- 13 Aug, 2021 6 commits
-
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.14, take #2 - Plug race between enabling MTE and creating vcpus - Fix off-by-one bug when checking whether an address range is RAM
-
Sean Christopherson authored
Use vmx_need_pf_intercept() when determining if L0 wants to handle a #PF in L2 or if the VM-Exit should be forwarded to L1. The current logic fails to account for the case where #PF is intercepted to handle guest.MAXPHYADDR < host.MAXPHYADDR and ends up reflecting all #PFs into L1. At best, L1 will complain and inject the #PF back into L2. At worst, L1 will eat the unexpected fault and cause L2 to hang on infinite page faults. Note, while the bug was technically introduced by the commit that added support for the MAXPHYADDR madness, the shame is all on commit a0c13434 ("KVM: VMX: introduce vmx_need_pf_intercept"). Fixes: 1dbf5d68 ("KVM: VMX: Add guest physical address check in EPT violation and misconfig") Cc: stable@vger.kernel.org Cc: Peter Shier <pshier@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20210812045615.3167686-1-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Junaid Shahid authored
When a nested EPT violation/misconfig is injected into the guest, the shadow EPT PTEs associated with that address need to be synced. This is done by kvm_inject_emulated_page_fault() before it calls nested_ept_inject_page_fault(). However, that will only sync the shadow EPT PTE associated with the current L1 EPTP. Since the ASID is based on EP4TA rather than the full EPTP, so syncing the current EPTP is not enough. The SPTEs associated with any other L1 EPTPs in the prev_roots cache with the same EP4TA also need to be synced. Signed-off-by:
Junaid Shahid <junaids@google.com> Message-Id: <20210806222229.1645356-1-junaids@google.com> Signed-off-by:
-
Paolo Bonzini authored
Merge common topic branch for 5.14-rc6 and 5.15 merge window.
-
Paolo Bonzini authored
hv_vcpu is initialized again a dozen lines below, and at this point vcpu->arch.hyperv is not valid. Remove the initializer. Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
-
Sean Christopherson authored
Remove an ancient restriction that disallowed exposing EFER.NX to the guest if EFER.NX=0 on the host, even if NX is fully supported by the CPU. The motivation of the check, added by commit 2cc51560 ("KVM: VMX: Avoid saving and restoring msr_efer on lightweight vmexit"), was to rule out the case of host.EFER.NX=0 and guest.EFER.NX=1 so that KVM could run the guest with the host's EFER.NX and thus avoid context switching EFER if the only divergence was the NX bit. Fast forward to today, and KVM has long since stopped running the guest with the host's EFER.NX. Not only does KVM context switch EFER if host.EFER.NX=1 && guest.EFER.NX=0, KVM also forces host.EFER.NX=0 && guest.EFER.NX=1 when using shadow paging (to emulate SMEP). Furthermore, the entire motivation for the restriction was made obsolete over a decade ago when Intel added dedicated host and guest EFER fields in the VMCS (Nehalem timeframe), which reduced the overhead of context switching EFER from 400+ cycles (2 * WRMSR + 1 * RDMSR) to a mere ~2 cycles. In practice, the removed restriction only affects non-PAE 32-bit kernels, as EFER.NX is set during boot if NX is supported and the kernel will use PAE paging (32-bit or 64-bit), regardless of whether or not the kernel will actually use NX itself (mark PTEs non-executable). Alternatively and/or complementarily, startup_32_smp() in head_32.S could be modified to set EFER.NX=1 regardless of paging mode, thus eliminating the scenario where NX is supported but not enabled. However, that runs the risk of breaking non-KVM non-PAE kernels (though the risk is very, very low as there are no known EFER.NX errata), and also eliminates an easy-to-use mechanism for stressing KVM's handling of guest vs. host EFER across nested virtualization transitions. Suggested-by:
-
- 10 Aug, 2021 1 commit
-
-
Sean Christopherson authored
