- 02 Oct, 2009 34 commits
-
-
Anirban Chakraborty authored
Current code attempts to clean up resources when queue create fails and there it invokes queue free call with a (NULL) pointer to the queue which could not be allocated in the first place. Fix it by returning directly without invoking the queue free call as no resources has been allocated at that point of time. Reported-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
David Jeffery authored
A memory use after free bug can manifest if the MTSETBLK or SET_DENS_AND_BLK ioctl features are used to set the tape's blocksize from 0 to non-zero. After the driver sets the new block size, in this one case it calls normalize_buffer() to free the device's internal data buffers. However, the ioctl code assumes there is always a buffer and does not check or allocate a buffer if there isn't one. So any following ioctl calls can corrupt a part of memory by writing data to memory that the st driver had freed. This patch removes the normalize_buffer() call and the specialness of changing from a 0 to non-zero blocksize to fix the possible use of memory after it has been freed by the st driver. signed-off-by:
David Jeffery <djeffery@redhat.com> Acked-by:
Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by:
-
Jayamohan Kallickal authored
This patch contains changes to use pci_pools for iscsi hdr instead of pci_alloc_consistent. Here we alloc and free to pool for every IO v3: - Remove cleanup loop in beiscsi_session_destroy - Fixup for allocation failure handling in beiscsi_alloc_pdu - Removed unused variable in beiscsi_session_destroy. [jejb: fix up pci_pool_alloc address sizing problem] Signed-off-by:
Jayamohan Kallickal <jayamohank@serverengines.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Jayamohan Kallickal authored
This patch contains changes that allow iscsi_session_setup to allocate private space for LLD's Signed-off-by:
-
Jayamohan Kallickal authored
[v2: fixed up virt_to_bus() issue spotted by sfr] Signed-off-by:
-
Christof Schmitt authored
Running chchp --vary 0 and chccwdev -d on a FCP device with scsi devices attached can lead to this thread hanging: ================================================================ STACK TRACE FOR TASK: 0x2fbfcc00 (kslowcrw) STACK: 0 schedule+1136 [0x45f99c] 1 schedule_timeout+534 [0x46054e] 2 wait_for_common+374 [0x45f442] 3 blk_execute_rq+160 [0x217a2c] 4 scsi_execute+278 [0x26daf2] 5 scsi_execute_req+150 [0x26dc86] 6 sd_sync_cache+138 [0x28460a] 7 sd_shutdown+130 [0x28486a] 8 sd_remove+104 [0x284c84] 9 __device_release_driver+152 [0x257430] 10 device_release_driver+56 [0x2575c8] 11 bus_remove_device+214 [0x25672a] 12 device_del+352 [0x25456c] 13 __scsi_remove_device+108 [0x272630] 14 scsi_remove_device+66 [0x2726ba] 15 zfcp_ccw_remove+824 [0x335558] 16 ccw_device_remove+62 [0x2b3f2a] 17 __device_release_driver+152 [0x257430] 18 device_release_driver+56 [0x2575c8] 19 bus_remove_device+214 [0x25672a] 20 device_del+352 [0x25456c] 21 ccw_device_unregister+92 [0x2b48c4] 22 io_subchannel_remove+108 [0x2b4950] 23 css_remove+62 [0x2af7ee] 24 __device_release_driver+152 [0x257430] 25 device_release_driver+56 [0x2575c8] 26 bus_remove_device+214 [0x25672a] 27 device_del+352 [0x25456c] 28 device_unregister+38 [0x25464a] 29 css_sch_device_unregister+68 [0x2af97c] 30 ccw_device_call_sch_unregister+78 [0x2b581e] 31 worker_thread+604 [0x69eb0] 32 kthread+154 [0x6ff42] 33 kernel_thread_starter+6 [0x1c952] ================================================================ The problem is that the chchp --vary 0 leads to zfcp first calling fc_remote_port_delete which blocks all scsi devices on the remote port. Calling scsi_remove_device later lets the sd driver issue a SYNCHRONIZE_CACHE command. This command stays on the "stopped" request requeue because the SCSI device is blocked. Fix this by first removing the scsi and fc hosts which removes all scsi devices and do not use scsi_remove_device. Reviewed-by:
Felix Beck <felix.beck@de.ibm.com> Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
-
Christof Schmitt authored
