- 03 Feb, 2018 6 commits
-
-
Linus Walleij authored
commit 24bd3efc upstream. The GPIO event descriptor was leaking kernel stack to userspace because we don't zero the variable before use. Ooops. Fix this. Reported-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Patrice Chotard authored
commit b888fb6f upstream. Move the workaround from stmpe_gpio_irq_unmask() which is executed in atomic context to stmpe_gpio_irq_sync_unlock() which is not. It fixes the following issue: [ 1.500000] BUG: scheduling while atomic: swapper/1/0x00000002 [ 1.500000] CPU: 0 PID: 1 Comm: swapper Not tainted 4.15.0-rc2-00020-gbd4301f-dirty #28 [ 1.520000] Hardware name: STM32 (Device Tree Support) [ 1.520000] [<0000bfc9>] (unwind_backtrace) from [<0000b347>] (show_stack+0xb/0xc) [ 1.530000] [<0000b347>] (show_stack) from [<0001fc49>] (__schedule_bug+0x39/0x58) [ 1.530000] [<0001fc49>] (__schedule_bug) from [<00168211>] (__schedule+0x23/0x2b2) [ 1.550000] [<00168211>] (__schedule) from [<001684f7>] (schedule+0x57/0x64) [ 1.550000] [<001684f7>] (schedule) from [<0016a513>] (schedule_timeout+0x137/0x164) [ 1.550000] [<0016a513>] (schedule_timeout) from [<00168b91>] (wait_for_common+0x8d/0xfc) [ 1.570000] [<00168b91>] (wait_for_common) from [<00139753>] (stm32f4_i2c_xfer+0xe9/0xfe) [ 1.580000] [<00139753>] (stm32f4_i2c_xfer) from [<00138545>] (__i2c_transfer+0x111/0x148) [ 1.590000] [<00138545>] (__i2c_transfer) from [<001385cf>] (i2c_transfer+0x53/0x70) [ 1.590000] [<001385cf>] (i2c_transfer) from [<001388a5>] (i2c_smbus_xfer+0x12f/0x36e) [ 1.600000] [<001388a5>] (i2c_smbus_xfer) from [<00138b49>] (i2c_smbus_read_byte_data+0x1f/0x2a) [ 1.610000] [<00138b49>] (i2c_smbus_read_byte_data) from [<00124fdd>] (__stmpe_reg_read+0xd/0x24) [ 1.620000] [<00124fdd>] (__stmpe_reg_read) from [<001252b3>] (stmpe_reg_read+0x19/0x24) [ 1.630000] [<001252b3>] (stmpe_reg_read) from [<0002c4d1>] (unmask_irq+0x17/0x22) [ 1.640000] [<0002c4d1>] (unmask_irq) from [<0002c57f>] (irq_startup+0x6f/0x78) [ 1.650000] [<0002c57f>] (irq_startup) from [<0002b7a1>] (__setup_irq+0x319/0x47c) [ 1.650000] [<0002b7a1>] (__setup_irq) from [<0002bad3>] (request_threaded_irq+0x6b/0xe8) [ 1.660000] [<0002bad3>] (request_threaded_irq) from [<0002d0b9>] (devm_request_threaded_irq+0x3b/0x6a) [ 1.670000] [<0002d0b9>] (devm_request_threaded_irq) from [<001446e7>] (mmc_gpiod_request_cd_irq+0x49/0x8a) [ 1.680000] [<001446e7>] (mmc_gpiod_request_cd_irq) from [<0013d45d>] (mmc_start_host+0x49/0x60) [ 1.690000] [<0013d45d>] (mmc_start_host) from [<0013e40b>] (mmc_add_host+0x3b/0x54) [ 1.700000] [<0013e40b>] (mmc_add_host) from [<00148119>] (mmci_probe+0x4d1/0x60c) [ 1.710000] [<00148119>] (mmci_probe) from [<000f903b>] (amba_probe+0x7b/0xbe) [ 1.720000] [<000f903b>] (amba_probe) from [<001170e5>] (driver_probe_device+0x169/0x1f8) [ 1.730000] [<001170e5>] (driver_probe_device) from [<001171b7>] (__driver_attach+0x43/0x5c) [ 1.740000] [<001171b7>] (__driver_attach) from [<0011618d>] (bus_for_each_dev+0x3d/0x46) [ 1.740000] [<0011618d>] (bus_for_each_dev) from [<001165cd>] (bus_add_driver+0xcd/0x124) [ 1.740000] [<001165cd>] (bus_add_driver) from [<00117713>] (driver_register+0x4d/0x7a) [ 1.760000] [<00117713>] (driver_register) from [<001fc765>] (do_one_initcall+0xbd/0xe8) [ 1.770000] [<001fc765>] (do_one_initcall) from [<001fc88b>] (kernel_init_freeable+0xfb/0x134) [ 1.780000] [<001fc88b>] (kernel_init_freeable) from [<00167ee3>] (kernel_init+0x7/0x9c) [ 1.790000] [<00167ee3>] (kernel_init) from [<00009b65>] (ret_from_fork+0x11/0x2c) Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
Patrice Chotard <patrice.chotard@st.com> Signed-off-by:
-
Joel Stanley authored
commit 1696784e upstream. The GPIO tools build fails when using a buildroot toolchain that uses musl as it's C library: arm-broomstick-linux-musleabi-gcc -Wp,-MD,./.gpio-event-mon.o.d \ -Wp,-MT,gpio-event-mon.o -O2 -Wall -g -D_GNU_SOURCE \ -Iinclude -D"BUILD_STR(s)=#s" -c -o gpio-event-mon.o gpio-event-mon.c gpio-event-mon.c:30:6: error: unknown type name ‘u_int32_t’; did you mean ‘uint32_t’? u_int32_t handleflags, ^~~~~~~~~ uint32_t The glibc headers installed on my laptop include sys/types.h in unistd.h, but it appears that musl does not. Fixes: 97f69747 ("tools/gpio: add the gpio-event-mon tool") Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Janakarajan Natarajan authored