Use the secondary_exec_controls_get() accessor in vmx_has_waitpkg() to effectively get the controls for the current VMCS, as opposed to using vmx->secondary_exec_controls, which is the cached value of KVM's desired controls for vmcs01 and truly not reflective of any particular VMCS. While the waitpkg control is not dynamic, i.e. vmcs01 will always hold the same waitpkg configuration as vmx->secondary_exec_controls, the same does not hold true for vmcs02 if the L1 VMM hides the feature from L2. If L1 hides the feature _and_ does not intercept MSR_IA32_UMWAIT_CONTROL, L2 could incorrectly read/write L1's virtual MSR instead of taking a #GP. Fixes: 6e3ba4ab ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL") Cc: stable@vger.kernel.org Signed-off-by:
-
- 05 Aug, 2021 1 commit
-
-
Sean Christopherson authored
Take a signed 'long' instead of an 'unsigned long' for the number of pages to add/subtract to the total number of pages used by the MMU. This fixes a zero-extension bug on 32-bit kernels that effectively corrupts the per-cpu counter used by the shrinker. Per-cpu counters take a signed 64-bit value on both 32-bit and 64-bit kernels, whereas kvm_mod_used_mmu_pages() takes an unsigned long and thus an unsigned 32-bit value on 32-bit kernels. As a result, the value used to adjust the per-cpu counter is zero-extended (unsigned -> signed), not sign-extended (signed -> signed), and so KVM's intended -1 gets morphed to 4294967295 and effectively corrupts the counter. This was found by a staggering amount of sheer dumb luck when running kvm-unit-tests on a 32-bit KVM build. The shrinker just happened to kick in while running tests and do_shrink_slab() logged an error about trying to free a negative number of objects. The truly lucky part is that the kernel just happened to be a slightly stale build, as the shrinker no longer yells about negative objects as of commit 18bb473e ("mm: vmscan: shrink deferred objects proportional to priority"). vmscan: shrink_slab: mmu_shrink_scan+0x0/0x210 [kvm] negative objects to delete nr=-858993460 Fixes: bc8a3d89 ("kvm: mmu: Fix overflow on kvm mmu page limit calculation") Cc: stable@vger.kernel.org Cc: Ben Gardon <bgardon@google.com> Signed-off-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
-
- 04 Aug, 2021 4 commits
-
-
Maxim Levitsky authored
The test was mistakenly using addr_gpa2hva on a gva and that happened to work accidentally. Commit 106a2e76 ("KVM: selftests: Lower the min virtual address for misc page allocations") revealed this bug. Fixes: 2c7f76b4 ("selftests: kvm: Add basic Hyper-V clocksources tests", 2021-03-18) Signed-off-by:
Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210804112057.409498-1-mlevitsk@redhat.com> Signed-off-by:
-
Mingwei Zhang authored
KVM SEV code uses bitmaps to manage ASID states. ASID 0 was always skipped because it is never used by VM. Thus, in existing code, ASID value and its bitmap postion always has an 'offset-by-1' relationship. Both SEV and SEV-ES shares the ASID space, thus KVM uses a dynamic range [min_asid, max_asid] to handle SEV and SEV-ES ASIDs separately. Existing code mixes the usage of ASID value and its bitmap position by using the same variable called 'min_asid'. Fix the min_asid usage: ensure that its usage is consistent with its name; allocate extra size for ASID 0 to ensure that each ASID has the same value with its bitmap position. Add comments on ASID bitmap allocation to clarify the size change. Signed-off-by:
Mingwei Zhang <mizhang@google.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Marc Orr <marcorr@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Alper Gun <alpergun@google.com> Cc: Dionna Glaze <dionnaglaze@google.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Vipin Sharma <vipinsh@google.com> Cc: Peter Gonda <pgonda@google.com> Cc: Joerg Roedel <joro@8bytes.org> Message-Id: <20210802180903.159381-1-mizhang@google.com> [Fix up sev_asid_free to also index by ASID, as suggested by Sean Christopherson, and use nr_asids in sev_cpu_init. - Paolo] Signed-off-by:
-
Sean Christopherson authored
Use the raw ASID, not ASID-1, when nullifying the last used VMCB when freeing an SEV ASID. The consumer, pre_sev_run(), indexes the array by the raw ASID, thus KVM could get a false negative when checking for a different VMCB if KVM manages to reallocate the same ASID+VMCB combo for a new VM. Note, this cannot cause a functional issue _in the current code_, as pre_sev_run() also checks which pCPU last did VMRUN for the vCPU, and last_vmentry_cpu is initialized to -1 during vCPU creation, i.e. is guaranteed to mismatch on the first VMRUN. However, prior to commit 8a14fe4f ("kvm: x86: Move last_cpu into kvm_vcpu_arch as last_vmentry_cpu"), SVM tracked pCPU on its own and zero-initialized the last_cpu variable. Thus it's theoretically possible that older versions of KVM could miss a TLB flush if the first VMRUN is on pCPU0 and the ASID and VMCB exactly match those of a prior VM. Fixes: 70cd94e6 ("KVM: SVM: VMRUN should use associated ASID when SEV is enabled") Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Bonzini authored
