- 05 Jun, 2017 11 commits
-
-
Paul Burton authored
commit 096a0de4 upstream. is_jump_ins() checks for plain jump ("j") instructions since commit e7438c4b ("MIPS: Fix sibling call handling in get_frame_info") but that commit didn't make the same change to the microMIPS code, leaving it inconsistent with the MIPS32/MIPS64 code. Handle the microMIPS encoding of the jump instruction too such that it behaves consistently. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Fixes: e7438c4b ("MIPS: Fix sibling call handling in get_frame_info") Cc: Tony Wu <tung7970@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14533/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Paul Burton authored
commit bb9bc468 upstream. get_frame_info() calculates the offset of the return address within a stack frame simply by dividing a the bottom 16 bits of the instruction, treated as a signed integer, by the size of a long. Whilst this works for MIPS32 & MIPS64 ISAs where the sw or sd instructions are used, it's incorrect for microMIPS where encodings differ. The result is that we typically completely fail to unwind the stack on microMIPS. Fix this by adjusting is_ra_save_ins() to calculate the return address offset, and take into account the various different encodings there in the same place as we consider whether an instruction is storing the ra/$31 register. With this we are now able to unwind the stack for kernels targetting the microMIPS ISA, for example we can produce: Call Trace: [<80109e1f>] show_stack+0x63/0x7c [<8011ea17>] __warn+0x9b/0xac [<8011ea45>] warn_slowpath_fmt+0x1d/0x20 [<8013fe53>] register_console+0x43/0x314 [<8067c58d>] of_setup_earlycon+0x1dd/0x1ec [<8067f63f>] early_init_dt_scan_chosen_stdout+0xe7/0xf8 [<8066c115>] do_early_param+0x75/0xac [<801302f9>] parse_args+0x1dd/0x308 [<8066c459>] parse_early_options+0x25/0x28 [<8066c48b>] parse_early_param+0x2f/0x38 [<8066e8cf>] setup_arch+0x113/0x488 [<8066c4f3>] start_kernel+0x57/0x328 ---[ end trace 0000000000000000 ]--- Whereas previously we only produced: Call Trace: [<80109e1f>] show_stack+0x63/0x7c ---[ end trace 0000000000000000 ]--- Signed-off-by:
-
Paul Burton authored
commit 67c75057 upstream. is_jump_ins() checks 16b instruction fields without verifying that the instruction is indeed 16b, as is done by is_ra_save_ins() & is_sp_move_ins(). Add the appropriate check. Signed-off-by:
-
Paul Burton authored
commit b6c7a324 upstream. get_frame_info() is meant to iterate over up to the first 128 instructions within a function, but for microMIPS kernels it will not reach that many instructions unless the function is 512 bytes long since we calculate the maximum number of instructions to check by dividing the function length by the 4 byte size of a union mips_instruction. In microMIPS kernels this won't do since instructions are variable length. Fix this by instead checking whether the pointer to the current instruction has reached the end of the function, and use max_insns as a simple constant to check the number of iterations against. Signed-off-by:
-
Paul Burton authored
commit a3552dac upstream. During stack unwinding we call a number of functions to determine what type of instruction we're looking at. The union mips_instruction pointer provided to them may be pointing at a 2 byte, but not 4 byte, aligned address & we thus cannot directly access the 4 byte wide members of the union mips_instruction. To avoid this is_ra_save_ins() copies the required half-words of the microMIPS instruction to a correctly aligned union mips_instruction on the stack, which it can then access safely. The is_jump_ins() & is_sp_move_ins() functions do not correctly perform this temporary copy, and instead attempt to directly dereference 4 byte fields which may be misaligned and lead to an address exception. Fix this by copying the instruction halfwords to a temporary union mips_instruction in get_frame_info() such that we can provide a 4 byte aligned union mips_instruction to the is_*_ins() functions and they do not need to deal with misalignment themselves. Signed-off-by:
-
Paul Burton authored