commit 50a671d4 upstream. The function for CPUID 80000001 ECX is set to 0xc0000001. Set it to 0x80000001. Signed-off-by:
Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by:
Borislav Petkov <bp@suse.de> Fixes: d6321d49 ("KVM: x86: generalize guest_cpuid_has_ helpers") Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Linus Torvalds authored
commit ae665016 upstream. 范龙飞 reports that KASAN can report a use-after-free in __lock_acquire. The reason is due to insufficient serialization in lo_release(), which will continue to use the loop device even after it has decremented the lo_refcnt to zero. In the meantime, another process can come in, open the loop device again as it is being shut down. Confusion ensues. Reported-by:
范龙飞 <long7573@126.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Peter Zijlstra authored
commit a97cb0e7 upstream. Both Geert and DaveJ reported that the recent futex commit: c1e2f0ea ("futex: Avoid violating the 10th rule of futex") introduced a problem with setting OWNER_DEAD. We set the bit on an uninitialized variable and then entirely optimize it away as a dead-store. Move the setting of the bit to where it is more useful. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reported-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: c1e2f0ea ("futex: Avoid violating the 10th rule of futex") Link: http://lkml.kernel.org/r/20180122103947.GD2228@hirez.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by:
-
- 31 Jan, 2018 34 commits
-
-
Greg Kroah-Hartman authored
-
Ben Hutchings authored
commit 19952667 upstream. Commit bdcf0a42 ("kernel: make groups_sort calling a responsibility group_info allocators") appears to break nfsd rootsquash in a pretty major way. It adds a call to groups_sort() inside the loop that copies/squashes gids, which means the valid gids are sorted along with the following garbage. The net result is that the highest numbered valid gids are replaced with any lower-valued garbage gids, possibly including 0. We should sort only once, after filling in all the gids. Fixes: bdcf0a42 ("kernel: make groups_sort calling a responsibility ...") Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit 56026645 upstream. After commit aa7519af (cpufreq: Use transition_delay_us for legacy governors as well) the sampling_rate field of struct dbs_data may be less than the tick period which causes dbs_update() to produce incorrect results, so make the code ensure that the value of that field will always be sufficiently large. Fixes: aa7519af (cpufreq: Use transition_delay_us for legacy governors as well) Reported-by:
Andy Tang <andy.tang@nxp.com> Reported-by:
Doug Smythies <dsmythies@telus.net> Tested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Daniel Borkmann authored
[ upstream commit a2284d91 ] Using dynamic stack_depth tracking in arm64 JIT is currently broken in combination with tail calls. In prologue, we cache ctx->stack_size and adjust SP reg for setting up function call stack, and tearing it down again in epilogue. Problem is that when doing a tail call, the cached ctx->stack_size might not be the same. One way to fix the problem with minimal overhead is to re-adjust SP in emit_bpf_tail_call() and properly adjust it to the current program's ctx->stack_size. Tested on Cavium ThunderX ARMv8. Fixes: f1c9eed7 ("bpf, arm64: take advantage of stack_depth tracking") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Daniel Borkmann authored
[ upstream commit f37a8cb8 ] Alexei found that verifier does not reject stores into context via BPF_ST instead of BPF_STX. And while looking at it, we also should not allow XADD variant of BPF_STX. The context rewriter is only assuming either BPF_LDX_MEM- or BPF_STX_MEM-type operations, thus reject anything other than that so that assumptions in the rewriter properly hold. Add test cases as well for BPF selftests. Fixes: d691f9e8 ("bpf: allow programs to write to certain skb fields") Reported-by:
-
Alexei Starovoitov authored
[ upstream commit 68fda450 ] due to some JITs doing if (src_reg == 0) check in 64-bit mode for div/mod operations mask upper 32-bits of src register before doing the check Fixes: 62258278 ("net: filter: x86: internal BPF JIT") Fixes: 7a12b503 ("sparc64: Add eBPF JIT.") Reported-by: syzbot+48340bb518e88849e2e3@syzkaller.appspotmail.com Signed-off-by:
-
Eric Dumazet authored
