- 05 Feb, 2021 20 commits
-
-
Jakub Kicinski authored
Leon Romanovsky says: ==================== Fix W=1 compilation warnings in net/* folder Changelog: v2: * Patch 3: Added missing include file. v1: https://lore.kernel.org/lkml/20210203101612.4004322-1-leon@kernel.org * Removed Fixes lines. * Changed target from net to be net-next. * Patch 1: Moved function declaration to be outside config instead games with if/endif. * Patch 3: Moved declarations to new header file. v0: https://lore.kernel.org/lkml/20210202135544.3262383-1-leon@kernel.org ==================== Link: https://lore.kernel.org/r/20210203135112.4083711-1-leon@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Leon Romanovsky authored
Fix the following compilation warnings: net/netfilter/ipvs/ip_vs_proto_tcp.c:147:1: warning: no previous prototype for 'tcp_snat_handler' [-Wmissing-prototypes] 147 | tcp_snat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, | ^~~~~~~~~~~~~~~~ net/netfilter/ipvs/ip_vs_proto_udp.c:136:1: warning: no previous prototype for 'udp_snat_handler' [-Wmissing-prototypes] 136 | udp_snat_handler(struct sk_buff *skb, struct ip_vs_protocol *pp, | ^~~~~~~~~~~~~~~~ Signed-off-by:Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
Leon Romanovsky authored
Fir the following compilation warnings: 1031 | INDIRECT_CALLABLE_SCOPE void udp_v6_early_demux(struct sk_buff *skb) net/ipv6/ip6_offload.c:182:41: warning: no previous prototype for ‘ipv6_gro_receive’ [-Wmissing-prototypes] 182 | INDIRECT_CALLABLE_SCOPE struct sk_buff *ipv6_gro_receive(struct list_head *head, | ^~~~~~~~~~~~~~~~ net/ipv6/ip6_offload.c:320:29: warning: no previous prototype for ‘ipv6_gro_complete’ [-Wmissing-prototypes] 320 | INDIRECT_CALLABLE_SCOPE int ipv6_gro_complete(struct sk_buff *skb, int nhoff) | ^~~~~~~~~~~~~~~~~ net/ipv6/ip6_offload.c:182:41: warning: no previous prototype for ‘ipv6_gro_receive’ [-Wmissing-prototypes] 182 | INDIRECT_CALLABLE_SCOPE struct sk_buff *ipv6_gro_receive(struct list_head *head, | ^~~~~~~~~~~~~~~~ net/ipv6/ip6_offload.c:320:29: warning: no previous prototype for ‘ipv6_gro_complete’ [-Wmissing-prototypes] 320 | INDIRECT_CALLABLE_SCOPE int ipv6_gro_complete(struct sk_buff *skb, int nhoff) Signed-off-by: -
Leon Romanovsky authored
Fix the following compilation warning: net/ipv6/udp.c:1031:30: warning: no previous prototype for 'udp_v6_early_demux' [-Wmissing-prototypes] 1031 | INDIRECT_CALLABLE_SCOPE void udp_v6_early_demux(struct sk_buff *skb) | ^~~~~~~~~~~~~~~~~~ net/ipv6/udp.c:1072:29: warning: no previous prototype for 'udpv6_rcv' [-Wmissing-prototypes] 1072 | INDIRECT_CALLABLE_SCOPE int udpv6_rcv(struct sk_buff *skb) | ^~~~~~~~~ Signed-off-by: -
Leon Romanovsky authored
The W=1 compilation of allmodconfig generates the following warning: net/ipv6/icmp.c:448:6: warning: no previous prototype for 'icmp6_send' [-Wmissing-prototypes] 448 | void icmp6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info, | ^~~~~~~~~~ Fix it by providing function declaration for builds with ipv6 as a module. Signed-off-by: -
Colin Ian King authored
The null check of filp->f_path.dentry->d_iname is redundant because it is an array of DNAME_INLINE_LEN chars and cannot be a null. Fix this by removing the null check. Addresses-Coverity: ("Array compared against 0") Fixes: 04987ca1 ("net: hns3: add debugfs support for tm nodes, priority and qset info") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20210203131040.21656-1-colin.king@canonical.comSigned-off-by:
-
wengjianfeng authored
change 'piority' to 'priority' change 'succesfult' to 'successful' Signed-off-by:
wengjianfeng <wengjianfeng@yulong.com> Link: https://lore.kernel.org/r/20210203093842.11180-1-samirweng1979@163.comSigned-off-by:
-
Jakub Kicinski authored
Xin Long says: ==================== net: enable udp v6 sockets receiving v4 packets with UDP Currently, udp v6 socket can not process v4 packets with UDP GRO, as udp_encap_needed_key is not increased when udp_tunnel_encap_enable() is called for v6 socket. This patchset is to increase it and remove the unnecessary code in bareudp in Patch 1/2, and improve rxrpc encap_enable by calling udp_tunnel_encap_enable(). ==================== Link: https://lore.kernel.org/r/cover.1612342376.git.lucien.xin@gmail.comSigned-off-by:
-
Xin Long authored
When doing encap_enable/increasing encap_needed_key, up->encap_enabled is not set in rxrpc_open_socket(), and it will cause encap_needed_key not being decreased in udpv6_destroy_sock(). This patch is to improve it by just calling udp_tunnel_encap_enable() where it increases both UDP and UDPv6 encap_needed_key and sets up->encap_enabled. v4->v5: - add the missing '#include <net/udp_tunnel.h>', as David Howells noticed. Acked-and-tested-by:David Howells <dhowells@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
