1. 09 May, 2013 34 commits
    • Doug Anderson's avatar
      ARM: exynos: dts: Fixed vbus-gpios · c58c1a4c
      Doug Anderson authored
      The 'samsung,vbus-gpio' was submitted before pinmux landed for
      exynos5250 and uses the old-style gpio specifier.  Fix the two
      exynos5250 boards that use it.
      Signed-off-by: default avatarDoug Anderson <dianders@chromium.org>
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      c58c1a4c
    • Inderpal Singh's avatar
      ARM: EXYNOS5: Fix kernel dump in AFTR idle mode · 08858461
      Inderpal Singh authored
      The kernel crashes while resuming from AFTR idle mode. It happens
      because L2 cache was not going into retention state.
      
      This patch configures the USE_RETENTION bit of ARM_L2_OPTION register
      so that it does not depend on MANUAL_L2RSTDISABLE_CONTROL of
      ARM_COMMON_OPTION register for L2RSTDISABLE signal.
      Signed-off-by: default avatarInderpal Singh <inderpal.singh@linaro.org>
      Tested-by: default avatarChander Kashyap <chander.kashyap@linaro.org>
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      08858461
    • Olof Johansson's avatar
      Merge tag 'omap-for-v3.10/dt-fixes-for-merge-window' of... · 6e6a3af7
      Olof Johansson authored
      Merge tag 'omap-for-v3.10/dt-fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
      
      From Tony Lindgren:
      Omap device tree fixes for issue discovered during the merge window:
      
      - Fix triggering for GPIO interrupts that's needed for 4430sdp
        Ethernet. Otherwise booting with nfsroot won't work.
      - Fix CPU operating point values
      - Fix wrong assumption that twl PMIC is always connected to omap3
      - Add gpmc for am33xx so beaglebone users can use the bus
      - Cosmetic fix for mcspi pin muxing to avoid confusion
      
      * tag 'omap-for-v3.10/dt-fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
        ARM: dts: don't assume boards are using twl4030 for omap3
        ARM: dts: Configure and fix the McSPI pins for 4430sdp
        ARM: dts: AM33XX: Add GPMC node
        ARM: dts: OMAP4460: Fix CPU OPP voltages
        ARM: dts: OMAP36xx: Fix CPU OPP voltages
        ARM: dts: OMAP4: Fix ethernet IRQ for OMAP4 boards
      6e6a3af7
    • Olof Johansson's avatar
      Merge tag 'omap-for-v3.10/fixes-for-merge-window-part2' of... · 474dbaa7
      Olof Johansson authored
      Merge tag 'omap-for-v3.10/fixes-for-merge-window-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
      
      From Tony Lindgren:
      Omap fixes for things that were discovered during the merge window:
      
      - Few GPMC fixes and binding doc updates noted after sending
        pull requests for the GPMC branch.
      - Board fixes for beagle usb host and rx51 spi probe order
      - SoC fixes dt earlyprintk, omap1 dma and omap2+ id.c error
        handling fixes
      
      Then few minor things that are not strictly fixes but are good
      to get out of the way:
      
      - Add missing legacy mux registers for am/dm73x gpio
      - Add detection for am33xx pg2.1 silicon
      - Enable twl4030 audio modules in defconfig
      
      * tag 'omap-for-v3.10/fixes-for-merge-window-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
        ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c
        ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module
        ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si
        omap: mux: add AM/DM37x gpios
        ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()
        ARM: OMAP2+: omap_device: use late_initcall_sync
        ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices
        ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
        ARM: OMAP2+: only WARN if a GPMC child probe function fail
        ARM: OMAP2+: only search for GPMC DT child nodes on probe
        Documentation: dt: update properties in TI GPMC NAND example
        Documentation: dt: update TI GPMC ethernet binding properties
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      474dbaa7
    • Lee Jones's avatar
      ARM: ux500: Rid ignored return value of regulator_enable() compiler warning · 27d4cdca
      Lee Jones authored
      arch/arm/mach-ux500/board-mop500.c: In function ‘mop500_prox_activate’:
      arch/arm/mach-ux500/board-mop500.c:406:18: warning: ignoring return value of
              ‘regulator_enable’, declared with attribute warn_unused_result
              [-Wunused-result]
      Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      27d4cdca
    • Fabio Baltieri's avatar
      ARM: ux500: read the correct soc_id number · 33c8abce
      Fabio Baltieri authored
      Fix db8500_read_soc_id() to read all five soc_id number locations
      instead of repeating the second one two times.
      Signed-off-by: default avatarFabio Baltieri <fabio.baltieri@linaro.org>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      33c8abce
    • Olof Johansson's avatar
      ARM: exynos: dts: cros5250: add cyapa trackpad · ee99ce89
      Olof Johansson authored
      Trivial patch, adding the i2c Cypress trackpad used on Snow.
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      Reviewed-by: default avatarDoug Anderson <dianders@chromium.org>
      Acked-by: default avatarKukjin Kim <kgene.kim@samsung.com>
      ee99ce89
    • Fabio Estevam's avatar
      video: mxsfb: Adapt to new videomode API · d7321df3
      Fabio Estevam authored
      commit 6cd2c7db (videomode: videomode_from_timing work) changed the name of
      the function from videomode_from_timing() to videomode_from_timings().
      