======================================================= [ INFO: possible circular locking dependency detected ] 2.6.31-39.x.20090917-s390xdefault #1 ------------------------------------------------------- kslowcrw/83 is trying to acquire lock: (&adapter->scan_work){+.+.+.}, at: [<0000000000169c5c>] __cancel_work_timer+0x64/0x3d4 but task is already holding lock: (&zfcp_data.config_mutex){+.+.+.}, at: [<00000000004671ea>] zfcp_ccw_remove+0x66/0x384 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&zfcp_data.config_mutex){+.+.+.}: [<0000000000189962>] __lock_acquire+0xe26/0x1834 [<000000000018a4b6>] lock_acquire+0x146/0x178 [<000000000058cb5a>] mutex_lock_nested+0x82/0x3ec [<0000000000477170>] zfcp_fc_scan_ports+0x3ec/0x728 [<0000000000168e34>] worker_thread+0x278/0x3a8 [<000000000016ff08>] kthread+0x9c/0xa4 [<0000000000109ebe>] kernel_thread_starter+0x6/0xc [<0000000000109eb8>] kernel_thread_starter+0x0/0xc -> #0 (&adapter->scan_work){+.+.+.}: [<0000000000189e60>] __lock_acquire+0x1324/0x1834 [<000000000018a4b6>] lock_acquire+0x146/0x178 [<0000000000169c9a>] __cancel_work_timer+0xa2/0x3d4 [<0000000000465cb2>] zfcp_adapter_dequeue+0x32/0x14c [<00000000004673e4>] zfcp_ccw_remove+0x260/0x384 [<00000000004250f6>] ccw_device_remove+0x42/0x1ac [<00000000003cb6be>] __device_release_driver+0x9a/0x10c [<00000000003cb856>] device_release_driver+0x3a/0x4c [<00000000003ca94c>] bus_remove_device+0xcc/0x114 [<00000000003c8506>] device_del+0x162/0x21c [<0000000000425ff2>] ccw_device_unregister+0x5e/0x7c [<000000000042607e>] io_subchannel_remove+0x6e/0x9c [<000000000041ff9a>] css_remove+0x3e/0x7c [<00000000003cb6be>] __device_release_driver+0x9a/0x10c [<00000000003cb856>] device_release_driver+0x3a/0x4c [<00000000003ca94c>] bus_remove_device+0xcc/0x114 [<00000000003c8506>] device_del+0x162/0x21c [<00000000003c85e8>] device_unregister+0x28/0x38 [<0000000000420152>] css_sch_device_unregister+0x46/0x58 [<00000000004276a6>] io_subchannel_sch_event+0x28e/0x794 [<0000000000420442>] css_evaluate_known_subchannel+0x46/0xd0 [<0000000000420ebc>] slow_eval_known_fn+0x88/0xa0 [<00000000003caffa>] bus_for_each_dev+0x7e/0xd0 [<000000000042188c>] for_each_subchannel_staged+0x6c/0xd4 [<0000000000421a00>] css_slow_path_func+0x54/0xd8 [<0000000000168e34>] worker_thread+0x278/0x3a8 [<000000000016ff08>] kthread+0x9c/0xa4 [<0000000000109ebe>] kernel_thread_starter+0x6/0xc [<0000000000109eb8>] kernel_thread_starter+0x0/0xc cancel_work_sync is called while holding the config_mutex. But the work that is being cancelled or flushed also uses the config_mutex. Fix the resulting deadlock possibility by calling cancel_work_sync earlier without holding the mutex. The best place to do is is after offlining the device. No new port scan work will be scheduled for the offline device, so this is a safe place to call cancel_work_sync. Reviewed-by: -
Christof Schmitt authored
With the change that the zfcp_adapter struct is only allocated when the device is set online, the shutdown handler has to check for a non-existing zfcp_adapter struct. On the other hand, this check is not necessary in the offline callback, since an online device has the zfcp_adapter allocated and we go through the offline callback before removing the ccw device. Reviewed-by:
-
Christof Schmitt authored
With the change for delaying the allocation of zfcp_adapter, the initial device parameter function has to first call ccw_device_set_online which allocates the zfcp_adapter structure. Change this and adapt the cfdc part accordingly. Reviewed-by:
-
Christof Schmitt authored
The common initialization of ct/gs and els requests missed the initialization of unchained requests. Fix this by moving the common parts to a place that is called for all ct/gs and els requests. Reviewed-by:
-
Kashyap, Desai authored
Bump version to 02.100.03.00 Signed-off-by:
Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by:
-
Kashyap, Desai authored
Add support to process device removal events when the phy status is set to MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT. Signed-off-by:
-
Kashyap, Desai authored
Following a diag_reset, a request to send an ioc_init is timing out. The timeout occurred within the HANDSHAKE logic while waiting on firmware to acknowledge that the driver had wrote to the doorbell register. This was root caused to a logic timeout in the firmware code. The proposed solution is for the driver to call the udelay instead of msleep API in function where its looping reading the interrupt status. In addition to this change, there were two additional cases where we deleted the clearing interrupt status outside handshake context. Signed-off-by:
-
Kashyap, Desai authored
Now driver call init_completion on a per request basis. At some point the wait_for_completion_timeout is not waiting for the timeout, instead returning immediately, thus going into diag reset. This fix will address all request using the wait_for_completion_timeout API. The previous implimentation was only calling init_completion at driver load time. Signed-off-by:
