- 02 Jan, 2014 5 commits
-
-
Olof Johansson authored
Merge tag 'renesas-soc3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc From Simon Horman: Third Round of Renesas ARM Based SoC Updates for v3.14 * Global - Don't set plat_sci_port scbrr_algo_id field - Declare SCIF register base and IRQ as resources - Don't define SCIF platform data in an array - Use macros to declare SCIF devices * r7s72100 SoC (RZ/A1H) - Add i2c clocks * r8a7778 (R-Car M1) - Add sound SCU clock support * tag 'renesas-soc3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (43 commits) arm: shmobile: r7s72100: add i2c clocks ARM: shmobile: r8a7791: Don't set plat_sci_port scbrr_algo_id field ARM: shmobile: r8a7779: Don't set plat_sci_port scbrr_algo_id field ARM: shmobile: r8a7790: Don't set plat_sci_port scbrr_algo_id field ARM: shmobile: r8a7740: Don't set plat_sci_port scbrr_algo_id field ARM: shmobile: r8a73a4: Don't set plat_sci_port scbrr_algo_id field ARM: shmobile: r8a7778: Don't set plat_sci_port scbrr_algo_id field ARM: shmobile: r7s72100: Don't set plat_sci_port scbrr_algo_id field ARM: shmobile: sh73a0: Don't set plat_sci_port scbrr_algo_id field ARM: shmobile: r8a7790: Declare SCIF register base and IRQ as resources ARM: shmobile: r8a7791: Declare SCIF register base and IRQ as resources ARM: shmobile: r8a7778: Declare SCIF register base and IRQ as resources ARM: shmobile: sh7372: Don't set plat_sci_port scbrr_algo_id field ARM: shmobile: r8a7779: Declare SCIF register base and IRQ as resources ARM: shmobile: r8a7740: Declare SCIF register base and IRQ as resources ARM: shmobile: r8a73a4: Declare SCIF register base and IRQ as resources ARM: shmobile: r7s72100: Declare SCIF register base and IRQ as resources ARM: shmobile: sh73a0: Declare SCIF register base and IRQ as resources ARM: shmobile: sh7372: Declare SCIF register base and IRQ as resources ARM: shmobile: r8a7790: Don't define SCIF platform data in an array ... Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
* qcom/soc: ARM: msm: Simplify ARCH_MSM_DT config ARM: msm: Add support for MSM8974 SoC ARM: msm: trout: fix uninit var warning Signed-off-by: -
Stephen Boyd authored
This doesn't need to be a def_bool y. Instead we can have every DT supported platform select ARCH_MSM_DT and we achieve the same thing with less chance of conflicts. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
David Brown <davidb@codeaurora.org> Signed-off-by:
-
Rohit Vaswani authored
Add support for the Snapdragon 800 MSM8974 SoC, used on the Dragonboard and others. Board support added in separate patch. Signed-off-by:
Rohit Vaswani <rvaswani@codeaurora.org> Acked-by:
Kumar Gala <galak@codeaurora.org> Signed-off-by:
-
Josh Cartwright authored
Fix the following warning when !CONFIG_MMC: arch/arm/mach-msm/board-trout.c: In function 'trout_init': arch/arm/mach-msm/board-trout.c:67:6: warning: unused variable 'rc' [-Wunused-variable] int rc; ^ Also, while we're here, rework explicit printk(KERN_CRIT..) to use pr_crit. Signed-off-by:Josh Cartwright <joshc@codeaurora.org> Signed-off-by:
-
- 29 Dec, 2013 1 commit
-
-
Olof Johansson authored
Merge tag 'renesas-soc2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc From Simon Horman: Second Round of Renesas ARM Based SoC Updates for v3.14 * Global - Add select MIGHT_HAVE_PCI for PCI-AHB bridge code * r7s72100 SoC (RZ/A1H) - clks: remove duplicated clock from r7s72100 * R-Car Gen 2: r8a7791 (R-Car M2) and r8a7790 (R-Car H2) * Initialize CCF before clock sources * Do not setup timer in non-secure mode * r8a7791 (R-Car M2) - Conditionally select MICREL_PHY - Add clock index macros for DT sources - Add Ether clock * r8a7790 (R-Car H2) - Add clock index macros for DT sources - Add I2C support * r8a7778 (R-Car M1) - Add USB Func DMAEngine support - camera-rcar header cleanup - Add SSIx DMAEngine support * sh73a0 (SH-Mobile AG5) - Add FSI clock support for DT * tag 'renesas-soc2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm: shmobile: clks: remove duplicated clock from r7s72100 ARM: shmobile: koelsch: Conditionally select MICREL_PHY ARM: shmobile: rcar-gen2: Initialize CCF before clock sources ARM: shmobile: r8a7791: Add clock index macros for DT sources ARM: shmobile: r8a7790: Add clock index macros for DT sources ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code ARM: shmobile: r8a7778: add USB Func DMAEngine support ARM: rcar-gen2: Do not setup timer in non-secure mode ARM: shmobile: r8a7791: add Ether clock ARM: shmobile: r8a7778: camera-rcar header cleanup ARM: shmobile: sh73a0: add FSI clock support for DT ARM: shmobile: r8a7790: add I2C support ARM: shmobile: r8a7778: add SSIx DMAEngine support Signed-off-by:
-
- 26 Dec, 2013 3 commits
-
-
Olof Johansson authored
Merge tag 'tegra-for-3.14-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc From Stephen Warren: ARM: tegra: SoC-specific core code changes This branch contains various miscellaneous changes to code in the mach-tegra/ directory. It is baased on v3.13-rc1, and shouldn't conflict with anything else. * tag 'tegra-for-3.14-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: select PINCTRL_TEGRA124 for Tegra124 SoC ARM: tegra: use section-sized static mappings for LPAE too ARM: tegra: don't hard-code DEBUG_LL baud rate ARM: tegra: fix DEBUG_LL combined with LPAE ARM: tegra: switch FUSE clock on before usage Signed-off-by:
-
Olof Johansson authored