KVM creates a debugfs directory for each VM in order to store statistics about the virtual machine. The directory name is built from the process pid and a VM fd. While generally unique, it is possible to keep a file descriptor alive in a way that causes duplicate directories, which manifests as these messages: [ 471.846235] debugfs: Directory '20245-4' with parent 'kvm' already present! Even though this should not happen in practice, it is more or less expected in the case of KVM for testcases that call KVM_CREATE_VM and close the resulting file descriptor repeatedly and in parallel. When this happens, debugfs_create_dir() returns an error but kvm_create_vm_debugfs() goes on to allocate stat data structs which are later leaked. The slow memory leak was spotted by syzkaller, where it caused OOM reports. Since the issue only affects debugfs, do a lookup before calling debugfs_create_dir, so that the message is downgraded and rate-limited. While at it, ensure kvm->debugfs_dentry is NULL rather than an error if it is not created. This fixes kvm_destroy_vm_debugfs, which was not checking IS_ERR_OR_NULL correctly. Cc: stable@vger.kernel.org Fixes: 536a6f88 ("KVM: Create debugfs dir and stat files for each VM") Reported-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Suggested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
-
- 03 Aug, 2021 4 commits
-
-
Vitaly Kuznetsov authored
Check that #UD is raised if bit 16 is clear in HYPERV_CPUID_FEATURES.EDX and an 'XMM fast' hypercall is issued. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Siddharth Chandrasekaran <sidcha@amazon.de> Signed-off-by:
-
Vitaly Kuznetsov authored
TLFS states that "Availability of the XMM fast hypercall interface is indicated via the “Hypervisor Feature Identification” CPUID Leaf (0x40000003, see section 2.4.4) ... Any attempt to use this interface when the hypervisor does not indicate availability will result in a #UD fault." Implement the check for 'strict' mode (KVM_CAP_HYPERV_ENFORCE_CPUID). Signed-off-by:
-
Vitaly Kuznetsov authored
Hypercall failures are unusual with potentially far going consequences so it would be useful to see their results when tracing. Signed-off-by:
-
Vitaly Kuznetsov authored
In case guest doesn't have access to the particular hypercall we can avoid reading XMM registers. Signed-off-by:
-
- 30 Jul, 2021 1 commit
-
-
Paolo Bonzini authored
Once an exception has been injected, any side effects related to the exception (such as setting CR2 or DR6) have been taked place. Therefore, once KVM sets the VM-entry interruption information field or the AMD EVENTINJ field, the next VM-entry must deliver that exception. Pending interrupts are processed after injected exceptions, so in theory it would not be a problem to use KVM_INTERRUPT when an injected exception is present. However, DOSEMU is using run->ready_for_interrupt_injection to detect interrupt windows and then using KVM_SET_SREGS/KVM_SET_REGS to inject the interrupt manually. For this to work, the interrupt window must be delayed after the completion of the previous event injection. Cc: stable@vger.kernel.org Reported-by:
Stas Sergeev <stsp2@yandex.ru> Tested-by:
-
- 29 Jul, 2021 2 commits
-
-
Steven Price authored
When enabling KVM_CAP_ARM_MTE the ioctl checks that there are no VCPUs created to ensure that the capability is enabled before the VM is running. However no locks are held at that point so it is (theoretically) possible for another thread in the VMM to create VCPUs between the check and actually setting mte_enabled. Close the race by taking kvm->lock. Reported-by:
Alexandru Elisei <alexandru.elisei@arm.com> Fixes: 673638f4 ("KVM: arm64: Expose KVM_ARM_CAP_MTE") Signed-off-by:
Steven Price <steven.price@arm.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210729160036.20433-1-steven.price@arm.com
-
David Brazdil authored