[ upstream commit c366287e ] Divides by zero are not nice, lets avoid them if possible. Also do_div() seems not needed when dealing with 32bit operands, but this seems a minor detail. Fixes: bd4cf0ed ("net: filter: rework/optimize internal BPF interpreter's instruction set") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Daniel Borkmann authored
[ upstream commit be95a845 ] In addition to commit b2157399 ("bpf: prevent out-of-bounds speculation") also change the layout of struct bpf_map such that false sharing of fast-path members like max_entries is avoided when the maps reference counter is altered. Therefore enforce them to be placed into separate cachelines. pahole dump after change: struct bpf_map { const struct bpf_map_ops * ops; /* 0 8 */ struct bpf_map * inner_map_meta; /* 8 8 */ void * security; /* 16 8 */ enum bpf_map_type map_type; /* 24 4 */ u32 key_size; /* 28 4 */ u32 value_size; /* 32 4 */ u32 max_entries; /* 36 4 */ u32 map_flags; /* 40 4 */ u32 pages; /* 44 4 */ u32 id; /* 48 4 */ int numa_node; /* 52 4 */ bool unpriv_array; /* 56 1 */ /* XXX 7 bytes hole, try to pack */ /* --- cacheline 1 boundary (64 bytes) --- */ struct user_struct * user; /* 64 8 */ atomic_t refcnt; /* 72 4 */ atomic_t usercnt; /* 76 4 */ struct work_struct work; /* 80 32 */ char name[16]; /* 112 16 */ /* --- cacheline 2 boundary (128 bytes) --- */ /* size: 128, cachelines: 2, members: 17 */ /* sum members: 121, holes: 1, sum holes: 7 */ }; Now all entries in the first cacheline are read only throughout the life time of the map, set up once during map creation. Overall struct size and number of cachelines doesn't change from the reordering. struct bpf_map is usually first member and embedded in map structs in specific map implementations, so also avoid those members to sit at the end where it could potentially share the cacheline with first map values e.g. in the array since remote CPUs could trigger map updates just as well for those (easily dirtying members like max_entries intentionally as well) while having subsequent values in cache. Quoting from Google's Project Zero blog [1]: Additionally, at least on the Intel machine on which this was tested, bouncing modified cache lines between cores is slow, apparently because the MESI protocol is used for cache coherence [8]. Changing the reference counter of an eBPF array on one physical CPU core causes the cache line containing the reference counter to be bounced over to that CPU core, making reads of the reference counter on all other CPU cores slow until the changed reference counter has been written back to memory. Because the length and the reference counter of an eBPF array are stored in the same cache line, this also means that changing the reference counter on one physical CPU core causes reads of the eBPF array's length to be slow on other physical CPU cores (intentional false sharing). While this doesn't 'control' the out-of-bounds speculation through masking the index as in commit b2157399, triggering a manipulation of the map's reference counter is really trivial, so lets not allow to easily affect max_entries from it. Splitting to separate cachelines also generally makes sense from a performance perspective anyway in that fast-path won't have a cache miss if the map gets pinned, reused in other progs, etc out of control path, thus also avoids unintentional false sharing. [1] https://googleprojectzero.blogspot.ch/2018/01/reading-privileged-memory-with-side.htmlSigned-off-by:
-
Alexei Starovoitov authored
[ upstream commit 290af866 ] The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715. A quote from goolge project zero blog: "At this point, it would normally be necessary to locate gadgets in the host kernel code that can be used to actually leak data by reading from an attacker-controlled location, shifting and masking the result appropriately and then using the result of that as offset to an attacker-controlled address for a load. But piecing gadgets together and figuring out which ones work in a speculation context seems annoying. So instead, we decided to use the eBPF interpreter, which is built into the host kernel - while there is no legitimate way to invoke it from inside a VM, the presence of the code in the host kernel's text section is sufficient to make it usable for the attack, just like with ordinary ROP gadgets." To