- 20 Apr, 2022 1 commit
-
-
Nicolas Dichtel authored
Let's describe this sysctl. Fixes: 5cbf777c ("route: add support for directed broadcast forwarding") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 19 Apr, 2022 3 commits
-
-
Eric Dumazet authored
netlink_dump() is allocating an skb, reserves space in it but forgets to reset network header. This allows a BPF program, invoked later from sk_filter() to access uninitialized kernel memory from the reserved space. Theorically mac header reset could be omitted, because it is set to a special initial value. bpf_internal_load_pointer_neg_helper calls skb_mac_header() without checking skb_mac_header_was_set(). Relying on skb->len not being too big seems fragile. We also could add a sanity check in bpf_internal_load_pointer_neg_helper() to avoid surprises in the future. syzbot report was: BUG: KMSAN: uninit-value in ___bpf_prog_run+0xa22b/0xb420 kernel/bpf/core.c:1637 ___bpf_prog_run+0xa22b/0xb420 kernel/bpf/core.c:1637 __bpf_prog_run32+0x121/0x180 kernel/bpf/core.c:1796 bpf_dispatcher_nop_func include/linux/bpf.h:784 [inline] __bpf_prog_run include/linux/filter.h:626 [inline] bpf_prog_run include/linux/filter.h:633 [inline] __bpf_prog_run_save_cb+0x168/0x580 include/linux/filter.h:756 bpf_prog_run_save_cb include/linux/filter.h:770 [inline] sk_filter_trim_cap+0x3bc/0x8c0 net/core/filter.c:150 sk_filter include/linux/filter.h:905 [inline] netlink_dump+0xe0c/0x16c0 net/netlink/af_netlink.c:2276 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_read_iter+0x5a9/0x630 net/socket.c:1039 do_iter_readv_writev+0xa7f/0xc70 do_iter_read+0x52c/0x14c0 fs/read_write.c:786 vfs_readv fs/read_write.c:906 [inline] do_readv+0x432/0x800 fs/read_write.c:943 __do_sys_readv fs/read_write.c:1034 [inline] __se_sys_readv fs/read_write.c:1031 [inline] __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was stored to memory at: ___bpf_prog_run+0x96c/0xb420 kernel/bpf/core.c:1558 __bpf_prog_run32+0x121/0x180 kernel/bpf/core.c:1796 bpf_dispatcher_nop_func include/linux/bpf.h:784 [inline] __bpf_prog_run include/linux/filter.h:626 [inline] bpf_prog_run include/linux/filter.h:633 [inline] __bpf_prog_run_save_cb+0x168/0x580 include/linux/filter.h:756 bpf_prog_run_save_cb include/linux/filter.h:770 [inline] sk_filter_trim_cap+0x3bc/0x8c0 net/core/filter.c:150 sk_filter include/linux/filter.h:905 [inline] netlink_dump+0xe0c/0x16c0 net/netlink/af_netlink.c:2276 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_read_iter+0x5a9/0x630 net/socket.c:1039 do_iter_readv_writev+0xa7f/0xc70 do_iter_read+0x52c/0x14c0 fs/read_write.c:786 vfs_readv fs/read_write.c:906 [inline] do_readv+0x432/0x800 fs/read_write.c:943 __do_sys_readv fs/read_write.c:1034 [inline] __se_sys_readv fs/read_write.c:1031 [inline] __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3244 [inline] __kmalloc_node_track_caller+0xde3/0x14f0 mm/slub.c:4972 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1158 [inline] netlink_dump+0x30f/0x16c0 net/netlink/af_netlink.c:2242 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_read_iter+0x5a9/0x630 net/socket.c:1039 do_iter_readv_writev+0xa7f/0xc70 do_iter_read+0x52c/0x14c0 fs/read_write.c:786 vfs_readv fs/read_write.c:906 [inline] do_readv+0x432/0x800 fs/read_write.c:943 __do_sys_readv fs/read_write.c:1034 [inline] __se_sys_readv fs/read_write.c:1031 [inline] __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x44/0xae CPU: 0 PID: 3470 Comm: syz-executor751 Not tainted 5.17.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: db65a3aa ("netlink: Trim skb to alloc size to avoid MSG_TRUNC") Fixes: 9063e21f ("netlink: autosize skb lengthes") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220415181442.551228-1-eric.dumazet@gmail.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Vladimir Oltean authored
When the user runs: bridge link set dev $br_port mcast_flood on this command should affect not only L2 multicast, but also IPv4 and IPv6 multicast. In the Ocelot switch, unknown multicast gets flooded according to different PGIDs according to its type, and PGID_MC only handles L2 multicast. Therefore, by leaving PGID_MCIPV4 and PGID_MCIPV6 at their default value of 0, unknown IP multicast traffic is never flooded. Fixes: 421741ea ("net: mscc: ocelot: offload bridge port flags to device") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220415151950.219660-1-vladimir.oltean@nxp.comSigned-off-by:
-
Kurt Kanzenbach authored
In case the checksum calculation is offloaded to the DSA master network interface, it will include the switch trailing tag. As soon as the switch strips that tag on egress, the calculated checksum is wrong. Therefore, add the checksum calculation to the tagger (if required) before adding the switch tag. This way, the hellcreek code works with all DSA master interfaces regardless of their declared feature set. Fixes: 01ef09ca ("net: dsa: Add tag handling for Hirschmann Hellcreek switches") Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220415103320.90657-1-kurt@linutronix.deSigned-off-by:
-
- 18 Apr, 2022 2 commits
-
-
Manuel Ullmann authored