Merge tag 'tegra-for-3.14-powergate' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc From Stephen Warren: ARM: tegra: powergate driver changes This branch includes all the changes to Tegra's powergate driver for 3.14. These are separate out, since the Tegra DRM changes for 3.14 rely on the new APIs introduced here. A few cleanups and fixes are included, plus additions of Tegra124 SoC support, and a new API for manipulating Tegra's IO rail deep power down states. This branch is based on tag tegra-for-3.14-dmas-resets-rework, in order to avoid conflicts with the addition of common reset controller support to the powergate driver. * tag 'tegra-for-3.14-powergate' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Add IO rail support ARM: tegra: Special-case the 3D clamps on Tegra124 ARM: tegra: Add Tegra124 powergate support ARM: tegra: Export tegra_powergate_remove_clamping() ARM: tegra: Export tegra_powergate_power_off() ARM: tegra: Rename cpu0 powergate to crail ARM: tegra: Fix some whitespace oddities Signed-off-by:
-
Olof Johansson authored
Bringing in the tegra dma/reset rework as a base for new SoC branches. * tegra/dma-reset-rework: (81 commits) spi: tegra: checking for ERR_PTR instead of NULL ASoC: tegra: update module reset list for Tegra124 clk: tegra: remove bogus PCIE_XCLK clk: tegra: remove legacy reset APIs ARM: tegra: remove legacy DMA entries from DT ARM: tegra: remove legacy clock entries from DT USB: EHCI: tegra: use reset framework Input: tegra-kbc - use reset framework serial: tegra: convert to standard DMA DT bindings serial: tegra: use reset framework spi: tegra: convert to standard DMA DT bindings spi: tegra: use reset framework staging: nvec: use reset framework i2c: tegra: use reset framework ASoC: tegra: convert to standard DMA DT bindings ASoC: tegra: allocate AHUB FIFO during probe() not startup() ASoC: tegra: call pm_runtime APIs around register accesses ASoC: tegra: use reset framework dma: tegra: register as an OF DMA controller dma: tegra: use reset framework ... Signed-off-by:
-
- 24 Dec, 2013 31 commits
-
-
Wolfram Sang authored
Tested with RIIC2 on a genmai board. Others untested but hopefully trivial enough to be added. Signed-off-by:
Wolfram Sang <wsa@sang-engineering.com> Acked-by:
Magnus Damm <damm@opensource.se> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by:
-
Laurent Pinchart authored
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by:
-
Laurent Pinchart authored
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by:
-
Laurent Pinchart authored
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by:
-
Laurent Pinchart authored
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by:
-
Laurent Pinchart authored
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by:
-
Laurent Pinchart authored
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by:
-
Laurent Pinchart authored
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by:
-
Laurent Pinchart authored
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by:
-
Laurent Pinchart authored
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by:
-
Laurent Pinchart authored
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by:
-
Laurent Pinchart authored
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by:
-
Laurent Pinchart authored
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by:
-
Laurent Pinchart authored
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by:
-
Laurent Pinchart authored
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by:
-
Laurent Pinchart authored
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by:
-
Laurent Pinchart authored
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by:
-
Laurent Pinchart authored
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by:
-
Laurent Pinchart authored
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by:
-
Laurent Pinchart authored
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by:
-
Laurent Pinchart authored
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by:
-
Laurent Pinchart authored
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by:
-
Laurent Pinchart authored
Replace copy-n-paste SCIF platform data and device declaration with a macro. This reduces the amount of code and improves readability. Signed-off-by:
-
Laurent Pinchart authored
Replace copy-n-paste SCIF platform data and device declaration with a macro. This reduces the amount of code and improves readability. Signed-off-by:
-
Laurent Pinchart authored
Replace copy-n-paste SCIF platform data and device declaration with a macro. This reduces the amount of code and improves readability. Signed-off-by:
-
Laurent Pinchart authored
Replace copy-n-paste SCIF platform data and device declaration with a macro. This reduces the amount of code and improves readability. Signed-off-by:
-
Kuninori Morimoto authored
This is needed to use SRC (= Sampling Rate Converter) Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
Simon Horman authored
-
Laurent Pinchart authored
Computing the baud rate register value requires knowledge of the hardware sampling rate. This information is currently encoded in a baud rate calculation algorithm ID passed through platform data. However, it can be derived from the port type directly in most cases. Compute the sampling rate internally in the driver if the baud rate calculation algorithm ID isn't specified, and allow platforms to override the sampling rate through platform data in special cases (this is only required for SCIFA ports on sh7723 and sh7724, the reason needs to be investigated). Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
