- 21 Dec, 2023 40 commits
-
-
Vinay Belgaumkar authored
Prep this file to contain C6 toggling as well instead of just sysfs related stuff. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by:
-
Michal Wajdeczko authored
Our xe_assert() macros are well documented. Include that in master documentation. Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20231115112921.1905-1-michal.wajdeczko@intel.comSigned-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
-
Michal Wajdeczko authored
On i915 we were adding new GuC ABI headers directly to guc_fwif.h file since we were replacing old definitions from that file. On xe driver we could do more and better by including ABI headers only in files that need those definitions. Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/741 Cc: Jani Nikula <jani.nikula@intel.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20231128203203.1147-3-michal.wajdeczko@intel.comSigned-off-by:
-
Michal Wajdeczko authored
Refer to already described CTB Descriptor and CTB HXG Message. Reviewed-by:
-
Michal Wajdeczko authored
Those definitions were applicable for old GuC firmwares only. Reviewed-by:
-
Fei Yang authored
Confirmed with hardware that setting GGTT memory access for GuC firmware loading is correct for all platforms and required for new platforms going forward. Signed-off-by:
Fei Yang <fei.yang@intel.com> Reviewed-by:
-
Matthew Auld authored
Allow userspace to directly control the pat_index for a given vm binding. This should allow directly controlling the coherency, caching behaviour, compression and potentially other stuff in the future for the ppGTT binding. The exact meaning behind the pat_index is very platform specific (see BSpec or PRMs) but effectively maps to some predefined memory attributes. From the KMD pov we only care about the coherency that is provided by the pat_index, which falls into either NONE, 1WAY or 2WAY. The vm_bind coherency mode for the given pat_index needs to be at least 1way coherent when using cpu_caching with DRM_XE_GEM_CPU_CACHING_WB. For platforms that lack the explicit coherency mode attribute, we treat UC/WT/WC as NONE and WB as AT_LEAST_1WAY. For userptr mappings we lack a corresponding gem object, so the expected coherency mode is instead implicit and must fall into either 1WAY or 2WAY. Trying to use NONE will be rejected by the kernel. For imported dma-buf (from a different device) the coherency mode is also implicit and must also be either 1WAY or 2WAY. v2: - Undefined coh_mode(pat_index) can now be treated as programmer error. (Matt Roper) - We now allow gem_create.coh_mode <= coh_mode(pat_index), rather than having to match exactly. This ensures imported dma-buf can always just use 1way (or even 2way), now that we also bundle 1way/2way into at_least_1way. We still require 1way/2way for external dma-buf, but the policy can now be the same for self-import, if desired. - Use u16 for pat_index in uapi. u32 is massive overkill. (José) - Move as much of the pat_index validation as we can into vm_bind_ioctl_check_args. (José) v3 (Matt Roper): - Split the pte_encode() refactoring into separate patch. v4: - Rebase v5: - Check for and reject !coh_mode which would indicate hw reserved pat_index on xe2. v6: - Rebase on removal of coh_mode from uapi. We just need to reject cpu_caching=wb + pat_index with coh_none. Testcase: igt@xe_pat Bspec: 45101, 44235 #xe Bspec: 70552, 71582, 59400 #xe2 Signed-off-by:Matthew Auld <matthew.auld@intel.com> Cc: Pallavi Mishra <pallavi.mishra@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Filip Hazubski <filip.hazubski@intel.com> Cc: Carl Zhang <carl.zhang@intel.com> Cc: Effie Yu <effie.yu@intel.com> Cc: Zhengguo Xu <zhengguo.xu@intel.com> Cc: Francois Dugast <francois.dugast@intel.com> Tested-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Zhengguo Xu <zhengguo.xu@intel.com> Acked-by:
Bartosz Dunajski <bartosz.dunajski@intel.com> Signed-off-by:
-
Matthew Auld authored