When enabling encap for a ipv6 socket without udp_encap_needed_key increased, UDP GRO won't work for v4 mapped v6 address packets as sk will be NULL in udp4_gro_receive(). This patch is to enable it by increasing udp_encap_needed_key for v6 sockets in udp_tunnel_encap_enable(), and correspondingly decrease udp_encap_needed_key in udpv6_destroy_sock(). v1->v2: - add udp_encap_disable() and export it. v2->v3: - add the change for rxrpc and bareudp into one patch, as Alex suggested. v3->v4: - move rxrpc part to another patch. Acked-by:Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Jian Yang authored
Traditionally loopback devices come up with initial state as DOWN for any new network-namespace. This would mean that anyone needing this device would have to bring this UP by issuing something like 'ip link set lo up'. This can be avoided if the initial state is set as UP. Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
Jian Yang <jianyang@google.com> Link: https://lore.kernel.org/r/20210201233445.2044327-1-jianyang.kernel@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Alexander Lobakin says: ==================== net: consolidate page_is_pfmemalloc() usage page_is_pfmemalloc() is used mostly by networking drivers to test if a page can be considered for reusing/recycling. It doesn't write anything to the struct page itself, so its sole argument can be constified, as well as the first argument of skb_propagate_pfmemalloc(). In Page Pool core code, it can be simply inlined instead. Most of the callers from NIC drivers were just doppelgangers of the same condition tests. Derive them into a new common function do deduplicate the code. Resend of v3 [2]: - it missed Patchwork and Netdev archives, probably due to server-side issues. Since v2 [1]: - use more intuitive name for the new inline function since there's nothing "reserved" in remote pages (Jakub Kicinski, John Hubbard); - fold likely() inside the helper itself to make driver code a bit fancier (Jakub Kicinski); - split function introduction and using into two separate commits; - collect some more tags (Jesse Brandeburg, David Rientjes). Since v1 [0]: - new: reduce code duplication by introducing a new common function to test if a page can be reused/recycled (David Rientjes); - collect autographs for Page Pool bits (Jesper Dangaard Brouer, Ilias Apalodimas). [0] https://lore.kernel.org/netdev/20210125164612.243838-1-alobakin@pm.me [1] https://lore.kernel.org/netdev/20210127201031.98544-1-alobakin@pm.me [2] https://lore.kernel.org/lkml/20210131120844.7529-1-alobakin@pm.me ==================== Link: https://lore.kernel.org/r/20210202133030.5760-1-alobakin@pm.meSigned-off-by:
-
Alexander Lobakin authored
pool_page_reusable() is a leftover from pre-NUMA-aware times. For now, this function is just a redundant wrapper over page_is_pfmemalloc(), so inline it into its sole call site. Signed-off-by:
Alexander Lobakin <alobakin@pm.me> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Alexander Lobakin authored
Now we can remove a bunch of identical functions from the drivers and make them use common dev_page_is_reusable(). All {,un}likely() checks are omitted since it's already present in this helper. Also update some comments near the call sites. Suggested-by: -
Alexander Lobakin authored
A bunch of drivers test the page before reusing/recycling for two common conditions: - if a page was allocated under memory pressure (pfmemalloc page); - if a page was allocated at a distant memory node (to exclude slowdowns). Introduce a new common inline for doing this, with likely() already folded inside to make driver code a bit simpler. Suggested-by:
-
Alexander Lobakin authored
The function doesn't write anything to the page struct itself, so this argument can be const. Misc: align second argument to the brace while at it. Signed-off-by:
-
Alexander Lobakin authored
The function only tests for page->index, so its argument should be const. Signed-off-by:
-
Brian Vazquez authored
This commit fixes the errores reported when building for powerpc: ERROR: modpost: "ip6_dst_check" [vmlinux] is a static EXPORT_SYMBOL ERROR: modpost: "ipv4_dst_check" [vmlinux] is a static EXPORT_SYMBOL ERROR: modpost: "ipv4_mtu" [vmlinux] is a static EXPORT_SYMBOL ERROR: modpost: "ip6_mtu" [vmlinux] is a static EXPORT_SYMBOL Fixes: f67fbeae ("net: use indirect call helpers for dst_mtu") Fixes: bbd807df ("net: indirect call helpers for ipv4/ipv6 dst_check functions") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Brian Vazquez <brianvv@google.com> Link: https://lore.kernel.org/r/20210204181839.558951-2-brianvv@google.comSigned-off-by:
-
Brian Vazquez authored
When a static function is annotated with INDIRECT_CALLABLE_SCOPE and CONFIG_RETPOLINE is set, the static keyword is removed. Sometimes the function needs to be exported but EXPORT_SYMBOL can't be used because if CONFIG_RETPOLINE is not set, we will attempt to export a static symbol. This patch introduces a new indirect call wrapper: EXPORT_INDIRECT_CALLABLE. This basically does EXPORT_SYMBOL when CONFIG_RETPOLINE is set, but does nothing when it's not. Reported-by:
-
Marcelo Ricardo Leitner authored
Often userspace won't request the extack information, or they don't log it because of log level or so, and even when they do, sometimes it's not enough to know exactly what caused the error. Netlink extack is the standard way of reporting erros with descriptive error messages. With a trace point on it, we then can know exactly where the error happened, regardless of userspace app. Also, we can even see if the err msg was overwritten. The wrapper do_trace_netlink_extack() is because trace points shouldn't be called from .h files, as trace points are not that small, and the function call to do_trace_netlink_extack() on the macros is not protected by tracepoint_enabled() because the macros are called from modules, and this would require exporting some trace structs. As this is error path, it's better to export just the wrapper instead. v2: removed leftover tracepoint declaration Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/4546b63e67b2989789d146498b13cc09e1fdc543.1612403190.git.marcelo.leitner@gmail.comSigned-off-by:
-
- 04 Feb, 2021 20 commits
-
-
Jiapeng Chong authored
Fix the following coccicheck warnings: ./drivers/net/xen-netfront.c:1816:52-54: WARNING !A || A && B is equivalent to !A || B. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/1612261069-13315-1-git-send-email-jiapeng.chong@linux.alibaba.comSigned-off-by:
-
Jakub Kicinski authored
Jonas Bonn says: ==================== There's ongoing work in this driver to provide support for IPv6, GRO, GSO, and "collect metadata" mode operation. In order to facilitate this work going forward, this short series accumulates already ACK:ed patches that are ready for the next merge window. All of these patches should be uncontroversial at this point, including the first one in the series that reverts a recently added change to introduce "collect metadata" mode. As that patch produces 'broken' packets when common GTP headers are in place, it seems better to revert it and rethink things a bit before inclusion. ==================== Link: https://lore.kernel.org/r/20210203070805.281321-1-jonas@norrbonn.seSigned-off-by:
-
Jonas Bonn authored
Based on work by Pravin Shelar. Update appropriate stats when packet transmission isn't possible. Signed-off-by:
Jonas Bonn <jonas@norrbonn.se> Acked-by:
Harald Welte <laforge@gnumonks.org> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Jonas Bonn authored
Set the devtype to 'gtp' when setting up the link. Signed-off-by:
-
Jonas Bonn authored
The call to skb_dst_drop() is already done as part of udp_tunnel_xmit(). Signed-off-by:
-
Jonas Bonn authored
Blindly assuming that packet transmission crosses namespaces results in skb marks being lost in the single namespace case. Signed-off-by:
-
Jonas Bonn authored
Querying link info for the GTP interface doesn't reveal in which "role" the device is set to operate. Include this information in the info query result. Signed-off-by:
-
Jonas Bonn authored
The GTP link is brought up with a default MTU of zero. This can lead to some rather unexpected behaviour for users who are more accustomed to interfaces coming online with reasonable defaults. This patch sets an initial MTU for the GTP link of 1500 less worst-case tunnel overhead. Signed-off-by:
-
Jonas Bonn authored