      commit 32ed6ef1 (videomode: create enum for videomode's display flags) changed
      the 'data_flags' field in videomode structure to 'flags'
      
      Adapt to these changes in order to fix the following errors:
      
      drivers/video/mxsfb.c:761:3: error: too many arguments to function 'videomode_from_timing'
      drivers/video/mxsfb.c:761:7: error: void value not ignored as it ought to be
      drivers/video/mxsfb.c:768:9: error: 'struct videomode' has no member named 'data_flags'
      drivers/video/mxsfb.c:770:9: error: 'struct videomode' has no member named 'data_flags'
      
      Also, select VIDEOMODE_HELPER instead of OF_VIDEOMODE, as this one is
      deprecated.
      Signed-off-by: default avatarFabio Estevam <fabio.estevam@freescale.com>
      Acked-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
      Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      d7321df3
    • Fabio Estevam's avatar
      ARM: imx: Select GENERIC_ALLOCATOR · 60371952
      Fabio Estevam authored
      Since commit 657eee7d (media: coda: use genalloc API) the following build
      error happens with imx_v4_v5_defconfig:
      
      drivers/built-in.o: In function 'coda_remove':
      clk-composite.c:(.text+0x112180): undefined reference to 'gen_pool_free'
      drivers/built-in.o: In function 'coda_probe':
      clk-composite.c:(.text+0x112310): undefined reference to 'of_get_named_gen_pool'
      clk-composite.c:(.text+0x1123f4): undefined reference to 'gen_pool_alloc'
      clk-composite.c:(.text+0x11240c): undefined reference to 'gen_pool_virt_to_phys'
      clk-composite.c:(.text+0x112458): undefined reference to 'dev_get_gen_pool'
      
      Select GENERIC_ALLOCATOR and get rid of the custom IRAM_ALLOC.
      Signed-off-by: default avatarFabio Estevam <fabio.estevam@freescale.com>
      Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      60371952
    • Shawn Guo's avatar
      ARM: imx: compile fix for hotplug.c · 009e63f8
      Shawn Guo authored
      Commit bca7a5a0 (ARM: cpu hotplug: remove majority of cache flushing
      from platforms) removes include of <asm/cacheflush.h> and hence
      discovers a few indirect inclusion and declaration problems as below.
      
        CC      arch/arm/mach-imx/hotplug.o
      In file included from arch/arm/mach-imx/hotplug.c:16:0:
      arch/arm/mach-imx/common.h:100:29: warning: ‘struct pt_regs’ declared inside parameter list [enabled by default]
      arch/arm/mach-imx/common.h:100:29: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
      arch/arm/mach-imx/common.h:101:29: warning: ‘struct pt_regs’ declared inside parameter list [enabled by default]
      arch/arm/mach-imx/hotplug.c: In function ‘imx_cpu_die’:
      arch/arm/mach-imx/hotplug.c:53:2: error: implicit declaration of function ‘cpu_do_idle’ [-Werror=implicit-function-declaration]
      arch/arm/mach-imx/hotplug.c: In function ‘imx_cpu_kill’:
      arch/arm/mach-imx/hotplug.c:58:26: error: ‘jiffies’ undeclared (first use in this function)
      arch/arm/mach-imx/hotplug.c:58:26: note: each undeclared identifier is reported only once for each function it appears in
      arch/arm/mach-imx/hotplug.c:58:2: error: implicit declaration of function ‘msecs_to_jiffies’ [-Werror=implicit-function-declaration]
      arch/arm/mach-imx/hotplug.c:61:3: error: implicit declaration of function ‘time_after’ [-Werror=implicit-function-declaration]
      