commit ccaf7caf upstream. get_frame_info() can be called in microMIPS kernels with the ISA bit already clear. For example this happens when unwind_stack_by_address() is called because we begin with a PC that has the ISA bit set & subtract the (odd) offset from the preceding symbol (which does not have the ISA bit set). Since get_frame_info() unconditionally subtracts 1 from the PC in microMIPS kernels it incorrectly misaligns the address it then attempts to access code at, leading to an address error exception. Fix this by using msk_isa16_mode() to clear the ISA bit, which allows get_frame_info() to function regardless of whether it is provided with a PC that has the ISA bit set or not. Signed-off-by:
-
Ping-Ke Shih authored
commit 40b368af upstream. The addresses of Wlan NIC registers are natural alignment, but some drivers have bugs. These are evident on platforms that need natural alignment to access registers. This change contains the following: 1. Function _rtl8821ae_dbi_read() is used to read one byte from DBI, thus it should use rtl_read_byte(). 2. Register 0x4C7 of 8192ee is single byte. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: adjust filenames] Signed-off-by:
-
Marcin Niestroj authored
commit 1b211d48 upstream. Datasheet of each device (lps331ap, lps25h, lps001wp, lps22hb) says that the pressure and temperature data is a 2's complement. I'm sending this the slow way, as negative pressures on these are pretty unusual and the nature of the fixing of multiple device introduction patches will make it hard to apply to older kernels - Jonathan. Fixes: 217494e5 ("iio:pressure: Add STMicroelectronics pressures driver") Fixes: 2f5effcb ("iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor") Fixes: 7885a8ce ("iio: pressure: st: Add support for new LPS001WP pressure sensor") Fixes: e039e2f5 ("iio:st_pressure:initial lps22hb sensor support") Signed-off-by:
Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> [bwh: Backported to 3.16: drop change in st_press_lps22hb_channels] Signed-off-by:
-
Dan Carpenter authored
commit c705a6b3 upstream. We accidentally return success when adm8211_alloc_rings() fails but we should preserve the error code. Fixes: cc0b88cf ("[PATCH] Add adm8211 802.11b wireless driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Nicholas Mc Guire authored
commit 15a43cbf upstream. udelay_range(1, 2) is inefficient and as discussions with Jani Nikula <jani.nikula@linux.intel.com> unnecessary here. This replaces this tight setting with a relaxed delay of min=20 and max=50 which helps the hrtimer subsystem optimize timer handling. Fixes: commit be4fc046 ("drm/i915: add VLV DSI PLL Calculations") Link: http://lkml.org/lkml/2016/12/15/147Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Michal Hocko authored
This is a stable follow up fix for an incorrect backport. The issue is not present in the upstream kernel. Miroslav has noticed the following splat when testing my 3.2 forward port of 8310d48b ("mm/huge_memory.c: respect FOLL_FORCE/FOLL_COW for thp") to 3.12: BUG: Bad page state in process a.out pfn:26400 page:ffffea000085e000 count:0 mapcount:1 mapping: (null) index:0x7f049d600 page flags: 0x1fffff80108018(uptodate|dirty|head|swapbacked) page dumped because: nonzero mapcount [iii] CPU: 2 PID: 5926 Comm: a.out Tainted: G E 3.12.61-0-default #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 0000000000000000 ffffffff81515830 ffffea000085e000 ffffffff81800ad7 ffffffff815118a5 ffffea000085e000 0000000000000000 000fffff80000000 ffffffff81140f18 fff000007c000000 ffffea000085e000 0000000000000009 Call Trace: [<ffffffff8100475d>] dump_trace+0x7d/0x2d0 [<ffffffff81004a44>] show_stack_log_lvl+0x94/0x170 [<ffffffff81005ce1>] show_stack+0x21/0x50 [<ffffffff81515830>] dump_stack+0x5d/0x78 [<ffffffff815118a5>] bad_page.part.67+0xe8/0x102 [<ffffffff81140f18>] free_pages_prepare+0x198/0x1b0 [<ffffffff81141275>] __free_pages_ok+0x15/0xd0 [<ffffffff8116444c>] __access_remote_vm+0x7c/0x1e0 [<ffffffff81205afb>] mem_rw.isra.13+0x14b/0x1a0 [<ffffffff811a3b18>] vfs_write+0xb8/0x1e0 [<ffffffff811a469b>] SyS_pwrite64+0x6b/0xa0 [<ffffffff81523b49>] system_call_fastpath+0x16/0x1b [<00007f049da18573>] 0x7f049da18572 The problem is that the original 3.2 backport didn't return NULL page on the FOLL_COW page and so the page got reused. Reported-and-tested-by:
Miroslav Beneš <mbenes@suse.com> Signed-off-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
- 04 Apr, 2017 27 commits
-
-
Ben Hutchings authored
-
Ben Hutchings authored
The "dead" key type has no match operation, and a search for keys of this type can cause a null dereference in keyring_search_iterator(). keyring_search() has a check for this, but request_keyring_and_link() does not. Move the check into keyring_search_aux(), covering both of them. This was fixed upstream by commit c06cfb08 ("KEYS: Remove key_type::match in favour of overriding default by match_preparse"), part of a series of large changes that are not suitable for backporting. CVE-2017-2647 / CVE-2017-6951 Reported-by:
Igor Redko <redkoi@virtuozzo.com> Reported-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> References: https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2017-2647Reported-by:
idl3r <idler1984@gmail.com> References: https://www.spinics.net/lists/keyrings/msg01845.htmlSigned-off-by:
-
Jann Horn authored
commit 22f6b4d3 upstream. This ensures that do_mmap() won't implicitly make AIO memory mappings executable if the READ_IMPLIES_EXEC personality flag is set. Such behavior is problematic because the security_mmap_file LSM hook doesn't catch this case, potentially permitting an attacker to bypass a W^X policy enforced by SELinux. I have tested the patch on my machine. To test the behavior, compile and run this: #define _GNU_SOURCE #include <unistd.h> #include <sys/personality.h> #include <linux/aio_abi.h> #include <err.h> #include <stdlib.h> #include <stdio.h> #include <sys/syscall.h> int main(void) { personality(READ_IMPLIES_EXEC); aio_context_t ctx = 0; if (syscall(__NR_io_setup, 1, &ctx)) err(1, "io_setup"); char cmd[1000]; sprintf(cmd, "cat /proc/%d/maps | grep -F '/[aio]'", (int)getpid()); system(cmd); return 0; } In the output, "rw-s" is good, "rwxs" is bad. Signed-off-by:
Jann Horn <jann@thejh.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.16: we don't have super_block::s_iflags; use file_system_type::fs_flags instead] Signed-off-by:
-
Eric W. Biederman authored
commit 22f6b4d3 upstream. Today proc and sysfs do not contain any executable files. Several applications today mount proc or sysfs without noexec and nosuid and then depend on there being no exectuables files on proc or sysfs. Having any executable files show on proc or sysfs would cause a user space visible regression, and most likely security problems. Therefore commit to never allowing executables on proc and sysfs by adding a new flag to mark them as filesystems without executables and enforce that flag. Test the flag where MNT_NOEXEC is tested today, so that the only user visible effect will be that exectuables will be treated as if the execute bit is cleared. The filesystems proc and sysfs do not currently incoporate any executable files so this does not result in any user visible effects. This makes it unnecessary to vet changes to proc and sysfs tightly for adding exectuable files or changes to chattr that would modify existing files, as no matter what the individual file say they will not be treated as exectuable files by the vfs. Not having to vet changes to closely is important as without this we are only one proc_create call (or another goof up in the implementation of notify_change) from having problematic executables on proc. Those mistakes are all too easy to make and would create a situation where there are security issues or the assumptions of some program having to be broken (and cause userspace regressions). Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> [bwh: Backported to 3.16: we don't have super_block::s_iflags; use file_system_type::fs_flags instead] Signed-off-by:
-
Florian Westphal authored
