- 22 Mar, 2017 11 commits
-
-
Rick Farrington authored
Add timeout error message in lio_process_ordered_list(). Add host failure status in existing error message in if_cfg_callback(). Signed-off-by:
Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Satanand Burla authored
Remove code duplicated in PF and VF; define that code once only in a common header file included by PF and VF. Signed-off-by:
Satanand Burla <satananda.burla@cavium.com> Signed-off-by:
-
David S. Miller authored
Joao Pinto says: ==================== net: stmmac: adding multiple buffers and routing As agreed with David Miller, this patch-set is the third and last to enable multiple queues in stmmac. This third one focuses on: a) Enable multiple buffering to the driver and queue independent data b) Configuration of RX and TX queues' priority c) Configuration of RX queues' routing ==================== Signed-off-by: -
Joao Pinto authored
This patch adds the configuration of RX queues' routing. Signed-off-by:
Joao Pinto <jpinto@synopsys.com> Signed-off-by:
-
Joao Pinto authored
This patch adds the configuration of RX and TX queues' priority. Signed-off-by:
-
Joao Pinto authored
This patch creates 2 new structures (stmmac_tx_queue and stmmac_rx_queue) in include/linux/stmmac.h, enabling that each RX and TX queue has its own buffers and data. Signed-off-by:
-
Tobias Klauser authored
Use ether_addr_copy() instead of memcpy() to set netdev->dev_addr (which is 2-byte aligned). Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Reviewed-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: small driver update Contains two cleanup patches. ==================== Signed-off-by: -
Or Gerlitz authored
Align the default case for matchall offload with what's there for flower. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Acked-by:
Yotam Gigi <yotamg@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Arkadi Sharshevsky authored
Currently the struct representing router interface "mlxsw_sp_rif" is reffered as "r" in various places in the driver. Furthermore it contains a member which specify the index which is called "rif". This patch change "r" to "rif" and "rif" to "rif_index". Signed-off-by:
Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by:
-
hayeswang authored
Check hw version first in probe(). Do nothing if the driver doesn't support the chip. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
- 21 Mar, 2017 20 commits
-
-
David S. Miller authored
Philippe Reynes says: ==================== net: usbnet: move to new api ethtool_{get|set}_link_ksettings The ethtool api {get|set}_settings is deprecated. On usbnet, it was often implemented with usbnet_{get|set}_settings. In this series, I add usbnet_{get|set}_link_ksettings in the first patch, then I update all the driver to use this new api, and in the last patch I remove the old api usbnet_{get|set}_settings. ==================== Signed-off-by: -
Philippe Reynes authored
The function usbnet_{get|set}_settings is no longer used, so we remove it. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:poma <poma@gmail.com> Signed-off-by:
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We add the new api {get|set}_link_ksettings to this driver. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Florian Fainelli authored
__bcmgenet_tx_reclaim() is currently summing TX bytes/packets in a way that is not SMP friendly, mutliples CPUs could run __bcmgenet_tx_reclaim() independently and still update stats->tx_bytes and stats->tx_packets, cloberring the other CPUs statistics. Fix this by tracking per RX and TX rings the number of bytes, packets, dropped and errors statistics, and provide a bcmgenet_get_stats() function which aggregates everything and returns a consistent output. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Nikolay Aleksandrov authored
This patch adds support for ECMP hash policy choice via a new sysctl called fib_multipath_hash_policy and also adds support for L4 hashes. The current values for fib_multipath_hash_policy are: 0 - layer 3 (default) 1 - layer 4 If there's an skb hash already set and it matches the chosen policy then it will be used instead of being calculated (currently only for L4). In L3 mode we always calculate the hash due to the ICMP error special case, the flow dissector's field consistentification should handle the address order thus we can remove the address reversals. If the skb is provided we always use it for the hash calculation, otherwise we fallback to fl4, that is if skb is NULL fl4 has to be set. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Andrey Vagin authored
wanted_features is a set of features which have to be enabled if a hardware allows that. Currently when a vlan device is created, its wanted_features is set to current features of its base device. The problem is that the base device can get new features and they are not propagated to vlan-s of this device. If we look at bonding devices, they doesn't have this problem and this patch suggests to fix this issue by the same way how it works for bonding devices. We meet this problem, when we try to create a vlan device over a bonding device. When a system are booting, real devices require time to be initialized, so bonding devices created without slaves, then vlan devices are created and only then ethernet devices are added to the bonding device. As a result we have vlan devices with disabled scatter-gather. * create a bonding device $ ip link add bond0 