SATA piix sata_promise: don't classify overruns as HSM errors
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: Ensure ARMv6/7 mm files are built using appropriate assembler options ARM: Fix wrong dmb ARM: 5874/1: serial21285: fix disable_irq-from-interrupt-handler deadlock ARM: 5873/1: ARM: Fix the reset logic for ARM RealView boards ARM: 5872/1: ARM: include needed linux/cpu.h in asm/cpu.h ARM: 5871/1: arch/arm: Fix build failure for lpd7a404_defconfig caused by missing includes ARM: 5870/1: arch/arm: Fix build failure for defconfigs without CONFIG_ISA_DMA_API set ARM: 5868/1: ARM: fix "BUG: using smp_processor_id() in preemptible code" ARM: 5867/1: Update U300 defconfig ARM: 5866/1: arm ptrace: use unsigned types for kernel pt_regs [ARM] pxa: fix strange characters in zaurus gpio .desc ARM: add missing recvmmsg syscall number [ARM] pxa: fix compiler warnings of unused variable 'id' in cpu_is_pxa9*() [ARM] pxa: update pwm_backlight->notify() to include missed 'struct device *' [ARM] pxa: enable L2 if present in XSC3 [ARM] pxa: do not enable L2 after MMU is enabled
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (22 commits) MIPS: Ignore vmlinux.* MIPS: Move vmlinux.ecoff to arch/mips/boot MIPS: cpumask_of_node() should handle -1 as a node MIPS: Octeon: Use non-overflowing arithmetic in sched_clock MIPS: Malta, PowerTV: Remove unnecessary "Linux started" MIPS: BCM63xx: Remove duplicate CONFIG_CMDLINE. MIPS: AR7: Remove unused prom_getchar() MIPS: PowerTV: Remove extra r4k_clockevent_init() call MIPS: Cobalt use strlcat() for the command line arguments MIPS: Octeon: Add sched_clock() to csrc-octeon.c MIPS: TXx9: Cleanup builtin-cmdline processing MIPS: PowerTV: simplify prom_init_cmdline() and merge into prom_init() MIPS: PowerTV: Remove unused platform_die() MIPS: PowerTV: Remove mips_machine_halt() MIPS: PowerTV: Remove unused ptv_memsize MIPS: PowerTV: Remove unused prom_getcmdline() MIPS: AR7: Remove kgdb_enabled MIPS: Alchemy: Correct code taking the size of a pointer MIPS: BCM63xx: Fix whitespace damaged board_bcm963xx.c MIPS: VR41xx: Use strlcat() for the command line arguments ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix ALC861-VD capture source mixer ALSA: ac97: add AC97 STMicroelectronics' codecs ALSA: ac97: Add Dell Dimension 2400 to Headphone/Line Jack Sense blacklist ASoC: Fix WM8350 DSP mode B configuration sbawe: fix memory detection part 2 sound: oss: off by one bug ALSA: usb-audio - Avoid Oops after disconnect ALSA: test off by one in setsamplerate() ALSA: atiixp: Specify codec for Foxconn RC4107MA-RS2
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits) sky2: Fix oops in sky2_xmit_frame() after TX timeout Documentation/3c509: document ethtool support af_packet: Don't use skb after dev_queue_xmit() vxge: use pci_dma_mapping_error to test return value netfilter: ebtables: enforce CAP_NET_ADMIN e1000e: fix and commonize code for setting the receive address registers e1000e: e1000e_enable_tx_pkt_filtering() returns wrong value e1000e: perform 10/100 adaptive IFS only on parts that support it e1000e: don't accumulate PHY statistics on PHY read failure e1000e: call pci_save_state() after pci_restore_state() netxen: update version to 4.0.72 netxen: fix set mac addr netxen: fix smatch warning netxen: fix tx ring memory leak tcp: update the netstamp_needed counter when cloning sockets TI DaVinci EMAC: Handle emac module clock correctly. dmfe/tulip: Let dmfe handle DM910x except for SPARC on-board chips ixgbe: Fix compiler warning about variable being used uninitialized netfilter: nf_ct_ftp: fix out of bounds read in update_nl_seq() mv643xx_eth: don't include cache padding in rx desc buffer size ... Fix trivial conflict in drivers/scsi/cxgb3i/cxgb3i_offload.c
-
Greg Ungerer authored