      Fix them by adding the needed inclusion and declaration.
      Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
      Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      009e63f8
    • Olof Johansson's avatar
      Merge branch 'late/fixes' into fixes · 5497e7b8
      Olof Johansson authored
      * late/fixes:
        ARM: OMAP2+: Fix unmet direct dependencies for SERIAL_OMAP
        ARM: ux500: always select ABX500_CORE
        ARM: SIRF: select SMP_ON_UP only on SMP builds
        ARM: SPEAr: conditionalize l2x0 support
        ARM: imx: build CPU suspend code only when needed
        ARM: OMAP: build SMP code only for OMAP4/5
        ARM: tegra: Tegra114 needs CPU_FREQ_TABLE
        ARM: default machine descriptor for multiplatform
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      5497e7b8
    • Linus Torvalds's avatar
      Merge tag 'nfs-for-3.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs · 8cbc95ee
      Linus Torvalds authored
      Pull more NFS client bugfixes from Trond Myklebust:
      
       - Ensure that we match the 'sec=' mount flavour against the server list
      
       - Fix the NFSv4 byte range locking in the presence of delegations
      
       - Ensure that we conform to the NFSv4.1 spec w.r.t.  freeing lock
         stateids
      
       - Fix a pNFS data server connection race
      
      * tag 'nfs-for-3.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
        NFS4.1 Fix data server connection race
        NFSv3: match sec= flavor against server list
        NFSv4.1: Ensure that we free the lock stateid on the server
        NFSv4: Convert nfs41_free_stateid to use an asynchronous RPC call
        SUNRPC: Don't spam syslog with "Pseudoflavor not found" messages
        NFSv4.x: Fix handling of partially delegated locks
      8cbc95ee
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · ea44083a
      Linus Torvalds authored
      Pull networking update from David Miller:
      
       1) Propagate return error values properly in irda, spider_net, sfc, and
          bfin_mac.  From Wei Yongjun.
      
       2) Fix fec driver OOPS on rapid link up/down, from Frank Li.
      
       3) FIX VF resource allocation and chip message payload length errors in
          be2net driver, from Sathya Perla.
      
       4) Fix inner protocol inspection during GSO from Pravin B Shelar.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
        if_cablemodem.h: Add parenthesis around ioctl macros
        gso: Handle Trans-Ether-Bridging protocol in skb_network_protocol()
        net: fec: fix kernel oops when plug/unplug cable many times
        bfin_mac: fix error return code in bfin_mac_probe()
        sfc: fix return value check in efx_ptp_probe_channel()
        net/spider_net: fix error return code in spider_net_open()
        net/irda: fix error return code in bfin_sir_open()
        net: of_mdio: fix behavior on missing phy device
        sierra_net: keep status interrupt URB active
        usbnet: allow status interrupt URB to always be active
        qmi_wwan/cdc_ether: add device IDs for Dell 5804 (Novatel E371) WWAN card
        be2net: disable TX in be_close()
        be2net: fix EQ from getting full while cleaning RX CQ
        be2net: fix payload_len value for GET_MAC_LIST cmd req
        be2net: provision VF resources before enabling SR-IOV
      ea44083a
    • Linus Torvalds's avatar
      Merge tag 'pci-v3.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci · e15e6119
      Linus Torvalds authored
      Pull PCI updates from Bjorn Helgaas:
       "MSI:
            PCI: Set ->mask_pos correctly
        Hotplug:
            PCI: Delay final fixups until resources are assigned
        Moorestown:
            x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0"
      
      * tag 'pci-v3.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
        PCI: Delay final fixups until resources are assigned
        x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0
        PCI: Set ->mask_pos correctly
      e15e6119
    • Linus Torvalds's avatar
      Merge tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd · a637b0d4
      Linus Torvalds authored
      Pull MTD update from David Woodhouse:
      
       - Lots of cleanups from Artem, including deletion of some obsolete
         drivers
      
