- 02 Feb, 2017 6 commits
-
-
Florian Westphal authored
Add a helper to assign a nf_conn entry and the ctinfo bits to an sk_buff. This avoids changing code in followup patch that merges skb->nfct and skb->nfctinfo into skb->_nfct. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
Followup patch renames skb->nfct and changes its type so add a helper to avoid intrusive rename change later. Signed-off-by:
-
Florian Westphal authored
Next patch makes direct skb->nfct access illegal, reduce noise in next patch by using accessors we already have. Signed-off-by:
-
Florian Westphal authored
We should also toss nf_bridge_info, if any -- packet is leaving via ip_local_out, also, this skb isn't bridged -- it is a locally generated copy. Also this avoids the need to touch this later when skb->nfct is replaced with 'unsigned long _nfct' in followup patch. Signed-off-by:
-
Florian Westphal authored
It is never accessed for reading and the only places that write to it are the icmp(6) handlers, which also set skb->nfct (and skb->nfctinfo). The conntrack core specifically checks for attached skb->nfct after ->error() invocation and returns early in this case. Signed-off-by:
-
Feng authored
If something fails in nf_tables_table_enable(), it unregisters the chains. But the rollback code is the same as nf_tables_table_disable() almostly, except there is one counter check. Now create one wrapper function to eliminate the duplicated codes. Signed-off-by:
Feng <fgao@ikuai8.com> Signed-off-by:
-
- 18 Jan, 2017 3 commits
-
-
Gao Feng authored
The return value of nf_tables_table_lookup() is valid pointer or one pointer error. There are two cases: 1) IS_ERR(table) is true, it would return the error or reset the table as NULL, it is unnecessary to perform the latter check "table != NULL". 2) IS_ERR(obj) is false, the table is one valid pointer. It is also unnecessary to perform that check. The nf_tables_newset() and nf_tables_newobj() have same logic codes. In summary, we could move the block of condition check "table != NULL" in the else block to eliminate the original condition checks. Signed-off-by:
-
Liping Zhang authored
After adding the following nft rule, then ping 224.0.0.1: # nft add rule netdev t c pkttype host counter The warning complain message will be printed out again and again: WARNING: CPU: 0 PID: 10182 at net/netfilter/nft_meta.c:163 \ nft_meta_get_eval+0x3fe/0x460 [nft_meta] [...] Call Trace: <IRQ> dump_stack+0x85/0xc2 __warn+0xcb/0xf0 warn_slowpath_null+0x1d/0x20 nft_meta_get_eval+0x3fe/0x460 [nft_meta] nft_do_chain+0xff/0x5e0 [nf_tables] So we should deal with PACKET_LOOPBACK in netdev family too. For ipv4, convert it to PACKET_BROADCAST/MULTICAST according to the destination address's type; For ipv6, convert it to PACKET_MULTICAST directly. Signed-off-by:Liping Zhang <zlpnobody@gmail.com> Signed-off-by:
-
Liping Zhang authored
Since there's no broadcast address in IPV6, so in ipv6 family, the PACKET_LOOPBACK must be multicast packets, there's no need to check it again. Signed-off-by:
-
- 09 Jan, 2017 7 commits
-
-
Willem de Bruijn authored
In matches and targets that define a kernel-only tail to their xt_match and xt_target data structs, add a field .usersize that specifies up to where data is to be shared with userspace. Performed a search for comment "Used internally by the kernel" to find relevant matches and targets. Manually inspected the structs to derive a valid offsetof. Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Willem de Bruijn authored
Convert compat to copying entries, matches and targets one by one, using the xt_match_to_user and xt_target_to_user helper functions. Signed-off-by:
-
Willem de Bruijn authored
Convert ebtables to copying entries, matches and targets one by one. The solution is analogous to that of generic xt_(match|target)_to_user helpers, but is applied to different structs. Convert existing helpers ebt_make_XXXname helpers that overwrite fields of an already copy_to_user'd struct with ebt_XXX_to_user helpers that copy all relevant fields of the struct from scratch. Signed-off-by:
-
Willem de Bruijn authored
Convert arptables to copying entries, matches and targets one by one, using the xt_match_to_user and xt_target_to_user helper functions. Signed-off-by:
-
Willem de Bruijn authored
Convert ip6tables to copying entries, matches and targets one by one, using the xt_match_to_user and xt_target_to_user helper functions. Signed-off-by:
-
Willem de Bruijn authored
Convert iptables to copying entries, matches and targets one by one, using the xt_match_to_user and xt_target_to_user helper functions. Signed-off-by:
-
Willem de Bruijn authored
xt_entry_target, xt_entry_match and their private data may contain kernel data. Introduce helper functions xt_match_to_user, xt_target_to_user and xt_data_to_user that copy only the expected fields. These replace existing logic that calls copy_to_user on entire structs, then overwrites select fields. Private data is defined in xt_match and xt_target. All matches and targets that maintain kernel data store this at the tail of their private structure. Extend xt_match and xt_target with .usersize to limit how many bytes of data are copied. The remainder is cleared. If compatsize is specified, usersize can only safely be used if all fields up to usersize use platform-independent types. Otherwise, the compat_to_user callback must be defined. This patch does not yet enable the support logic. Signed-off-by:
-
- 05 Jan, 2017 3 commits
-
-
Geliang Tang authored
To make the code clearer, use rb_entry() instead of container_of() to deal with rbtree. Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
-
Davide Caratti authored
implement sctp_error to let nf_conntrack_in validate crc32c on the packet transport header. Assign skb->ip_summed to CHECKSUM_UNNECESSARY and return NF_ACCEPT in case of successful validation; otherwise, return -NF_ACCEPT to let netfilter skip connection tracking, like other protocols do. Besides preventing corrupted packets from matching conntrack entries, this fixes functionality of REJECT target: it was not generating any ICMP upon reception of SCTP packets, because it was computing RFC 1624 checksum on the packet and systematically mismatching crc32c in the SCTP header. Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Davide Caratti authored