This will reset deeply on freeze and thaw instead of suspend and resume and prevent null pointer dereferences of the uninitialized ring 0 buffer while thawing. The impact is an indefinitely hanging kernel. You can't switch consoles after this and the only possible user interaction is SysRq. BUG: kernel NULL pointer dereference RIP: 0010:aq_ring_rx_fill+0xcf/0x210 [atlantic] aq_vec_init+0x85/0xe0 [atlantic] aq_nic_init+0xf7/0x1d0 [atlantic] atl_resume_common+0x4f/0x100 [atlantic] pci_pm_thaw+0x42/0xa0 resolves in aq_ring.o to ``` 0000000000000ae0 <aq_ring_rx_fill>: { /* ... */ baf: 48 8b 43 08 mov 0x8(%rbx),%rax buff->flags = 0U; /* buff is NULL */ ``` The bug has been present since the introduction of the new pm code in 8aaa112a ("net: atlantic: refactoring pm logic") and was hidden until 8ce84271 ("net: atlantic: changes for multi-TC support"), which refactored the aq_vec_{free,alloc} functions into aq_vec_{,ring}_{free,alloc}, but is technically not wrong. The original functions just always reinitialized the buffers on S3/S4. If the interface is down before freezing, the bug does not occur. It does not matter, whether the initrd contains and loads the module before thawing. So the fix is to invert the boolean parameter deep in all pm function calls, which was clearly intended to be set like that. First report was on Github [1], which you have to guess from the resume logs in the posted dmesg snippet. Recently I posted one on Bugzilla [2], since I did not have an AQC device so far. #regzbot introduced: 8ce84271 #regzbot from: koo5 <kolman.jindrich@gmail.com> #regzbot monitor: https://github.com/Aquantia/AQtion/issues/32 Fixes: 8aaa112a ("net: atlantic: refactoring pm logic") Link: https://github.com/Aquantia/AQtion/issues/32 [1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=215798 [2] Cc: stable@vger.kernel.org Reported-by:koo5 <kolman.jindrich@gmail.com> Signed-off-by:
Manuel Ullmann <labre@posteo.de> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.18-20220417' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-04-17 this is a pull request of 1 patch for net/master. The patch is by Oliver Hartkopp and fixes a timeout monitoring problem in the ISO TP protocol found by the syzbot. ==================== Signed-off-by:
-
- 17 Apr, 2022 2 commits
-
-
Oliver Hartkopp authored
The first attempt to fix a the 'impossible' WARN_ON_ONCE(1) in isotp_tx_timer_handler() focussed on the identical CAN IDs created by the syzbot reproducer and lead to upstream fix/commit 3ea56642 ("can: isotp: sanitize CAN ID checks in isotp_bind()"). But this did not catch the root cause of the wrong tx.state in the tx_timer handler. In the isotp 'first frame' case a timeout monitoring needs to be started before the 'first frame' is send. But when this sending failed the timeout monitoring for this specific frame has to be disabled too. Otherwise the tx_timer is fired with the 'warn me' tx.state of ISOTP_IDLE. Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/20220405175112.2682-1-socketcan@hartkopp.net Reported-by: syzbot+2339c27f5c66c652843e@syzkaller.appspotmail.com Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
suresh kumar authored
Commit b5f86218 was introduced to discard lowest hash bit for layer3+4 hashing but it also removes last bit from non layer3+4 hashing Below script shows layer2+3 hashing will result in same slave to be used with above commit. $ cat hash.py #/usr/bin/python3.6 h_dests=[0xa0, 0xa1] h_source=0xe3 hproto=0x8 saddr=0x1e7aa8c0 daddr=0x17aa8c0 for h_dest in h_dests: hash = (h_dest ^ h_source ^ hproto ^ saddr ^ daddr) hash ^= hash >> 16 hash ^= hash >> 8 print(hash) print("with last bit removed") for h_dest in h_dests: hash = (h_dest ^ h_source ^ hproto ^ saddr ^ daddr) hash ^= hash >> 16 hash ^= hash >> 8 hash = hash >> 1 print(hash) Output: $ python3.6 hash.py 522133332 522133333 <-------------- will result in both slaves being used with last bit removed 261066666 261066666 <-------------- only single slave used Signed-off-by:
suresh kumar <suresh2514@gmail.com> Signed-off-by:
-
- 15 Apr, 2022 20 commits
-
-
Horatiu Vultur authored
When the lan966x driver is removed make sure to remove also the ptp_irq IRQ. Fixes: e85a96e4 ("net: lan966x: Add support for ptp interrupts") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220413195716.3796467-1-horatiu.vultur@microchip.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
Reads and Writes to ip6_rt_gc_expire always have been racy, as syzbot reported lately [1] There is a possible risk of under-flow, leading to unexpected high value passed to fib6_run_gc(), although I have not observed this in the field. Hosts hitting ip6_dst_gc() very hard are under pretty bad state anyway. [1] BUG: KCSAN: data-race in ip6_dst_gc / ip6_dst_gc read-write to 0xffff888102110744 of 4 bytes by task 13165 on cpu 1: ip6_dst_gc+0x1f3/0x220 net/ipv6/route.c:3311 dst_alloc+0x9b/0x160 net/core/dst.c:86 ip6_dst_alloc net/ipv6/route.c:344 [inline] icmp6_dst_alloc+0xb2/0x360 net/ipv6/route.c:3261 mld_sendpack+0x2b9/0x580 net/ipv6/mcast.c:1807 mld_send_cr net/ipv6/mcast.c:2119 [inline] mld_ifc_work+0x576/0x800 net/ipv6/mcast.c:2651 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289 worker_thread+0x618/0xa70 kernel/workqueue.c:2436 kthread+0x1a9/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 read-write to 0xffff888102110744 of 4 bytes by task 11607 on cpu 0: ip6_dst_gc+0x1f3/0x220 net/ipv6/route.c:3311 dst_alloc+0x9b/0x160 net/core/dst.c:86 ip6_dst_alloc net/ipv6/route.c:344 [inline] icmp6_dst_alloc+0xb2/0x360 net/ipv6/route.c:3261 mld_sendpack+0x2b9/0x580 net/ipv6/mcast.c:1807 mld_send_cr net/ipv6/mcast.c:2119 [inline] mld_ifc_work+0x576/0x800 net/ipv6/mcast.c:2651 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289 worker_thread+0x618/0xa70 kernel/workqueue.c:2436 kthread+0x1a9/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 value changed: 0x00000bb3 -> 0x00000ba9 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 11607 Comm: kworker/0:21 Not tainted 5.18.0-rc1-syzkaller-00037-g42e7a03d-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: mld mld_ifc_work Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220413181333.649424-1-eric.dumazet@gmail.comSigned-off-by:
-
Jakub Kicinski authored
David Ahern says: ==================== l3mdev: Fix ip tunnel case after recent l3mdev change Second patch provides a fix for ip tunnels after the recent l3mdev change that avoids touching the oif in the flow struct. First patch preemptively provides a fix to an existing function that the second patch uses. ==================== Link: https://lore.kernel.org/r/20220413174320.28989-1-dsahern@kernel.orgSigned-off-by:
-
David Ahern authored
Ido reported that the commit referenced in the Fixes tag broke a gre use case with dummy devices. Add a check to ip_tunnel_init_flow to see if the oif is an l3mdev port and if so set the oif to 0 to avoid the oif comparison in fib_lookup_good_nhc. Fixes: 40867d74 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") Reported-by:
Ido Schimmel <idosch@idosch.org> Signed-off-by:
-
David Ahern authored
Next patch uses l3mdev_master_upper_ifindex_by_index_rcu which throws a splat with debug kernels: [13783.087570] ------------[ cut here ]------------ [13783.093974] RTNL: assertion failed at net/core/dev.c (6702) [13783.100761] WARNING: CPU: 3 PID: 51132 at net/core/dev.c:6702 netdev_master_upper_dev_get+0x16a/0x1a0 [13783.184226] CPU: 3 PID: 51132 Comm: kworker/3:3 Not tainted 5.17.0-custom-100090-g6f963aafb1cc #682 [13783.194788] Hardware name: Mellanox Technologies Ltd. MSN2010/SA002610, BIOS 5.6.5 08/24/2017 [13783.204755] Workqueue: mld mld_ifc_work [ipv6] [13783.210338] RIP: 0010:netdev_master_upper_dev_get+0x16a/0x1a0 [13783.217209] Code: 0f 85 e3 fe ff ff e8 65 ac ec fe ba 2e 1a 00 00 48 c7 c6 60 6f 38 83 48 c7 c7 c0 70 38 83 c6 05 5e b5 d7 01 01 e8 c6 29 52 00 <0f> 0b e9 b8 fe ff ff e8 5a 6c 35 ff e9 1c ff ff ff 48 89 ef e8 7d [13783.238659] RSP: 0018:ffffc9000b37f5a8 EFLAGS: 00010286 [13783.244995] RAX: 0000000000000000 RBX: ffff88812ee5c000 RCX: 0000000000000000 [13783.253379] RDX: ffff88811ce09d40 RSI: ffffffff812d0fcd RDI: fffff5200166fea7 [13783.261769] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff8882375f4287 [13783.270138] R10: ffffed1046ebe850 R11: 0000000000000001 R12: dffffc0000000000 [13783.278510] R13: 0000000000000275 R14: ffffc9000b37f688 R15: ffff8881273b4af8 [13783.286870] FS: 0000000000000000(0000) GS:ffff888237400000(0000) knlGS:0000000000000000 [13783.296352] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [13783.303177] CR2: 00007ff25fc9b2e8 CR3: 0000000174d23000 CR4: 00000000001006e0 [13783.311546] Call Trace: [13783.314660] <TASK> [13783.317553] l3mdev_master_upper_ifindex_by_index_rcu+0x43/0xe0 ... Change l3mdev_master_upper_ifindex_by_index_rcu to use netdev_master_upper_dev_get_rcu. Fixes: 6a6d6681 ("l3mdev: add function to retreive upper master") Signed-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== net/sched: two fixes for cls_u32 One syzbot report brought my attention to cls_u32. This series addresses the syzbot report, and an additional issue discovered in code review. ==================== Link: https://lore.kernel.org/r/20220413173542.533060-1-eric.dumazet@gmail.comSigned-off-by:
-
Eric Dumazet authored
While investigating a related syzbot report, I found that whenever call to tcf_exts_init() from u32_init_knode() is failing, we end up with an elevated refcount on ht->refcnt To avoid that, only increase the refcount after all possible errors have been evaluated. Fixes: b9a24bb7 ("net_sched: properly handle failure case of tcf_exts_init()") Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Eric Dumazet authored
We are now able to detect extra put_net() at the moment they happen, instead of much later in correct code paths. u32_init_knode() / tcf_exts_init() populates the ->exts.net pointer, but as mentioned in tcf_exts_init(), the refcount on netns has not been elevated yet. The refcount is taken only once tcf_exts_get_net() is called. So the two u32_destroy_key() calls from u32_change() are attempting to release an invalid reference on the netns. syzbot report: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 0 PID: 21708 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31 Modules linked in: CPU: 0 PID: 21708 Comm: syz-executor.5 Not tainted 5.18.0-rc2-next-20220412-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31 Code: 1d 14 b6 b2 09 31 ff 89 de e8 6d e9 89 fd 84 db 75 e0 e8 84 e5 89 fd 48 c7 c7 40 aa 26 8a c6 05 f4 b5 b2 09 01 e8 e5 81 2e 05 <0f> 0b eb c4 e8 68 e5 89 fd 0f b6 1d e3 b5 b2 09 31 ff 89 de e8 38 RSP: 0018:ffffc900051af1b0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000040000 RSI: ffffffff8160a0c8 RDI: fffff52000a35e28 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff81604a9e