Fix compilation breakage of all m68knommu targets: CC arch/m68knommu/kernel/asm-offsets.s In file included from include/linux/sched.h:77, from arch/m68knommu/kernel/asm-offsets.c:12: include/linux/percpu.h: In function 'per_cpu_ptr_to_phys': include/linux/percpu.h:161: error: implicit declaration of function 'virt_to_phy This is broken in linux-2.6.33-rc3. Change the definitions of __pa() and __va() to not use virt_to_phys() and phys_to_virt(). Trivial 1:1 conversion required for the non-MMU case. A side effect if this is that the m68knommu can now use asm/virtconvert.h for the definition of virt_to_phys() and phys_to_virt(). Also cleaned up the definition of page_to_phys() when moving into virtconvert.h. Signed-off-by:Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
- 12 Jan, 2010 8 commits
-
-
Tejun Heo authored
Interestingly, when SIDPR is used in ata_piix, writes to DET in SControl sometimes get ignored leading to detection failure. Update sata_link_resume() such that it reads back SControl after clearing DET and retry if it's not clear. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
fengxiangjun <fengxiangjun@neusoft.com> Reported-by:
Jim Faulkner <jfaulkne@ccs.neu.edu> Cc: stable@kernel.org Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Tejun Heo authored
Commit 871af121 enabled 32bit PIO for PATA piix but didn't for SATA. There's no reason not to use 32bit PIO on SATA piix. Enable it. Signed-off-by:
-
Mikael Pettersson authored
When sata_promise encounters an overrun or underrun error it translates that to a libata AC_ERR_HSM, causing a hard reset. Since over/under-runs were thought to be rare and transient, this action seemed reasonable. Unfortunately it turns out that the controller throws overrun errors when e.g. hal polls a CD or DVD writer containing blank media, causing long sequences of hard resets and retries before EH finally gives up. This patch updates sata_promise to classify over/under-runs as AC_ERR_OTHER instead. This allows libata EH and upper layers to retry or fail the operation as they see fit without the disruption caused by repeated hard resets. This fixes a problem using a DVD-RAM drive with sata_promise, reported by Thomas Schorpp. I also tested it on a DVD-RW drive. Signed-off-by:
Mikael Pettersson <mikpe@it.uu.se> Tested-by:
thomas schorpp <thomas.schorpp@googlemail.com> Signed-off-by:
-
Russell King authored
A kernel with both ARMv6 and ARMv7 selected results in build errors. Fix this by specifying the proper architectures for these assembly files. Signed-off-by:Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
The __kuser_cmpxchg code uses an ARMv6 dmb instruction, rather than one based upon the architecture being built for. Switch to using the macro provided for this purpose, which also eliminates the need for an ifdef. Acked-by:
Nicolas Pitre <nico@fluxnic.net> Signed-off-by:
-
Yoichi Yuasa authored
Signed-off-by:
Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/795/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Yoichi Yuasa authored
It moves to the same directory as the boot files in other formats. Signed-off-by:
-
Anton Blanchard authored
pcibus_to_node can return -1 if we cannot determine which node a pci bus is on. If passed -1, cpumask_of_node will negatively index the lookup array and pull in random data: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus 00000000,00000003,00000000,00000000 # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 64-65 Change cpumask_of_node to check for -1 and return cpu_all_mask in this case: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus ffffffff,ffffffff,ffffffff,ffffffff # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 0-127 Signed-off-by:
Anton Blanchard <anton@samba.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Patchwork: http://patchwork.linux-mips.org/patch/831/Signed-off-by:
-