nf_conntrack needs to compute crc32c when dealing with SCTP packets. Moreover, NF_NAT_PROTO_SCTP (currently selecting LIBCRC32C) can be enabled only if conntrack support for SCTP is enabled. Therefore, move enabling of kernel support for crc32c so that it is selected when NF_CT_PROTO_SCTP=y. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
- 03 Jan, 2017 4 commits
-
-
Liping Zhang authored
Similar to xt_connbytes, user can match how many average bytes per packet a connection has transferred so far. Signed-off-by:
-
Liping Zhang authored
We missed to add descriptions about NFT_CT_LABELS, NFT_CT_PKTS and NFT_CT_BYTES, now add it. Signed-off-by:
-
Florian Westphal authored
udplite nat was copied from udp nat, they are virtually 100% identical. Not really surprising given udplite is just udp with partial csum coverage. old: text data bss dec hex filename 11606 1457 210 13273 33d9 nf_nat.ko 330 0 2 332 14c nf_nat_proto_udp.o 276 0 2 278 116 nf_nat_proto_udplite.o new: text data bss dec hex filename 11598 1457 210 13265 33d1 nf_nat.ko 640 0 4 644 284 nf_nat_proto_udp.o Signed-off-by: -
Florian Westphal authored
udplite was copied from udp, they are virtually 100% identical. This adds udplite tracker to udp instead, removes udplite module, and then makes the udplite tracker builtin. udplite will then simply re-use udp timeout settings. It makes little sense to add separate sysctls, nowadays we have fine-grained timeout policy support via the CT target. old: text data bss dec hex filename 1633 672 0 2305 901 nf_conntrack_proto_udp.o 1756 672 0 2428 97c nf_conntrack_proto_udplite.o 69526 17937 268 87731 156b3 nf_conntrack.ko new: text data bss dec hex filename 2442 1184 0 3626 e2a nf_conntrack_proto_udp.o 68565 17721 268 86554 1521a nf_conntrack.ko Signed-off-by:
-
- 02 Jan, 2017 17 commits
-
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. The previous implementation of set_settings was modifying the value of speed and duplex, but with the new API, it's not possible. The structure ethtool_link_ksettings is defined as const. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: -
Philippe Reynes authored
There is a function in mdio for the old ethtool api gset. We add a new function mdio45_ethtool_ksettings_get for the new ethtool api glinksettings. Signed-off-by:
-
David S. Miller authored
Saeed Mahameed says: ==================== Mellanox mlx5 core and ODP updates 2017-01-01 The following eleven patches mainly come from Artemy Kovalyov who expanded mlx5 on-demand-paging (ODP) support. In addition there are three cleanup patches which don't change any functionality, but are needed to align codebase prior accepting other patches. Memory region (MR) in IB can be huge and ODP (on-demand paging) technique allows to use unpinned memory, which can be consumed and released on demand. This allows to applications do not pin down the underlying physical pages of the address space, and save from them need to track the validity of the mappings. Rather, the HCA requests the latest translations from the OS when pages are not present, and the OS invalidates translations which are no longer valid due to either non-present pages or mapping changes. In existing ODP implementation applications is needed to register memory buffers for communication, though registered memory regions need not have valid mappings at registration time. This patch set performs the following steps to expand current ODP implementation: 1. It refactors UMR to support large regions, by introducing generic function to perform HCA translation table modifications. This function supports both atomic and process contexts and is not limited by number of modified entries. This function allows to enable reallocated memory regions of arbitrary size, so adding MR cache buckets to support up to 16GB MRs. 2. It changes page fault event format and refactor page faults logic together with addition of atomic support. 3. It prepares mlx5 core code to support implicit registration with simplified and relaxed semantics. Implicit ODP semantics allows to applications provide special memory key that represents their complete address space. Thus all IO accesses referencing to this key (with proper access rights associated with the key) wouldn't need not register any virtual address range. Thanks, Artemy, Ilya and Leon v1->v2: - Don't use 'inline' in .c files ==================== Signed-off-by: -
Artemy Kovalyov authored
Add "type" field to mlx5_core MKEY struct. Check whether page fault happens on MKEY corresponding to MR. Signed-off-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Artemy Kovalyov authored
Handle ODP atomic operations. When initiator of RDMA atomic operation use ODP MR to provide source data handle pagefault properly. Signed-off-by:
-
Artemy Kovalyov authored
* Update page fault event according to last specification. * Separate code path for page fault EQ, completion EQ and async EQ. * Move page fault handling work queue from mlx5_ib static variable into mlx5_core page fault EQ. * Allocate memory to store ODP event dynamically as the events arrive, since in atomic context - use mempool. * Make mlx5_ib page fault handler run in process context. Signed-off-by:
-
Artemy Kovalyov authored
Update PAGE_FAULT_RESUME command layout. Three bit fields describing page fault: rdma, rdma_write, req_res gave 8 possible combinations, while only a few were legal. Now they are interpreted as three-bit type field, where former legal combinations turns into corresponding types and unused were added as new types. Signed-off-by:
-
Artemy Kovalyov authored
In this change we turn mlx5_ib_update_mtt() into generic mlx5_ib_update_xlt() to perfrom HCA translation table modifiactions supporting both atomic and process contexts and not limited by number of modified entries. Using this function we increase preallocated MRs up to 16GB. Signed-off-by:
-
Artemy Kovalyov authored
Make use of extended UMR translation offset. Signed-off-by:
-
