Add a fix for the memory leak bugs that can occur when the
saa7164_encoder_register() function fails.
The function allocates memory without explicitly freeing
it when errors occur.
Add a better error handling that deallocate the unused buffers before the
function exits during a fail.
Signed-off-by: Daniel Niv <danielniv3@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

In Kconfig it should be 'to'
In c8sectpfe-core.c it should be 'do'
Signed-off-by: Xiaofeng Cao <cxfcosmos@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The plane size needs to be PAGE_ALIGNED, so it is not possible to have
sizes bigger than MAX_INT - PAGE_SIZE.

We already check for overflows when that happen:
 if (size < vb->planes[plane].length)
	goto free;

But it is good to explicitly state our max allowed value, in order to
align with the driver expectations.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The driver is located in drivers/media/platform/imx-jpeg,
and it applies to the JPEG decoder from i.MX QXP and QM.
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

V4L2 driver for the JPEG encoder/decoder from i.MX8QXP/i.MX8QM application
processors.
The multi-planar buffers API is used.

Baseline and extended sequential jpeg decoding is supported.
Progressive jpeg decoding is not supported by the IP.
Supports encode and decode of various formats:
     YUV444, YUV422, YUV420, RGB, ARGB, Gray
YUV420 is the only multi-planar format supported.
Minimum resolution is 64 x 64, maximum 8192 x 8192.
The alignment requirements for the resolution depend on the format,
multiple of 16 resolutions should work for all formats.

v4l2-compliance tests are passing, including the
streaming tests, "v4l2-compliance -s"

[hverkuil: fix kernel-doc typos]
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

These are optional in struct v4l2_jpeg_header, so skip DHT/DQT segment
parsing if huffman_tables/quantization_tables were not requested by user,
to save time.
However, do count them (num_dht/num_dqt).
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

In the case we get an invalid stream, such as from v4l2-compliance
streaming test, jpeg_next_marker will end up parsing the entire
stream. The standard describes the high level syntax of a jpeg
as starting with SOI, ending with EOI, so return error if the very
first 2 bytes are not SOI.
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

According to Rec. ITU-T T.872 (06/2012) 6.5.3
APP14 segment is for color encoding, it contains a transform flag, which
may have values of 0, 1 and 2 and are interpreted as follows:
0 - CMYK for images that are encoded with four components
  - RGB for images that are encoded with three components
1 - An image encoded with three components using YCbCr colour encoding.
2 - An image encoded with four components using YCCK colour encoding.

This is used in imx-jpeg decoder, to distinguish between
YUV444 and RGB24.
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add bindings documentation for i.MX8QXP/QM JPEG decoder & encoder driver.
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The added format is V4L2_PIX_FMT_YUV24, this is a packed
YUV 4:4:4 format, with 8 bits for each component, 24 bits
per sample.

This format is used by the i.MX 8QuadMax and i.MX 8DualXPlus/8QuadXPlus
JPEG encoder/decoder.
Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

If CONFIG_I2C=m and CONFIG_CEC_CORE=y then of_find_i2c_device_by_node()
is not reachable. So use IS_REACHABLE instead of IS_ENABLED.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: a62943c145c1 ("media: cec-notifier: also search for HDMI devices on I2C")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fix the following kernel-doc warnings:

drivers/media/tuners/it913x.h:28: warning: Function parameter or member 'fe' not described in 'it913x_platform_data'
drivers/media/tuners/tda827x.h:34: warning: wrong kernel-doc identifier on line:
 * Attach a tda827x tuner to the supplied frontend structure.
drivers/media/tuners/qt1010.h:20: warning: wrong kernel-doc identifier on line:
 * Attach a qt1010 tuner to the supplied frontend structure.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fix these kernel-doc warnings:

include/media/davinci/vpbe_osd.h:77: warning: Enum value 'PIXFMT_YCBCRI' not described in enum 'osd_pix_format'
include/media/davinci/vpbe_osd.h:77: warning: Enum value 'PIXFMT_YCRCBI' not described in enum 'osd_pix_format'
include/media/davinci/vpbe_osd.h:77: warning: Excess enum value 'PIXFMT_YCrCbI' description in 'osd_pix_format'
include/media/davinci/vpbe_osd.h:77: warning: Excess enum value 'PIXFMT_YCbCrI' description in 'osd_pix_format'
include/media/davinci/vpbe_osd.h:232: warning: expecting prototype for enum davinci_cursor_v_width. Prototype was for enum
osd_cursor_v_width instead
include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'ns' not described in 'uvc_meta_buf'
include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'sof' not described in 'uvc_meta_buf'
include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'length' not described in 'uvc_meta_buf'
include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'flags' not described in 'uvc_meta_buf'
include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'buf' not described in 'uvc_meta_buf'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This fixes these kernel-doc warnings:

include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI1A' not described in enum 'tvp514x_input'
include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI1B' not described in enum 'tvp514x_input'
include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI1C' not described in enum 'tvp514x_input'
include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI2A' not described in enum 'tvp514x_input'
include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI2B' not described in enum 'tvp514x_input'
include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI2C' not described in enum 'tvp514x_input'
include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI3A' not described in enum 'tvp514x_input'
include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI3B' not described in enum 'tvp514x_input'
include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI3C' not described in enum 'tvp514x_input'
include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI4A' not described in enum 'tvp514x_input'
include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI2A_VI1A' not described in enum 'tvp514x_input'

include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI2B_VI1B' not described in enum 'tvp514x_input'

include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI2C_VI1C' not described in enum 'tvp514x_input'

include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI2A_VI3A' not described in enum 'tvp514x_input'

include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI2B_VI3B' not described in enum 'tvp514x_input'

include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI2C_VI3C' not described in enum 'tvp514x_input'

include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI4A_VI1A' not described in enum 'tvp514x_input'

include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI4A_VI1B' not described in enum 'tvp514x_input'

include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI4A_VI1C' not described in enum 'tvp514x_input'

include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI4A_VI3A' not described in enum 'tvp514x_input'

include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI4A_VI3B' not described in enum 'tvp514x_input'

include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI4A_VI3C' not described in enum 'tvp514x_input'