R11: 0000000000000000 R12: 1ffff92000a35e3b R13: 00000000ffffffef R14: ffff8880211a0194 R15: ffff8880577d0a00 FS: 00007f25d183e700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f19c859c028 CR3: 0000000051009000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __refcount_dec include/linux/refcount.h:344 [inline] refcount_dec include/linux/refcount.h:359 [inline] ref_tracker_free+0x535/0x6b0 lib/ref_tracker.c:118 netns_tracker_free include/net/net_namespace.h:327 [inline] put_net_track include/net/net_namespace.h:341 [inline] tcf_exts_put_net include/net/pkt_cls.h:255 [inline] u32_destroy_key.isra.0+0xa7/0x2b0 net/sched/cls_u32.c:394 u32_change+0xe01/0x3140 net/sched/cls_u32.c:909 tc_new_tfilter+0x98d/0x2200 net/sched/cls_api.c:2148 rtnetlink_rcv_msg+0x80d/0xb80 net/core/rtnetlink.c:6016 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2495 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x6e2/0x800 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f25d0689049 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f25d183e168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f25d079c030 RCX: 00007f25d0689049 RDX: 0000000000000000 RSI: 0000000020000340 RDI: 0000000000000005 RBP: 00007f25d06e308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffd0b752e3f R14: 00007f25d183e300 R15: 0000000000022000 </TASK> Fixes: 35c55fc1 ("cls_u32: use tcf_exts_get_net() before call_rcu()") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-04-13 This series contains updates to igc and e1000e drivers. Sasha removes waiting for hardware semaphore as it could cause an infinite loop and changes usleep_range() calls done under atomic context to udelay() for igc. For e1000e, he changes some variables from u16 to u32 to prevent possible overflow of values. Vinicius disables PTM when going to suspend as it is causing hang issues on some platforms for igc. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: Fix possible overflow in LTR decoding igc: Fix suspending when PTM is active igc: Fix BUG: scheduling while atomic igc: Fix infinite loop in release_swfw_sync ==================== Link: https://lore.kernel.org/r/20220413170814.2066855-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Sukadev Bhattiprolu authored
Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by:
-
Stephen Hemminger authored
The displayed list of Ethernet devices in make menuconfig has gotten out of order. This is mostly due to changes in vendor names etc, but also because of new Microsoft entry in wrong place. This restores so that the display is in order even if the names of the sub directories are not. Fixes: ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Paolo Valerio authored
Given a sufficiently large number of actions, while copying and reserving memory for a new action of a new flow, if next_offset is greater than MAX_ACTIONS_BUFSIZE, the function reserve_sfa_size() does not return -EMSGSIZE as expected, but it allocates MAX_ACTIONS_BUFSIZE bytes increasing actions_len by req_size. This can then lead to an OOB write access, especially when further actions need to be copied. Fix it by rearranging the flow action size check. KASAN splat below: ================================================================== BUG: KASAN: slab-out-of-bounds in reserve_sfa_size+0x1ba/0x380 [openvswitch] Write of size 65360 at addr ffff888147e4001c by task handler15/836 CPU: 1 PID: 836 Comm: handler15 Not tainted 5.18.0-rc1+ #27 ... Call Trace: <TASK> dump_stack_lvl+0x45/0x5a print_report.cold+0x5e/0x5db ? __lock_text_start+0x8/0x8 ? reserve_sfa_size+0x1ba/0x380 [openvswitch] kasan_report+0xb5/0x130 ? reserve_sfa_size+0x1ba/0x380 [openvswitch] kasan_check_range+0xf5/0x1d0 memcpy+0x39/0x60 reserve_sfa_size+0x1ba/0x380 [openvswitch] __add_action+0x24/0x120 [openvswitch] ovs_nla_add_action+0xe/0x20 [openvswitch] ovs_ct_copy_action+0x29d/0x1130 [openvswitch] ? __kernel_text_address+0xe/0x30 ? unwind_get_return_address+0x56/0xa0 ? create_prof_cpu_mask+0x20/0x20 ? ovs_ct_verify+0xf0/0xf0 [openvswitch] ? prep_compound_page+0x198/0x2a0 ? __kasan_check_byte+0x10/0x40 ? kasan_unpoison+0x40/0x70 ? ksize+0x44/0x60 ? reserve_sfa_size+0x75/0x380 [openvswitch] __ovs_nla_copy_actions+0xc26/0x2070 [openvswitch] ? __zone_watermark_ok+0x420/0x420 ? validate_set.constprop.0+0xc90/0xc90 [openvswitch] ? __alloc_pages+0x1a9/0x3e0 ? __alloc_pages_slowpath.constprop.0+0x1da0/0x1da0 ? unwind_next_frame+0x991/0x1e40 ? __mod_node_page_state+0x99/0x120 ? __mod_lruvec_page_state+0x2e3/0x470 ? __kasan_kmalloc_large+0x90/0xe0 ovs_nla_copy_actions+0x1b4/0x2c0 [openvswitch] ovs_flow_cmd_new+0x3cd/0xb10 [openvswitch] ... Cc: stable@vger.kernel.org Fixes: f28cd2af ("openvswitch: fix flow actions reallocation") Signed-off-by:
Paolo Valerio <pvalerio@redhat.com> Acked-by:
Eelco Chaudron <echaudro@redhat.com> Signed-off-by:
-
Peilin Ye authored