make attacker job harder introduce BPF_JIT_ALWAYS_ON config option that removes interpreter from the kernel in favor of JIT-only mode. So far eBPF JIT is supported by: x64, arm64, arm32, sparc64, s390, powerpc64, mips64 The start of JITed program is randomized and code page is marked as read-only. In addition "constant blinding" can be turned on with net.core.bpf_jit_harden v2->v3: - move __bpf_prog_ret0 under ifdef (Daniel) v1->v2: - fix init order, test_bpf and cBPF (Daniel's feedback) - fix offloaded bpf (Jakub's feedback) - add 'return 0' dummy in case something can invoke prog->bpf_func - retarget bpf tree. For bpf-next the patch would need one extra hunk. It will be sent when the trees are merged back to net-next Considered doing: int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT; but it seems better to land the patch as-is and in bpf-next remove bpf_jit_enable global variable from all JITs, consolidate in one place and remove this jit_init() function. Signed-off-by:
-
Thomas Gleixner authored
commit d5421ea4 upstream. The hrtimer interrupt code contains a hang detection and mitigation mechanism, which prevents that a long delayed hrtimer interrupt causes a continous retriggering of interrupts which prevent the system from making progress. If a hang is detected then the timer hardware is programmed with a certain delay into the future and a flag is set in the hrtimer cpu base which prevents newly enqueued timers from reprogramming the timer hardware prior to the chosen delay. The subsequent hrtimer interrupt after the delay clears the flag and resumes normal operation. If such a hang happens in the last hrtimer interrupt before a CPU is unplugged then the hang_detected flag is set and stays that way when the CPU is plugged in again. At that point the timer hardware is not armed and it cannot be armed because the hang_detected flag is still active, so nothing clears that flag. As a consequence the CPU does not receive hrtimer interrupts and no timers expire on that CPU which results in RCU stalls and other malfunctions. Clear the flag along with some other less critical members of the hrtimer cpu base to ensure starting from a clean state when a CPU is plugged in. Thanks to Paul, Sebastian and Anna-Maria for their help to get down to the root cause of that hard to reproduce heisenbug. Once understood it's trivial and certainly justifies a brown paperbag. Fixes: 41d2e494 ("hrtimer: Tune hrtimer_interrupt hang logic") Reported-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Sewior <bigeasy@linutronix.de> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801261447590.2067@nanosSigned-off-by:
-
Andy Lutomirski authored
commit 5beda7d5 upstream. Neil Berrington reported a double-fault on a VM with 768GB of RAM that uses large amounts of vmalloc space with PTI enabled. The cause is that load_new_mm_cr3() was never fixed to take the 5-level pgd folding code into account, so, on a 4-level kernel, the pgd synchronization logic compiles away to exactly nothing. Interestingly, the problem doesn't trigger with nopti. I assume this is because the kernel is mapped with global pages if we boot with nopti. The sequence of operations when we create a new task is that we first load its mm while still running on the old stack (which crashes if the old stack is unmapped in the new mm unless the TLB saves us), then we call prepare_switch_to(), and then we switch to the new stack. prepare_switch_to() pokes the new stack directly, which will populate the mapping through vmalloc_fault(). I assume that we're getting lucky on non-PTI systems -- the old stack's TLB entry stays alive long enough to make it all the way through prepare_switch_to() and switch_to() so that we make it to a valid stack. Fixes: b50858ce ("x86/mm/vmalloc: Add 5-level paging support") Reported-and-tested-by:
Neil Berrington <neil.berrington@datacore.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Borislav Petkov authored