commit d1b4c689 upstream. mmapped netlink has a number of unresolved issues: - TX zerocopy support had to be disabled more than a year ago via commit 4682a035 ("netlink: Always copy on mmap TX.") because the content of the mmapped area can change after netlink attribute validation but before message processing. - RX support was implemented mainly to speed up nfqueue dumping packet payload to userspace. However, since commit ae08ce00 ("netfilter: nfnetlink_queue: zero copy support") we avoid one copy with the socket-based interface too (via the skb_zerocopy helper). The other problem is that skbs attached to mmaped netlink socket behave different from normal skbs: - they don't have a shinfo area, so all functions that use skb_shinfo() (e.g. skb_clone) cannot be used. - reserving headroom prevents userspace from seeing the content as it expects message to start at skb->head. See for instance commit aa3a0220 ("netlink: not trim skb for mmaped socket when dump"). - skbs handed e.g. to netlink_ack must have non-NULL skb->sk, else we crash because it needs the sk to check if a tx ring is attached. Also not obvious, leads to non-intuitive bug fixes such as 7c7bdf35 ("netfilter: nfnetlink: use original skbuff when acking batches"). mmaped netlink also didn't play nicely with the skb_zerocopy helper used by nfqueue and openvswitch. Daniel Borkmann fixed this via commit 6bb0fef4 ("netlink, mmap: fix edge-case leakages in nf queue zero-copy")' but at the cost of also needing to provide remaining length to the allocation function. nfqueue also has problems when used with mmaped rx netlink: - mmaped netlink doesn't allow use of nfqueue batch verdict messages. Problem is that in the mmap case, the allocation time also determines the ordering in which the frame will be seen by userspace (A allocating before B means that A is located in earlier ring slot, but this also means that B might get a lower sequence number then A since seqno is decided later. To fix this we would need to extend the spinlocked region to also cover the allocation and message setup which isn't desirable. - nfqueue can now be configured to queue large (GSO) skbs to userspace. Queing GSO packets is faster than having to force a software segmentation in the kernel, so this is a desirable option. However, with a mmap based ring one has to use 64kb per ring slot element, else mmap has to fall back to the socket path (NL_MMAP_STATUS_COPY) for all large packets. To use the mmap interface, userspace not only has to probe for mmap netlink support, it also has to implement a recv/socket receive path in order to handle messages that exceed the size of an rx ring element. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ken-ichirou MATSUZAWA <chamaken@gmail.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: deleted code and documentation is different in places] Signed-off-by:
-
James C Boyd authored
commit 09a5c34e upstream. GCC reports a -Wlogical-not-parentheses warning here; therefore add parentheses to shut it up and to express our intent more. Signed-off-by:
James C Boyd <jcboyd.dev@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Ralf Baechle authored
commit 640465bd upstream. This wasn't happening in all cases. Signed-off-by:
-
John Crispin authored
commit 9c48568b upstream. Over the years the code has been changed various times leading to argc/argv being defined in a different function to where we actually use the variables. Clean this up by moving them to prom_init_cmdline(). Signed-off-by:
John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14902/Signed-off-by:
-
Fabio Estevam authored
commit 1ff5b64d upstream. When building multi_v7_defconfig with CONFIG_ARM_LPAE=y the following warning is seen: drivers/tty/serial/samsung.c: In function 's3c24xx_serial_init_port': drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat] Use %pa to print 'resource_size_t' type to fix the warning. Reported-by:
Olof's autobuilder <build@lixom.net> Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Arnd Bergmann authored
commit d34712d2 upstream. The sunxi mmc driver tries to calculate a dma address by using pointer arithmetic, which causes a warning when dma_addr_t is wider than a pointer: drivers/mmc/host/sunxi-mmc.c: In function 'sunxi_mmc_init_idma_des': drivers/mmc/host/sunxi-mmc.c:296:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] struct sunxi_idma_des *pdes_pa = (struct sunxi_idma_des *)host->sg_dma; ^ To avoid this warning and to simplify the logic, this changes the code to avoid the cast and calculate the correct address manually. The behavior should be unchanged. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