include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_INVALID' not described in enum 'tvp514x_input'
include/media/i2c/tvp514x.h:82: warning: Enum value 'OUTPUT_10BIT_422_EMBEDDED_SYNC' not described in enum 'tvp514x_output'
include/media/i2c/tvp514x.h:82: warning: Enum value 'OUTPUT_20BIT_422_SEPERATE_SYNC' not described in enum 'tvp514x_output'
include/media/i2c/tvp514x.h:82: warning: Enum value 'OUTPUT_10BIT_422_SEPERATE_SYNC' not described in enum 'tvp514x_output'
include/media/i2c/tvp514x.h:82: warning: Enum value 'OUTPUT_INVALID' not described in enum 'tvp514x_output'
include/media/i2c/adv7343.h:38: warning: cannot understand function prototype: 'struct adv7343_power_mode '
include/media/i2c/s5k4ecgx.h:31: warning: expecting prototype for struct ss5k4ecgx_platform_data. Prototype was for struct
s5k4ecgx_platform_data instead
include/media/i2c/mt9t112.h:21: warning: cannot understand function prototype: 'struct mt9t112_platform_data '
include/media/i2c/noon010pc30.h:13: warning: Cannot understand  * @clk_rate: the clock frequency in Hz
include/media/i2c/s5k6aa.h:45: warning: Function parameter or member 'bus_type' not described in 's5k6aa_platform_data'
include/media/i2c/tw9910.h:19: warning: cannot understand function prototype: 'enum tw9910_mpout_pin '
include/media/i2c/tw9910.h:36: warning: cannot understand function prototype: 'struct tw9910_video_info '
include/media/i2c/ov772x.h:53: warning: cannot understand function prototype: 'struct ov772x_camera_info '
include/media/i2c/s5c73m3.h:53: warning: Function parameter or member 'bus_type' not described in 's5c73m3_platform_data'
drivers/media/i2c/ccs/ccs-quirk.h:50: warning: Function parameter or member 'post_streamoff' not described in 'ccs_quirk'
drivers/media/i2c/ccs/ccs-quirk.h:50: warning: Function parameter or member 'flags' not described in 'ccs_quirk'
drivers/media/i2c/ccs/ccs-data.h:144: warning: expecting prototype for struct ccs_pdaf_pix_loc_block_desc. Prototype was for struct
ccs_pdaf_pix_loc_pixel_desc instead
drivers/media/i2c/tvp514x_regs.h:272: warning: Function parameter or member 'token' not described in 'tvp514x_reg'
drivers/media/i2c/tvp514x_regs.h:272: warning: Function parameter or member 'reg' not described in 'tvp514x_reg'
drivers/media/i2c/tvp514x_regs.h:272: warning: Function parameter or member 'val' not described in 'tvp514x_reg'
drivers/media/i2c/m5mols/m5mols.h:69: warning: Function parameter or member 'brightness' not described in 'm5mols_exif'
drivers/media/i2c/m5mols/m5mols.h:147: error: Cannot parse struct or union!
drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN0' not described in enum 'adv748x_ports'
drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN1' not described in enum 'adv748x_ports'
drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN2' not described in enum 'adv748x_ports'
drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN3' not described in enum 'adv748x_ports'
drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN4' not described in enum 'adv748x_ports'
drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN5' not described in enum 'adv748x_ports'
drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN6' not described in enum 'adv748x_ports'
drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN7' not described in enum 'adv748x_ports'
drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_HDMI' not described in enum 'adv748x_ports'
drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_TTL' not described in enum 'adv748x_ports'
drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_TXA' not described in enum 'adv748x_ports'
drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_TXB' not described in enum 'adv748x_ports'
drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_MAX' not described in enum 'adv748x_ports'
drivers/media/i2c/adv748x/adv748x.h:199: warning: Function parameter or member 'i2c_clients' not described in 'adv748x_state'
drivers/media/i2c/adv748x/adv748x.h:199: warning: Function parameter or member 'regmap' not described in 'adv748x_state'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This fixes these kerneldoc warnings:

drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'v4l2_dev' not described in 'tw686x_dev'
drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'snd_card' not described in 'tw686x_dev'
drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'name' not described in 'tw686x_dev'
drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'type' not described in 'tw686x_dev'
drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'dma_mode' not described in 'tw686x_dev'
drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'pci_dev' not described in 'tw686x_dev'
drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'mmio' not described in 'tw686x_dev'
drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'dma_ops' not described in 'tw686x_dev'
drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'video_channels' not described in 'tw686x_dev'
drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'audio_channels' not described in 'tw686x_dev'
drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'audio_rate' not described in 'tw686x_dev'
drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'period_size' not described in 'tw686x_dev'
drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'audio_enabled' not described in 'tw686x_dev'
drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'dma_delay_timer' not described in 'tw686x_dev'
drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'pending_dma_en' not described in 'tw686x_dev'
drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'pending_dma_cmd' not described in 'tw686x_dev'
drivers/media/pci/sta2x11/sta2x11_vip.h:25: warning: Function parameter or member 'i2c_id' not described in 'vip_config'
drivers/media/pci/sta2x11/sta2x11_vip.h:25: warning: Function parameter or member 'i2c_addr' not described in 'vip_config'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This patch fixes the following kernel-doc warnings:

include/uapi/linux/videodev2.h:996: warning: Function parameter or member 'm' not described in 'v4l2_plane'
include/uapi/linux/videodev2.h:996: warning: Function parameter or member 'reserved' not described in 'v4l2_plane'
include/uapi/linux/videodev2.h:1057: warning: Function parameter or member 'm' not described in 'v4l2_buffer'
include/uapi/linux/videodev2.h:1057: warning: Function parameter or member 'reserved2' not described in 'v4l2_buffer'
include/uapi/linux/videodev2.h:1057: warning: Function parameter or member 'reserved' not described in 'v4l2_buffer'
include/uapi/linux/videodev2.h:1068: warning: Function parameter or member 'tv' not described in 'v4l2_timeval_to_ns'
include/uapi/linux/videodev2.h:1068: warning: Excess function parameter 'ts' description in 'v4l2_timeval_to_ns'
include/uapi/linux/videodev2.h:1138: warning: Function parameter or member 'reserved' not described in 'v4l2_exportbuffer'
include/uapi/linux/videodev2.h:2237: warning: Function parameter or member 'reserved' not described in 'v4l2_plane_pix_format'
include/uapi/linux/videodev2.h:2270: warning: Function parameter or member 'hsv_enc' not described in 'v4l2_pix_format_mplane'
include/uapi/linux/videodev2.h:2270: warning: Function parameter or member 'reserved' not described in 'v4l2_pix_format_mplane'
include/uapi/linux/videodev2.h:2281: warning: Function parameter or member 'reserved' not described in 'v4l2_sdr_format'
include/uapi/linux/videodev2.h:2315: warning: Function parameter or member 'fmt' not described in 'v4l2_format'

include/uapi/linux/v4l2-subdev.h:53: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_format'
include/uapi/linux/v4l2-subdev.h:66: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_crop'
include/uapi/linux/v4l2-subdev.h:89: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_mbus_code_enum'
include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'min_width' not described in 'v4l2_subdev_frame_size_enum'
include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'max_width' not described in 'v4l2_subdev_frame_size_enum'
include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'min_height' not described in 'v4l2_subdev_frame_size_enum'
include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'max_height' not described in 'v4l2_subdev_frame_size_enum'
include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_frame_size_enum'
include/uapi/linux/v4l2-subdev.h:119: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_frame_interval'
include/uapi/linux/v4l2-subdev.h:140: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_frame_interval_enum'

include/uapi/linux/cec.h:406: warning: Function parameter or member 'raw' not described in 'cec_connector_info'
include/uapi/linux/cec.h:470: warning: Function parameter or member 'flags' not described in 'cec_event'

include/media/v4l2-h264.h:82: warning: Function parameter or member 'reflist' not described in 'v4l2_h264_build_p_ref_list'
include/media/v4l2-h264.h:82: warning: expecting prototype for v4l2_h264_build_b_ref_lists(). Prototype was for v4l2_h264_build_p_ref_list()
instead

include/media/cec.h:50: warning: Function parameter or member 'lock' not described in 'cec_devnode'

include/media/v4l2-jpeg.h:122: warning: Function parameter or member 'num_dht' not described in 'v4l2_jpeg_header'
include/media/v4l2-jpeg.h:122: warning: Function parameter or member 'num_dqt' not described in 'v4l2_jpeg_header'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The documentation for V4L2_CID_MPEG_VIDEO_BITRATE was missing the word
'Average': this is the average video bitrate.

The V4L2_CID_MPEG_VIDEO_BITRATE_PEAK documentation *does* refer to
V4L2_CID_MPEG_VIDEO_BITRATE as the average video bitrate.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

In case of error, the function i2c_new_dummy_device() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().

Fixes: e6089fec ("media: m88ds3103: Add support for ds3103b demod")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

When kzalloc() fails and state is NULL, no error return code is
assigned.
To fix this bug, __ret is assigned with -ENOMEM in this case.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

When sun6i_video_remote_subdev() returns NULL to subdev, no error return
code of sun6i_video_start_streaming() is assigned.
To fix this bug, ret is assigned with -EINVAL in this case.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Fixes: 5cc7522d ("media: sun6i: Add support for Allwinner CSI V3s")
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

No need for a return after a break;
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

'string.h' included in 'vidtv_psi.c' is duplicated.
Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Acked-by: Daniel Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

When the list of xdev->notifier.asd_list is empty, no error return code
of xvip_graph_init() is assigned.
To fix this bug, ret is assigned with -ENOENT as error return code.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The CAL driver is video node centric, it controls the whole device
through the video device nodes. This limits the possible use cases as it
can't support sources that are more complex than a single subdev. To
support more complex hardware pipelines, implement support for the media
controller centric API. The exposed API can be selected through a module
parameter.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The cal_ctx_v4l2_init_formats() function does not handle error values
correctly when calling enum_mbus_code in subdevs, causing an infinite
loop if the subdev's enum_mbus_code returns some other error than EINVAL.