commit 1d080f09 upstream. Commit 24c25032 ("x86/microcode: Do not access the initrd after it has been freed") fixed attempts to access initrd from the microcode loader after it has been freed. However, a similar KASAN warning was reported (stack trace edited): smpboot: Booting Node 0 Processor 1 APIC 0x11 ================================================================== BUG: KASAN: use-after-free in find_cpio_data+0x9b5/0xa50 Read of size 1 at addr ffff880035ffd000 by task swapper/1/0 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.8-slack #7 Hardware name: System manufacturer System Product Name/A88X-PLUS, BIOS 3003 03/10/2016 Call Trace: dump_stack print_address_description kasan_report ? find_cpio_data __asan_report_load1_noabort find_cpio_data find_microcode_in_initrd __load_ucode_amd load_ucode_amd_ap load_ucode_ap After some investigation, it turned out that a merge was done using the wrong side to resolve, leading to picking up the previous state, before the 24c25032 fix. Therefore the Fixes tag below contains a merge commit. Revert the mismerge by catching the save_microcode_in_initrd_amd() retval and thus letting the function exit with the last return statement so that initrd_gone can be set to true. Fixes: f26483ea ("Merge branch 'x86/urgent' into x86/microcode, to resolve conflicts") Reported-by: <higuita@gmx.net> Signed-off-by:
-
Jia Zhang authored
commit 7e702d17 upstream. Commit b94b7373 ("x86/microcode/intel: Extend BDW late-loading with a revision check") reduced the impact of erratum BDF90 for Broadwell model 79. The impact can be reduced further by checking the size of the last level cache portion per core. Tony: "The erratum says the problem only occurs on the large-cache SKUs. So we only need to avoid the update if we are on a big cache SKU that is also running old microcode." For more details, see erratum BDF90 in document #334165 (Intel Xeon Processor E7-8800/4800 v4 Product Family Specification Update) from September 2017. Fixes: b94b7373 ("x86/microcode/intel: Extend BDW late-loading with a revision check") Signed-off-by:
Jia Zhang <zhang.jia@linux.alibaba.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1516321542-31161-1-git-send-email-zhang.jia@linux.alibaba.comSigned-off-by:
-
Xiao Liang authored
commit 40d4071c upstream. The AMD power module can be loaded on non AMD platforms, but unload fails with the following Oops: BUG: unable to handle kernel NULL pointer dereference at (null) IP: __list_del_entry_valid+0x29/0x90 Call Trace: perf_pmu_unregister+0x25/0xf0 amd_power_pmu_exit+0x1c/0xd23 [power] SyS_delete_module+0x1a8/0x2b0 ? exit_to_usermode_loop+0x8f/0xb0 entry_SYSCALL_64_fastpath+0x20/0x83 Return -ENODEV instead of 0 from the module init function if the CPU does not match. Fixes: c7ab62bf ("perf/x86/amd/power: Add AMD accumulated power reporting mechanism") Signed-off-by:
Xiao Liang <xiliang@redhat.com> Signed-off-by:
-
Neil Horman authored
[ Upstream commit 848b1598 ] with the introduction of commit b0eb57cb, it appears that rq->buf_info is improperly handled. While it is heap allocated when an rx queue is setup, and freed when torn down, an old line of code in vmxnet3_rq_destroy was not properly removed, leading to rq->buf_info[0] being set to NULL prior to its being freed, causing a memory leak, which eventually exhausts the system on repeated create/destroy operations (for example, when the mtu of a vmxnet3 interface is changed frequently. Fix is pretty straight forward, just move the NULL set to after the free. Tested by myself with successful results Applies to net, and should likely be queued for stable, please Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-By: boyang@redhat.com CC: boyang@redhat.com CC: Shrikrishna Khare <skhare@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: David S. Miller <davem@davemloft.net> Acked-by:
Shrikrishna Khare <skhare@vmware.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Lorenzo Colitti authored
[ Upstream commit 6503a304 ] Commit 3765d35e ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup") broke "ip route get" in the presence of rules that specify iif lo. Host-originated traffic always has iif lo, because ip_route_output_key_hash and ip6_route_output_flags set the flow iif to LOOPBACK_IFINDEX. Thus, putting "iif lo" in an ip rule is a convenient way to select only originated traffic and not forwarded traffic. inet_rtm_getroute used to match these rules correctly because even though it sets the flow iif to 0, it called ip_route_output_key which overwrites iif with LOOPBACK_IFINDEX. But now that it calls ip_route_output_key_hash_rcu, the ifindex will remain 0 and not match the iif lo in the rule. As a result, "ip route get" will return ENETUNREACH. Fixes: 3765d35e ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup") Tested: https://android.googlesource.com/kernel/tests/+/master/net/test/multinetwork_test.py passes again Signed-off-by:
Lorenzo Colitti <lorenzo@google.com> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit 6db959c8 ] The current code copies directly from userspace to ctx->crypto_send, but doesn't always reinitialize it to 0 on failure. This causes any subsequent attempt to use this setsockopt to fail because of the TLS_CRYPTO_INFO_READY check, eventhough crypto_info is not actually ready. This should result in a correctly set up socket after the 3rd call, but currently it does not: size_t s = sizeof(struct tls12_crypto_info_aes_gcm_128); struct tls12_crypto_info_aes_gcm_128 crypto_good = { .info.version = TLS_1_2_VERSION, .info.cipher_type = TLS_CIPHER_AES_GCM_128, }; struct tls12_crypto_info_aes_gcm_128 crypto_bad_type = crypto_good; crypto_bad_type.info.cipher_type = 42; setsockopt(sock, SOL_TLS, TLS_TX, &crypto_bad_type, s); setsockopt(sock, SOL_TLS, TLS_TX, &crypto_good, s - 1); setsockopt(sock, SOL_TLS, TLS_TX, &crypto_good, s); Fixes: 3c4d7559 ("tls: kernel TLS support") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit 877d17c7 ] do_tls_setsockopt_tx returns 0 without doing anything when crypto_info is already set. Silent failure is confusing for users. Fixes: 3c4d7559 ("tls: kernel TLS support") Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit cf6d43ef ] During setsockopt(SOL_TCP, TLS_TX), if initialization of the software context fails in tls_set_sw_offload(), we leak sw_ctx. We also don't reassign ctx->priv_ctx to NULL, so we can't even do another attempt to set it up on the same socket, as it will fail with -EEXIST. Fixes: 3c4d7559 ('tls: kernel TLS support') Signed-off-by:
-
Ilya Lesokhin authored
[ Upstream commit d91c3e17 ] Calling accept on a TCP socket with a TLS ulp attached results in two sockets that share the same ulp context. The ulp context is freed while a socket is destroyed, so after one of the sockets is released, the second second will trigger a use after free when it tries to access the ulp context attached to it. We restrict the TLS ulp to sockets in ESTABLISHED state to prevent the scenario above. Fixes: 3c4d7559 ("tls: kernel TLS support") Reported-by: syzbot+904e7cd6c5c741609228@syzkaller.appspotmail.com Signed-off-by:
Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit cd443f1e ] Move up the extack reset/initialization in netlink_rcv_skb, so that those 'goto ack' will not skip it. Otherwise, later on netlink_ack may use the uninitialized extack and cause kernel crash. Fixes: cbbdf843 ("netlink: extack needs to be reset each time through loop") Reported-by: syzbot+03bee3680a37466775e7@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
-
Jakub Kicinski authored
[ Upstream commit 0d9c9f0f ] sts variable is holding link speed as well as state. We should be using ls to index into ls_to_ethtool. Fixes: 265aeb51 ("nfp: add support for .get_link_ksettings()") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Talat Batheesh authored
[ Upstream commit e58edaa4 ] Helmut reported a bug about division by zero while running traffic and doing physical cable pull test. When the cable unplugged the ppms become zero, so when dividing the current ppms by the previous ppms in the next dim iteration there is division by zero. This patch prevent this division for both ppms and epms. Fixes: c3164d2f ("net/mlx5e: Added BW check for DIM decision mechanism") Reported-by:
Helmut Grauer <helmut.grauer@de.ibm.com> Signed-off-by:
Talat Batheesh <talatb@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit cbbdf843 ] syzbot triggered the WARN_ON in netlink_ack testing the bad_attr value. The problem is that netlink_rcv_skb loops over the skb repeatedly invoking the callback and without resetting the extack leaving potentially stale data. Initializing each time through avoids the WARN_ON. Fixes: 2d4bc933 ("netlink: extended ACK reporting") Reported-by: syzbot+315fa6766d0f7c359327@syzkaller.appspotmail.com Signed-off-by:
-
Xin Long authored