Feng reported an skb_under_panic BUG triggered by running test_ip6gretap() in tools/testing/selftests/bpf/test_tunnel.sh: [ 82.492551] skbuff: skb_under_panic: text:ffffffffb268bb8e len:403 put:12 head:ffff9997c5480000 data:ffff9997c547fff8 tail:0x18b end:0x2c0 dev:ip6gretap11 <...> [ 82.607380] Call Trace: [ 82.609389] <TASK> [ 82.611136] skb_push.cold.109+0x10/0x10 [ 82.614289] __gre6_xmit+0x41e/0x590 [ 82.617169] ip6gre_tunnel_xmit+0x344/0x3f0 [ 82.620526] dev_hard_start_xmit+0xf1/0x330 [ 82.623882] sch_direct_xmit+0xe4/0x250 [ 82.626961] __dev_queue_xmit+0x720/0xfe0 <...> [ 82.633431] packet_sendmsg+0x96a/0x1cb0 [ 82.636568] sock_sendmsg+0x30/0x40 <...> The following sequence of events caused the BUG: 1. During ip6gretap device initialization, tunnel->tun_hlen (e.g. 4) is calculated based on old flags (see ip6gre_calc_hlen()); 2. packet_snd() reserves header room for skb A, assuming tunnel->tun_hlen is 4; 3. Later (in clsact Qdisc), the eBPF program sets a new tunnel key for skb A using bpf_skb_set_tunnel_key() (see _ip6gretap_set_tunnel()); 4. __gre6_xmit() detects the new tunnel key, and recalculates "tun_hlen" (e.g. 12) based on new flags (e.g. TUNNEL_KEY and TUNNEL_SEQ); 5. gre_build_header() calls skb_push() with insufficient reserved header room, triggering the BUG. As sugguested by Cong, fix it by moving the call to skb_cow_head() after the recalculation of tun_hlen. Reproducer: OBJ=$LINUX/tools/testing/selftests/bpf/test_tunnel_kern.o ip netns add at_ns0 ip link add veth0 type veth peer name veth1 ip link set veth0 netns at_ns0 ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0 ip netns exec at_ns0 ip link set dev veth0 up ip link set dev veth1 up mtu 1500 ip addr add dev veth1 172.16.1.200/24 ip netns exec at_ns0 ip addr add ::11/96 dev veth0 ip netns exec at_ns0 ip link set dev veth0 up ip addr add dev veth1 ::22/96 ip link set dev veth1 up ip netns exec at_ns0 \ ip link add dev ip6gretap00 type ip6gretap seq flowlabel 0xbcdef key 2 \ local ::11 remote ::22 ip netns exec at_ns0 ip addr add dev ip6gretap00 10.1.1.100/24 ip netns exec at_ns0 ip addr add dev ip6gretap00 fc80::100/96 ip netns exec at_ns0 ip link set dev ip6gretap00 up ip link add dev ip6gretap11 type ip6gretap external ip addr add dev ip6gretap11 10.1.1.200/24 ip addr add dev ip6gretap11 fc80::200/24 ip link set dev ip6gretap11 up tc qdisc add dev ip6gretap11 clsact tc filter add dev ip6gretap11 egress bpf da obj $OBJ sec ip6gretap_set_tunnel tc filter add dev ip6gretap11 ingress bpf da obj $OBJ sec ip6gretap_get_tunnel ping6 -c 3 -w 10 -q ::11 Fixes: 6712abc1 ("ip6_gre: add ip6 gre and gretap collect_md mode") Reported-by:
Feng Zhou <zhoufeng.zf@bytedance.com> Co-developed-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
Peilin Ye <peilin.ye@bytedance.com> Signed-off-by:
-
Peilin Ye authored
Do not update tunnel->tun_hlen in data plane code. Use a local variable instead, just like "tunnel_hlen" in net/ipv4/ip_gre.c:gre_fb_xmit(). Co-developed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-04-14 This series contains updates to ice driver only. Maciej adjusts implementation in __ice_alloc_rx_bufs_zc() for when ice_fill_rx_descs() does not return the entire buffer request and fixes a return value for !CONFIG_NET_SWITCHDEV configuration which was preventing VF creation. Wojciech prevents eswitch transmit when VFs are being removed which was causing NULL pointer dereference. Jianglei Nie fixes a memory leak on error path of getting OROM data. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2022-04-14 1) Fix the output interface for VRF cases in xfrm_dst_lookup. From David Ahern. 2) Fix write out of bounds by doing COW on esp output when the packet size is larger than a page. From Sabrina Dubroca. ==================== Signed-off-by: -
Hangbin Liu authored
packet_sock xmit could be dev_queue_xmit, which also returns negative errors. So only checking positive errors is not enough, or userspace sendmsg may return success while packet is not send out. Move the net_xmit_errno() assignment in the braces as checkpatch.pl said do not use assignment in if condition. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Flavio Leitner <fbl@redhat.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Tony Lu authored
Since commit e5d5aadc ("net/smc: fix sk_refcnt underflow on linkdown and fallback"), for a fallback connection, __smc_release() does not call sock_put() if its state is already SMC_CLOSED. When calling smc_shutdown() after falling back, its state is set to SMC_CLOSED but does not call sock_put(), so this patch calls it. Reported-and-tested-by: syzbot+6e29a053eb165bd50de5@syzkaller.appspotmail.com Fixes: e5d5aadc ("net/smc: fix sk_refcnt underflow on linkdown and fallback") Signed-off-by:
Tony Lu <tonylu@linux.alibaba.com> Acked-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
David Howells authored
A recent patch[1] from Eric Dumazet flipped the order in which the keepalive timer and the keepalive worker were cancelled in order to fix a syzbot reported issue[2]. Unfortunately, this enables the mirror image bug whereby the timer races with rxrpc_exit_net(), restarting the worker after it has been cancelled: CPU 1 CPU 2 =============== ===================== if (rxnet->live) <INTERRUPT> rxnet->live = false; cancel_work_sync(&rxnet->peer_keepalive_work); rxrpc_queue_work(&rxnet->peer_keepalive_work); del_timer_sync(&rxnet->peer_keepalive_timer); Fix this by restoring the removed del_timer_sync() so that we try to remove the timer twice. If the timer runs again, it should see ->live == false and not restart the worker. Fixes: 1946014c ("rxrpc: fix a race in rxrpc_exit_net()") Signed-off-by:
David Howells <dhowells@redhat.com> cc: Eric Dumazet <edumazet@google.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/20220404183439.3537837-1-eric.dumazet@gmail.com/ [1] Link: https://syzkaller.appspot.com/bug?extid=724378c4bb58f703b09a [2] Reviewed-by:
-
Arun Ramadoss authored
Added the phy_poll_cable_test flag for the lan937x phy driver. Tested using command - ethtool --cable-test <dev> Fixes: 680baca5 ("net: phy: added the LAN937x phy support") Signed-off-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
- 14 Apr, 2022 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from wireless and netfilter. Current release - regressions: - smc: fix af_ops of child socket pointing to released memory - wifi: ath9k: fix usage of driver-private space in tx_info Previous releases - regressions: - ipv6: fix panic when forwarding a pkt with no in6 dev - sctp: use the correct skb for security_sctp_assoc_request - smc: fix NULL pointer dereference in smc_pnet_find_ib() - sched: fix initialization order when updating chain 0 head - phy: don't defer probe forever if PHY IRQ provider is missing - dsa: revert "net: dsa: setup master before ports" - dsa: felix: fix tagging protocol changes with multiple CPU ports - eth: ice: - fix use-after-free when freeing @rx_cpu_rmap - revert "iavf: fix deadlock occurrence during resetting VF interface" - eth: lan966x: stop processing the MAC entry is port is wrong Previous releases - always broken: - sched: - flower: fix parsing of ethertype following VLAN header - taprio: check if socket flags are valid - nfc: add flush_workqueue to prevent uaf - veth: ensure eth header is in skb's linear part - eth: stmmac: fix altr_tse_pcs function when using a fixed-link - eth: macb: restart tx only if queue pointer is lagging - eth: macvlan: fix leaking skb in source mode with nodst option" * tag 'net-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits) net: bcmgenet: Revert "Use stronger register read/writes to assure ordering" rtnetlink: Fix handling of disabled L3 stats in RTM_GETSTATS replies net: dsa: felix: fix tagging protocol changes with multiple CPU ports tun: annotate access to queue->trans_start nfc: nci: add flush_workqueue to prevent uaf net: dsa: realtek: don't parse compatible string for RTL8366S net: dsa: realtek: fix Kconfig to assure consistent driver linkage net: ftgmac100: access hardware register after clock ready Revert "net: dsa: setup master before ports" macvlan: Fix leaking skb in source mode with nodst option netfilter: nf_tables: nft_parse_register can return a negative value net: lan966x: Stop processing the MAC entry is port is wrong. net: lan966x: Fix when a port's upper is changed. net: lan966x: Fix IGMP snooping when frames have vlan tag net: lan966x: Update lan966x_ptp_get_nominal_value sctp: Initialize daddr on peeled off socket net/smc: Fix af_ops of child socket pointing to released memory net/smc: Fix NULL pointer dereference in smc_pnet_find_ib() net/smc: use memcpy instead of snprintf to avoid out of bounds read net: macb: Restart tx only if queue pointer is lagging ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This became an unexpectedly large pull request due to various regression fixes in the previous kernels. The majority of fixes are a series of patches to address the regression at probe errors in devres'ed drivers, while there are yet more fixes for the x86 SG allocations and for USB-audio buffer management. In addition, a few HD-audio quirks and other small fixes are found" * tag 'sound-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (52 commits) ALSA: usb-audio: Limit max buffer and period sizes per time ALSA: memalloc: Add fallback SG-buffer allocations for x86 ALSA: nm256: Don't call card private_free at probe error path ALSA: mtpav: Don't call card private_free at probe error path ALSA: rme9652: Fix the missing snd_card_free() call at probe error ALSA: hdspm: Fix the missing snd_card_free() call at probe error ALSA: hdsp: Fix the missing snd_card_free() call at probe error ALSA: oxygen: Fix the missing snd_card_free() call at probe error ALSA: lx6464es: Fix the missing snd_card_free() call at probe error ALSA: cmipci: Fix the missing snd_card_free() call at probe error ALSA: aw2: Fix the missing snd_card_free() call at probe error ALSA: als300: Fix the missing snd_card_free() call at probe error ALSA: lola: Fix the missing snd_card_free() call at probe error ALSA: bt87x: Fix the missing snd_card_free() call at probe error ALSA: sis7019: Fix the missing error handling ALSA: intel_hdmi: Fix the missing snd_card_free() call at probe error ALSA: via82xx: Fix the missing snd_card_free() call at probe error ALSA: sonicvibes: Fix the missing snd_card_free() call at probe error ALSA: rme96: Fix the missing snd_card_free() call at probe error ALSA: rme32: Fix the missing snd_card_free() call at probe error ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "A few more code and warning fixes. There's one feature ioctl removal patch slated for 5.18 that did not make it to the main pull request. It's just a one-liner and the ioctl has a v2 that's in use for a long time, no point to postpone it to 5.19. Late update: - remove balance v1 ioctl, superseded by v2 in 2012 Fixes: - add back cgroup attribution for compressed writes - add super block write start/end annotations to asynchronous balance - fix root reference count on an error handling path - in zoned mode, activate zone at the chunk allocation time to avoid ENOSPC due to timing issues - fix delayed allocation accounting for direct IO Warning fixes: - simplify assertion condition in zoned check - remove an unused variable" * tag 'for-5.