This reverts commit 9ab7e76a. This patch was committed without maintainer approval and despite a number of unaddressed concerns from review. There are several issues that impede the acceptance of this patch and that make a reversion of this particular instance of these changes the best way forward: i) the patch contains several logically separate changes that would be better served as smaller patches (for review purposes) ii) functionality like the handling of end markers has been introduced without further explanation iii) symmetry between the handling of GTPv0 and GTPv1 has been unnecessarily broken iv) the patchset produces 'broken' packets when extension headers are included v) there are no available userspace tools to allow for testing this functionality vi) there is an unaddressed Coverity report against the patch concering memory leakage vii) most importantly, the patch contains a large amount of superfluous churn that impedes other ongoing work with this driver This patch will be reworked into a series that aligns with other ongoing work and facilitates review. Signed-off-by:
-
Hariharan Ananthakrishnan authored
Similar to sock:inet_sock_set_state tracepoint, expose sk_family to distinguish AF_INET and AF_INET6 families. The following tcp tracepoints are updated: tcp:tcp_destroy_sock tcp:tcp_rcv_space_adjust tcp:tcp_retransmit_skb tcp:tcp_send_reset tcp:tcp_receive_reset tcp:tcp_retransmit_synack tcp:tcp_probe Signed-off-by:
Hariharan Ananthakrishnan <hari@netflix.com> Signed-off-by:
Brendan Gregg <bgregg@netflix.com> Link: https://lore.kernel.org/r/20210129001210.344438-1-hari@netflix.comSigned-off-by:
-
Wei Wang authored
Currently, a percpu_counter with the default batch size (2*nr_cpus) is used to record the total # of active sockets per protocol. This means sk_sockets_allocated_read_positive() could be off by +/-2*(nr_cpus^2). This under/over-estimation could lead to wrong memory suppression conditions in __sk_raise_mem_allocated(). Fix this by using a more reasonable fixed batch size of 16. See related commit cf86a086 ("net/dst: use a smaller percpu_counter batch for dst entries accounting") that addresses a similar issue. Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Soheil Hassas Yeganeh <soheil@google.com> Link: https://lore.kernel.org/r/20210202193408.1171634-1-weiwan@google.comSigned-off-by:
-
Jakub Kicinski authored
Danielle Ratson says: ==================== Support setting lanes via ethtool Some speeds can be achieved with different number of lanes. For example, 100Gbps can be achieved using two lanes of 50Gbps or four lanes of 25Gbps. This patchset adds a new selector that allows ethtool to advertise link modes according to their number of lanes and also force a specific number of lanes when autonegotiation is off. Advertising all link modes with a speed of 100Gbps that use two lanes: $ ethtool -s swp1 speed 100000 lanes 2 autoneg on Forcing a speed of 100Gbps using four lanes: $ ethtool -s swp1 speed 100000 lanes 4 autoneg off ==================== Link: https://lore.kernel.org/r/20210202180612.325099-1-danieller@nvidia.comSigned-off-by:
-
Danielle Ratson authored
Test that setting lanes parameter is working. Set max speed and max lanes in the list of advertised link modes, and then try to set max speed with the lanes below max lanes if exists in the list. And then, test that setting number of lanes larger than max lanes fails. Do the above for both autoneg on and off. $ ./ethtool_lanes.sh TEST: 4 lanes is autonegotiated [ OK ] TEST: Lanes number larger than max width is not set [ OK ] TEST: Autoneg off, 4 lanes detected during force mode [ OK ] TEST: Lanes number larger than max width is not set [ OK ] Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Signed-off-by:
-
Danielle Ratson authored
Currently, when user space queries the link's parameters, as speed and duplex, each parameter is passed from the driver to ethtool. Instead, pass the link mode bit in use. In Spectrum-1, simply pass the bit that is set to '1' from PTYS register. In Spectrum-2, pass the first link mode bit in the mask of the used link mode. Signed-off-by:
-
Danielle Ratson authored
Currently, when auto negotiation is set to off, the user can force a specific speed or both speed and duplex. The user cannot influence the number of lanes that will be forced. Add support for setting speed along with lanes so one would be able to choose how many lanes will be forced. When lanes parameter is passed from user space, choose the link mode that its actual width equals to it. Otherwise, the default link mode will be the one that supports the width of the port. Signed-off-by:
-
Danielle Ratson authored
