RPL code has a pattern where skb_dst_drop() is called before
ip6_route_input().

However, ip6_route_input() calls skb_dst_drop() internally,
so we need not call skb_dst_drop() before ip6_route_input().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230710213511.5364-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Petr Machata says:

====================
mlxsw: Add port range matching support

Ido Schimmel writes:

Add port range matching support in mlxsw as part of tc-flower offload.

Patches #1-#7 gradually add port range matching support in mlxsw. See
patch #3 to understand how port range matching is implemented in the
device.

Patches #8-#10 add selftests.
====================

Link: https://lore.kernel.org/r/cover.1689092769.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add test cases to verify that flower port range matching works
correctly. Test both source and destination port ranges, with different
combinations of IPv4/IPv6 and TCP/UDP, on both ingress and egress.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/9d47c9cd4522b2d335b13ce8f6c9b33199298cee.1689092769.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Test that filters that match on the same port range, but with different
combination of IPv4/IPv6 and TCP/UDP all use the same port range
register by observing port range registers' occupancy via
devlink-resource.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/0a2eb63b234fb062ff011e80231868cc80000c81.1689092769.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Query the maximum number of supported port range registers using
devlink-resource and test that this number can be reached by configuring
tc filters with different port ranges. Test that an error is returned in
case the maximum number is exceeded.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/48eee181270d9f291e09d1858c7b26a3f7fcc164.1689092769.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add the ability to match on port ranges by utilizing the previously
added port range registers and the port range key element. Up to two
port range registers can be used for each filter, one for source port
and another for destination port.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/df4385a9592917e9a22ebff339e0463e4a8dfa82.1689092769.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The main driver structure will be needed in this function by a
subsequent patch, so pass it. No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/24d96a4e21310e5de2951ace58263db35e44a0df.1689092769.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add the port range key element to supported key blocks so that it could
be used to match on the output of the port range registers. Each bit in
the element can be used to match on the output of the port range
register with the corresponding index.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/f0423f6ee9e36c6b0a426bc9995f42223c48f2db.1689092769.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Expose via devlink-resource the maximum number of port range registers
and their current occupancy. Besides the observability benefits, this
resource will be used by subsequent patches for scale and occupancy
tests.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/7945e0c715dc5efb1617f45f7560c1f1bd0bcf8a.1689092769.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The Spectrum ASICs have a fixed number of port range registers, each of
which maintains the following parameters:

* Minimum and maximum port.
* Apply port range for source port, destination port or both.
* Apply port range for TCP, UDP or both.
* Apply port range for IPv4, IPv6 or both.

Implement a port range core which takes care of the allocation and
configuration of these registers and exposes an API that allows
in-driver consumers (e.g., the ACL code) to request matching on a range
of either source or destination port.

These registers are going to be used for port range matching in the
flower classifier that already matches on EtherType being IPv4 / IPv6 and
IP protocol being TCP / UDP. As such, there is no need to limit these
registers to a specific EtherType or IP protocol, which will increase
the likelihood of a register being shared by multiple flower filters.

It is unlikely that a filter will match on the same range of both source
and destination ports, which is why each register is only configured to
match on either source or destination port. If a filter requires
matching on a range of both source and destination ports, it will
utilize two port range registers and match on the output of both.

For efficient lookup and traversal, use XArray to store the allocated
port range registers. The XArray uses RCU and an internal spinlock to
synchronise access, so there is no need for a dedicate lock.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/674f00539a0072d455847663b5feb504db51a259.1689092769.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add a resource identifier for maximum number of layer 4 port range
register so that it could be later used to query the information from
firmware.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/59a8fec353d5ad9fbfb7612e4a7ff61eaedad445.1689092769.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add the Policy-Engine Port Range Register that is used for configuring
port range identification.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/d1a1f53d758f7452cf5abfe006b23496076ec3e6.1689092769.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kubernetes[1] is going to stick with /proc/net/tcp for a while.

This commit reduces the scheduling latency introduced by
established_get_first(), similar to commit acffb584 ("net: diag:
add a scheduling point in inet_diag_dump_icsk()").

In our environment, the scheduling latency affects the performance of
latency-sensitive services like Redis.

Changes in V2 :
 - call cond_resched() before checking if a bucket is empty as
   suggested by Eric Dumazet
 - removed the delay of synchronize_net() from the commit message

[1] https://github.com/google/cadvisor/blob/v0.47.2/container/libcontainer/handler.go#L130Signed-off-by: Jian Wen <wenjian1@xiaomi.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230711032405.3253025-1-wenjian1@xiaomi.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Andrew Halaney says:

====================
net: stmmac: dwmac-qcom-ethqos: Improve error handling

This series includes some very minor quality of life patches in the
error handling.

