- 03 Jul, 2024 1 commit
-
-
Richard Fitzgerald authored
The "Speaker Volume" control was being defined using four hardcoded magic numbers. There are #defines in the cs35l56.h header for these numbers, so change the code to use the defined constants. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20240703095517.208077-2-rf@opensource.cirrus.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 02 Jul, 2024 22 commits
-
-
Mark Brown authored
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>: Code used to create standalone and widget controls is mostly same, with with exception that in standalone case dynamic object needs to be registered and control created directly. Following patches clean up and unify kcontrol creation code in topology code.
-
Mark Brown authored
Merge series from Maxim Kochetkov <fido_max@inbox.ru>: nau8824 has external MCLK pin. So add enable/disable external clock management.
-
Animesh Agarwal authored
Convert the RT5650/RT5645 audio CODEC bindings to DT schema. Reviewed-by:
Rob Herring (Arm) <robh@kernel.org> Signed-off-by:
Animesh Agarwal <animeshagarwal28@gmail.com> Cc: Daniel Baluta <daniel.baluta@nxp.com> Link: https://patch.msgid.link/20240702120106.17100-1-animeshagarwal28@gmail.comSigned-off-by:
-
Amadeusz Sławiński authored
Code used to create standalone and widget enum control is same, with exception that in standalone case dynamic object needs to be registered and control created directly. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://patch.msgid.link/20240627101850.2191513-14-amadeuszx.slawinski@linux.intel.comSigned-off-by:
-
Amadeusz Sławiński authored
Code used to create standalone and widget mixer control is same, with exception that in standalone case dynamic object needs to be registered and control created directly. Signed-off-by:
-
Amadeusz Sławiński authored
Code used to create standalone and widget bytes control is same, with exception that in standalone case dynamic object needs to be registered and control created directly. Signed-off-by:
-
Amadeusz Sławiński authored
In preparation for following cleanups move functions around. Signed-off-by:
-
Amadeusz Sławiński authored
In following patches it will be reused to also create standalone kcontrol, so it makes sense to name it in more generic way. Signed-off-by:
-
Amadeusz Sławiński authored
soc_tplg_dbytes_create() missed se->dobj.index initialization, so add it there. Additionally separate dynamic object initialization into separate logical block code. Signed-off-by:
-
Amadeusz Sławiński authored
This aligns soc_tplg_denum_create() with soc_tplg_dapm_widget_denum_create(), as there is no reason for difference in behavior. Signed-off-by:
-
Amadeusz Sławiński authored
Minor cleanups to increase readability. Signed-off-by:
-
Amadeusz Sławiński authored
Minor cleanups to increase readability. Signed-off-by:
-
Amadeusz Sławiński authored
Minor cleanups to increase readability. Signed-off-by:
-
Amadeusz Sławiński authored
soc_tplg_denum_create_values() should properly set its values field. Signed-off-by:
-
Amadeusz Sławiński authored
Widget kcontrols do not need to be managed as topology dynamic objects with an index and a linked list. As they are always associated with a widget which is already a topology dynamic object, thus all addition/removals of a widget will by design manage the kcontrol. Signed-off-by:
-
Amadeusz Sławiński authored
Instead of using goto, when there is no controls, just do a loop when there are. Overall the check seems to be a bit redundant as num_kcontrols will only be above 0 if kcontrols are set anyway, but let's keep it, while simplifying code. Signed-off-by:
-
Richard Fitzgerald authored
Add a check to cs_dsp_coeff_write_ctrl() to abort if the control is not writeable. The cs_dsp code originated as an ASoC driver (wm_adsp) where all controls were exported as ALSA controls. It relied on ALSA to enforce the read-only permission. Now that the code has been separated from ALSA/ASoC it must perform its own permission check. This isn't currently causing any problems so there shouldn't be any need to backport this. If the client of cs_dsp exposes the control as an ALSA control, it should set permissions on that ALSA control to protect it. The few uses of cs_dsp_coeff_write_ctrl() inside drivers are for writable controls. Signed-off-by:
-
Maxim Kochetkov authored
Use master clock "mclk" if provided through device tree. Signed-off-by:
Maxim Kochetkov <fido_max@inbox.ru> Link: https://patch.msgid.link/20240701211631.92384-3-fido_max@inbox.ruSigned-off-by:
-
Maxim Kochetkov authored
Use master clock "mclk" if provided through device tree. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240701211631.92384-2-fido_max@inbox.ruSigned-off-by:
-
Mark Brown authored
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: simple-audio-mux is designed to be used generally, thus "Input 1" or "Input 2" are used to selecting MUX input. This numbered inputs would work, but might be not user friendly in some case, for example in case of system hardware design has some clear labels. Adds new "state-labels" property and enable to select MUX by own state names. Original > amixer set "MUX" "Input 1" > amixer set "MUX" "Input 2" Use mux-names sound_mux: mux { compatible = "simple-audio-mux"; mux-gpios = <...>; => state-labels = "Label_A", "Label_B"; }; > amixer set "MUX" "Label_A" > amixer set "MUX" "Label_B" -
Mark Brown authored
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: These commits remove various code that is either no longer needed, or is redundant.