       - Support partitions larger than 4GiB in device tree
      
       - Support for new SPI chips
      
      * tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd: (83 commits)
        mtd: omap2: Use module_platform_driver()
        mtd: bf5xx_nand: Use module_platform_driver()
        mtd: denali_dt: Remove redundant use of of_match_ptr
        mtd: denali_dt: Change return value to fix smatch warning
        mtd: denali_dt: Use module_platform_driver()
        mtd: denali_dt: Fix incorrect error check
        mtd: nand: subpage write support for hardware based ECC schemes
        mtd: omap2: use msecs_to_jiffies()
        mtd: nand_ids: use size macros
        mtd: nand_ids: improve LEGACY_ID_NAND macro a bit
        mtd: add 4 Toshiba nand chips for the full-id case
        mtd: add the support to parse out the full-id nand type
        mtd: add new fields to nand_flash_dev{}
        mtd: sh_flctl: Use of_match_ptr() macro
        mtd: gpio: Use of_match_ptr() macro
        mtd: gpio: Use devm_kzalloc()
        mtd: davinci_nand: Use of_match_ptr()
        mtd: dataflash: Use of_match_ptr() macro
        mtd: remove h720x flash support
        mtd: onenand: remove OneNAND simulator
        ...
      a637b0d4
    • Linus Torvalds's avatar
      Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 · f78089e8
      Linus Torvalds authored
      Pull firewure updates from Stefan Richter:
        - fix controller removal when controller is in suspended state
        - fix video reception on VIA VT6306 with gstreamer, MythTV, and maybe dv4l
        - fix a startup issue with Agere/LSI FW643-e2
        - error logging improvements and other small updates
      
      * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
        firewire: ohci: dump_stack() for PHY regs read/write failures
        firewire: ohci: Improve bus reset error messages
        firewire: ohci: Alias dev_* log functions
        firewire: ohci: Fix 'failed to read phy reg' on FW643 rev8
        firewire: ohci: fix VIA VT6306 video reception
        firewire: ohci: Check LPS before register access on pci removal
        firewire: ohci: Fix double free_irq()
        firewire: remove unnecessary alloc/OOM messages
        firewire: sbp2: replace BUG_ON by WARN_ON
        firewire: core: remove an always false test
        firewire: Remove two unneeded checks for macros
      f78089e8
    • Linus Torvalds's avatar
      Merge tag 'edac_fixes_for_3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp · 7462543a
      Linus Torvalds authored
      Pull two small EDAC fixes from Borislav Petkov.
      
      * tag 'edac_fixes_for_3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
        EDAC: Don't give write permission to read-only files
        EDAC, mc_sysfs.c: Fix string array pointer types
      7462543a
    • Linus Torvalds's avatar
      Merge git://www.linux-watchdog.org/linux-watchdog · bde9d73d
      Linus Torvalds authored
      Pull watchdog update from Wim Van Sebroeck:
       "Fix a kdump issue in hpwdt and a possible NULL dereference"
      
      * git://www.linux-watchdog.org/linux-watchdog:
        watchdog: Fix race condition in registration code
        watchdog: Convert to devm_ioremap_resource()
      bde9d73d
    • Linus Torvalds's avatar
      Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux · 5647ac0a
      Linus Torvalds authored
      Pull removal of GENERIC_GPIO from Grant Likely:
       "GENERIC_GPIO now synonymous with GPIOLIB.  There are no longer any
        valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it
        is possible to do so which has been causing confusion and breakage.
        This branch does the work to completely eliminate GENERIC_GPIO."
      
      * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux:
        gpio: update gpio Chinese documentation
        Remove GENERIC_GPIO config option
        Convert selectors of GENERIC_GPIO to GPIOLIB
        blackfin: force use of gpiolib
        m68k: coldfire: use gpiolib
        mips: pnx833x: remove requirement for GENERIC_GPIO
        openrisc: default GENERIC_GPIO to false
        avr32: default GENERIC_GPIO to false
        xtensa: remove explicit selection of GENERIC_GPIO
        sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB
        powerpc: remove redundant GENERIC_GPIO selection
        unicore32: default GENERIC_GPIO to false
        unicore32: remove unneeded select GENERIC_GPIO
        arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB
        arm: remove redundant GENERIC_GPIO selection
        mips: alchemy: require gpiolib
        mips: txx9: change GENERIC_GPIO to GPIOLIB
        mips: loongson: use GPIO driver on CONFIG_GPIOLIB
        mips: remove redundant GENERIC_GPIO select
      5647ac0a
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma · 1763e735
      Linus Torvalds authored
      Pull slave-dmaengine updates from Vinod Koul:
       "This time we have dmatest improvements from Andy along with dw_dmac
        fixes.  He has also done support for acpi for dmanegine.
      