I recently ran into a few issues where these patches would have made my
life easier (messing with the devicetree, dependent driver of this
failing, and incorrect kernel configs resulting in this driver not
probing).

v1: https://lore.kernel.org/netdev/20230629191725.1434142-1-ahalaney@redhat.com/
Changes since v1:
    * Collect tags (Andrew Lunn)
    * Switch to of_get_phy_mode() (Andrew Lunn)
    * Follow netdev patch submission process (net-next subject, wait
      until merge window is open) (Simon)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

These are useful to see when debugging a probe failure.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using dev_err_probe() logs to devices_deferred which is helpful
when debugging.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since this driver only uses devicetree, let's move over to
of_get_phy_mode(). That API has an explicit error return and produces a
phy_interface_t directly instead of an int when representing the phy
mode.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace dev_kfree_skb_any() with dev_consume_skb_any() in bnxt_tx_int()
to clear the unnecessary noise of "kfree_skb" event.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230710094747.943782-1-imagedong@tencent.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Uwe Kleine-König says:

====================
net: freescale: Convert to platform remove callback returning void

v2 of this series was sent in June[1], code changes since then only affect
patch #1 where the dev_err invocation was adapted to emit the error code of
dpaa_fq_free(). Thanks for feedback by Maciej Fijalkowski and Russell King.
Other than that I added Reviewed-by tags for Simon Horman and Wei Fang and
rebased to v6.5-rc1.

There is only one dependency in this series: Patch #2 depends on patch

[1] https://lore.kernel.org/netdev/20230606162829.166226-1-u.kleine-koenig@pengutronix.de
====================

Link: https://lore.kernel.org/r/20230710071946.3470249-1-u.kleine-koenig@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230710071946.3470249-9-u.kleine-koenig@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230710071946.3470249-8-u.kleine-koenig@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230710071946.3470249-7-u.kleine-koenig@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230710071946.3470249-6-u.kleine-koenig@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230710071946.3470249-5-u.kleine-koenig@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230710071946.3470249-4-u.kleine-koenig@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230710071946.3470249-3-u.kleine-koenig@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of the generic error message emitted by the driver core when a
remove callback returns an error code ("remove callback returned a
non-zero value. This will be ignored."), emit a message describing the
actual problem and return zero to suppress the generic message.

Note that apart from suppressing the generic error message there are no
side effects by changing the return value to zero. This prepares
changing the remove callback to return void.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230710071946.3470249-2-u.kleine-koenig@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We have for some time the __assign_bit() API to replace open coded

	if (foo)
		__set_bit(n, bar);
	else
		__clear_bit(n, bar);

Use this API in the code. No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Message-ID: <20230710100830.89936-2-andriy.shevchenko@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

We have for some time the assign_bit() API to replace open coded

	if (foo)
		set_bit(n, bar);
	else
		clear_bit(n, bar);

Use this API in the code. No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Message-ID: <20230710100830.89936-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, bpf and wireguard.

  Current release - regressions:

   - nvme-tcp: fix comma-related oops after sendpage changes

  Current release - new code bugs:

   - ptp: make max_phase_adjustment sysfs device attribute invisible
     when not supported

  Previous releases - regressions:

   - sctp: fix potential deadlock on &net->sctp.addr_wq_lock

   - mptcp:
      - ensure subflow is unhashed before cleaning the backlog
      - do not rely on implicit state check in mptcp_listen()

  Previous releases - always broken:

   - net: fix net_dev_start_xmit trace event vs skb_transport_offset()

   - Bluetooth:
      - fix use-bdaddr-property quirk
      - L2CAP: fix multiple UaFs
      - ISO: use hci_sync for setting CIG parameters
      - hci_event: fix Set CIG Parameters error status handling
      - hci_event: fix parsing of CIS Established Event
      - MGMT: fix marking SCAN_RSP as not connectable

   - wireguard: queuing: use saner cpu selection wrapping

   - sched: act_ipt: various bug fixes for iptables <> TC interactions

   - sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX

   - dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging

   - eth: sfc: fix null-deref in devlink port without MAE access

   - eth: ibmvnic: do not reset dql stats on NON_FATAL err

  Misc:

   - xsk: honor SO_BINDTODEVICE on bind"

* tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
  nfp: clean mc addresses in application firmware when closing port
  selftests: mptcp: pm_nl_ctl: fix 32-bit support
  selftests: mptcp: depend on SYN_COOKIES
  selftests: mptcp: userspace_pm: report errors with 'remove' tests
  selftests: mptcp: userspace_pm: use correct server port
  selftests: mptcp: sockopt: return error if wrong mark
  selftests: mptcp: sockopt: use 'iptables-legacy' if available
  selftests: mptcp: connect: fail if nft supposed to work
  mptcp: do not rely on implicit state check in mptcp_listen()
  mptcp: ensure subflow is unhashed before cleaning the backlog
  s390/qeth: Fix vipa deletion
  octeontx-af: fix hardware timestamp configuration
  net: dsa: sja1105: always enable the send_meta options
  net: dsa: tag_sja1105: fix MAC DA patching from meta frames
  net: Replace strlcpy with strscpy
  pptp: Fix fib lookup calls.
  mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check
  net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX
  xsk: Honor SO_BINDTODEVICE on bind
  ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported
  ...

Pull f2fs updates from Jaegeuk Kim:
 "In this cycle, we've mainly investigated the zoned block device
  support along with patches such as correcting write pointers between
  f2fs and storage, adding asynchronous zone reset flow, and managing
  the number of open zones.

  Other than them, f2fs adds another mount option, "errors=x" to specify
  how to handle when it detects an unexpected behavior at runtime.

  Enhancements:
   - support 'errors=remount-ro|continue|panic' mount option
   - enforce some inode flag policies
   - allow .tmp compression given extensions
   - add some ioctls to manage the f2fs compression
   - improve looped node chain flow
   - avoid issuing small-sized discard commands during checkpoint
   - implement an asynchronous zone reset

  Bug fixes:
   - fix deadlock in xattr and inode page lock
   - fix and add sanity check in some error paths
   - fix to avoid NULL pointer dereference f2fs_write_end_io() along
     with put_super
   - set proper flags to quota files
   - fix potential deadlock due to unpaired node_write lock use
   - fix over-estimating free section during FG GC
   - fix the wrong condition to determine atomic context

  As usual, also there are a number of patches with code refactoring and
  minor clean-ups"

* tag 'f2fs-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (46 commits)
  f2fs: fix to do sanity check on direct node in truncate_dnode()
  f2fs: only set release for file that has compressed data
  f2fs: fix compile warning in f2fs_destroy_node_manager()
  f2fs: fix error path handling in truncate_dnode()
  f2fs: fix deadlock in i_xattr_sem and inode page lock
  f2fs: remove unneeded page uptodate check/set
  f2fs: update mtime and ctime in move file range method
  f2fs: compress tmp files given extension
  f2fs: refactor struct f2fs_attr macro
  f2fs: convert to use sbi directly
  f2fs: remove redundant assignment to variable err
  f2fs: do not issue small discard commands during checkpoint
  f2fs: check zone write pointer points to the end of zone
  f2fs: add f2fs_ioc_get_compress_blocks
  f2fs: cleanup MIN_INLINE_XATTR_SIZE
  f2fs: add helper to check compression level
  f2fs: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
  f2fs: do more sanity check on inode
  f2fs: compress: fix to check validity of i_compress_flag field
  f2fs: add sanity compress level check for compressed file
  ...

Pull more xfs updates from Darrick Wong:

 - Fix some ordering problems with log items during log recovery

 - Don't deadlock the system by trying to flush busy freed extents while
   holding on to busy freed extents

 - Improve validation of log geometry parameters when reading the
   primary superblock

 - Validate the length field in the AGF header

 - Fix recordset filtering bugs when re-calling GETFSMAP to return more
   results when the resultset didn't previously fit in the caller's
   buffer

 - Fix integer overflows in GETFSMAP when working with rt volumes larger
   than 2^32 fsblocks

 - Fix GETFSMAP reporting the undefined space beyond the last rtextent

 - Fix filtering bugs in GETFSMAP's log device backend if the log ever
   becomes longer than 2^32 fsblocks

 - Improve validation of file offsets in the GETFSMAP range parameters

 - Fix an off by one bug in the pmem media failure notification
   computation

 - Validate the length field in the AGI header too

* tag 'xfs-6.5-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: Remove unneeded semicolon
  xfs: AGI length should be bounds checked
  xfs: fix the calculation for "end" and "length"
  xfs: fix xfs_btree_query_range callers to initialize btree rec fully
  xfs: validate fsmap offsets specified in the query keys
  xfs: fix logdev fsmap query result filtering
  xfs: clean up the rtbitmap fsmap backend
  xfs: fix getfsmap reporting past the last rt extent
  xfs: fix integer overflows in the fsmap rtbitmap and logdev backends
  xfs: fix interval filtering in multi-step fsmap queries
  xfs: fix bounds check in xfs_defer_agfl_block()
  xfs: AGF length has never been bounds checked
  xfs: journal geometry is not properly bounds checked
  xfs: don't block in busy flushing when freeing extents
  xfs: allow extent free intents to be retried
  xfs: pass alloc flags through to xfs_extent_busy_flush()
  xfs: use deferred frees for btree block freeing
  xfs: don't reverse order of items in bulk AIL insertion
  xfs: remove redundant initializations of pointers drop_leaf and save_leaf

