[Why]

drm_normalize_zpos will set the crtc_state->zpos_changed to 1 if any of
it's assigned planes changes zpos, or is removed/added from it.

To have amdgpu_dm request a plane reset on this is too broad. For
example, if only the cursor plane was moved from one crtc to another,
the crtc's zpos_changed will be set to true. But that does not mean that
the underlying primary plane requires a reset.

[How]

Narrow it down so that only the plane that has a change in zpos will
require a reset.

As a future TODO, we can further optimize this by only requiring a reset
on z-order change. Z-order is different from z-pos, since a zpos change
doesn't necessarily mean the z-ordering changed, and DC should only
require a reset if the z-ordering changed.

For example, the following zpos update does not change z-ordering:

    Plane A: zpos 2 -> 3
    Plane B: zpos 1 -> 2
    => Plane A is still on top of plane B: no reset needed

Whereas this one does change z-ordering:

    Plane A: zpos 2 -> 1
    Plane B: zpos 1 -> 2
    => Plane A changed from on top, to below plane B: reset needed

Fixes: 38e0c3df ("drm/amd/display: Move PRIMARY plane zpos higher")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3569Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 578aab4e)

dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn35_set_drr() is a member of this resource context.

If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn35_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.

The logic in dcn35_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.

Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e16 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0607a50c)
Cc: stable@vger.kernel.org

dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn10_set_drr() is a member of this resource context.

If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn10_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.

The logic in dcn10_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.

Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e16 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Tested-by: Raoul van Rüschen <raoul.van.rueschen@gmail.com>
Tested-by: Christopher Snowhill <chris@kode54.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Sefa Eyeoglu <contact@scrumplex.net>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a3cc326a)
Cc: stable@vger.kernel.org

Populate cache line size info in topology based on information from IP
discovery table.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Sreekant Somasekharan <Sreekant.Somasekharan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4e9fadac)

Merge tag 'amd-drm-fixes-6.11-2024-09-05' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.11-2024-09-05:

amdgpu:
- IPS workaround
- Fix compatibility with older MES firmware
- Fix CPU spikes when clearing VRAM
- Backlight fix
- PMO fix
- Revert SWSMU change to fix regression
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905190533.854116-1-alexander.deucher@amd.com

Merge tag 'drm-misc-fixes-2024-09-05' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

A zpos normalization fix for komeda, a register bitmask fix for nouveau,
a memory leak fix for imagination, three fixes for the recent bridge
HDMI work, a potential DoS fix and a cache coherency for panthor, a
change of panel compatible and a deferred-io fix when used with
non-highmem memory.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905-original-radical-guan-e7a2ae@houat

- GSC loading fix (Daniele)
- PCODE mutex fix (Matt)
- Suspend/Resume fixes (Maarten, Imre)
- RPM fixes (Rodrigo)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZtmyFvDfFLPbuf6A@intel.com

Merge tag 'drm-intel-fixes-2024-09-05' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes

- drm/i915: Do not attempt to load the GSC multiple times (Daniele Ceraolo Spurio)
- drm/i915: Fix readout degamma_lut mismatch on ilk/snb (Ville Syrjälä)
- drm/i915/fence: Mark debug_fence_init_onstack() with __maybe_unused (Andy Shevchenko)
- drm/i915/fence: Mark debug_fence_free() with __maybe_unused (Andy Shevchenko)
- drm/i915/display: Add mechanism to use sink model when applying quirk [display] (Jouni Högander)
- drm/i915/display: Increase Fast Wake Sync length as a quirk [display] (Jouni Högander)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Ztlo2hVO4SBvfAnq@linux

This reverts commit 8f614469.

This breaks some manual setting of the profile mode in
certain cases.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3600Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7a199557)
Cc: stable@vger.kernel.org

Deferred I/O requires struct page for framebuffer memory, which is
not guaranteed for all DMA ranges. We thus only install deferred I/O
if we have a framebuffer that requires it.

A reported bug affected the ipu-v3 and pl111 drivers, which have video
memory in either Normal or HighMem zones

[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000010000000-0x000000003fffffff]
[    0.000000]   HighMem  [mem 0x0000000040000000-0x000000004fffffff]

where deferred I/O only works correctly with HighMem. See the Closes
tags for bug reports.

v2:
- test if screen_buffer supports deferred I/O (Sima)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 808a40b6 ("drm/fbdev-dma: Implement damage handling and deferred I/O")
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Closes: https://lore.kernel.org/all/23636953.6Emhk5qWAg@steina-w/Reported-by: Linus Walleij <linus.walleij@linaro.org>
Closes: https://lore.kernel.org/dri-devel/CACRpkdb+hb9AGavbWpY-=uQQ0apY9en_tWJioPKf_fAbXMP4Hg@mail.gmail.com/Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904123750.31206-1-tzimmermann@suse.de

In the off-chance that waiting for the firmware to signal its booted status
timed out in the fast reset path, one must flush the cache lines for the
entire FW VM address space before reloading the regions, otherwise stale
values eventually lead to a scheduler job timeout.