Future uapi needs to give userspace the ability to select the pat_index for a given vm_bind. However we need to be able to extract the coherency mode from the provided pat_index to ensure it's compatible with the cpu_caching mode set at object creation. There are various security reasons for why this matters. However the pat_index itself is very platform specific, so seems reasonable to annotate each platform definition of the pat table. On some older platforms there is no explicit coherency mode, so we just pick whatever makes sense. v2: - Simplify with COH_AT_LEAST_1_WAY - Add some kernel-doc v3 (Matt Roper): - Some small tweaks v4: - Rebase v5: - Rebase on Xe2 PAT additions v6: - Rebase on removal of coh_mode from uapi Bspec: 45101, 44235 #xe Bspec: 70552, 71582, 59400 #xe2 Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Pallavi Mishra <pallavi.mishra@intel.com> Signed-off-by:
-
Pallavi Mishra authored
Allow userspace to specify the CPU caching mode at object creation. Modify gem create handler and introduce xe_bo_create_user to replace xe_bo_create. In a later patch we will support setting the pat_index as part of vm_bind, where expectation is that the coherency mode extracted from the pat_index must be least 1way coherent if using cpu_caching=wb. v2 - s/smem_caching/smem_cpu_caching/ and s/XE_GEM_CACHING/XE_GEM_CPU_CACHING/. (Matt Roper) - Drop COH_2WAY and just use COH_NONE + COH_AT_LEAST_1WAY; KMD mostly just cares that zeroing/swap-in can't be bypassed with the given smem_caching mode. (Matt Roper) - Fix broken range check for coh_mode and smem_cpu_caching and also don't use constant value, but the already defined macros. (José) - Prefer switch statement for smem_cpu_caching -> ttm_caching. (José) - Add note in kernel-doc for dgpu and coherency modes for system memory. (José) v3 (José): - Make sure to reject coh_mode == 0 for VRAM-only. - Also make sure to actually pass along the (start, end) for __xe_bo_create_locked. v4 - Drop UC caching mode. Can be added back if we need it. (Matt Roper) - s/smem_cpu_caching/cpu_caching. Idea is that VRAM is always WC, but that is currently implicit and KMD controlled. Make it explicit in the uapi with the limitation that it currently must be WC. For VRAM + SYS objects userspace must now select WC. (José) - Make sure to initialize bo_flags. (José) v5 - Make to align with the other uapi and prefix uapi constants with DRM_ (José) v6: - Make it clear that zero cpu_caching is only allowed for kernel objects. (José) v7: (Oak) - With all the changes from the original design, it looks we can further simplify here and drop the explicit coh_mode. We can just infer the coh_mode from the cpu_caching. i.e reject cpu_caching=wb + coh_none. It's one less thing for userspace to maintain so seems worth it. v8: - Make sure to also update the kselftests. Testcase: igt@xe_mmap@cpu-caching Signed-off-by: -
Michal Wajdeczko authored
In xe_call_for_each_device() we are already counting number of iterated devices. Lets make that available to the caller too. We will use that functionality in upcoming patches. Reviewed-by:
-
Matthew Auld authored
We spawn some hw queues during device probe to generate the default LRC for every engine type, however the queue destruction step is typically async. Queue destruction needs to do stuff like GuC context deregister which requires GuC CT, which in turn requires an active mem_access ref. The caller during probe is meant to hold the mem_access token, however due to the async destruction it might have already been dropped if we are unlucky. Similar to how we already handle migrate VMs for which there is no mem_access ref, fix this by keeping the callers token alive, releasing it only when destroying the queue. We can treat a NULL vm as indication that we need to grab our own extra ref. Fixes the following splat sometimes seen during load: [ 1682.899930] WARNING: CPU: 1 PID: 8642 at drivers/gpu/drm/xe/xe_device.c:537 xe_device_assert_mem_access+0x27/0x30 [xe] [ 1682.900209] CPU: 1 PID: 8642 Comm: kworker/u24:97 Tainted: G U W E N 6.6.0-rc3+ #6 [ 1682.900214] Workqueue: submit_wq xe_sched_process_msg_work [xe] [ 1682.900303] RIP: 0010:xe_device_assert_mem_access+0x27/0x30 [xe] [ 1682.900388] Code: 90 90 90 66 0f 1f 00 0f 1f 44 00 00 53 48 89 fb e8 1e 6c 03 00 48 85 c0 74 06 5b c3 cc cc cc cc 8b 83 28 23 00 00 85 c0 75 f0 <0f> 0b 5b c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 [ 