[ Upstream commit 625637bf ] After introducing sctp_stream structure, sctp uses stream->outcnt as the out stream nums instead of c.sinit_num_ostreams. However when users use sinit in cmsg, it only updates c.sinit_num_ostreams in sctp_sendmsg. At that moment, stream->outcnt is still using previous value. If it's value is not updated, the sinit_num_ostreams of sinit could not really work. This patch is to fix it by updating stream->outcnt and reiniting stream if stream outcnt has been change by sinit in sendmsg. Fixes: a8386317 ("sctp: prepare asoc stream for stream reconf") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d0c081b4 ] syzbot reported yet another crash [1] that is caused by insufficient validation of DODGY packets. Two bugs are happening here to trigger the crash. 1) Flow dissection leaves with incorrect thoff field. 2) skb_probe_transport_header() sets transport header to this invalid thoff, even if pointing after skb valid data. 3) qdisc_pkt_len_init() reads out-of-bound data because it trusts tcp_hdrlen(skb) Possible fixes : - Full flow dissector validation before injecting bad DODGY packets in the stack. This approach was attempted here : https://patchwork.ozlabs.org/patch/ 861874/ - Have more robust functions in the core. This might be needed anyway for stable versions. This patch fixes the flow dissection issue. [1] CPU: 1 PID: 3144 Comm: syzkaller271204 Not tainted 4.15.0-rc4-mm1+ #49 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:355 [inline] kasan_report+0x23b/0x360 mm/kasan/report.c:413 __asan_report_load2_noabort+0x14/0x20 mm/kasan/report.c:432 __tcp_hdrlen include/linux/tcp.h:35 [inline] tcp_hdrlen include/linux/tcp.h:40 [inline] qdisc_pkt_len_init net/core/dev.c:3160 [inline] __dev_queue_xmit+0x20d3/0x2200 net/core/dev.c:3465 dev_queue_xmit+0x17/0x20 net/core/dev.c:3554 packet_snd net/packet/af_packet.c:2943 [inline] packet_sendmsg+0x3ad5/0x60a0 net/packet/af_packet.c:2968 sock_sendmsg_nosec net/socket.c:628 [inline] sock_sendmsg+0xca/0x110 net/socket.c:638 sock_write_iter+0x31a/0x5d0 net/socket.c:907 call_write_iter include/linux/fs.h:1776 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x684/0x970 fs/read_write.c:482 vfs_write+0x189/0x510 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0xef/0x220 fs/read_write.c:581 entry_SYSCALL_64_fastpath+0x1f/0x96 Fixes: 34fad54c ("net: __skb_flow_dissect() must cap its return value") Fixes: a6e544b0 ("flow_dissector: Jump to exit code in __skb_flow_dissect") Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 4df0bfc7 ] tfile->tun could be detached before we close the tun fd, via tun_detach_all(), so it should not be used to check for tfile->tx_array. As Jason suggested, we probably have to clean it up unconditionally both in __tun_deatch() and tun_detach_all(), but this requires to check if it is initialized or not. Currently skb_array_cleanup() doesn't have such a check, so I check it in the caller and introduce a helper function, it is a bit ugly but we can always improve it in net-next. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Fixes: 1576d986 ("tun: switch to use skb array for tx") Cc: Jason Wang <jasowang@redhat.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Yuval Mintz authored
[ Upstream commit 1ecdaea0 ] Driver periodically samples all neighbors configured in device in order to update the kernel regarding their state. When finding an entry configured in HW that doesn't show in neigh_lookup() driver logs an error message. This introduces a race when removing multiple neighbors - it's possible that a given entry would still be configured in HW as its removal is still being processed but is already removed from the kernel's neighbor tables. Simply remove the error message and gracefully accept such events. Fixes: c723c735 ("mlxsw: spectrum_router: Periodically update the kernel's neigh table") Fixes: 60f040ca ("mlxsw: spectrum_router: Periodically dump active IPv6 neighbours") Signed-off-by:
Yuval Mintz <yuvalm@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 121d57af ] Validate gso_type during segmentation as SKB_GSO_DODGY sources may pass packets where the gso_type does not match the contents. Syzkaller was able to enter the SCTP gso handler with a packet of gso_type SKB_GSO_TCPV4. On entry of transport layer gso handlers, verify that the gso_type matches the transport protocol. Fixes: 90017acc ("sctp: Add GSO support") Link: http://lkml.kernel.org/r/<001a1137452496ffc305617e5fe0@google.com> Reported-by: syzbot+fee64147a25aecd48055@syzkaller.appspotmail.com Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