Hyp checks whether an address range only covers RAM by checking the start/endpoints against a list of memblock_region structs. However, the endpoint here is exclusive but internally is treated as inclusive. Fix the off-by-one error that caused valid address ranges to be rejected. Cc: Quentin Perret <qperret@google.com> Fixes: 90134ac9 ("KVM: arm64: Protect the .hyp sections from the host") Signed-off-by:
David Brazdil <dbrazdil@google.com> Signed-off-by:
-
- 27 Jul, 2021 10 commits
-
-
Paolo Bonzini authored
The arguments to the KVM_CLEAR_DIRTY_LOG ioctl include a pointer, therefore it needs a compat ioctl implementation. Otherwise, 32-bit userspace fails to invoke it on 64-bit kernels; for x86 it might work fine by chance if the padding is zero, but not on big-endian architectures. Reported-by: Thomas Sattler Cc: stable@vger.kernel.org Fixes: 2a31b9db ("kvm: introduce manual dirty log reprotect") Reviewed-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
-
Li RongQing authored
SMT siblings share caches and other hardware, and busy halt polling will degrade its sibling performance if its sibling is working Sean Christopherson suggested as below: "Rather than disallowing halt-polling entirely, on x86 it should be sufficient to simply have the hardware thread yield to its sibling(s) via PAUSE. It probably won't get back all performance, but I would expect it to be close. This compiles on all KVM architectures, and AFAICT the intended usage of cpu_relax() is identical for all architectures." Suggested-by:
Li RongQing <lirongqing@baidu.com> Message-Id: <20210727111247.55510-1-lirongqing@baidu.com> Signed-off-by:
-
Maxim Levitsky authored
Currently when SVM is enabled in guest CPUID, AVIC is inhibited as soon as the guest CPUID is set. AVIC happens to be fully disabled on all vCPUs by the time any guest entry starts (if after migration the entry can be nested). The reason is that currently we disable avic right away on vCPU from which the kvm_request_apicv_update was called and for this case, it happens to be called on all vCPUs (by svm_vcpu_after_set_cpuid). After we stop doing this, AVIC will end up being disabled only when KVM_REQ_APICV_UPDATE is processed which is after we done switching to the nested guest. Fix this by just using vmcb01 in svm_refresh_apicv_exec_ctrl for avic (which is a right thing to do anyway). Signed-off-by:
-
Maxim Levitsky authored
It is possible that AVIC was requested to be disabled but not yet disabled, e.g if the nested entry is done right after svm_vcpu_after_set_cpuid. Signed-off-by:
-
Maxim Levitsky authored
It is possible for AVIC inhibit and AVIC active state to be mismatched. Currently we disable AVIC right away on vCPU which started the AVIC inhibit request thus this warning doesn't trigger but at least in theory, if svm_set_vintr is called at the same time on multiple vCPUs, the warning can happen. Signed-off-by:
-
Christian Borntraeger authored
commit bc9e9e67 ("KVM: debugfs: Reuse binary stats descriptors") did replace the old definitions with the binary ones. While doing that it missed that some files are names different than the counters. This is especially important for kvm_stat which does have special handling for counters named instruction_*. Fixes: commit bc9e9e67 ("KVM: debugfs: Reuse binary stats descriptors") CC: Jing Zhang <jingzhangos@google.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20210726150108.5603-1-borntraeger@de.ibm.com> Signed-off-by:
-
Paolo Bonzini authored
Right now, svm_hv_vmcb_dirty_nested_enlightenments has an incorrect dereference of vmcb->control.reserved_sw before the vmcb is checked for being non-NULL. The compiler is usually sinking the dereference after the check; instead of doing this ourselves in the source, ensure that svm_hv_vmcb_dirty_nested_enlightenments is only called with a non-NULL VMCB. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Vineeth Pillai <viremana@linux.microsoft.com> Signed-off-by:
-
David Matlack authored