1682.900390] RSP: 0018:ffffc900021cfb68 EFLAGS: 00010246 [ 1682.900394] RAX: 0000000000000000 RBX: ffff8886a96d8000 RCX: 0000000000000000 [ 1682.900396] RDX: 0000000000000001 RSI: ffff8886a6311a00 RDI: ffff8886a96d8000 [ 1682.900398] RBP: ffffc900021cfcc0 R08: 0000000000000001 R09: 0000000000000000 [ 1682.900400] R10: ffffc900021cfcd0 R11: 0000000000000002 R12: 0000000000000004 [ 1682.900402] R13: 0000000000000000 R14: ffff8886a6311990 R15: ffffc900021cfd74 [ 1682.900405] FS: 0000000000000000(0000) GS:ffff888829880000(0000) knlGS:0000000000000000 [ 1682.900407] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1682.900409] CR2: 000055f70bad3fb0 CR3: 000000025243a004 CR4: 00000000003706e0 [ 1682.900412] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1682.900413] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1682.900415] Call Trace: [ 1682.900418] <TASK> [ 1682.900420] ? xe_device_assert_mem_access+0x27/0x30 [xe] [ 1682.900504] ? __warn+0x85/0x170 [ 1682.900510] ? xe_device_assert_mem_access+0x27/0x30 [xe] [ 1682.900596] ? report_bug+0x171/0x1a0 [ 1682.900604] ? handle_bug+0x3c/0x80 [ 1682.900608] ? exc_invalid_op+0x17/0x70 [ 1682.900612] ? asm_exc_invalid_op+0x1a/0x20 [ 1682.900621] ? xe_device_assert_mem_access+0x27/0x30 [xe] [ 1682.900706] ? xe_device_assert_mem_access+0x12/0x30 [xe] [ 1682.900790] guc_ct_send_locked+0xb9/0x1550 [xe] [ 1682.900882] ? lock_acquire+0xca/0x2b0 [ 1682.900885] ? guc_ct_send+0x3c/0x1a0 [xe] [ 1682.900977] ? lock_is_held_type+0x9b/0x110 [ 1682.900984] ? __mutex_lock+0xc0/0xb90 [ 1682.900989] ? __pfx___drm_printfn_info+0x10/0x10 [ 1682.900999] guc_ct_send+0x53/0x1a0 [xe] [ 1682.901090] ? __lock_acquire+0xf22/0x21b0 [ 1682.901097] ? process_one_work+0x1a0/0x500 [ 1682.901109] xe_guc_ct_send+0x19/0x50 [xe] [ 1682.901202] set_min_preemption_timeout+0x75/0xa0 [xe] [ 1682.901294] disable_scheduling_deregister+0x55/0x250 [xe] [ 1682.901383] ? xe_sched_process_msg_work+0x76/0xd0 [xe] [ 1682.901467] ? lock_release+0xc9/0x260 [ 1682.901474] xe_sched_process_msg_work+0x82/0xd0 [xe] [ 1682.901559] process_one_work+0x20a/0x500 v2: Add the splat Signed-off-by:
-
Daniele Ceraolo Spurio authored
We track GSC FW based on its compatibility version, which is what determines the interface it supports. Also add a modparam override like the ones for GuC and HuC. v2: fix module param description (John) Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by:
John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
Add the GSCCS to the media_xelpmp engine list. Note that since the GSCCS is only used with the GSC FW, we can consider it disabled if we don't have the FW available. v2: mark GSCCS as allowed on the media IP in kunit tests Signed-off-by:
-
Daniele Ceraolo Spurio authored
The version is obtained via a dedicated MKHI GSC HECI command. The compatibility version is what we want to match against for the GSC, so we need to call the FW version checker after obtaining the version. Since this is the first time we send a GSC HECI command via the GSCCS, this patch also introduces common infrastructure to send such commands to the GSC. Communication with the GSC FW is done via input/output buffers, whose addresses are provided via a GSCCS command. The buffers contain a generic header and a client-specific packet (e.g. PXP, HDCP); the clients don't care about the header format and/or the GSCCS command in the batch, they only care about their client-specific header. This patch therefore introduces helpers that allow the callers to automatically fill in the input header, submit the GSCCS job and decode the output header, to make it so that the caller only needs to worry about their client-specific input and output messages. v3: squash of 2 separate patches ahead of merge, so that the common functions and their first user are added at the same time Signed-off-by:
Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
GSC is only killed by an FLR, so we need to trigger one on unload to make sure we stop it. This is because we assign a chunk of memory to the GSC as part of the FW load, so we need to make sure it stops using it when we release it to the system on driver unload. Note that this is not a problem of the unload per-se, because the GSC will not touch that memory unless there are requests for it coming from the driver; therefore, no accesses will happen while Xe is not loaded, but if we re-load the driver then the GSC might wake up and try to access that old memory location again. Signed-off-by:
-
Daniele Ceraolo Spurio authored
When the GSC FW is loaded, we need to inform it when a GSCCS reset is coming and then wait 200ms for it to get ready to process the reset. v2: move WA code to GSC file, use variable in Makefile (John) Signed-off-by:
-
Daniele Ceraolo Spurio authored
The GSC FW must be copied in a 4MB stolen memory allocation, whose GGTT address is then passed as a parameter to a dedicated load instruction submitted via the GSC engine. Since the GSC load is relatively slow (up to 250ms), we perform it asynchronously via a worker. This requires us to make sure that the worker has stopped before suspending/unloading. Note that we can't yet use xe_migrate_copy for the copy because it doesn't work with stolen memory right now, so we do a memcpy from the CPU side instead. v2: add comment about timeout value, fix GSC status checking before load (John) Bspec: 65306, 65346 Signed-off-by: -
Daniele Ceraolo Spurio authored
The GSC blob starts with a layout header, from which we can move to the boot directory, which in turns allows us to find the CPD. The CPD uses the same format as the one in the HuC binary, so we can re-use the same parsing code to get to the manifest, which contains the release and security versions of the FW. v2: Fix comments in struct definition (John) Signed-off-by:
-
Daniele Ceraolo Spurio authored
Add the basic definitions and init function. Same as HuC, GSC is only supported on the media GT on MTL and newer platforms. Note that the GSC requires submission resources which can't be allocated during init (because we don't have the hwconfig yet), so it can't be marked as loadable at the end of the init function. The allocation of those resources will come in the patch that makes use of them to load the FW. v2: better comment, move num FWs define inside the enum (John) Signed-off-by:
-
Daniele Ceraolo Spurio authored
The GSC firmware, support for which is coming soon for Xe, has both a release version (updated on every release) and a compatibility version (update only on interface changes). The GuC has something similar, with a global release version and a submission version (which is also known as the VF compatibility version). The main difference is that for the GuC we still want to check the driver requirement against the release version, while for the GSC we'll need to check against the compatibility version. Instead of special casing the GSC, this patch reworks the FW logic so that we store both versions at the uc_fw level for all binaries and we allow checking against either of the versions. Initially, we'll use it to support GSC, but the logic could be re-used to allow VFs to check against the GuC compatibility version. Note that the GSC version has 4 numbers (major, minor, hotfix, build), so support for that has been added as part of the rework and will be used in follow-up patches. Signed-off-by:
-
Bommithi Sakeena authored
Encapsulate all the module parameters in one single global struct variable. This also removes the extra xe_module.h from includes. v2: naming consistency as suggested by Jani and Lucas v3: fix checkpatch errors/warnings v4: adding blank line after struct declaration Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Bommithi Sakeena <bommithi.sakeena@intel.com> Reviewed-by:
-
Tejas Upadhyay authored
This workaround applies to Xe2_LPG A0 V3: - Apply rule RENDER class V2(Matt): - Apply WA in lrc context Reviewed-by:
Tejas Upadhyay <tejas.upadhyay@intel.com> Signed-off-by:
-
Matt Roper authored
The workaround database has been updated to drop this workaround for all DG2 variants. Reviewed-by:
Gustavo Sousa <gustavo.sousa@intel.com> Link: https://lore.kernel.org/r/20231127190332.4099519-2-matthew.d.roper@intel.comSigned-off-by:
-
Lucas De Marchi authored
