During register_device() init sequence is,
(a) register with rdma cgroup followed by
(b) register with sysfs

Therefore, unregister_device() sequence should follow the reverse order.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Lockdep engine handles correctly downgrade of locks and it simply
incorrect to disable lockdep checks prior to calling mmu_notifier.

Remove lockdep_off and ensure locks correctness.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Even though device registration/unregistration and client
registration/unregistration is not a performance path, define the
client_data_lock as rwlock for code clarity.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

add_client_context(), ib_unregister_device() and ib_unregister_client()
are designed to call from blocking context.  There is no need to save and
restore last interrupt state when called from such blocking context.  Even
though this is not a performance path, using the right spin lock API is
desired for code clarity.

To avoid checkpatch warning while removing flags, sizeof() is used.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

While unregistering a device, remove the context elements from the list to
not have any stale entries. With that any errors/bugs can be checked when
device is freed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

While traversing client_data_list in following conditions, linked list is
only read, no elements of the list are removed.  Therefore, use
list_for_each_entry(), instead of list_for_each_safe().
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

While unregistering a client, only context removal should be protected
with lock. There is no need to protect a freeing of such context which is
already removed from the list.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Currently rdma_addr_cancel() is an async operation, which notifies that
cancel is done by executing the callback function given during
rdma_resolve_ip(). If resolve_ip request is already completed than
callback is not executed.

Instead, now rdma_resolve_addr() and rdma_addr_cancel() simplified in
following ways.
1. rdma_addr_cancel() now a synchronous method. If request was
pending, after it is cancelled, no callback is notified.
2. rdma_resolve_addr() and respective addr_handler() callback doesn't
need to hold reference to cm_id.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

While registering a mad agent, a user space can trigger various errors
and flood the logs.

Therefore, decrease verbosity and rate limit such error messages.
While we are at it, use __func__ to print function name.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

It is illegal to change MTU to a value lower than the minimum MTU
stated in ethernet spec. In addition to that we need to add 4 bytes
for encapsulation header (IPOIB_ENCAP_LEN).

Before "ifconfig ib0 mtu 0" command, succeeds while it obviously shouldn't.
Signed-off-by: Muhammad Sammar <muhammads@mellanox.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

mdev->state device state is not protected by the QP for which WRs are
being processed. Therefore, there is no need to hold spin lock while
checking mdev state.

Given that device fatal error is unlikely situation, wrap the condition
check with unlikely().

Additionally, kernel QP1 is also a kernel ULP for which soft CQEs needs
to be generated. Therefore, check for device fatal error before
processing QP1 work requests.

Fixes: 89ea94a7 ("IB/mlx5: Reset flow support for IB kernel ULPs")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

When requested QP type is not supported for a {device, port}, return the
error right away before validating all parameters during mad agent
registration time.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

For dependencies, branch based on rdma.git 'for-rc' of
https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git/

Pull 'uverbs_dev_cleanups' from Leon Romanovsky:

====================
Reuse the char device code interfaces to simplify ib_uverbs_device
creation and destruction. As part of this series, we are sending fix to
cleanup path, which was discovered during internal review,

The fix definitely can go to -rc, but it means that this series will be
dependent on rdma-rc.
====================

* branch 'uverbs_dev_cleanups':
  RDMA/uverbs: Use device.groups to initialize device attributes
  RDMA/uverbs: Use cdev_device_add() instead of cdev_add()
  RDMA/core: Depend on device_add() to add device attributes
  RDMA/uverbs: Fix error cleanup path of ib_uverbs_add_one()

Resolved conflict in ib_device_unregister_sysfs()
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Instead of explicitly adding device attribute files and handling such
error conditions, depend on device core layer to create device attributes
files based group pointer NULL terminated array.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Instead of doing two step process to add char device and create underlying
device, use cdev_device_add() which does both.

Currently a kobject per uverbs_device is created to keep reference to its
holding ib_uverbs_device in addition to its underlying device 'dev'.

Instead just use uverbs_device->dev to keep a reference to.

With this change there is single reference tracker for ib_uverbs_device
structure.

This allows for subsequent patch to registers group attribute as well
using single API cdev_device_add().
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Instead of adding/removing device attribute files, depend on device_add()
which considers adding these device files based on NULL terminated
attributes group array.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

If ib_uverbs_create_uapi() fails, dev_num should be freed from the bitmap.