Currently, when a speed can be supported by different number of lanes, the supported link modes bitmask contains only link modes with a single number of lanes. This was done in order to prevent auto negotiation on number of lanes after 50G-1-lane and 100G-2-lanes link modes were introduced. For example, if a port's max width is 4, only link modes with 4 lanes will be presented as supported by that port, so 100G is always achieved by 4 lanes of 25G. After the previous patches that allow selection of the number of lanes, auto negotiation on number of lanes becomes practical. Remove that filtering of the maximum number of lanes supported link modes, so indeed all the supported and advertised link modes will be shown. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Danielle Ratson authored
Currently, ethtool does not expose how many lanes are used when the link is up. After adding a possibility to advertise or force a specific number of lanes, the lanes in use value can be either the maximum width of the port or below. Extend ethtool to expose the number of lanes currently in use for drivers that support it. For example: $ ethtool -s swp1 speed 100000 lanes 4 $ ethtool -s swp2 speed 100000 lanes 4 $ ip link set swp1 up $ ip link set swp2 up $ ethtool swp1 Settings for swp1: Supported ports: [ FIBRE Backplane ] Supported link modes: 1000baseT/Full 10000baseT/Full 1000baseKX/Full 10000baseKR/Full 10000baseR_FEC 40000baseKR4/Full 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 25000baseCR/Full 25000baseKR/Full 25000baseSR/Full 50000baseCR2/Full 50000baseKR2/Full 100000baseKR4/Full 100000baseSR4/Full 100000baseCR4/Full 100000baseLR4_ER4/Full 50000baseSR2/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full 10000baseER/Full 50000baseKR/Full 50000baseSR/Full 50000baseCR/Full 50000baseLR_ER_FR/Full 50000baseDR/Full 100000baseKR2/Full 100000baseSR2/Full 100000baseCR2/Full 100000baseLR2_ER2_FR2/Full 100000baseDR2/Full 200000baseKR4/Full 200000baseSR4/Full 200000baseLR4_ER4_FR4/Full 200000baseDR4/Full 200000baseCR4/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 1000baseT/Full 10000baseT/Full 1000baseKX/Full 1000baseKX/Full 10000baseKR/Full 10000baseR_FEC 40000baseKR4/Full 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 25000baseCR/Full 25000baseKR/Full 25000baseSR/Full 50000baseCR2/Full 50000baseKR2/Full 100000baseKR4/Full 100000baseSR4/Full 100000baseCR4/Full 100000baseLR4_ER4/Full 50000baseSR2/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full 10000baseER/Full 200000baseKR4/Full 200000baseSR4/Full 200000baseLR4_ER4_FR4/Full 200000baseDR4/Full 200000baseCR4/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Advertised link modes: 100000baseKR4/Full 100000baseSR4/Full 100000baseCR4/Full 100000baseLR4_ER4/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: 100000Mb/s Lanes: 4 Duplex: Full Auto-negotiation: on Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Link detected: yes Signed-off-by: -
Danielle Ratson authored
Currently, when user space queries the link's parameters, as speed and duplex, each parameter is passed from the driver to ethtool. Instead, get the link mode bit in use, and derive each of the parameters from it in ethtool. Signed-off-by:
-
Danielle Ratson authored
Currently, when auto negotiation is on, the user can advertise all the linkmodes which correspond to a specific speed, but does not have a similar selector for the number of lanes. This is significant when a specific speed can be achieved using different number of lanes. For example, 2x50 or 4x25. Add 'ETHTOOL_A_LINKMODES_LANES' attribute and expand 'struct ethtool_link_settings' with lanes field in order to implement a new lanes-selector that will enable the user to advertise a specific number of lanes as well. When auto negotiation is off, lanes parameter can be forced only if the driver supports it. Add a capability bit in 'struct ethtool_ops' that allows ethtool know if the driver can handle the lanes parameter when auto negotiation is off, so if it does not, an error message will be returned when trying to set lanes. Example: $ ethtool -s swp1 lanes 4 $ ethtool swp1 Settings for swp1: Supported ports: [ FIBRE ] Supported link modes: 1000baseKX/Full 10000baseKR/Full 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 25000baseCR/Full 25000baseSR/Full 50000baseCR2/Full 100000baseSR4/Full 100000baseCR4/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 100000baseSR4/Full 100000baseCR4/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: Unknown! Duplex: Unknown! (255) Auto-negotiation: on Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Link detected: no Signed-off-by: -
Danielle Ratson authored
Create a new function for input validations to be called before rtnl_lock() and move the master slave validation to that function. This would be a cleanup for next patch that would add another validation to the new function. Signed-off-by:
-