For Xe1 platforms, it's better to follow the way i915 adds the PCI IDs to the header, so it's easier to catch up when there is an update. This brings the same logic applied in commit 2e3c369f ("drm/i915/mtl: Eliminate subplatforms") to the equivalent xe header. The end result of this header for Xe1 platforms is now in sync with i915 as of commit 5032c607 ("drm/i915: ATS-M device ID update"). This can be seen by $ git show 5032c607:include/drm/i915_pciids.h > a.h $ git diff --color-words --no-index a.h include/drm/xe_pciids.h Reviewed-by:
-
Thomas Hellström authored
The name "compute_mode" can be confusing since compute uses either this mode or fault_mode to achieve the long-running semantics, and compute_mode can, moving forward, enable fault_mode under the hood to work around hardware limitations. Also the name no_dma_fence_mode really refers to what we elsewhere call long-running mode and the mode contrary to what its name suggests allows dma-fences as in-fences. So in an attempt to be more consistent, rename no_dma_fence_mode -> lr_mode compute_mode -> preempt_fence_mode And adjust flags so that preempt_fence_mode sets XE_VM_FLAG_LR_MODE fault_mode sets XE_VM_FLAG_LR_MODE | XE_VM_FLAG_FAULT_MODE v2: - Fix a typo in the commit message (Oak Zeng) Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by:
Oak Zeng <oak.zeng@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127123349.23698-1-thomas.hellstrom@linux.intel.comSigned-off-by:
-
Thomas Hellström authored
xa_alloc_cyclic() returns 1 on successful allocation, if wrapping occurs, but the code incorrectly treats that as an error. Fix that. Also, xa_alloc_cyclic() requires xa_init_flags(..., XA_FLAGS_ALLOC), so fix that, and assuming we don't want a zero ASID, instead of using XA_FLAGS_ALLOC1, adjust the xa limits at alloc_cyclic time. v2: - On CONFIG_DRM_XE_DEBUG, Initialize the cyclic ASID allocation in such a way that the next allocated ASID will be the maximum one, and the one following will cause an ASID wrap, (all to have CI test high ASIDs and ASID wraps). v3: - Stricter return value checking from xa_alloc_cyclic() (Matthew Auld) Suggested-by:
Ohad Sharabi <osharabi@habana.ai> Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/946Signed-off-by:
-
Thomas Hellström authored
trace_printk() is not intended for production code. Remove it. Suggested-by:
-
Thomas Hellström authored
Using "get" typically refers to obtaining a refcount, which we don't do here so rename to xe_bo_sg(). Suggested-by:
-
Thomas Hellström authored
Ensure, using xe_assert that the various try_add_<placement> functions don't access the bo placements array out-of-bounds. v2: - Remove the places argument to make sure the xe_assert operates on the array we're actually populating. (Matthew Auld) Suggested-by:
-
Michal Wajdeczko authored
We already print some basic information about the device, add virtualization information, until we expose that elsewhere. Reviewed-by:
-
Michal Wajdeczko authored
We will be adding support for the SR-IOV and driver might be then running, in addition to existing non-virtualized bare-metal mode, also in Physical Function (PF) or Virtual Function (VF) mode. Since these additional modes require some changes to the driver, define enum flag to represent different SR-IOV modes and add a function where we will detect the actual mode in the runtime. We start with a forced bare-metal mode as it is sufficient to enable basic functionality and ensures no impact to existing code. Reviewed-by:
-
Michal Wajdeczko authored
The Single Root I/O Virtualization (SR-IOV) extension to the PCI Express (PCIe) specification suite is supported starting from 12th generation of Intel Graphics processors. Add a device flag that we will use to enable SR-IOV specific code paths and to indicate our readiness to support SR-IOV. We will enable this flag for the specific platforms once all required changes and additions will be ready and merged. Bspec: 52391 Reviewed-by:
-
Tejas Upadhyay authored
This workaround applies to Xe2_LPM V3(MattR): - Reorder reg and wa placement - Add base parameter to reg macro for better definition V2(MattR): - Change name of register - Loop for all engines - Driver permanent WA, applies to all steps Reviewed-by:
-
Tejas Upadhyay authored
This workaround applies to Xe2_LPM as well Reviewed-by:
-
Tejas Upadhyay authored
This workaround applies to Xe2_LPM Reviewed-by:
-
Gustavo Sousa authored
With the current implementation, a preemption or other kind of interrupt might happen between xe_mmio_read32() and ktime_get_raw(). Such an interruption (specially in the case of preemption) might be long enough to cause a timeout without giving a chance of a new check on the register value on a next iteration, which would have happened otherwise. This issue causes some sporadic timeouts in some code paths. As an example, we were experiencing some rare timeouts when waiting for PLL unlock for C10/C20 PHYs (see intel_cx0pll_disable()). After debugging, we found out that the PLL unlock was happening within the expected time period (20us), which suggested a bug in xe_mmio_wait32(). To fix the issue, ensure that we do a last check out of the loop if necessary. This change was tested with the aforementioned PLL unlocking code path. Experiments showed that, before this change, we observed reported timeouts in 54 of 5000 runs; and, after this change, no timeouts were reported in 5000 runs. v2: - Prefer an implementation without a barrier (v1 switched the order of xe_mmio_read32() and ktime_get_raw() calls and added a barrier() in between). (Lucas, Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: -
Gustavo Sousa authored
This function is big enough, let's move it to a shared compilation unit. While at it, document it. Here is the output of running bloat-o-metter on the new and old module (execution provided by Lucas): $ ./scripts/bloat-o-meter build64/drivers/gpu/drm/xe/xe.ko{.old,} add/remove: 2/0 grow/shrink: 0/58 up/down: 554/-15645 (-15091) (...) # Lines in between omitted Total: Before=2181322, After=2166231, chg -0.69% The overall reduction in the size is not that significant. Nevertheless, keeping the function as inline arguably does not bring too much benefit as well. As noted by Lucas, we would probably benefit from an inline function that did the fast-path check: do an optimistic first check before entering the wait-logic, which itself would go to a compilation unit. We might come back to implement this in the future if we have data to justify it. v2: - Add note in documentation for @timeout_us regarding the exponential backoff strategy. (Lucas) - Share output of bloat-o-meter in the commit message. (Lucas) Reviewed-by: -
Ruthuvikas Ravikumar authored
This kunit verifies the hardware values of mocs and l3cc registers with the KMD programmed values. v14: Fix CHECK. v13: Remove ret after forcewake. v11: Add KUNIT_ASSERT_EQ_MSG for Forcewake. v9/v10: Add Forcewake Fail. v8: Remove xe_bo.h and xe_pm.h Remove mocs and l3cc from live_mocs. Pull debug and err msg for mocs/l3cc out of if else block. Add HAS_LNCF_MOCS. v7: correct checkpath v6: Change ssize_t type. Change forcewake domain to XE_FW_GT. Update change of MOCS registers are multicast on Xe_HP and beyond patch. v5: Release forcewake. Remove single statement braces. Fix debug statements. v4: Drop stratch and vaddr. Fix debug statements. Fix indentation. v3: Fix checkpath. v2: Fix checkpath. Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Cc: Mathew D Roper <matthew.d.roper@intel.com> Reviewed-by:Ruthuvikas Ravikumar <ruthuvikas.ravikumar@intel.com> Link: https://lore.kernel.org/r/20231116215152.2248859-1-ruthuvikas.ravikumar@intel.comSigned-off-by:
-
Lucas De Marchi authored
When built with W=1, the following warnings show up on modpost: MODPOST drivers/gpu/drm/xe/Module.symvers WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/xe/tests/xe_bo_test.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/xe/tests/xe_dma_buf_test.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/xe/tests/xe_migrate_test.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/xe/tests/xe_pci_test.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/xe/tests/xe_rtp_test.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/xe/tests/xe_wa_test.o Add the module description for each of these to fix the warning. Reviewed-by:
-
Haridhar Kalvala authored
ATS-M device ID update. BSpec: 44477 Signed-off-by:
Haridhar Kalvala <haridhar.kalvala@intel.com> Reviewed-by:
-