Fixes: 647810ec ("drm/panthor: Add the MMU/VM logical block")
Cc: stable@vger.kernel.org
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902130237.3440720-1-adrian.larumbe@collabora.com

As per the previous dt-binding commit, update the WL-355608-A8 panel
compatible to reflect the the integrating device vendor and name as the
panel OEM is unknown.

Fixes: 62ea2eeb ("drm: panel: nv3052c: Add WL-355608-A8 panel")
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904012456.35429-3-ryan@testtoast.com

The WL-355608-A8 is a 3.5" 640x480@60Hz RGB LCD display from an unknown
OEM used in a number of handheld gaming devices made by Anbernic.
Previously committed using the OEM serial without a vendor prefix,
however following subsequent discussion the preference is to use the
integrating device vendor and name where the OEM is unknown.

There are 4 RG35XX series devices from Anbernic based on an Allwinner
H700 SoC using this panel, with the -Plus variant introduced first.
Therefore the -Plus is used as the fallback for the subsequent -H,
-2024, and -SP devices.

Alter the filename and compatible string to reflect the convention.

Fixes: 45b888a8 ("dt-bindings: display: panel: Add WL-355608-A8 panel")
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904012456.35429-2-ryan@testtoast.com

We were allowing any users to create a high priority group without any
permission checks. As a result, this was allowing possible denial of
service.

We now only allow the DRM master or users with the CAP_SYS_NICE
capability to set higher priorities than PANTHOR_GROUP_PRIORITY_MEDIUM.

As the sole user of that uAPI lives in Mesa and hardcode a value of
MEDIUM [1], this should be safe to do.

Additionally, as those checks are performed at the ioctl level,
panthor_group_create now only check for priority level validity.

[1]https://gitlab.freedesktop.org/mesa/mesa/-/blob/f390835074bdf162a63deb0311d1a6de527f9f89/src/gallium/drivers/panfrost/pan_csf.c#L1038Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Fixes: de854881 ("drm/panthor: Add the scheduler logical block")
Cc: stable@vger.kernel.org
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903144955.144278-2-mary.guillemard@collabora.com

Fix circular locking dependency on runtime suspend.

<4> [74.952215] ======================================================
<4> [74.952217] WARNING: possible circular locking dependency detected
<4> [74.952219] 6.10.0-rc7-xe #1 Not tainted
<4> [74.952221] ------------------------------------------------------
<4> [74.952223] kworker/7:1/82 is trying to acquire lock:
<4> [74.952226] ffff888120548488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_modeset_lock_all+0x40/0x1e0 [drm]
<4> [74.952260]
but task is already holding lock:
<4> [74.952262] ffffffffa0ae59c0 (xe_pm_runtime_lockdep_map){+.+.}-{0:0}, at: xe_pm_runtime_suspend+0x2f/0x340 [xe]
<4> [74.952322]
which lock already depends on the new lock.

The commit 'b1d90a86 ("drm/xe: Use the encoder suspend helper also used
by the i915 driver")' didn't do anything wrong. It actually fixed a
critical bug, because the encoder_suspend was never getting actually
called because it was returning if (has_display(xe)) instead of
if (!has_display(xe)). However, this ended up introducing the encoder
suspend calls in the runtime routines as well, causing the circular
locking dependency.

Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2304
Fixes: b1d90a86 ("drm/xe: Use the encoder suspend helper also used by the i915 driver")
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830183507.298351-2-rodrigo.vivi@intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 8da19441)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Enable/Disable user access only during system suspend/resume.
This should not happen during runtime s/r

v2: rebased
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823112148.327015-2-vinod.govindapillai@intel.com
(cherry picked from commit a64e7e5b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Suspend fbdev sooner, and disable user access before suspending to
prevent some races. I've noticed this when comparing xe suspend to
i915's.