David Lanzendörfer <david.lanzendoerfer@o2s.ch> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Andre Przywara authored
commit c7757074 upstream. The brand new GCC 5.1.0 warns by default on using a boolean in the switch condition. This results in the following warning: fs/nfs/nfs4proc.c: In function 'nfs4_proc_get_rootfh': fs/nfs/nfs4proc.c:3100:10: warning: switch condition has boolean value [-Wswitch-bool] switch (auth_probe) { ^ This code was obviously using switch to make use of the fall-through semantics (without the usual comment, though). Rewrite that code using if statements to avoid the warning and make the code a bit more readable on the way. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Arnd Bergmann authored
commit 7d6e9105 upstream. An ancient gcc bug (first reported in 2003) has apparently resurfaced on MIPS, where kernelci.org reports an overly large stack frame in the whirlpool hash algorithm: crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] With some testing in different configurations, I'm seeing large variations in stack frames size up to 1500 bytes for what should have around 300 bytes at most. I also checked the reference implementation, which is essentially the same code but also comes with some test and benchmarking infrastructure. It seems that recent compiler versions on at least arm, arm64 and powerpc have a partial fix for this problem, but enabling "-fsched-pressure", but even with that fix they suffer from the issue to a certain degree. Some testing on arm64 shows that the time needed to hash a given amount of data is roughly proportional to the stack frame size here, which makes sense given that the wp512 implementation is doing lots of loads for table lookups, and the problem with the overly large stack is a result of doing a lot more loads and stores for spilled registers (as seen from inspecting the object code). Disabling -fschedule-insns consistently fixes the problem for wp512, in my collection of cross-compilers, the results are consistently better or identical when comparing the stack sizes in this function, though some architectures (notable x86) have schedule-insns disabled by default. The four columns are: default: -O2 press: -O2 -fsched-pressure nopress: -O2 -fschedule-insns -fno-sched-pressure nosched: -O2 -no-schedule-insns (disables sched-pressure) default press nopress nosched alpha-linux-gcc-4.9.3 1136 848 1136 176 am33_2.0-linux-gcc-4.9.3 2100 2076 2100 2104 arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352 cris-linux-gcc-4.9.3 272 272 272 272 frv-linux-gcc-4.9.3 1128 1000 1128 280 hppa64-linux-gcc-4.9.3 1128 336 1128 184 hppa-linux-gcc-4.9.3 644 308 644 276 i386-linux-gcc-4.9.3 352 352 352 352 m32r-linux-gcc-4.9.3 720 656 720 268 microblaze-linux-gcc-4.9.3 1108 604 1108 256 mips64-linux-gcc-4.9.3 1328 592 1328 208 mips-linux-gcc-4.9.3 1096 624 1096 240 powerpc64-linux-gcc-4.9.3 1088 432 1088 160 powerpc-linux-gcc-4.9.3 1080 584 1080 224 s390-linux-gcc-4.9.3 456 456 624 360 sh3-linux-gcc-4.9.3 292 292 292 292 sparc64-linux-gcc-4.9.3 992 240 992 208 sparc-linux-gcc-4.9.3 680 592 680 312 x86_64-linux-gcc-4.9.3 224 240 272 224 xtensa-linux-gcc-4.9.3 1152 704 1152 304 aarch64-linux-gcc-7.0.0 224 224 1104 208 arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352 mips-linux-gcc-7.0.0 1120 648 1120 272 x86_64-linux-gcc-7.0.1 240 240 304 240 arm-linux-gnueabi-gcc-4.4.7 840 392 arm-linux-gnueabi-gcc-4.5.4 784 728 784 320 arm-linux-gnueabi-gcc-4.6.4 736 728 736 304 arm-linux-gnueabi-gcc-4.7.4 944 784 944 352 arm-linux-gnueabi-gcc-4.8.5 464 464 760 352 arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352 arm-linux-gnueabi-gcc-5.3.1 824 824 1064 336 arm-linux-gnueabi-gcc-6.1.1 808 808 1056 344 arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352 Trying the same test for serpent-generic, the picture is a bit different, and while -fno-schedule-insns is generally better here than the default, -fsched-pressure wins overall, so I picked that instead. default press nopress nosched alpha-linux-gcc-4.9.3 1392 864 1392 960 am33_2.0-linux-gcc-4.9.3 536 524 536 528 arm-linux-gnueabi-gcc-4.9.3 552 552 776 536 