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix btrfs_submit_compressed_write cgroup attribution btrfs: fix root ref counts in error handling in btrfs_get_root_ref btrfs: zoned: activate block group only for extent allocation btrfs: return allocated block group from do_chunk_alloc() btrfs: mark resumed async balance as writing btrfs: remove support of balance v1 ioctl btrfs: release correct delalloc amount in direct IO write path btrfs: remove unused variable in btrfs_{start,write}_dirty_block_groups() btrfs: zoned: remove redundant condition in btrfs_run_delalloc_range -
Linus Torvalds authored
Merge tag 'fscache-fixes-20220413' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull fscache fixes from David Howells: "Here's a collection of fscache and cachefiles fixes and misc small cleanups. The two main fixes are: - Add a missing unmark of the inode in-use mark in an error path. - Fix a KASAN slab-out-of-bounds error when setting the xattr on a cachefiles volume due to the wrong length being given to memcpy(). In addition, there's the removal of an unused parameter, removal of an unused Kconfig option, conditionalising a bit of procfs-related stuff and some doc fixes" * tag 'fscache-fixes-20220413' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: fscache: remove FSCACHE_OLD_API Kconfig option fscache: Use wrapper fscache_set_cache_state() directly when relinquishing fscache: Move fscache_cookies_seq_ops specific code under CONFIG_PROC_FS fscache: Remove the cookie parameter from fscache_clear_page_bits() docs: filesystems: caching/backend-api.rst: fix an object withdrawn API docs: filesystems: caching/backend-api.rst: correct two relinquish APIs use cachefiles: Fix KASAN slab-out-of-bounds in cachefiles_set_volume_xattr cachefiles: unmark inode in use in error path
-
Jianglei Nie authored
A memory chunk was allocated for orom_data in ice_get_orom_civd_data() by vzmalloc(). But when ice_read_flash_module() fails, the allocated memory is not freed, which will lead to a memory leak. We can fix it by freeing the orom_data when ce_read_flash_module() fails. Fixes: af18d886 ("ice: reduce time to read Option ROM CIVD data") Signed-off-by:
Jianglei Nie <niejianglei2021@163.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Wojciech Drewek authored
Below steps end up with crash: - modprobe ice - devlink dev eswitch set $PF1_PCI mode switchdev - echo 64 > /sys/class/net/$PF1/device/sriov_numvfs - rmmod ice Calling ice_eswitch_port_start_xmit while the process of removing VFs is in progress ends up with NULL pointer dereference. That's because PR netdev is not released but some resources are already freed. Fix it by checking if ICE_VF_DIS bit is set. Call trace: [ 1379.595146] BUG: kernel NULL pointer dereference, address: 0000000000000040 [ 1379.595284] #PF: supervisor read access in kernel mode [ 1379.595410] #PF: error_code(0x0000) - not-present page [ 1379.595535] PGD 0 P4D 0 [ 1379.595657] Oops: 0000 [#1] PREEMPT SMP PTI [ 1379.595783] CPU: 4 PID: 974 Comm: NetworkManager Kdump: loaded Tainted: G OE 5.17.0-rc8_mrq_dev-queue+ #12 [ 1379.595926] Hardware name: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.03.01.0042.013020190050 01/30/2019 [ 1379.596063] RIP: 0010:ice_eswitch_port_start_xmit+0x46/0xd0 [ice] [ 1379.596292] Code: c7 c8 09 00 00 e8 9a c9 fc ff 84 c0 0f 85 82 00 00 00 4c 89 e7 e8 ca 70 fe ff 48 8b 7d 58 48 89 c3 48 85 ff 75 5e 48 8b 53 20 <8b> 42 40 85 c0 74 78 8d 48 01 f0 0f b1 4a 40 75 f2 0f b6 95 84 00 [ 1379.596456] RSP: 0018:ffffaba0c0d7bad0 EFLAGS: 00010246 [ 1379.596584] RAX: ffff969c14c71680 RBX: ffff969c14c71680 RCX: 000100107a0f0000 [ 1379.596715] RDX: 0000000000000000 RSI: ffff969b9d631000 RDI: 0000000000000000 [ 1379.596846] RBP: ffff969c07b46500 R08: ffff969becfca8ac R09: 0000000000000001 [ 1379.596977] R10: 0000000000000004 R11: ffffaba0c0d7bbec R12: ffff969b9d631000 [ 1379.597106] R13: ffffffffc08357a0 R14: ffff969c07b46500 R15: ffff969b9d631000 [ 1379.597237] FS: 00007f72c0e25c80(0000) GS:ffff969f13500000(0000) knlGS:0000000000000000 [ 1379.597414] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1379.597562] CR2: 0000000000000040 CR3: 000000012b316006 CR4: 00000000003706e0 [ 1379.597713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1379.597863] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1379.598015] Call Trace: [ 1379.598153] <TASK> [ 1379.598294] dev_hard_start_xmit+0xd9/0x220 [ 1379.598444] sch_direct_xmit+0x8a/0x340 [ 1379.598592] __dev_queue_xmit+0xa3c/0xd30 [ 1379.598739] ? packet_parse_headers+0xb4/0xf0 [ 1379.598890] packet_sendmsg+0xa15/0x1620 [ 1379.599038] ? __check_object_size+0x46/0x140 [ 1379.599186] sock_sendmsg+0x5e/0x60 [ 1379.599330] ____sys_sendmsg+0x22c/0x270 [ 1379.599474] ? import_iovec+0x17/0x20 [ 1379.599622] ? sendmsg_copy_msghdr+0x59/0x90 [ 1379.599771] ___sys_sendmsg+0x81/0xc0 [ 1379.599917] ? __pollwait+0xd0/0xd0 [ 1379.600061] ? preempt_count_add+0x68/0xa0 [ 1379.600210] ? _raw_write_lock_irq+0x1a/0x40 [ 1379.600369] ? ep_done_scan+0xc9/0x110 [ 1379.600494] ? _raw_spin_unlock_irqrestore+0x25/0x40 [ 1379.600622] ? preempt_count_add+0x68/0xa0 [ 1379.600747] ? _raw_spin_lock_irq+0x1a/0x40 [ 1379.600899] ? __fget_light+0x8f/0x110 [ 1379.601024] __sys_sendmsg+0x49/0x80 [ 1379.601148] ? release_ds_buffers+0x50/0xe0 [ 1379.601274] do_syscall_64+0x3b/0x90 [ 1379.601399] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 1379.601525] RIP: 0033:0x7f72c1e2e35d Fixes: f5396b8a ("ice: switchdev slow path") Signed-off-by:
Wojciech Drewek <wojciech.drewek@intel.com> Reported-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by:
Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by:
-
Maciej Fijalkowski authored
Currently for !CONFIG_NET_SWITCHDEV kernel builds it is not possible to create VFs properly as call to ice_eswitch_configure() returns -EOPNOTSUPP for us. This is because CONFIG_ICE_SWITCHDEV depends on CONFIG_NET_SWITCHDEV. Change the ice_eswitch_configure() implementation for !CONFIG_ICE_SWITCHDEV to return 0 instead -EOPNOTSUPP and let ice_ena_vfs() finish its work properly. CC: Grzegorz Nitka <grzegorz.nitka@intel.com> Fixes: 1a1c40df ("ice: set and release switchdev environment") Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
Michal Swiatkowski <michal.swiatkowski@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
-
Maciej Fijalkowski authored
__ice_alloc_rx_bufs_zc() checks if a number of the descriptors to be allocated would cause the ring wrap. In that case, driver will issue two calls to xsk_buff_alloc_batch() - one that will fill the ring up to the end and the second one that will start with filling descriptors from the beginning of the ring. ice_fill_rx_descs() is a wrapper for taking care of what xsk_buff_alloc_batch() gave back to the driver. It works in a best effort approach, so for example when driver asks for 64 buffers, ice_fill_rx_descs() could assign only 32. Such case needs to be checked when ring is being filled up to the end, because in that situation ntu might not reached the end of the ring. Fix the ring wrap by checking if nb_buffs_extra has the expected value. If not, bump ntu and go directly to tail update. Fixes: 3876ff52 ("ice: xsk: Handle SW XDP ring wrap and bump tail more often") Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
Shwetha Nagaraju <Shwetha.nagaraju@intel.com> Signed-off-by:
-
Jeremy Linton authored
It turns out after digging deeper into this bug, that it was being triggered by GCC12 failing to call the bcmgenet_enable_dma() routine. Given that a gcc12 fix has been merged [1] and the genet driver now works properly when built with gcc12, this commit should be reverted. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105160 https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=aabb9a261ef060cf24fd626713f1d7d9df81aa57 Fixes: 8d3ea3d4 ("net: bcmgenet: Use stronger register read/writes to assure ordering") Signed-off-by:
Jeremy Linton <jeremy.linton@arm.com> Acked-by:
-
Petr Machata authored
When L3 stats are disabled, rtnl_offload_xstats_get_size_stats() returns size of 0, which is supposed to be an indication that the corresponding attribute should not be emitted. However, instead, the current code reserves a 0-byte attribute. The reason this does not show up as a citation on a kasan kernel is that netdev_offload_xstats_get(), which is supposed to fill in the data, never ends up getting called, because rtnl_offload_xstats_get_stats() notices that the stats are not actually used and skips the call. Thus a zero-length IFLA_OFFLOAD_XSTATS_L3_STATS attribute ends up in a response, confusing the userspace. Fix by skipping the L3-stats related block in rtnl_offload_xstats_fill(). Fixes: 0e7788fd ("net: rtnetlink: Add UAPI for obtaining L3 offload xstats") Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/591b58e7623edc3eb66dd1fcfa8c8f133d090974.1649794741.git.petrm@nvidia.comSigned-off-by:
-
Vladimir Oltean authored
When the device tree has 2 CPU ports defined, a single one is active (has any dp->cpu_dp pointers point to it). Yet the second one is still a CPU port, and DSA still calls ->change_tag_protocol on it. On the NXP LS1028A, the CPU ports are ports 4 and 5. Port 4 is the active CPU port and port 5 is inactive. After the following commands: # Initial setting cat /sys/class/net/eno2/dsa/tagging ocelot echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging echo ocelot > /sys/class/net/eno2/dsa/tagging traffic is now broken, because the driver has moved the NPI port from port 4 to port 5, unbeknown to DSA. The problem can be avoided by detecting that the second CPU port is unused, and not doing anything for it. Further rework will be needed when proper support for multiple CPU ports is added. Treat this as a bug and prepare current kernels to work in single-CPU mode with multiple-CPU DT blobs. Fixes: adb3dccf ("net: dsa: felix: convert to the new .change_tag_protocol DSA API") Signed-off-by:
-
Antoine Tenart authored
Commit 5337824f ("net: annotate accesses to queue->trans_start") introduced a new helper, txq_trans_cond_update, to update queue->trans_start using WRITE_ONCE. One snippet in drivers/net/tun.c was missed, as it was introduced roughly at the same time. Fixes: 5337824f ("net: annotate accesses to queue->trans_start") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Antoine Tenart <atenart@kernel.org> Reviewed-by:
-