Matches the following commits from i915:
24b412b1 ("drm/i915: Disable intel HPD poll after DRM poll init/enable")
1ef28d86 ("drm/i915: Suspend the framebuffer console earlier during system suspend")
bd738d85 ("drm/i915: Prevent modesets during driver init/shutdown")

Thanks to Imre for pointing me to those commits.

Driver shutdown is currently missing, but I have some idea how to
implement it next.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806105044.596842-2-maarten.lankhorst@linux.intel.comSigned-off-by: Maarten Lankhorst,,, <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 492be2a0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Fixes this missed case:

xe 0000:00:02.0: [drm] Missing outer runtime PM protection
WARNING: CPU: 99 PID: 1455 at drivers/gpu/drm/xe/xe_pm.c:564 xe_pm_runtime_get_noresume+0x48/0x60 [xe]
Call Trace:
<TASK>
? show_regs+0x67/0x70
? __warn+0x94/0x1b0
? xe_pm_runtime_get_noresume+0x48/0x60 [xe]
? report_bug+0x1b7/0x1d0
? handle_bug+0x46/0x80
? exc_invalid_op+0x19/0x70
? asm_exc_invalid_op+0x1b/0x20
? xe_pm_runtime_get_noresume+0x48/0x60 [xe]
xe_device_declare_wedged+0x91/0x280 [xe]
gt_reset_worker+0xa2/0x250 [xe]

v2: Also move get and get the right Fixes tag (Himal, Brost)

Fixes: fb74b205 ("drm/xe: Introduce a simple wedged state")
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830183507.298351-1-rodrigo.vivi@intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit bc947d9a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

There's only one instance of the pcode per tile, and for GT-related
accesses both the primary and media GT share the same register
interface.  Since Xe was using per-GT locking, the pcode mutex wasn't
actually protecting everything that it should since concurrent accesses
related to a tile's primary GT and media GT were possible.

Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829220619.789159-5-matthew.d.roper@intel.com
(cherry picked from commit 3034cc81)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

The GSC HW is only reset by driver FLR or D3cold entry. We don't support
the former at runtime, while the latter is only supported on DGFX, for
which we don't support GSC. Therefore, if GSC failed to load previously
there is no need to try again because the HW is stuck in the error state.

An assert has been added so that if we ever add DGFX support we'll know
we need to handle the D3 case.

v2: use "< 0" instead of "!= 0" in the FW state error check (Julia).

Fixes: dd0e89e5 ("drm/xe/gsc: GSC FW load")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828215158.2743994-2-daniele.ceraolospurio@intel.com
(cherry picked from commit 2160f6f6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

On HDMI connectors which use drm_bridge_connector and DRM_BRIDGE_OP_HDMI
IGT chokes on the max_bpc property in several kms_properties tests due
to the drm_bridge_connector failing to reset HDMI-related
properties.

Call __drm_atomic_helper_connector_hdmi_reset() if the
drm_bridge_connector has bridge_hdmi.

It is impossible to call this function from HDMI bridges, none of the
bridge callbacks correspond to the drm_connector_funcs::reset().

Fixes: 6b4468b0 ("drm/bridge-connector: implement glue code for HDMI connector")
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-3-daebde6d9857@linaro.orgSigned-off-by: Maxime Ripard <mripard@kernel.org>

drm_bridge_connector is a "leaf" driver, belonging to the display
helper, rather than the "CRTC" drm_kms_helper module. Move the driver
to the drm/display and add necessary Kconfig selection clauses.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.orgSigned-off-by: Maxime Ripard <mripard@kernel.org>

Kconfig symbols should not declare dependency on DRM_DISPLAY_HELPER.
Move all parts of DRM_DISPLAY_HELPER to an if DRM_DISPLAY_HELPER block.

It is not possible to make those symbols select DRM_DISPLAY_HELPER
because of the link issues when a part of the helper is selected to be
built-in, while other part is selected to be as module. In such a case
the modular part doesn't get built at all, leading to undefined symbols.

The only viable alternative is to split drm_display_helper.ko into
several small modules, each of them having their own dependencies.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-1-daebde6d9857@linaro.orgSigned-off-by: Maxime Ripard <mripard@kernel.org>

In commit "drm/i915/display: Increase number of fast wake precharge pulses"
we were increasing Fast Wake sync pulse length to fix problems observed on
Dell Precision 5490 laptop with AUO panel. Later we have observed this is
causing problems on other panels.

Fix these problems by increasing Fast Wake sync pulse length as a quirk
applied for Dell Precision 5490 with problematic panel.