cris-linux-gcc-4.9.3 528 528 528 528 frv-linux-gcc-4.9.3 536 400 536 504 hppa64-linux-gcc-4.9.3 524 208 524 480 hppa-linux-gcc-4.9.3 768 472 768 508 i386-linux-gcc-4.9.3 564 564 564 564 m32r-linux-gcc-4.9.3 712 576 712 532 microblaze-linux-gcc-4.9.3 724 392 724 512 mips64-linux-gcc-4.9.3 720 384 720 496 mips-linux-gcc-4.9.3 728 384 728 496 powerpc64-linux-gcc-4.9.3 704 304 704 480 powerpc-linux-gcc-4.9.3 704 296 704 480 s390-linux-gcc-4.9.3 560 560 592 536 sh3-linux-gcc-4.9.3 540 540 540 540 sparc64-linux-gcc-4.9.3 544 352 544 496 sparc-linux-gcc-4.9.3 544 344 544 496 x86_64-linux-gcc-4.9.3 528 536 576 528 xtensa-linux-gcc-4.9.3 752 544 752 544 aarch64-linux-gcc-7.0.0 432 432 656 480 arm-linux-gnueabi-gcc-7.0.1 616 616 808 536 mips-linux-gcc-7.0.0 720 464 720 488 x86_64-linux-gcc-7.0.1 536 528 600 536 arm-linux-gnueabi-gcc-4.4.7 592 440 arm-linux-gnueabi-gcc-4.5.4 776 448 776 544 arm-linux-gnueabi-gcc-4.6.4 776 448 776 544 arm-linux-gnueabi-gcc-4.7.4 768 448 768 544 arm-linux-gnueabi-gcc-4.8.5 488 488 776 544 arm-linux-gnueabi-gcc-4.9.3 552 552 776 536 arm-linux-gnueabi-gcc-5.3.1 552 552 776 536 arm-linux-gnueabi-gcc-6.1.1 560 560 776 536 arm-linux-gnueabi-gcc-7.0.1 616 616 808 536 I did not do any runtime tests with serpent, so it is possible that stack frame size does not directly correlate with runtime performance here and it actually makes things worse, but it's more likely to help here, and the reduced stack frame size is probably enough reason to apply the patch, especially given that the crypto code is often used in deep call chains. Link: https://kernelci.org/build/id/58797d7559b5149efdf6c3a9/logs/ Link: http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=11488 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149 Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Tillmann Heidsieck authored
commit cbb41b91 upstream. Fix a smatch warning: drivers/atm/iphase.c:1178 rx_pkt() warn: curly braces intended? The code is correct, the indention is misleading. In case the allocation of skb fails, we want to skip to the end. Signed-off-by:
Tillmann Heidsieck <theidsieck@leenox.de> Signed-off-by:
-
Paul Burton authored
commit e1bebbab upstream. Uses of the cfcmsa & ctcmsa instructions were not being wrapped by a macro in the case where the toolchain supports MSA, since the arguments exactly match a typical use of the instructions. However using current toolchains this leads to errors such as: arch/mips/kernel/genex.S:437: Error: opcode not supported on this processor: mips32r2 (mips32r2) `cfcmsa $5,1' Thus uses of the instructions must be in the context of a ".set msa" directive, however doing that from the users of the instructions would be messy due to the possibility that the toolchain does not support MSA. Fix this by renaming the macros (prepending an underscore) in order to avoid recursion when attempting to emit the instructions, and provide implementations for the TOOLCHAIN_SUPPORTS_MSA case which ".set msa" as appropriate. Signed-off-by:
-
Paul Burton authored
commit a3a49810 upstream. Recursive macros made the code more concise & worked great for the case where the toolchain doesn't support MSA. However, with toolchains which do support MSA they lead to build failures such as: arch/mips/kernel/r4k_switch.S: Assembler messages: arch/mips/kernel/r4k_switch.S:148: Error: invalid operands `insert.w $w(0+1)[2],$1' arch/mips/kernel/r4k_switch.S:148: Error: invalid operands `insert.w $w(0+1)[3],$1' arch/mips/kernel/r4k_switch.S:148: Error: invalid operands `insert.w $w((0+1)+1)[2],$1' arch/mips/kernel/r4k_switch.S:148: Error: invalid operands `insert.w $w((0+1)+1)[3],$1' ... Drop the recursion from msa_init_all_upper invoking the msa_init_upper macro explicitly for each vector register. Signed-off-by:
-
Paul Burton authored
commit f23ce388 upstream. Assuming at ($1) as the source or destination register of copy or insert instructions: - Simplifies the macros providing those instructions for toolchains without MSA support. - Avoids an unnecessary move instruction when at is used as the source or destination register anyway. - Is sufficient for the uses to be introduced in the kernel by a subsequent patch. Note that due to a patch ordering snafu on my part this also fixes the currently broken build with MSA support enabled. The build has been broken since commit c9017757 "MIPS: init upper 64b of vector registers when MSA is first used", which this patch should have preceeded. Signed-off-by:
-
Paul Burton authored
commit 631afc65 upstream. The {save,restore}_fp_context{,32} functions require that the assembler allows the use of sdc instructions on any FP register, and this is acomplished by setting the arch to mips64r2 or mips64r6 (using MIPS_ISA_ARCH_LEVEL_RAW). However this has the effect of enabling the assembler to use mips64 instructions in the expansion of pseudo-instructions. This was done in the (now-reverted) commit eec43a22 "MIPS: Save/restore MSA context around signals" which led to my mistakenly believing that there was an assembler bug, when in reality the assembler was just emitting mips64 instructions. Avoid the issue for future commits which will add code to r4k_fpu.S by pushing the .set MIPS_ISA_ARCH_LEVEL_RAW directives into the functions that require it, and remove the spurious assertion declaring the assembler bug. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9612/Signed-off-by:
-
James Hogan authored
commit d76e9b9f upstream. Commit 842dfc11 ("MIPS: Fix build with binutils 2.24.51+") in v3.18 enabled -msoft-float and sprinkled ".set hardfloat" where necessary to use FP instructions. However it missed enable_restore_fp_context() which since v3.17 does a ctc1 with inline assembly, causing the following assembler errors on Mentor's 2014.05 toolchain: {standard input}: Assembler messages: {standard input}:2913: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ctc1 $2,$31' scripts/Makefile.build:257: recipe for target 'arch/mips/kernel/traps.o' failed Fix that to use the new write_32bit_cp1_register() macro so that ".set hardfloat" is automatically added when -msoft-float is in use. Fixes 842dfc11 ("MIPS: Fix build with binutils 2.24.51+") Signed-off-by:
-
James Hogan authored
commit 5e32033e upstream. Add a write_32bit_cp1_register() macro to compliment the read_32bit_cp1_register() macro. This is to abstract whether .set hardfloat needs to be used based on GAS_HAS_SET_HARDFLOAT. The implementation of _read_32bit_cp1_register() .sets mips1 due to failure of gas v2.19 to assemble cfc1 for Octeon (see commit 25c30003 ("MIPS: Override assembler target architecture for octeon.")). I haven't copied this over to _write_32bit_cp1_register() as I'm uncertain whether it applies to ctc1 too, or whether anybody cares about that version of binutils any longer. Signed-off-by:
-
Manuel Lauss authored
commit 842dfc11 upstream. Starting with version 2.24.51.20140728 MIPS binutils complain loudly about mixing soft-float and hard-float object files, leading to this build failure since GCC is invoked with "-msoft-float" on MIPS: {standard input}: Warning: .gnu_attribute 4,3 requires `softfloat' LD arch/mips/alchemy/common/built-in.o mipsel-softfloat-linux-gnu-ld: Warning: arch/mips/alchemy/common/built-in.o uses -msoft-float (set by arch/mips/alchemy/common/prom.o), arch/mips/alchemy/common/sleeper.o uses -mhard-float To fix this, we detect if GAS is new enough to support "-msoft-float" command option, and if it does, we can let GCC pass it to GAS; but then we also need to sprinkle the files which make use of floating point registers with the necessary ".set hardfloat" directives. Signed-off-by:
Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: Markos Chandras <Markos.Chandras@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/8355/Signed-off-by:
-
Paul Burton authored
commit c9017757 upstream. When a task first makes use of MSA we need to ensure that the upper 64b of the vector registers are set to some value such that no information can be leaked to it from the previous task to use MSA context on the CPU. The architecture formerly specified that these bits would be cleared to 0 when a scalar FP instructions wrote to the aliased FP registers, which would have implicitly handled this as the kernel restored scalar FP context. However more recent versions of the specification now state that the value of the bits in such cases is unpredictable. Initialise them explictly to be sure, and set all the bits to 1 rather than 0 for consistency with the least significant 64b. Signed-off-by:
-
Paul Burton authored
commit 33c771ba upstream. The kernel depends upon MSA never being enabled when the FPU is not, a condition which is currently violated in a few places (whilst saving sigcontext, following mips_cpu_save). Catch all the problem cases by disabling MSA in lose_fpu, after saving context if necessary. Signed-off-by:
-
Paul Burton authored
commit b8340673 upstream. Switching the vector context implicitly saves & restores the state of the aliased scalar FP data registers, however the scalar FP control & status register is distinct from the MSA control & status register. In order to allow scalar FP to function correctly in programs using MSA, the scalar CSR needs to be saved & restored along with the MSA vector context. Signed-off-by:
-
Paul Burton authored
commit f7a46fa7 upstream. I added a field for the MSACSR register in struct mips_fpu_struct, but never actually made use of it... This is a clear bug. Save and restore the MSACSR register along with the vector registers. Signed-off-by:
-
Paul Burton authored
commit 558155a0 upstream. Just #ifdef away the C functions when included from an assembly file, as will be done in a following commit. Signed-off-by:
-
Linus Torvalds authored
commit 10fbd36e upstream. rq_data_dir() returns either READ or WRITE (0 == READ, 1 == WRITE), not a boolean value. Now, admittedly the "!= 0" doesn't really change the value (0 stays as zero, 1 stays as one), but it's not only redundant, it confuses gcc, and causes gcc to warn about the construct switch (rq_data_dir(req)) { case READ: ... case WRITE: ... that we have in a few drivers. Now, the gcc warning is silly and stupid (it seems to warn not about the switch value having a different type from the case statements, but about _any_ boolean switch value), but in this case the code itself is silly and stupid too, so let's just change it, and get rid of warnings like this: drivers/block/hd.c: In function ‘hd_request’: drivers/block/hd.c:630:11: warning: switch condition has boolean value [-Wswitch-bool] switch (rq_data_dir(req)) { The odd '!= 0' came in when "cmd_flags" got turned into a "u64" in commit 5953316d ("block: make rq->cmd_flags be 64-bit") and is presumably because the old code (that just did a logical 'and' with 1) would then end up making the type of rq_data_dir() be u64 too. But if we want to retain the old regular integer type, let's just cast the result to 'int' rather than use that rather odd '!= 0'. Signed-off-by:
-
Tim Gardner authored
commit b8850d1f upstream. The gcc version 4.9.1 compiler complains Even though it isn't possible for these variables to not get initialized before they are used. fs/namespace.c: In function ‘SyS_mount’: fs/namespace.c:2720:8: warning: ‘kernel_dev’ may be used uninitialized in this function [-Wmaybe-uninitialized] ret = do_mount(kernel_dev, kernel_dir->name, kernel_type, flags, ^ fs/namespace.c:2699:8: note: ‘kernel_dev’ was declared here char *kernel_dev; ^ fs/namespace.c:2720:8: warning: ‘kernel_type’ may be used uninitialized in this function [-Wmaybe-uninitialized] ret = do_mount(kernel_dev, kernel_dir->name, kernel_type, flags, ^ fs/namespace.c:2697:8: note: ‘kernel_type’ was declared here char *kernel_type; ^ Fix the warnings by simplifying copy_mount_string() as suggested by Al Viro. Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
- 16 Mar, 2017 2 commits
-
-
Ben Hutchings authored
-
Alexander Popov authored
commit 82f2341c upstream. Currently N_HDLC line discipline uses a self-made singly linked list for data buffers and has n_hdlc.tbuf pointer for buffer retransmitting after an error. The commit be10eb75 ("tty: n_hdlc add buffer flushing") introduced racy access to n_hdlc.tbuf. After tx error concurrent flush_tx_queue() and n_hdlc_send_frames() can put one data buffer to tx_free_buf_list twice. That causes double free in n_hdlc_release(). Let's use standard kernel linked list and get rid of n_hdlc.tbuf: in case of tx error put current data buffer after the head of tx_buf_list. Signed-off-by:
Alexander Popov <alex.popov@linux.com> Signed-off-by:
-