        Also we have bunch of fixes going in DT support for dmanegine for
        various folks.  Then Haswell and other ioat changes from Dave and
        SUDMAC support from Shimoda."
      
      * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits)
        dma: tegra: implement suspend/resume callbacks
        dma:of: Use a mutex to protect the of_dma_list
        dma: of: Fix of_node reference leak
        dmaengine: sirf: move driver init from module_init to subsys_initcall
        sudmac: add support for SUDMAC
        dma: sh: add Kconfig
        at_hdmac: move to generic DMA binding
        ioatdma: ioat3_alloc_sed can be static
        ioatdma: Adding write back descriptor error status support for ioatdma 3.3
        ioatdma: S1200 platforms ioatdma channel 2 and 3 falsely advertise RAID cap
        ioatdma: Adding support for 16 src PQ ops and super extended descriptors
        ioatdma: Removing hw bug workaround for CB3.x .2 and earlier
        dw_dmac: add ACPI support
        dmaengine: call acpi_dma_request_slave_channel as well
        dma: acpi-dma: introduce ACPI DMA helpers
        dma: of: Remove unnecessary list_empty check
        DMA: OF: Check properties value before running be32_to_cpup() on it
        DMA: of: Constant names
        ioatdma: skip silicon bug workaround for pq_align for cb3.3
        ioatdma: Removing PQ val disable for cb3.3
        ...
      1763e735
    • Linus Torvalds's avatar
      Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux · b29bdba5
      Linus Torvalds authored
      Pull thermal management update from Zhang Rui:
       "The most important one is to build thermal core and governor and cpu
        cooling code into one module.  This fixes a regression that thermal
        core does not work if it is built as module, since 3.7.  I'll backport
        them to stable kernel once those changes are in upstream.
      
        The largest batch is the thermal kernel-doc & coding style
        updates/cleanups from Eduardo.
      
        Highlights:
      
         - build all thermal framework code into one module to fix a
           regression that thermal does not work if it is built as module.
      
         - Marvell Armada 370/XP thermal sensor driver
      
         - thermal core/cpu cooling kernel-doc & coding style updates and
           cleanups.
      
         - Add Eduardo Valentin as thermal sub-maintainer, both in mailing
           list and patchwork.  He will help me on arm thermal drivers."
      
      * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (68 commits)
        thermal: db8500_cpufreq_cooling: remove usage of IS_ERR_OR_NULL()
        thermal: thermal_core: remove usage of IS_ERR_OR_NULL
        thermal: cpu_cooling: improve line breaking
        thermal: cpu_cooling: alignment improvements
        thermal: cpu_cooling: remove checkpatch.pl warning
        thermal: cpu_cooling: remove trailing blank line
        thermal: cpu_cooling: align on open parenthesis
        thermal: cpu_cooling: standardize comment style
        thermal: cpu_cooling: standardize end of function
        thermal: cpu_cooling: remove trailing white spaces
        Thermal: update documentation for thermal_zone_device_register
        thermal: update kernel-doc for thermal_zone_device_register
        thermal: update kernel-doc for create_trip_attrs
        thermal: update kernel-doc for thermal_cooling_device_register
        thermal: update kernel-doc for thermal_zone_unbind_cooling_device
        thermal: update kernel-doc for thermal_zone_bind_cooling_device
        thermal: use EXPORT_SYMBOL_GPL
        thermal: rename notify_thermal_framework to thermal_notify_framework
        thermal: update driver license
        thermal: use strlcpy instead of strcpy
        ...
      b29bdba5
    • Jason Cooper's avatar
      ARM: dts: don't assume boards are using twl4030 for omap3 · 914dc329
      Jason Cooper authored
      If a board isn't using twl4030, then dtc will complain about the missing
      phandle (which is in twl4030.dtsi).  Move the phy declaration to the dts
      files.
      Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      914dc329
    • Tony Lindgren's avatar
      ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c · b1dd11d6
      Tony Lindgren authored
      Commit 6770b211 (ARM: OMAP2+: Export SoC information to userspace)
      had some broken return value handling as noted by Russell King:
      