-
Alexey Kodanev authored
[ Upstream commit 128bb975 ] Commit b05229f4 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") moved dev->mtu initialization from ip6gre_tunnel_setup() to ip6gre_tunnel_init(), as a result, the previously set values, before ndo_init(), are reset in the following cases: * rtnl_create_link() can update dev->mtu from IFLA_MTU parameter. * ip6gre_tnl_link_config() is invoked before ndo_init() in netlink and ioctl setup, so ndo_init() can reset MTU adjustments with the lower device MTU as well, dev->mtu and dev->hard_header_len. Not applicable for ip6gretap because it has one more call to ip6gre_tnl_link_config(tunnel, 1) in ip6gre_tap_init(). Fix the first case by updating dev->mtu with 'tb[IFLA_MTU]' parameter if a user sets it manually on a device creation, and fix the second one by moving ip6gre_tnl_link_config() call after register_netdevice(). Fixes: b05229f4 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") Fixes: db2ec95d ("ip6_gre: Fix MTU setting") Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by:
-
Ivan Vecera authored
[ Upstream commit 52acf064 ] The commit 62219066 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") modified be_update_queues() so the IFACE (HW representation of the netdevice) is destroyed and then re-created. This causes a regression because potential promiscuous mode is not restored properly during be_open() because the driver thinks that the HW has promiscuous mode already enabled. Note that Lancer is not affected by this bug because RX-filter flags are disabled during be_close() for this chipset. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: 62219066 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 0171c418 ] ppp_dev_uninit(), which is the .ndo_uninit() handler of PPP devices, needs to lock pn->all_ppp_mutex. Therefore we mustn't call register_netdevice() with pn->all_ppp_mutex already locked, or we'd deadlock in case register_netdevice() fails and calls .ndo_uninit(). Fortunately, we can unlock pn->all_ppp_mutex before calling register_netdevice(). This lock protects pn->units_idr, which isn't used in the device registration process. However, keeping pn->all_ppp_mutex locked during device registration did ensure that no device in transient state would be published in pn->units_idr. In practice, unlocking it before calling register_netdevice() doesn't change this property: ppp_unit_register() is called with 'ppp_mutex' locked and all searches done in pn->units_idr hold this lock too. Fixes: 8cb775bc ("ppp: fix device unregistration upon netns deletion") Reported-and-tested-by: syzbot+367889b9c9e279219175@syzkaller.appspotmail.com Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Saeed Mahameed authored
[ Upstream commit 05e0cc84 ] mlx5_get_vector_affinity used to call pci_irq_get_affinity and after reverting the patch that sets the device affinity via PCI_IRQ_AFFINITY API, calling pci_irq_get_affinity becomes useless and it breaks RDMA mlx5 users. To fix this, this patch provides an alternative way to retrieve IRQ vector affinity using legacy IRQ API, following smp_affinity read procfs implementation. Fixes: 231243c8 ("Revert mlx5: move affinity hints assignments to generic code") Fixes: a435393a ("mlx5: move affinity hints assignments to generic code") Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Eran Ben Elisha authored
[ Upstream commit 8978cc92 ] There are systems platform information management interfaces (such as HOST2BMC) for which we cannot disable local loopback multicast traffic. Separate disable_local_lb_mc and disable_local_lb_uc capability bits so driver will not disable multicast loopback traffic if not supported. (It is expected that Firmware will not set disable_local_lb_mc if HOST2BMC is running for example.) Function mlx5_nic_vport_update_local_lb will do best effort to disable/enable UC/MC loopback traffic and return success only in case it succeeded to changed all allowed by Firmware. Adapt mlx5_ib and mlx5e to support the new cap bits. Fixes: 2c43c5a0 ("net/mlx5e: Enable local loopback in loopback selftest") Fixes: c85023e1 ("IB/mlx5: Add raw ethernet local loopback support") Fixes: bded747b ("net/mlx5: Add raw ethernet local loopback firmware command") Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Cc: kernel-team@fb.com Signed-off-by:
-