Fixes: f7777286 ("drm/i915/display: Increase number of fast wake precharge pulses")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Closes: http://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9739
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2246
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11762Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Link: https://patchwork.freedesktop.org/patch/msgid/20240902064241.1020965-3-jouni.hogander@intel.com
(cherry picked from commit fcba2ed6)
Requires: 43cf50eb ("drm/i915/display: Add mechanism to use sink model when applying quirk")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Currently there is no way to apply quirk on device only if certain panel
model is installed. This patch implements such mechanism by adding new
quirk type intel_dpcd_quirk which contains also sink_oui and sink_device_id
fields and using also them to figure out if applying quirk is needed.

New intel_init_dpcd_quirks is added and called after drm_dp_read_desc with
proper sink device identity read from dpcdc.

v3:
  - !mem_is_zero fixed to mem_is_zero
v2:
  - instead of using struct intel_quirk add new struct intel_dpcd_quirk
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902064241.1020965-2-jouni.hogander@intel.com
(cherry picked from commit b3b91369)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

PMO assumes that like timings can be synchronized, but DC only allows
this if the signal types match.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 29d3d6af)
Cc: stable@vger.kernel.org

Backlight updates require aux and/or register access. Therefore, driver
needs to disallow IPS beforehand.

So, acquire the dc lock before calling into dc to update backlight - we
should be doing this regardless of IPS. Then, while the lock is held,
disallow IPS before calling into dc, then allow IPS afterwards (if it
was previously allowed).
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 988fe286)
Cc: stable@vger.kernel.org # 6.10+

This adds allocation latency, but aligns better with user
expectations.  The latency should improve with the drm buddy
clearing patches that Arun has been working on.

In addition this fixes the high CPU spikes seen when doing
wipe on release.

v2: always set AMDGPU_GEM_CREATE_VRAM_CLEARED (Christian)

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3528
Fixes: a68c7eaa ("drm/amdgpu: Enable clear page functionality")
Acked-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
(cherry picked from commit 6c0a7c3c)
Cc: stable@vger.kernel.org # 6.10.x

For mes11 old firmware has issue to map legacy queue,
add a flag to switch mes to map legacy queue.

Fixes: f9d8c5c7 ("drm/amdgpu/gfx: enable mes to map legacy queue support")
Reported-by: Andrew Worsley <amworsley@gmail.com>
Link: https://lists.freedesktop.org/archives/amd-gfx/2024-August/112773.htmlSigned-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 52491d97)

[Why]

DCN IPS interoperates with other system idle power features, such as
Zstates.

On DCN35, there is a known issue where system Z8 + DCN IPS2 causes a
hard hang. We observe this on systems where the SBIOS allows Z8.

Though there is a SBIOS fix, there's no guarantee that users will get it
any time soon, or even install it. A workaround is needed to prevent
this from rearing its head in the wild.

[How]

For DCN35, check the pmfw version to determine whether the SBIOS has the
fix. If not, set IPS1+RCG as the deepest possible state in all cases
except for s0ix and display off (DPMS). Otherwise, enable all IPS
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 28d43d08)
Cc: stable@vger.kernel.org

When debug_fence_free() is unused
(CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS=n), it prevents kernel builds
with clang, `make W=1` and CONFIG_WERROR=y:

.../i915_sw_fence.c:118:20: error: unused function 'debug_fence_free' [-Werror,-Wunused-function]
  118 | static inline void debug_fence_free(struct i915_sw_fence *fence)
      |                    ^~~~~~~~~~~~~~~~

Fix this by marking debug_fence_free() with __maybe_unused.

See also commit 6863f564 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").

Fixes: fc158405 ("drm/i915: Integrate i915_sw_fence with debugobjects")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-3-andriy.shevchenko@linux.intel.comSigned-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 8be4dce5)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

When debug_fence_init_onstack() is unused (CONFIG_DRM_I915_SELFTEST=n),
it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y:

.../i915_sw_fence.c:97:20: error: unused function 'debug_fence_init_onstack' [-Werror,-Wunused-function]
   97 | static inline void debug_fence_init_onstack(struct i915_sw_fence *fence)
      |                    ^~~~~~~~~~~~~~~~~~~~~~~~

Fix this by marking debug_fence_init_onstack() with __maybe_unused.

See also commit 6863f564 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").

Fixes: 214707fc ("drm/i915/selftests: Wrap a timer into a i915_sw_fence")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-2-andriy.shevchenko@linux.intel.comSigned-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 5bf47205)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

On ilk/snb the pipe may be configured to place the LUT before or
after the CSC depending on various factors, but as there is only
one LUT (no split mode like on IVB+) we only advertise a gamma_lut
and no degamma_lut in the uapi to avoid confusing userspace.