      +       soc_dev = soc_device_register(soc_dev_attr);
      +       if (IS_ERR_OR_NULL(soc_dev)) {
      +               kfree(soc_dev_attr);
      +               return;
      +       }
      +
      +       parent = soc_device_to_device(soc_dev);
      +       if (!IS_ERR_OR_NULL(parent))
      +               device_create_file(parent, &omap_soc_attr);
      
      This is nonsense.  For the first, IS_ERR() is sufficient.  For the second,
      tell me what error checking is required in the return value of this
      function:
      
      struct device *soc_device_to_device(struct soc_device *soc_dev)
      {
              return &soc_dev->dev;
      }
      
      when you've already determined that the passed soc_dev is a valid pointer.
      If you read the comments against the prototype:
      
      /**
       * soc_device_to_device - helper function to fetch struct device
       * @soc: Previously registered SoC device container
       */
      struct device *soc_device_to_device(struct soc_device *soc);
      
      if "soc" is valid, it means the "previously registered SoC device container"
      must have succeeded and that can only happen if the struct device has been
      registered.  Ergo, there will always be a valid struct device pointer for
      any registered SoC device container.  Therefore, if soc_device_register()
      succeeds, then the return value from soc_device_to_device() will always be
      valid and no error checking of it is required.
      
      Simples.  The rule as ever applies here: get to know the APIs your using
      and don't fumble around in the dark hoping that you'll get this stuff
      right.
      
      Fix it as noted by Russell.
      Reported-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      b1dd11d6
    • Srivatsa S. Bhat's avatar
      EDAC: Don't give write permission to read-only files · c8c64d16
      Srivatsa S. Bhat authored
      I get the following warning on boot:
      
      ------------[ cut here ]------------
      WARNING: at drivers/base/core.c:575 device_create_file+0x9a/0xa0()
      Hardware name:  -[8737R2A]-
      Write permission without 'store'
      ...
      </snip>
      
      Drilling down, this is related to dynamic channel ce_count attribute
      files sporting a S_IWUSR mode without a ->store() function. Looking
      around, it appears that they aren't supposed to have a ->store()
      function. So remove the bogus write permission to get rid of the
      warning.
      Signed-off-by: default avatarSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
      Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
      Cc: <stable@vger.kernel.org> # 3.[89]
      [ shorten commit message ]
      Signed-off-by: default avatarBorislav Petkov <bp@suse.de>
      c8c64d16
    • Guenter Roeck's avatar
      watchdog: Fix race condition in registration code · 60403f7a
      Guenter Roeck authored
      A race condition exists when registering the first watchdog device.
      Sequence of events:
      
      - watchdog_register_device calls watchdog_dev_register
      - watchdog_dev_register creates the watchdog misc device by calling
        misc_register.
        At that time, the matching character device (/dev/watchdog0) does not yet
        exist, and old_wdd is not set either.
      - Userspace gets an event and opens /dev/watchdog
      - watchdog_open is called and sets wdd = old_wdd, which is still NULL,
        and tries to dereference it. This causes the kernel to panic.
      
      Seen with systemd trying to open /dev/watchdog immediately after
      it was created.
      Reported-by: default avatarArkadiusz Miskiewicz <arekm@maven.pl>
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Tested-by: default avatarArkadiusz Miskiewicz <arekm@maven.pl>
      Signed-off-by: default avatarWim Van Sebroeck <wim@iguana.be>
      60403f7a
    • Sachin Kamat's avatar
      watchdog: Convert to devm_ioremap_resource() · 6330c707
      Sachin Kamat authored
      Use the newly introduced devm_ioremap_resource() instead of
      devm_request_and_ioremap() which provides more consistent error handling.
      