This test measures the performance effects of KVM's access tracking. Access tracking is driven by the MMU notifiers test_young, clear_young, and clear_flush_young. These notifiers do not have a direct userspace API, however the clear_young notifier can be triggered by marking a pages as idle in /sys/kernel/mm/page_idle/bitmap. This test leverages that mechanism to enable access tracking on guest memory. To measure performance this test runs a VM with a configurable number of vCPUs that each touch every page in disjoint regions of memory. Performance is measured in the time it takes all vCPUs to finish touching their predefined region. Example invocation: $ ./access_tracking_perf_test -v 8 Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages guest physical test memory offset: 0xffdfffff000 Populating memory : 1.337752570s Writing to populated memory : 0.010177640s Reading from populated memory : 0.009548239s Mark memory idle : 23.973131748s Writing to idle memory : 0.063584496s Mark memory idle : 24.924652964s Reading from idle memory : 0.062042814s Breaking down the results: * "Populating memory": The time it takes for all vCPUs to perform the first write to every page in their region. * "Writing to populated memory" / "Reading from populated memory": The time it takes for all vCPUs to write and read to every page in their region after it has been populated. This serves as a control for the later results. * "Mark memory idle": The time it takes for every vCPU to mark every page in their region as idle through page_idle. * "Writing to idle memory" / "Reading from idle memory": The time it takes for all vCPUs to write and read to every page in their region after it has been marked idle. This test should be portable across architectures but it is only enabled for x86_64 since that's all I have tested. Reviewed-by:
Ben Gardon <bgardon@google.com> Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20210713220957.3493520-7-dmatlack@google.com> Signed-off-by:
-
David Matlack authored
There is a missing break statement which causes a fallthrough to the next statement where optarg will be null and a segmentation fault will be generated. Fixes: 9e965bb7 ("KVM: selftests: Add backing src parameter to dirty_log_perf_test") Reviewed-by:
-
Juergen Gross authored
KVM_MAX_VCPU_ID is the maximum vcpu-id of a guest, and not the number of vcpu-ids. Fix array indexed by vcpu-id to have KVM_MAX_VCPU_ID+1 elements. Note that this is currently no real problem, as KVM_MAX_VCPU_ID is an odd number, resulting in always enough padding being available at the end of those arrays. Nevertheless this should be fixed in order to avoid rare problems in case someone is using an even number for KVM_MAX_VCPU_ID. Signed-off-by:
Juergen Gross <jgross@suse.com> Message-Id: <20210701154105.23215-2-jgross@suse.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- 26 Jul, 2021 5 commits
-
-
Vitaly Kuznetsov authored
MSR_KVM_ASYNC_PF_ACK MSR is part of interrupt based asynchronous page fault interface and not the original (deprecated) KVM_FEATURE_ASYNC_PF. This is stated in Documentation/virt/kvm/msr.rst. Fixes: 66570e96 ("kvm: x86: only provide PV features if enabled in guest's CPUID") Signed-off-by:
Oliver Upton <oupton@google.com> Message-Id: <20210722123018.260035-1-vkuznets@redhat.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST conversion and some cut-and-pasted text contain some characters that aren't easily reachable on standard keyboards and/or could cause troubles when parsed by the documentation build system. Replace the occurences of the following characters: - U+00a0 (' '): NO-BREAK SPACE as it can cause lines being truncated on PDF output Signed-off-by:Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Message-Id: <ff70cb42d63f3a1da66af1b21b8d038418ed5189.1626947264.git.mchehab+huawei@kernel.org> Signed-off-by:
-
Vitaly Kuznetsov authored
'KVM_CAP_ENFORCE_PV_CPUID' doesn't match the define in include/uapi/linux/kvm.h. Signed-off-by:
-
Vitaly Kuznetsov authored
Make svm_copy_vmrun_state()/svm_copy_vmloadsave_state() interface match 'memcpy(dest, src)' to avoid any confusion. No functional change intended. Suggested-by:
-
Vitaly Kuznetsov authored
To match svm_copy_vmrun_state(), rename nested_svm_vmloadsave() to svm_copy_vmloadsave_state(). Opportunistically add missing braces to 'else' branch in vmload_vmsave_interception(). No functional change intended. Suggested-by:
-
- 19 Jul, 2021 1 commit
-
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.14, take #1 - Fix MTE shared page detection - Fix selftest use of obsolete pthread_yield() in favour of sched_yield() - Enable selftest's use of PMU registers when asked to
-