Fixes: 7d96c9b1 ("IB/uverbs: Have the core code create the uverbs_root_spec")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

1. DMA-able memory allocated for Shadow QP was not being freed.
2. bnxt_qplib_alloc_qp_hdr_buf() had a bug wherein the SQ pointer was
   erroneously pointing to the RQ. But since the corresponding
   free_qp_hdr_buf() was correct, memory being free was less than what was
   allocated.

Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Reuse existing get_device() API to do it symmetric to already used
put_device() in commit 924b8900 ("RDMA/core: Replace open-coded
variant of put_device")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The "closing" variable is used as boolean and set to "true" in one
place, update the declaration of that variable and their other
assignment to proper type.

Fixes: e951747a ("IB/uverbs: Rework the locking for cleaning up the ucontext")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The pci-core and net-core logic ensure that parameters provided
to nes_probe() and nes_netdev_open() are valid, hence the assert
print are not possible.

Cc: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/infiniband/hw/qedr/verbs.c: In function 'qedr_create_srq':
drivers/infiniband/hw/qedr/verbs.c:1450:24: warning:
 variable 'ctx' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Rahul Verma <rahul.verma@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

WARN_ON() already contains an unlikely(), so it's not necessary to wrap it
into another.
Signed-off-by: Igor Stoppa <igor.stoppa@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The upstream kernel commit cited below modified the workqueue in the
new CQ API to be bound to a specific CPU (instead of being unbound).
This caused ALL users of the new CQ API to use the same bound WQ.

Specifically, MAD handling was severely delayed when the CPU bound
to the WQ was busy handling (higher priority) interrupts.

This caused a delay in the MAD "heartbeat" response handling,
which resulted in ports being incorrectly classified as "down".

To fix this, add a new "unbound" WQ type to the new CQ API, so that users
have the option to choose either a bound WQ or an unbound WQ.

For MADs, choose the new "unbound" WQ.

Fixes: b7363e67 ("IB/device: Convert ib-comp-wq to be CPU-bound")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.m>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Consistently use the "QPLIB: " prefix for dev_<level> logging.

Miscellanea:

o Add missing newlines to avoid possible message interleaving
o Coalesce consecutive dev_<level> uses that emit a message header to
  avoid < 80 column lengths and mistakenly output on multiple lines
o Reflow modified lines to use 80 columns where appropriate
o Consistently use "%s: " where __func__ is output
o QPLIB: is now always output immediately after the dev_<level> header
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Inside of start_xmit() the call to check if the connection is up and the
queueing of the packets for later transmission is not atomic which leaves
a window where cm_rep_handler can run, set the connection up, dequeue
pending packets and leave the subsequently queued packets by start_xmit()
sitting on neigh->queue until they're dropped when the connection is torn
down. This only applies to connected mode. These dropped packets can
really upset TCP, for example, and cause multi-minute delays in
transmission for open connections.

Here's the code in start_xmit where we check to see if the connection is
up:

       if (ipoib_cm_get(neigh)) {
               if (ipoib_cm_up(neigh)) {
                       ipoib_cm_send(dev, skb, ipoib_cm_get(neigh));
                       goto unref;
               }
       }

The race occurs if cm_rep_handler execution occurs after the above
connection check (specifically if it gets to the point where it acquires
priv->lock to dequeue pending skb's) but before the below code snippet in
start_xmit where packets are queued.

       if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) {
               push_pseudo_header(skb, phdr->hwaddr);
               spin_lock_irqsave(&priv->lock, flags);
               __skb_queue_tail(&neigh->queue, skb);
               spin_unlock_irqrestore(&priv->lock, flags);
       } else {
               ++dev->stats.tx_dropped;
               dev_kfree_skb_any(skb);
       }

The patch acquires the netif tx lock in cm_rep_handler for the section
where it sets the connection up and dequeues and retransmits deferred
skb's.

Fixes: 839fcaba ("IPoIB: Connected mode experimental support")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Knister <aaron.s.knister@nasa.gov>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

For dependencies, branch based on 'mellanox/mlx5-next' of
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git

Pull Flow actions to mutate packets from Leon Romanovsky:

====================
This series exposes the ability to create flow actions which can
mutate packet headers. We do that by exposing two new verbs:
 * modify header - can change existing packet headers. packet
 * reformat - can encapsulate or decapsulate a packet.
              Once created a flow action must be attached to a steering
              rule for it to take effect.