      devm_ioremap_resource() provides its own error messages; so all explicit
      error messages can be removed from the failure code paths.
      Signed-off-by: default avatarSachin Kamat <sachin.kamat@linaro.org>
      Reviewed-by: default avatarThierry Reding <thierry.reding@avionic-design.de>
      Cc: Gabor Juhos <juhosg@openwrt.org>
      Cc: Paul Mundt <lethal@linux-sh.org>
      Signed-off-by: default avatarWim Van Sebroeck <wim@iguana.be>
      6330c707
    • Tony Lindgren's avatar
      ARM: dts: Configure and fix the McSPI pins for 4430sdp · d5a2b34f
      Tony Lindgren authored
      The bootloader configures the pins, but has pull bits
      set without pull enable bits. While this is harmless,
      and won't do anything, it seems to cause confusion at
      least for me every time looking at the pin configuration.
      Fix it for DT based boot.
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      d5a2b34f
    • Philip Avinash's avatar
      ARM: dts: AM33XX: Add GPMC node · e45879ec
      Philip Avinash authored
      Add GPMC data node to AM33XX device tree file.
      Signed-off-by: default avatarPhilip Avinash <avinashphilip@ti.com>
      Acked-by: default avatarPeter Korsgaard <jacmet@sunsite.dk>
      Signed-off-by: default avatarPekon Gupta <pekon@ti.com>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      e45879ec
    • Nishanth Menon's avatar
      ARM: dts: OMAP4460: Fix CPU OPP voltages · 45465c5e
      Nishanth Menon authored
      commit d16fb25d (ARM: dts: OMAP4460: Add CPU OPP table)
      introduced wrong OPP voltages per OPP by mistake. Sync the OPP
      tables with existing OMAP4460 OPP data in
      arch/arm/mach-omap2/opp4xxx_data.c
      Signed-off-by: default avatarNishanth Menon <nm@ti.com>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      45465c5e
    • Nishanth Menon's avatar
      ARM: dts: OMAP36xx: Fix CPU OPP voltages · e011cf69
      Nishanth Menon authored
      commit 3027e267 (ARM: dts: OMAP36xx: Add CPU OPP table)
      introduced wrong OPP voltages per OPP by mistake. Sync the OPP
      tables with existing OMAP36xx OPP data in
      arch/arm/mach-omap2/opp3xxx_data.c
      Signed-off-by: default avatarNishanth Menon <nm@ti.com>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      e011cf69
    • Peter Ujfalusi's avatar
      ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module · 827897c0
      Peter Ujfalusi authored
      Boards supported upstream all use TWL6040 as audio codec, enable the common
      ASoC machine driver by default for them.
      Signed-off-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
      Tested-by: default avatarJyri Sarha <jsarha@ti.com>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      827897c0
    • Vaibhav Hiremath's avatar
      ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si · d240ef30
      Vaibhav Hiremath authored
      Add support for chip id detection of AM335x PG2.1 Silicon.
      
      Currently omap3xxx_check_revision() detects PG1.0 and PG2.0 only,
      this patch extends it by adding PG2.1 Si support.
      Signed-off-by: default avatarVaibhav Hiremath <hvaibhav@ti.com>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      d240ef30
    • Christoph Fritz's avatar
      omap: mux: add AM/DM37x gpios · 27b105bb
      Christoph Fritz authored
      This patch adds GPIO pins found on AM/DM37x.
      Signed-off-by: default avatarChristoph Fritz <chf.fritz@googlemail.com>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      27b105bb
    • Tony Lindgren's avatar
  2. 08 May, 2013 6 commits
    • Wei Yongjun's avatar
      ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init() · 348c3422
      Wei Yongjun authored
      Add the missing iounmap() before return from omap1_system_dma_init()
      in the error handling case.
      Also removed platform_device_del() on add resources error case which
      cause dup device delete.
      Signed-off-by: default avatarWei Yongjun <yongjun_wei@trendmicro.com.cn>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      348c3422
    • Kevin Hilman's avatar
      ARM: OMAP2+: omap_device: use late_initcall_sync · e7e17c53
      Kevin Hilman authored
      If DEBUG_LL and earlyprintk are enabled, and omap-serial.c is compiled
      as a module, the kernel boot hangs early as the clocks for serial port
      are cut while earlyprintk still uses the port.
      
      The problem is a race between the late_initcall for omap_device (which
      idles devices that have no drivers) and the late_initcall in
      kernel/printk.c which turns off the earlyconsole.   Any printks
      that happen between this omap_device late initcall and the earlyconsole
      late initcall will crash when accessing the UART.
      