- 18 Jul, 2021 5 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs are offlined. - Fix 'perf test' problems related to the recently added hybrid (BIG/little) code. - Split ARM's coresight (hw tracing) decode by aux records to avoid fatal decoding errors. - Fix add event failure in 'perf probe' when running 32-bit perf in a 64-bit kernel. - Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set. - Fix memory and refcount leaks detected by ASAn when running 'perf test', should be clean of warnings now. - Remove broken definition of __LITTLE_ENDIAN from tools' linux/kconfig.h, which was breaking the build in some systems. - Cast PTHREAD_STACK_MIN to int as it may turn into 'long sysconf(__SC_THREAD_STACK_MIN_VALUE), breaking the build in some systems. - Fix libperf build error with LIBPFM4=1. - Sync UAPI files changed by the memfd_secret new syscall. * tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (35 commits) perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel perf data: Close all files in close_dir() perf probe-file: Delete namelist in del_events() on the error path perf test bpf: Free obj_buf perf trace: Free strings in trace__parse_events_option() perf trace: Free syscall tp fields in evsel->priv perf trace: Free syscall->arg_fmt perf trace: Free malloc'd trace fields on exit perf lzma: Close lzma stream on exit perf script: Fix memory 'threads' and 'cpus' leaks on exit perf script: Release zstd data perf session: Cleanup trace_event perf inject: Close inject.output on exit perf report: Free generated help strings for sort option perf env: Fix memory leak of cpu_pmu_caps perf test maps__merge_in: Fix memory leak of maps perf dso: Fix memory leak in dso__new_map() perf test event_update: Fix memory leak of unit perf test event_update: Fix memory leak of evlist ...
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "A few fixes for issues in the new online shrink code, additional corrections for my recent bug-hunt w.r.t. extent size hints on realtime, and improved input checking of the GROWFSRT ioctl. IOW, the usual 'I somehow got bored during the merge window and resumed auditing the farther reaches of xfs': - Fix shrink eligibility checking when sparse inode clusters enabled - Reset '..' directory entries when unlinking directories to prevent verifier errors if fs is shrinked later - Don't report unusable extent size hints to FSGETXATTR - Don't warn when extent size hints are unusable because the sysadmin configured them that way - Fix insufficient parameter validation in GROWFSRT ioctl - Fix integer overflow when adding rt volumes to filesystem" * tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: detect misaligned rtinherit directory extent size hints xfs: fix an integer overflow error in xfs_growfs_rt xfs: improve FSGROWFSRT precondition checking xfs: don't expose misaligned extszinherit hints to userspace xfs: correct the narrative around misaligned rtinherit/extszinherit dirs xfs: reset child dir '..' entry when unlinking child xfs: check for sparse inode clusters that cross new EOAG when shrinking -
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull iomap fixes from Darrick Wong: "A handful of bugfixes for the iomap code. There's nothing especially exciting here, just fixes for UBSAN (not KASAN as I erroneously wrote in the tag message) warnings about undefined behavior in the SEEK_DATA/SEEK_HOLE code, and some reshuffling of per-page block state info to fix some problems with gfs2. - Fix KASAN warnings due to integer overflow in SEEK_DATA/SEEK_HOLE - Fix assertion errors when using inlinedata files on gfs2" * tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: Don't create iomap_page objects in iomap_page_mkwrite_actor iomap: Don't create iomap_page objects for inline files iomap: Permit pages without an iop to enter writeback iomap: remove the length variable in iomap_seek_hole iomap: remove the length variable in iomap_seek_data
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Restore the original behavior of scripts/setlocalversion when LOCALVERSION is set to empty. - Show Kconfig prompts even for 'make -s' - Fix the combination of COFNIG_LTO_CLANG=y and CONFIG_MODVERSIONS=y for older GNU Make versions * tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Documentation: Fix intiramfs script name Kbuild: lto: fix module versionings mismatch in GNU make 3.X kbuild: do not suppress Kconfig prompts for silent build scripts/setlocalversion: fix a bug when LOCALVERSION is empty
-