type bond $ ethtool -k bond0 | grep scatter scatter-gather: off tx-scatter-gather: off [requested on] tx-scatter-gather-fraglist: off [requested on] * create a vlan device $ ip link add link bond0 name bond0.10 type vlan id 10 $ ethtool -k bond0.10 | grep scatter scatter-gather: off tx-scatter-gather: off tx-scatter-gather-fraglist: off * Add a slave device to bond0 $ ip link set dev eth0 master bond0 And now we can see that the bond0 device has got the scatter-gather feature, but the bond0.10 hasn't got it. [root@laptop linux-task-diag]# ethtool -k bond0 | grep scatter scatter-gather: on tx-scatter-gather: on tx-scatter-gather-fraglist: on [root@laptop linux-task-diag]# ethtool -k bond0.10 | grep scatter scatter-gather: off tx-scatter-gather: off tx-scatter-gather-fraglist: off With this patch the vlan device will get all new features from the bonding device. Here is a call trace how features which are set in this patch reach dev->wanted_features. register_netdevice vlan_dev_init ... dev->hw_features = NETIF_F_HW_CSUM | NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_GSO_SOFTWARE | NETIF_F_HIGHDMA | NETIF_F_SCTP_CRC | NETIF_F_ALL_FCOE; dev->features |= dev->hw_features; ... dev->wanted_features = dev->features & dev->hw_features; __netdev_update_features(dev); vlan_dev_fix_features ... Cc: Alexey Kuznetsov <kuznet@virtuozzo.com> Cc: Patrick McHardy <kaber@trash.net> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:Andrei Vagin <avagin@openvz.org> Signed-off-by:
-
Ezequiel Lara Gomez authored
Following checkpatch.pl recommendations (which include replacing with <linux/io.h> the <asm/io.h>, since linux/io.h includes it). Signed-off-by:
Ezequiel Lara Gomez <ezegomez@amazon.com> Signed-off-by:
-
Ezequiel Lara Gomez authored
This enables developing code that uses SOF_TIMESTAMPING_TX_SOFTWARE by using localhost addresses (without needing to send packets outside), as well as enabling unit and functional testing of TX timestamping code without needing hardware support or network access. It also fulfills the expectation of software network devices supporting software-based timestamping. Tested on qemu using txtimestamping.c from the kernel selftests, and ethtool -T. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-03-20 This series contains updates to i40e and i40evf only. Philippe Reynes updates i40e and i40evf to use the new ethtool API for {get|set}_link_ksettings. Jake provides the remaining patches in the series, starting with a fix for i40e where the firmware expected the port numbers for the offloaded UDP tunnels in Little Endian format and we were sending them in Big Endian format which put the wrong port number to be put in the UDP tunnel list. Changed the driver to use __be32 values instead of arrays for (src|dst)_ip. Refactored the exit flow of i40e_add_fdir_ethtool() which removes the dependency on having a non-zero return value. Fixed a memory leak by running kfree() and returning immediately when we fail to add flow director filter. Fixed a potential issue where could update the filter count without actually succeeding in adding a filter, by moving the ATR exit check to after we have sent the TCP/IPv4 filter to the ring successfully. Ensures that the fd_tcp_rule count is reset to 0, before we reprogram the filters so that we do not end up with a stale count which does not correctly reflect the number of programmed filters. Added a check whether we have TCP/IPv4 filters before re-enabling ATR after flushing and replaying FDIR filters. Added counters for each filter type in preparation for adding code to properly check the mask value. Fixed potential issues by explicitly checking the flow type at the start of i40e_add_fdir_ethtool(). To avoid possible memory leaks, we now unconditionally delete the old filter, even if it is identical to the new filter and ensures will always update the filters as expected. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree. A couple of new features for nf_tables, and unsorted cleanups and incremental updates for the Netfilter tree. More specifically, they are: 1) Allow to check for TCP option presence via nft_exthdr, patch from Phil Sutter. 2) Add symmetric hash support to nft_hash, from Laura Garcia Liebana. 3) Use pr_cont() in ebt_log, from Joe Perches. 4) Remove some dead code in arp_tables reported via static analysis tool, from Colin Ian King. 5) Consolidate nf_tables expression validation, from Liping Zhang. 6) Consolidate set lookup via nft_set_lookup(). 7) Remove unnecessary rcu read lock side in bridge netfilter, from Florian Westphal. 8) Remove unused variable in nf_reject_ipv4, from Tahee Yoo. 9) Pass nft_ctx struct to object initialization indirections, from Florian Westphal. 10) Add code to integrate conntrack helper into nf_tables, also from Florian. 11) Allow to check if interface index or name exists via NFTA_FIB_F_PRESENT, from Phil Sutter. 12) Simplify resolve_normal_ct(), from Florian. 13) Use per-limit spinlock in nft_limit and xt_limit, from Liping Zhang. 14) Use rwlock in nft_set_rbtree set, also from Liping Zhang. 15) One patch to remove a useless printk at netns init path in ipvs, and several patches to document IPVS knobs. 16) Use refcount_t for reference counter in the Netfilter/IPVS code, from Elena Reshetova. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2017-03-17 This series contains updates to mainly igb, with one fix for ixgbe. Alex does all the changes in the series, starting with adding support for DMA_ATTR_WEAK_ORDERING to improve performance on some platforms. Modified igb to use the length of the packet instead of the DD status bit to determine if a new descriptor is ready to be processed. Modified the driver to only go through the region in the receive ring that was designated to be cleaned up, instead of going through the entire ring on cleanup. Cleaned up the transmit side, by clearing the transmit buffer_info only when resetting the rings. Added a new upper limit for receive, which is based on the size of a 2K buffer minus padding, which will allow us to support build_skb going forward. Fixed ethtool testing to only sync on the size of the frame that is being tested, instead of the entire receive buffer. Updated the handling of page addresses to always use a void pointer with the consistent name of "va" to indicate that we are working with a virtual address. Added a "chicken bit" so that we can turn off the new receive allocation feature, in the case where we need to fallback to the legacy receive path. Added support for using 3K buffers in order 1 pages the same way we were using 2K buffers in 4K pages. Added support for padding packet, since we limit the size of the frame, we are able to write to an offset within the buffer instead of having to write at the very start of the buffer. This allows us to leaving padding room for things like supporting XDP in the future. Refactored the receive buffer page management, since there are 2-3 paths that can be taken depending on what receive modes are enabled, so to improve maintainability, break out the common bits into their own functions. Add support for build_skb, again. Lastly, fixed a typo in igb and ixgbe code comments. ==================== Signed-off-by:
-
- 20 Mar, 2017 9 commits
-
-
Jacob Keller authored
The previous code relied on i40e_match_fdir_input_set to determine when determining whether to free the old filter. Change this code so that we simply unconditionally delete the old filter, even if it's identical to the new filter. This ensures that we don't leak any memory, and that we always update the filters as expected. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Although we will fail the filter later due to checking flow_type which will have a bogus invalid type, it is possible future refactoring will remove this hidden failure case. Avoid a possible issue in the future by explicitly checking the flow type at the start. Change-Id: Ia98eb26f7b93ccbe38c7141e8f203ef496fc6598 Signed-off-by:
-
Jacob Keller authored
In preparation for adding code to properly check the mask values, we will need to know the number of active filters for each type. Add counters for each filter type. Rename the already existing fd_tcp_rule to fd_tcp4_filter_cnt to match the style of other names. To avoid style warnings, avoid assigning multiple parameters at once, and fix up one other case where we did so previously. Signed-off-by:
-
Jacob Keller authored
When flushing and replaying FDIR filters, it is possible we would disable ATR, and then re-enable it even though we should have kept it disabled due to existing TCP/IPv4 filters. Fix this by checking whether we have TCP4/IPv4 filters before re-enabling. Alternatively, we could instead restore ATR and then replay filters, however, this would cause us to rapidly enable and then disable ATR in some cases. Change-ID: I076e4cc1e4409bce7f98f3c213295433a4ff43d8 Signed-off-by:
Avinash Dayanand <avinash.dayanand@intel.com> Reviewed-by:
Alan Brady <alan.brady@intel.com> Reviewed-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Jacob Keller authored
Since we're about to reprogram the filters, we need to ensure that the fd_tcp_rule count is correctly reset to 0. Otherwise, we will keep a stale count that does not accurately reflect the number of programmed TCPv4 filters. Signed-off-by:
-
Jacob Keller authored
i40e_fdir_filter_restore re-adds all existing filters, which already checks when adding a TCPv4 filter to disable ATR. We don't need to make the check twice, so remove this redundant code. Change-ID: Ia0b0690e23523915199d601494557def135c9d7f Signed-off-by:
-
Jacob Keller authored
Move ATR exit check after we have sent the TCP/IPv4 filter to the ring successfully. This avoids an issue where we potentially update the filter count without actually succeeding in adding the filter. Now, we only increment the fd_tcp_rule after we've succeeded. Additionally, we will re-enable ATR mode only after deletion of the filter is actually posted to the FDIR ring. Change-ID: If5c1dea422081cc5e2de65618b01b4c3bf6bd586 Signed-off-by:
-
Jacob Keller authored
Instead of setting err=true and checking this to determine when to free the raw_packet near the end of the function, simply kfree and return immediately. The resulting code is a bit cleaner and has one less variable. This also resolves a subtle bug in the ipv4 case which could fail to add the first filter and then never free the memory, resulting in a small memory leak. Change-ID: I7583aac033481dc794b4acaa14445059c8930ff1 Signed-off-by:
-
Jacob Keller authored
Refactor the exit flow of the i40e_add_fdir_ethtool function. Move the input_label to the end of the function, removing the dependency on having a non-zero return value. Add a comment explaining why it is ok not to free the fdir data structure, because the structure is now stored in the fdir_filter_list. Change-Id: I723342181d59cd0c9f3b31140c37961ba37bb242 Signed-off-by:
-