      The fix is to ensure the omap_device initcall happens after the
      earlyconsole initcall.
      Reported-by: default avatarTony Lindgren <tony@atomide.com>
      Signed-off-by: default avatarKevin Hilman <khilman@linaro.org>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      e7e17c53
    • Aaro Koskinen's avatar
      ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices · e65f131a
      Aaro Koskinen authored
      Commit 9fdca9df (spi: omap2-mcspi: convert to module_platform_driver)
      broke the SPI display/panel driver probe on RX-51/N900. The exact cause is
      not fully understood, but it seems to be related to the probe order. SPI
      communication to the panel driver (spi1.2) fails unless the touchscreen
      (spi1.0) has been probed/initialized before. When the omap2-mcspi driver
      was converted to a platform driver, it resulted in that the devices are
      probed immediately after the board registers them in the order they are
      listed in the board file.
      
      Fix the issue by moving the touchscreen before the panel in the SPI
      device list.
      
      The patch fixes the following failure:
      
      [    1.260955] acx565akm spi1.2: invalid display ID
      [    1.265899] panel-acx565akm display0: acx_panel_probe panel detect error
      [    1.273071] omapdss CORE error: driver probe failed: -19
      Tested-by: default avatarSebastian Reichel <sre@debian.org>
      Signed-off-by: default avatarAaro Koskinen <aaro.koskinen@iki.fi>
      Cc: Pali Rohár <pali.rohar@gmail.com>
      Cc: Joni Lapilainen <joni.lapilainen@gmail.com>
      Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
      Cc: Felipe Balbi <balbi@ti.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      e65f131a
    • Roger Quadros's avatar
      ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx · cf7dd658
      Roger Quadros authored
      On Beagle xM Rev. Ax/Bx, the USB power enable GPIO logic is
      reversed when compared to other revisions i.e. it is
      active high instead of active low.
      
      Use the beagle_config.usb_pwr_level flag correctly so that
      the power regulator can be configured at runtime.
      Signed-off-by: default avatarRoger Quadros <rogerq@ti.com>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      cf7dd658
    • Linus Torvalds's avatar
      Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband · e0fd9aff
      Linus Torvalds authored
      Pull InfiniBand/RDMA changes from Roland Dreier:
       - XRC transport fixes
       - Fix DHCP on IPoIB
       - mlx4 preparations for flow steering
       - iSER fixes
       - miscellaneous other fixes
      
      * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (23 commits)
        IB/iser: Add support for iser CM REQ additional info
        IB/iser: Return error to upper layers on EAGAIN registration failures
        IB/iser: Move informational messages from error to info level
        IB/iser: Add module version
        mlx4_core: Expose a few helpers to fill DMFS HW strucutures
        mlx4_core: Directly expose fields of DMFS HW rule control segment
        mlx4_core: Change a few DMFS fields names to match firmare spec
        mlx4: Match DMFS promiscuous field names to firmware spec
        mlx4_core: Move DMFS HW structs to common header file
        IB/mlx4: Set link type for RAW PACKET QPs in the QP context
        IB/mlx4: Disable VLAN stripping for RAW PACKET QPs
        mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level
        RDMA/iwcm: Don't touch cmid after dropping reference
        IB/qib: Correct qib_verbs_register_sysfs() error handling
        IB/ipath: Correct ipath_verbs_register_sysfs() error handling
        RDMA/cxgb4: Fix SQ allocation when on-chip SQ is disabled
        SRPT: Fix odd use of WARN_ON()
        IPoIB: Fix ipoib_hard_header() return value
        RDMA: Rename random32() to prandom_u32()
        RDMA/cxgb3: Fix uninitialized variable
        ...
      e0fd9aff
    • Linus Torvalds's avatar
      Merge tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 · 3d15b798
      Linus Torvalds authored
      Pull arm64 update from Catalin Marinas:
      
       - Since drivers/irqchip/irq-gic.c no longer has dependencies on arm32
         specifics (the 'gic' branch merged), it can be enabled on arm64.
      
       - Enable arm64 support for poweroff/restart (for code under
         drivers/power/reset/).
      
       - Fixes (dts file, exception handling, bitops)
      
      * tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
        arm64: Treat the bitops index argument as an 'int'
        arm64: Ignore the 'write' ESR flag on cache maintenance faults
        arm64: dts: fix #address-cells for foundation-v8
        arm64: vexpress: Add support for poweroff/restart
        arm64: Enable support for the ARM GIC interrupt controller
      3d15b798