Fix the error handling.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

v4l2_fill_pix_format() already copies mbus_fmt.field, so no need to do
it again.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

In one of the error paths of the for_each_child_of_node() loop in
fimc_md_parse_one_endpoint, add missing call to of_node_put().

Fix the following coccicheck warning:
./drivers/media/platform/exynos4-is/media-dev.c:489:1-23: WARNING:
Function "for_each_child_of_node" should have of_node_put() before
return around line 492.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Before the video device node is registered, the v4l2_dev.mdev
pointer must be set in order to correctly associate the video
device with the media device. Move the initialization of the
media device up.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fix following warnings:

./scripts/kernel-doc --none include/uapi/linux/v4l2-controls.h

        include/uapi/linux/v4l2-controls.h:1727: warning: bad line:
        include/uapi/linux/v4l2-controls.h:1853: warning: expecting prototype for struct v4l2_vp8_frame. Prototype was for struct v4l2_ctrl_vp8_frame instead
        include/uapi/linux/v4l2-controls.h:1853: warning: Function parameter or member 'segment' not described in 'v4l2_ctrl_vp8_frame'
        include/uapi/linux/v4l2-controls.h:1853: warning: Function parameter or member 'entropy' not described in 'v4l2_ctrl_vp8_frame'
        include/uapi/linux/v4l2-controls.h:1853: warning: Function parameter or member 'coder_state' not described in 'v4l2_ctrl_vp8_frame'
Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Until now, the VP8 V4L2 API was not exported as a public API,
and only defined in a private media header (media/vp8-ctrls.h).

The reason for this was a concern about the API not complete
and ready to support VP8 decoding hardware accelerators.

After reviewing the VP8 specification in detail, and now
that the API is able to support Cedrus and Hantro G1,
we can consider this ready.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Before we move the VP8 controls to a stable public header,
rename this macro so it's clearly V4L2-specific.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Simply print the type of the control.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Move the VP8 stateless control types out of staging,
and re-number it to avoid any confusion.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Since we are ready to stabilize the VP8 stateless API,
move the parsed VP8 pixel format.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

In preparation for making the interface public,
document all the structures.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Rename to struct v4l2_vp8_loop_filter, which is closer to the
VP8 syntax. This change is only cosmetics, but since this API
is exposed to userspace, it's worth the trouble to get it consistent.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

It doesn't seem to add any clarity to have a "header" suffix in controls,
struct names and flags.

Since this just makes names too long without any benefit, just drop it.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

On production devices the firmware could be located on different
places, this path could be provided by special firmware-name DT
property.

Here we check for existence of such DT property and if it exist
take the firmware path from there. Otherwise, if the property
is missing we fallback to the predefined path from driver resource
structure.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This file uses memremap() now, so we should include io.h instead of
relying on any sort of implicit include elsewhere.

Cc: Dikshita Agarwal <dikshita@codeaurora.org>
Fixes: 0ca0ca98 ("media: venus: core: add support to dump FW region")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Fritz Koenig <frkoenig@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Commit aaaa93ed ("media] media: venus: venc: add video encoder files")
is the last in a series of three commits to add core.c vdec.c and venc.c
adding core, encoder and decoder.

The encoder and decoder check for core drvdata as set and return -EPROBE_DEFER
if it has not been set, however both the encoder and decoder rely on
core.v4l2_dev as valid.

core.v4l2_dev will not be valid until v4l2_device_register() has completed
in core.c's probe().

Normally this is never seen however, Dmitry reported the following
backtrace when compiling drivers and firmware directly into a kernel image.