This can cause a problem during readout if the VBIOS/GOP enabled
the LUT in the pre CSC configuration. The current code blindly
assigns the results of the readout to the degamma_lut, which will
cause a failure during the next atomic_check() as we aren't expecting
anything to be in degamma_lut since it's not visible to userspace.

Fix the problem by assigning whatever LUT we read out from the
hardware into gamma_lut.

Cc: stable@vger.kernel.org
Fixes: d2559299 ("drm/i915: Make ilk_read_luts() capable of degamma readout")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11608Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710124137.16773-1-ville.syrjala@linux.intel.comReviewed-by: Uma Shankar <uma.shankar@intel.com>
(cherry picked from commit 33eca84d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

If the GSC FW fails to load the GSC HW hangs permanently; the only ways
to recover it are FLR or D3cold entry, with the former only being
supported on driver unload and the latter only on DGFX, for which we
don't need to load the GSC. Therefore, if GSC fails to load there is no
need to try again because the HW is stuck in the error state and the
submission to load the FW would just hang the GSCCS.

Note that, due to wa_14015076503, on MTL the GuC escalates all GSCCS
hangs to full GT resets, which would trigger a new attempt to load the
GSC FW in the post-reset HW re-init; this issue is also fixed by not
attempting to load the GSC FW after an error.

Fixes: 15bd4a67 ("drm/i915/gsc: GSC firmware loading")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v6.3+
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820215952.2290807-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 03ded4d4)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

This caused a measurable memory leak. Although the individual
allocations are small, the leaks occurs in a high-usage codepath
(remapping or unmapping device memory) so they add up quickly.

Fixes: ff5f643d ("drm/imagination: Add GEM and VM related code")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Link: https://patchwork.freedesktop.org/patch/msgid/35867394-d8ce-4698-a8fd-919a018f1583@imgtec.comSigned-off-by: Matt Coster <matt.coster@imgtec.com>

Pull smb client fixes from Steve French:

 - copy_file_range fix

 - two read fixes including read past end of file rc fix and read retry
   crediting fix

 - falloc zero range fix

* tag 'v6.11-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix FALLOC_FL_ZERO_RANGE to preflush buffered part of target region
  cifs: Fix copy offload to flush destination region
  netfs, cifs: Fix handling of short DIO read
  cifs: Fix lack of credit renegotiation on read retry

Push bcachefs fixes from Kent Overstreet:
 "The data corruption in the buffered write path is troubling; inode
  lock should not have been able to cause that...

   - Fix a rare data corruption in the rebalance path, caught as a nonce
     inconsistency on encrypted filesystems

   - Revert lockless buffered write path

   - Mark more errors as autofix"

* tag 'bcachefs-2024-08-21' of https://github.com/koverstreet/bcachefs:
  bcachefs: Mark more errors as autofix
  bcachefs: Revert lockless buffered IO path
  bcachefs: Fix bch2_extents_match() false positive
  bcachefs: Fix failure to return error in data_update_index_update()

errors that are known to always be safe to fix should be autofix: this
should be most errors even at this point, but that will need some
thorough review.

note that errors are still logged in the superblock, so we'll still know
that they happened.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We had a report of data corruption on nixos when building installer
images.

https://github.com/NixOS/nixpkgs/pull/321055#issuecomment-2184131334

It seems that writes are being dropped, but only when issued by QEMU,
and possibly only in snapshot mode. It's undetermined if it's write
calls are being dropped or dirty folios.

Further testing, via minimizing the original patch to just the change
that skips the inode lock on non appends/truncates, reveals that it
really is just not taking the inode lock that causes the corruption: it
has nothing to do with the other logic changes for preserving write
atomicity in corner cases.

It's also kernel config dependent: it doesn't reproduce with the minimal
kernel config that ktest uses, but it does reproduce with nixos's distro
config. Bisection the kernel config initially pointer the finger at page
migration or compaction, but it appears that was erroneous; we haven't
yet determined what kernel config option actually triggers it.

Sadly it appears this will have to be reverted since we're getting too
close to release and my plate is full, but we'd _really_ like to fully
debug it.

My suspicion is that this patch is exposing a preexisting bug - the
inode lock actually covers very little in IO paths, and we have a
different lock (the pagecache add lock) that guards against races with
truncate here.

Fixes: 7e64c86c ("bcachefs: Buffered write path now can avoid the inode lock")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>