-
Mark Brown authored
Merge series from srinivas.kandagatla@linaro.org: Existing way of allocating soundwire master ports on Qualcommm platforms is dynamic, and in linear order starting from 1 to MAX_PORTS. This will work as long as soundwire device ports are 1:1 mapped linearly. However on most Qcom SoCs like SM8550, SM8650, x1e80100, these are NOT mapped in that order. The result of this is that only one speaker among the pair of speakers is always silent, With recent changes for WSA codec to support codec versions and along with these patches we are able to get all speakers working on these SoCs.
-
- 01 Jul, 2024 17 commits
-
-
Krzysztof Kozlowski authored
The 'wsa->dev' is assigned closer to the end of the probe() function, so the dev_err() must not use it - it is still NULL at this point. Instead there is already a local 'dev' variable. Fixes: 727de4fb ("ASoC: codecs: lpass-wsa-macro: Correct support for newer v2.5 version") Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patch.msgid.link/20240628095831.207942-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The 'rx->dev' is assigned closer to the end of the probe() function, so the dev_err() must not use it - it is still NULL at this point. Instead there is already a local 'dev' variable. Fixes: dbacef05 ("ASoC: codec: lpass-rx-macro: prepare driver to accomdate new codec versions") Signed-off-by:
-
Nathan Chancellor authored
bitfield.h is not explicitly included but it is required for FIELD_PREP to be expanded by the preprocessor. If it is not implicitly included, there will be a compiler error (as seen with ARCH=hexagon allmodconfig): sound/soc/fsl/lpc3xxx-i2s.c:169:10: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] 169 | tmp |= LPC3XXX_I2S_WW8 | LPC3XXX_I2S_WS_HP(LPC3XXX_I2S_WW8_HP); | ^ sound/soc/fsl/lpc3xxx-i2s.h:42:30: note: expanded from macro 'LPC3XXX_I2S_WW8' 42 | #define LPC3XXX_I2S_WW8 FIELD_PREP(0x3, 0) /* Word width is 8bit */ | ^ sound/soc/fsl/lpc3xxx-i2s.c:205:34: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] 205 | LPC3XXX_I2S_DMA1_TX_EN | LPC3XXX_I2S_DMA0_TX_DEPTH(4)); | ^ sound/soc/fsl/lpc3xxx-i2s.h:65:38: note: expanded from macro 'LPC3XXX_I2S_DMA0_TX_DEPTH' 65 | #define LPC3XXX_I2S_DMA0_TX_DEPTH(s) FIELD_PREP(0xF0000, s) /* Set the DMA1 TX Request level */ | ^ sound/soc/fsl/lpc3xxx-i2s.c:210:34: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] 210 | LPC3XXX_I2S_DMA0_RX_EN | LPC3XXX_I2S_DMA1_RX_DEPTH(4)); | ^ sound/soc/fsl/lpc3xxx-i2s.h:70:38: note: expanded from macro 'LPC3XXX_I2S_DMA1_RX_DEPTH' 70 | #define LPC3XXX_I2S_DMA1_RX_DEPTH(s) FIELD_PREP(0x700, s) /* Set the DMA1 RX Request level */ | ^ Include bitfield.h explicitly, so that FIELD_PREP is always expanded, clearing up the compiler error. Fixes: 0959de65 ("ASoC: fsl: Add i2s and pcm drivers for LPC32xx CPUs") Signed-off-by:Nathan Chancellor <nathan@kernel.org> Link: https://patch.msgid.link/20240701-lpc32xx-asoc-fix-include-for-field_prep-v1-1-0c5d7f71921b@kernel.orgSigned-off-by:
-
Nathan Chancellor authored
clang points out that ret may be used uninitialized in lpc32xx_i2s_probe() in an error pointer path (which becomes fatal with CONFIG_WERROR): sound/soc/fsl/lpc3xxx-i2s.c:326:47: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized] 326 | "failed to init register map: %d\n", ret); | ^~~ sound/soc/fsl/lpc3xxx-i2s.c:310:9: note: initialize the variable 'ret' to silence this warning 310 | int ret; | ^ | = 0 1 error generated. One solution would be a small refactoring of the second parameter in dev_err_probe(), PTR_ERR(i2s_info_p->regs), to be the value of ret in the if statement. However, a nicer solution for debugging purposes, which is the point of this statement, would be to use the '%pe' specifier to symbolically print the error pointer value. Do so, which eliminates the uninitialized use of ret, clearing up the warning. Fixes: 0959de65 ("ASoC: fsl: Add i2s and pcm drivers for LPC32xx CPUs") Signed-off-by: -