[    5.259968] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
[    5.269850] sd 0:0:0:3: [sdd] Optimal transfer size 524288 bytes
[    5.275505] Workqueue: events deferred_probe_work_func
[    5.275513] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[    5.441211] usb 2-1: new SuperSpeedPlus Gen 2 USB device number 2 using xhci-hcd
[    5.442486] pc : refcount_warn_saturate+0x140/0x148
[    5.493756] hub 2-1:1.0: USB hub found
[    5.496266] lr : refcount_warn_saturate+0x140/0x148
[    5.500982] hub 2-1:1.0: 4 ports detected
[    5.503440] sp : ffff80001067b730
[    5.503442] x29: ffff80001067b730
[    5.592660] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    5.598478] x28: ffff6c6bc1c379b8
[    5.598480] x27: ffffa5c673852960 x26: ffffa5c673852000
[    5.598484] x25: ffff6c6bc1c37800 x24: 0000000000000001
[    5.810652] x23: 0000000000000000 x22: ffffa5c673bc7118
[    5.813777] hub 1-1:1.0: USB hub found
[    5.816108] x21: ffffa5c674440000 x20: 0000000000000001
[    5.820846] hub 1-1:1.0: 4 ports detected
[    5.825415] x19: ffffa5c6744f4000 x18: ffffffffffffffff
[    5.825418] x17: 0000000000000000 x16: 0000000000000000
[    5.825421] x15: 00000a4810c193ba x14: 0000000000000000
[    5.825424] x13: 00000000000002b8 x12: 000000000000f20a
[    5.825427] x11: 000000000000f20a x10: 0000000000000038
[    5.845447] usb 2-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[    5.845904]
[    5.845905] x9 : 0000000000000000 x8 : ffff6c6d36fae780
[    5.871208] x7 : ffff6c6d36faf240 x6 : 0000000000000000
[    5.876664] x5 : 0000000000000004 x4 : 0000000000000085
[    5.882121] x3 : 0000000000000119 x2 : ffffa5c6741ef478
[    5.887578] x1 : 3acbb3926faf5f00 x0 : 0000000000000000
[    5.893036] Call trace:
[    5.895551]  refcount_warn_saturate+0x140/0x148
[    5.900202]  __video_register_device+0x64c/0xd10
[    5.904944]  venc_probe+0xc4/0x148
[    5.908444]  platform_probe+0x68/0xe0
[    5.912210]  really_probe+0x118/0x3e0
[    5.915977]  driver_probe_device+0x5c/0xc0
[    5.920187]  __device_attach_driver+0x98/0xb8
[    5.924661]  bus_for_each_drv+0x68/0xd0
[    5.928604]  __device_attach+0xec/0x148
[    5.932547]  device_initial_probe+0x14/0x20
[    5.936845]  bus_probe_device+0x9c/0xa8
[    5.940788]  device_add+0x3e8/0x7c8
[    5.944376]  of_device_add+0x4c/0x60
[    5.948056]  of_platform_device_create_pdata+0xbc/0x140
[    5.953425]  of_platform_bus_create+0x17c/0x3c0
[    5.958078]  of_platform_populate+0x80/0x110
[    5.962463]  venus_probe+0x2ec/0x4d8
[    5.966143]  platform_probe+0x68/0xe0
[    5.969907]  really_probe+0x118/0x3e0
[    5.973674]  driver_probe_device+0x5c/0xc0
[    5.977882]  __device_attach_driver+0x98/0xb8
[    5.982356]  bus_for_each_drv+0x68/0xd0
[    5.986298]  __device_attach+0xec/0x148
[    5.990242]  device_initial_probe+0x14/0x20
[    5.994539]  bus_probe_device+0x9c/0xa8
[    5.998481]  deferred_probe_work_func+0x74/0xb0
[    6.003132]  process_one_work+0x1e8/0x360
[    6.007254]  worker_thread+0x208/0x478
[    6.011106]  kthread+0x150/0x158
[    6.014431]  ret_from_fork+0x10/0x30
[    6.018111] ---[ end trace f074246b1ecdb466 ]---

This patch fixes by

- Only setting drvdata after v4l2_device_register() completes
- Moving v4l2_device_register() so that suspend/reume in core::probe()
  stays as-is
- Changes pm_ops->core_function() to take struct venus_core not struct
  device
- Minimal rework of v4l2_device_*register in probe/remove
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>