-
Kashyap, Desai authored
(1) Added three new functions to handle sending target resest and OP_REMOVE from interrupt time, they are _scsih_tm_tr_send, _scsih_tm_tr_complete, and _scsih_sas_control_complete. This code will create a link list of pending target resets if there is no more available request in the hipriority request queue. The list is stored in ioc->delayed_tr_list. (2) All callback handler return type is changed from void to u8. Now _base_interrupt will check for return type of callback handlers to take decision of message frame is already freed or not. In genral, Return 1 meaning mf should be freed from _base_interrupt 0 means the mf is freed from function. Signed-off-by: -
Kashyap, Desai authored
1) create a pool of high priority message frames in the region of memory between message frames and chains. The modifications are in _base_allocate_memory_pools. Also create a seperate pool of memory for internal commands located near the same region of memory. The pool of high priority message frames is restriced by the facts->HighPriorityCredit. 2) Create additional API for accessing request message frames. New function mpt2sas_base_get_smid_hpr is for highpriority request. New function mpt2sas_base_get_smid_scsiio for SCSI_IO, passing in the scsi command pointer. The mpt2sas_base_get_smid function is for requesting internal commands. 3) Added new function _base_get_cb_idx to obtain the callback index from one of the three pools of request message frames. 4) Removed wrapper functions _scsih_scsi_lookup_set and _scsih_scsi_lookup_getclear. These were removed because this handling was moved into mpt2sas_base_get_smid_scsiio and mpt2sas_base_free_smid. 5) The function mpt2sas_base_free_smid is modified so the request message frames are put back on one of the three pools of request message frames. Signed-off-by:
-
Kashyap, Desai authored
Update the copyright year to 2009 through out the code. Signed-off-by:
-
Kashyap, Desai authored
Added new file for MPI2 header version history. Signed-off-by:
-
Kashyap, Desai authored
Drivers header are updated to the MPI2 REV K headers. Renamed VF_ID to msix_index in all call back handlers. VF_ID is removed from all request descriptor. Signed-off-by:
-
Jing Huang authored
Add new driver for Brocade Hardware Signed-off-by:
Jing Huang <huangj@brocade.com> Signed-off-by:
-
Randy Dunlap authored
Add missing kernel-doc notation in scsi_transport_fc.c: Warning(drivers/scsi/scsi_transport_fc.c:3593): No description found for parameter 'q' Warning(drivers/scsi/scsi_transport_fc.c:3700): No description found for parameter 'q' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Martin K. Petersen authored
Add support for 32-byte READ/WRITE as well as DIF Type 2 protection. Reject protected 10/12/16 byte READ/WRITE commands when Type 2 is enabled. Verify Type 2 reference tag according to Expected Initial LBA in 32-byte CDB. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Martin K. Petersen authored
Disks formatted with DIF Type 2 reject READ/WRITE 6/10/12/16 commands when protection is enabled. Only the 32-byte variants are supported. Implement support for issusing 32-byte READ/WRITE and enable Type 2 drives in the protection type detection logic. Signed-off-by:
-
Martin K. Petersen authored
We would leak a scsi_data_buffer if the free_list command was of the protected variety. Reported-by:
Boaz Harrosh <bharrosh@panasas.com> Signed-off-by:
-
Martin K. Petersen authored
So far we have only issued DIF commands if CONFIG_BLK_DEV_INTEGRITY is enabled. However, communication between initiator and target should be independent of protection information DMA. There are DIF-only host adapters coming out that will be able to take advantage of this. Move the relevant DIF bits to sd.c. Signed-off-by:
-
Martin K. Petersen authored
The checksum format is orthogonal to whether the protection information is being passed on beyond the HBA or not. It is perfectly valid to use a non-T10 CRC with WRITE_STRIP and READ_INSERT. Consequently it no longer makes sense to explicitly refer to the conversion in the protection operation. Update sd_dif and lpfc accordingly. Signed-off-by:
Ihab Hamadi <Ihab.Hamadi@Emulex.Com> Signed-off-by:
-
Hannes Reinecke authored