Animesh Agarwal authored
Convert the RT5677 audio CODEC bindings to DT schema. Signed-off-by:
-
Shenghao Ding authored
Add name_prefix as the prefix name of DSP firmwares and calibrated data files which stored speaker calibrated impedance. Signed-off-by:
Shenghao Ding <shenghao-ding@ti.com> Link: https://patch.msgid.link/20240629101112.628-1-shenghao-ding@ti.comSigned-off-by:
-
Srinivas Kandagatla authored
Add support to parse static master port map information from device tree. This is required for correct port mapping between soundwire device and master ports. Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by:
-
Srinivas Kandagatla authored
Document port mapping property for wsa884x. Port mapping is required to be able map correct master ports. All the device ports are not mapped in same order as master ports, so there is a need for having static port mapping for WSA codecs. Reviewed-by:
-
Srinivas Kandagatla authored
Add support to parse static master port map information from device tree. Reviewed-by:
-
Manikantan R authored
Document port mapping property for wsa883x. Port mapping is required to be able map correct master ports for VI feedback. All the device ports are not mapped in same order as master ports, so there is a need for having static port mapping for WSA codecs. Signed-off-by:
Manikantan R <quic_manrav@quicinc.com> Reviewed-by:
-
Kuninori Morimoto authored
simple-audio-mux is designed to be used generally, thus "Input 1" or "Input 2" are used to selecting MUX input. This numbered inputs would work, but might be not user friendly in some case, for example in case of system hardware design has some clear labels. Adds new "state-labels" property and enable to select MUX by own state names. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
-
Kuninori Morimoto authored
simple-audio-mux is designed to be used generally, thus "Input 1" or "Input 2" are used to selecting MUX input. This numbered inputs would work, but might be not user friendly in some case, for example in case of system hardware design has some clear labels. Adds new "state-labels" property and enable to select MUX by own state names. Original > amixer set "MUX" "Input 1" Use mux-names sound_mux: mux { compatible = "simple-audio-mux"; mux-gpios = <...>; state-labels = "Label_A", "Label_B"; }; > amixer set "MUX" "Label_A" Signed-off-by: -
Animesh Agarwal authored
Convert the RT5659/RT5658 audio CODEC bindings to DT schema. Signed-off-by:
-
Chancel Liu authored
Add compatible string and specific soc data to support rpmsg sound card on i.MX95 platform. Signed-off-by:
Chancel Liu <chancel.liu@nxp.com> Acked-by:
Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://patch.msgid.link/20240626071202.7149-2-chancel.liu@nxp.comSigned-off-by:
-
Chancel Liu authored
Add compatible string for i.MX95 platform which supports audio function through rpmsg channel between Cortex-A and Cortex-M core. Signed-off-by:
-
Richard Fitzgerald authored
struct sdw_slave_prop is zero-initialized by the SoundWire core so there is no need to clear clk_stop_mode1 to false. Removing this also avoids having an unnecessary build dependency on a struct member. Signed-off-by:
-
Richard Fitzgerald authored
No product was ever released with A1 silicon so there is no need for the driver to include support for it. Signed-off-by:
-