Merge tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "There's a little bit of everything in here: we've got various
  improvements and cleanups to drivers, some fixes across the board and
  a bit of new hardware support"

* tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (22 commits)
  dt-bindings: pwm: convert pwm-bcm2835 bindings to YAML
  pwm: Add Renesas RZ/G2L MTU3a PWM driver
  pwm: mtk_disp: Fix the disable flow of disp_pwm
  dt-bindings: pwm: restrict node name suffixes
  pwm: pca9685: Switch i2c driver back to use .probe()
  pwm: ab8500: Fix error code in probe()
  MAINTAINERS: add pwm to PolarFire SoC entry
  pwm: add microchip soft ip corePWM driver
  pwm: sysfs: Do not apply state to already disabled PWMs
  pwm: imx-tpm: force 'real_period' to be zero in suspend
  pwm: meson: make full use of common clock framework
  pwm: meson: don't use hdmi/video clock as mux parent
  pwm: meson: switch to using struct clk_parent_data for mux parents
  pwm: meson: remove not needed check in meson_pwm_calc
  pwm: meson: fix handling of period/duty if greater than UINT_MAX
  pwm: meson: modify and simplify calculation in meson_pwm_get_state
  dt-bindings: pwm: Add R-Car V3U device tree bindings
  dt-bindings: pwm: imx: add i.MX8QXP compatible
  pwm: mediatek: Add support for MT7981
  dt-bindings: pwm: mediatek: Add mediatek,mt7981 compatible
  ...

Pull more devicetree updates from Rob Herring:

 - Whitespace clean-ups in binding examples

 - Restrict node name suffixes to "-[0-9]+" for cases of multiple
   instances which don't have unit-addresses

 - Convert brcm,kona-wdt and cdns,wdt-r1p2 watchdog bindings to DT
   schema

* tag 'devicetree-for-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: soc: qcom: stats: Update maintainer email
  dt-bindings: cleanup DTS example whitespaces
  dt-bindings: timestamp: restrict node name suffixes
  dt-bindings: slimbus: restrict node name suffixes
  dt-bindings: watchdog: restrict node name suffixes
  dt-bindings: watchdog: brcm,kona-wdt: convert txt file to yaml
  dt-bindings: watchdog: cdns,wdt-r1p2: Convert cadence watchdog to yaml

When moving devices from one namespace to another, mc addresses are
cleaned in software while not removed from application firmware. Thus
the mc addresses are remained and will cause resource leak.

Now use `__dev_mc_unsync` to clean mc addresses when closing port.

Fixes: e20aa071 ("nfp: fix schedule in atomic context when sync mc address")
Cc: stable@vger.kernel.org
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Message-ID: <20230705052818.7122-1-louis.peens@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2023-07-05

We've added 2 non-merge commits during the last 1 day(s) which contain
a total of 3 files changed, 16 insertions(+), 4 deletions(-).

The main changes are:

1) Fix BTF to warn but not returning an error for a NULL BTF to still be
   able to load modules under CONFIG_DEBUG_INFO_BTF, from SeongJae Park.

2) Fix xsk sockets to honor SO_BINDTODEVICE in bind(), from Ilya Maximets.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  xsk: Honor SO_BINDTODEVICE on bind
  bpf, btf: Warn but return no error for NULL btf from __register_btf_kfunc_id_set()
====================

Link: https://lore.kernel.org/r/20230705171716.6494-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull soundwire updates from Vinod Koul:

 - Stream handling and slave alert handling

 - Qualcomm Soundwire v2.0.0 controller support

 - Intel ACE2.x initial support and code reorganization

* tag 'soundwire-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (55 commits)
  soundwire: stream: Make master_list ordered to prevent deadlocks
  soundwire: bus: Prevent lockdep asserts when stream has multiple buses
  soundwire: qcom: fix storing port config out-of-bounds
  soundwire: intel_ace2x: fix SND_SOC_SOF_HDA_MLINK dependency
  soundwire: debugfs: Add missing SCP registers
  soundwire: stream: Remove unnecessary gotos
  soundwire: stream: Invert logic on runtime alloc flags
  soundwire: stream: Remove unneeded checks for NULL bus
  soundwire: bandwidth allocation: Remove pointless variable
  soundwire: cadence: revisit parity injection
  soundwire: intel/cadence: update hardware reset sequence
  soundwire: intel_bus_common: enable interrupts last
  soundwire: intel_bus_common: update error log
  soundwire: amd: Improve error message in remove callback
  soundwire: debugfs: fix unbalanced pm_runtime_put()
  soundwire: qcom: fix unbalanced pm_runtime_put()
  soundwire: qcom: set clk stop need reset flag at runtime
  soundwire: qcom: add software workaround for bus clash interrupt assertion
  soundwire: qcom: wait for fifo to be empty before suspend
  soundwire: qcom: drop unused struct qcom_swrm_ctrl members
  ...

Pull media updates from Mauro Carvalho Chehab:

 - Lots of improvement at atomisp driver, which is starting to look in
   good shape

 - Mediatek vcodec driver has gained support for av1 and hevc stateless
   codecs

 - New sensor driver: ov01a10

 - verisilicon driver has gained AV1 entropy helpers

 - tegra-video has gained support for Tegra20 parallel input

 - dvb core has gained an extra property to better support DVB-S2X

 - as usual, lots of cleanups, fixes and improvements on media drivers

* tag 'media/v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (253 commits)
  media: wl128x: fix a clang warning
  media: dvb: mb86a20s: get rid of a clang-15 warning
  media: cec: i2c: ch7322: also select REGMAP
  media: add HAS_IOPORT dependencies
  media: tc358746: select CONFIG_GENERIC_PHY
  media: mediatek: vcodec: Add dbgfs help function
  media: mediatek: vcodec: Add encode to support dbgfs
  media: mediatek: vcodec: Change dbgfs interface to support encode
  media: mediatek: vcodec: Get each instance format type
  media: mediatek: vcodec: Get each context resolution information
  media: mediatek: vcodec: Add a debugfs file to get different useful information
  media: mediatek: vcodec: Add debug params to control different log level
  media: mediatek: vcodec: Add debugfs interface to get debug information
  media: mediatek: vcodec: support stateless AV1 decoder
  media: verisilicon: Conditionally ignore native formats
  media: verisilicon: Enable AV1 decoder on rk3588
  media: verisilicon: Add film grain feature to AV1 driver
  media: verisilicon: Add Rockchip AV1 decoder
  media: verisilicon: Add AV1 entropy helpers
  media: verisilicon: Compute motion vectors size for AV1 frames
  ...

Pull tracing tooling updates from Steven Rostedt:

 - Add cgroup support for rtla via the -C option

 - Add --house-keeping option that tells rtla where to place the
   housekeeping threads

 - Have rtla/timerlat have its own tracing instance instead of using the
   top level tracing instance that is the default for other tracing
   users to use

 - Add auto analysis to timerlat_hist

 - Have rtla start the tracers after creating the instances

 - Reduce rtla hwnoise down to 75% from 100% as it runs with preemption
   disabled and can cause system instability at 100%

 - Add support to run timerlat_top and timerlat_hist threads in
   user-space instead of just using the kernel tasks

 - Some minor clean ups and documentation changes

* tag 'trace-tools-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  Documentation: Add tools/rtla timerlat -u option documentation
  rtla/timerlat_hist: Add timerlat user-space support
  rtla/timerlat_top: Add timerlat user-space support
  rtla/hwnoise: Reduce runtime to 75%
  rtla: Start the tracers after creating all instances
  rtla/timerlat_hist: Add auto-analysis support
  rtla/timerlat: Give timerlat auto analysis its own instance
  rtla: Automatically move rtla to a house-keeping cpu
  rtla: Change monitored_cpus from char * to cpu_set_t
  rtla: Add --house-keeping option
  rtla: Add -C cgroup support

Merge tag 'parisc-for-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull more parisc architecture updates from Helge Deller:

 -  Fix all compiler warnings in arch/parisc and drivers/parisc when
    compiled with W=1

* tag 'parisc-for-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: syscalls: Avoid compiler warnings with W=1
  parisc: math-emu: Avoid compiler warnings with W=1
  parisc: Raise minimal GCC version to 12.0.0
  parisc: unwind: Avoid missing prototype warning for handle_interruption()
  parisc: smp: Add declaration for start_cpu_itimer()
  parisc: pdt: Get prototype for arch_report_meminfo()