A target reset when I/O is ongoing might result an eventual device offline, as scsi_eh_completed_normally() might return ADD_TO_MLQUEUE in addition to the advertised SUCCESS, FAILED, and NEEDS_RETRY. Which is unfortunate as scsi_send_eh_cmnd() will therefore map ADD_TO_MLQUEUE to FAILED instead of the more appropriate NEEDS_RETRY. Signed-off-by:
Hannes Reinecke <hare@suse.de> Cc: Stable Tree <stable@kernel.org> Signed-off-by:
-
Christof Schmitt authored
Running sg_luns on s390x with CONFIG_DEBUG_PAGEALLOC enabled fails with EFAULT from the SG_IO ioctl. The EFAULT is the result from copy_to_user failing in this call chain: sg_ioctl sg_new_read sg_finish_rem_req blk_rq_unmap_user __blk_rq_unmap_user bio_uncopy_user __bio_copy_iov copy_to_user The sg driver calls sg_remove_scat to free the memory pages before calling blk_rq_unmap_user that tries to copy the data back to userspace. Change the order to first call blk_rq_unmap_user before freeing the pages in sg_remove_scat. Acked-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: stable@kernel.org Signed-off-by:
-
Tejun Heo authored
On certain cases, UDF disc doesn't report capacity correctly via READ_CAPACITY but TOC or trackinfo contains valid information which can be obtained using cdrom_get_last_written(). ide-cd considers both values and uses the larger one. Do the same in sr. This fixes bko#9668. http://bugzilla.kernel.org/show_bug.cgi?id=9668Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Milan Kocian <milan.kocian@wq.cz> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
-
Anil Veerabhadrappa authored
5706/5708/5709 devices allow driver/user to set page size. By default it is set to 4096. Current drivers do not program this register based on architecture type (e.g. x86 = 4K, IA64 = 16K) and by choice lets device use the defaults. So while mapping connection context memory (doorebll registers), driver has to match page size used by the device. Included change fixes the issue we uncovered during IA64 testing Signed-off-by:
Anil Veerabhadrappa <anilgv@broadcom.com> Signed-off-by:
-
HighPoint Linux Team authored
Most code changes were made to support RR44xx adapters. - add more PCI device ID. - using PCI BAR[2] to access RR44xx IOP. - using PCI BAR[0] to check and clear RR44xx IRQ. Signed-off-by:
HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by:
-
Moger, Babu authored
The function mode_select_handle_sense returns SCSI_DH_OK even when there is a sense code which is incorrect. Removing it so that it returns SCSI_DH_IO when there is sense that is not handled by this function. Signed-off-by:
Babu Moger <babu.moger@lsi.com> Reviewed-by:
Vijay Chauhan <vijay.chauhan@lsi.com> Reviewed-by:
Bob Stankey <Robert.stankey@lsi.com> Reviewed-by:
Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by:
-
Anil Ravindranath authored
1.Changed driver prints to use scmd_printk, sdev_printk 2.Changed dev_err calls to scmd_printk for scsi related print messages Signed-off-by:
Anil Ravindranath <anil_ravindranath@pmc-sierra.com> Signed-off-by:
-
Nick Cheng authored
This is support for Areca SAS/SATA HBA, ARC-1300/1320, which quipped with 88SE6440/88SE9480 respectively. Signed-off-by: Nick Cheng< nick.cheng@areca.com.tw > Cc: Ke Wei <kewei.mv@gmail.com> Signed-off-by:
-
- 30 Sep, 2009 6 commits
-
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Avoid spurious make includecheck message MIPS: VPE: Get rid of BKL. MIPS: VPE: Fix build after the credential changes a while ago. MIPS: Excite: Get rid of BKL. MIPS: Sibyte: Get rid of BKL. MIPS: BCM63xx: Add PCMCIA & Cardbus support. MIPS: MSP71xx: request_irq() failure ignored in msp_pcibios_config_access() MIPS: Decrease size of au1xxx_dbdma_pm_regs[][] MIPS: SMP: Inline arch_send_call_function_{single_ipi,ipi_mask} MIPS: SMP: Fix build. MIPS: MIPSxx SC: Avoid destructive invalidation on partial L2 cachelines. MIPS: Sibyte: Fix compilation error. MIPS: BCM1480: Re-apply patch lost due to bad resolution of merge conflict. MIPS: BCM63xx: Add serial driver for bcm63xx integrated UART. MIPS: Loongson2: Fix typo "enalbe" -> "enable" MIPS: SMTC: Remove duplicate structure field initialization MIPS: Remove duplicated #include MIPS: BCM63xx: Remove duplicated #include
-
Ralf Baechle authored
arch/mips/include/asm/unaligned.h: linux/unaligned/generic.h is included more than once. Entirely legitimate but just noise. Signed-off-by:Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
It's not obvious what good it was supposed to do here anyway. Signed-off-by: -
Ralf Baechle authored
Signed-off-by:
-