The first 10 patches refactor mlx5_core code, rename internal structures
to better reflect their operation and export needed functions so the RDMA
side can allocate the action.

The last 5 patches expose via the IOCTL infrastructure mlx5_ib methods
which do the actual allocation of resources and return an handle to the
user. A user of this API is expected to know how to work with the device's
spec as the input to those function is HW depended.

An example usage of the modify header action is routing, A user can create
an action which edits the L2 header and decrease the TTL.

An example usage of the packet reformat action is VXLAN encap/decap which
is done by the HW.
====================

* branch 'mlx5-flow-mutate':
  RDMA/mlx5: Extend packet reformat verbs
  RDMA/mlx5: Add new flow action verb - packet reformat
  RDMA/uverbs: Add generic function to fill in flow action object
  RDMA/mlx5: Add a new flow action verb - modify header
  RDMA/uverbs: Add UVERBS_ATTR_CONST_IN to the specs language
  net/mlx5: Export packet reformat alloc/dealloc functions
  net/mlx5: Pass a namespace for packet reformat ID allocation
  net/mlx5: Expose new packet reformat capabilities
  {net, RDMA}/mlx5: Rename encap to reformat packet
  net/mlx5: Move header encap type to IFC header file
  net/mlx5: Break encap/decap into two separated flow table creation flags
  net/mlx5: Add support for more namespaces when allocating modify header
  net/mlx5: Export modify header alloc/dealloc functions
  net/mlx5: Add proper NIC TX steering flow tables support
  net/mlx5: Cleanup flow namespace getter switch logic
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

We expose new actions:

L2_TO_L2_TUNNEL - A generic encap from L2 to L2, the data passed should
		  be the encapsulating headers.

L3_TUNNEL_TO_L2 - Will do decap where the inner packet starts from L3,
		  the data should be mac or mac + vlan (14 or 18 bytes).

L2_TO_L3_TUNNEL - Will do encap where is L2 of the original packet will
		  not be included, the data should be the encapsulating
		  header.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

For now, only add L2_TUNNEL_TO_L2 option. This will allow to perform
generic decap operation if the encapsulating protocol is L2 based, and the
inner packet is also L2 based. For example this can be used to decap VXLAN
packets.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Refactor the initialization of a flow action object to a common function.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Expose the ability to create a flow action which changes packet
headers. The data passed from userspace should be modify header actions as
defined by HW specification.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This makes it clear and safe to access constants passed in from user
space. We define a consistent ABI of u64 for all constants, and verify
that the data passed in can be represented by the type the user supplies.

The expectation is this will always be used with an enum declaring the
constant values, and the user will use the enum type as input to the
accessor.

To retrieve the attribute value we introduce two helper calls - one
standard which may fail if attribute is not valid and one where caller can
provide a default value which will be used in case the attribute is not
valid (useful when attribute is optional).
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

This will allow for the RDMA side to allocate packet reformat context.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Currently we attach packet reformat actions only to the FDB namespace.
In preparation to be able to use that for NIC steering, pass the actual
namespace as a parameter.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Expose new abilities when creating a packet reformat context.

The new types which can be created are:
MLX5_REFORMAT_TYPE_L2_TO_L2_TUNNEL: Ability to create generic encap
operation to be done by the HW.

MLX5_REFORMAT_TYPE_L3_TUNNEL_TO_L2: Ability to create generic decap
operation where the inner packet doesn't contain L2.

MLX5_REFORMAT_TYPE_L2_TO_L3_TUNNEL: Ability to create generic encap
operation to be done by the HW. The L2 of the original packet
is dropped.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Renames all encap mlx5_{core,ib} code to use the new naming of packet
reformat. This change doesn't introduce any function change and is
needed to properly reflect the operation being done by this action.
For example not only can we encapsulate a packet, but also decapsulate it.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Those bits are hardware specification and should be defined in the
IFC header file.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Today we are able to attach encap and decap actions only to the FDB. In
preparation to enable those actions on the NIC flow tables, break the
single flag into two. Those flags control whatever a decap or encap
operations can be attached to the flow table created. For FDB, if
encapsulation is required, we set both of them.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

There are RX and TX flow steering namespaces with different number of
actions. Initialize them accordingly.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Those functions will be used by the RDMA side to create modify header
actions to be attached to flow steering rules via verbs.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>