- 26 Jul, 2013 29 commits
-
-
H Hartley Sweeten authored
The usbdux and usbduxsigma drivers are _very_ similar. For aesthetic reasons, rename the private data variables in this driver to match the names in the usbduxsigma driver so we can start sharing the common code. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the comedi_range_is_bipolar() helper instead of checking the 'range' index against a magic number. Also, use the s->maxdata to calculate the value needed to munge the value for bipolar data instead of the magic number. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetics, move this function closer to the (*auto_attach). Also, rename some of the defined constants that are used by the firmware upload. Signed-off-by:
-
H Hartley Sweeten authored
These defines are not used by the driver. Remove them. Signed-off-by:
-
H Hartley Sweeten authored
The endpoint defines are each only used in one place and don't help clarify the code. Remove the defines and just open code the values. Signed-off-by:
-
H Hartley Sweeten authored
Use the stop helpers instead of duplicating the code in the detach. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetic reasons, pass the comedi_device pointer to the unlink helpers instead of the private data pointer. All the unlink helpers simply call usb_kill_urb() to cancel any pending transfer requests. The usb passed to usb_kill_urb() can be NULL so the extra sanity check is not required. The unlink helpers will always return success so just make them void functions. Since the stop helpers will also always return success, make them void functions as well. Signed-off-by:
-
H Hartley Sweeten authored
Add the missing down/up of the semaphore to prevent other commands from being issued to the usb device while the pwn is being stopped. Rename the local variable used for the private data pointer to the comedi "norm". Use memset() to initialize the urb transfer buffer. Signed-off-by:
-
H Hartley Sweeten authored
Add the missing down/up of the semaphore to prevent other commands from being issued to the usb device while the pwn is being stopped. Rename the local variable used for the private data pointer to the comedi "norm". Make sure to check that usbdux_pwm_stop() was successful before sending command to the usb device to stop the pwm. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetic reasons, pass the comedi_device pointer to this function instead of the private data pointer. Rename the local variable used for the private data pointer to the comedi "norm". Remove the unnecessary sanity check of the private data pointer. This function can only be called is the private data was allocated during the attach. Signed-off-by:
-
H Hartley Sweeten authored
Comedi (*insn_write) operations are supposed to write insn->n values. Fix this function to work like the core expects. Rename the local variable used for the private data pointer to the comedi "norm". Remove the unnecessary sanity check of the private data pointer. This function can only be called is the private data was allocated during the attach. Signed-off-by:
-
H Hartley Sweeten authored
Comedi (*insn_read) operations are supposed to read and return insn->n values. Fix this function to work like the core expects. Rename the local variable used for the private data pointer to the comedi "norm". Remove the unnecessary sanity check of the private data pointer. This function can only be called is the private data was allocated during the attach. Tidy up the exit path using goto to ensure that the semaphore is released. Signed-off-by:
-
H Hartley Sweeten authored
Rename the local variable used for the private data pointer to the comedi "norm". Remove the unnecessary sanity check of the private data pointer. This function can only be called is the private data was allocated during the attach. Tidy up the exit path using goto to ensure that the semaphore is released. Signed-off-by:
-
H Hartley Sweeten authored
Tidy up this function a bit. Signed-off-by:
-
H Hartley Sweeten authored
Rename the local variable used for the private data pointer to the comedi "norm". Remove the unnecessary sanity check of the private data pointer. This function can only be called is the private data was allocated during the attach. Make sure an ao command is not already running and return -EBUSY. Tidy up the exit path using goto to ensure that the semaphore is released. Signed-off-by:
-
H Hartley Sweeten authored
Rename the local variable used for the private data pointer to the comedi "norm". Remove the unnecessary sanity check of the private data pointer. This function can only be called is the private data was allocated during the attach. Tidy up the exit path using goto to ensure that the semaphore is released. Return -EBUSY instead if an ao command is already running. Signed-off-by:
-
H Hartley Sweeten authored
Rename the local variable used for the private data pointer to the comedi "norm". Remove the unnecessary sanity check of the private data pointer. This function can only be called is the private data was allocated during the attach. Tidy up the exit path using goto to ensure that the semaphore is released. Return -EBUSY instead of 0 if the (*insn_write) cannot be done because a command is running. Tidy up the for() loop that writes the data. The dux_commands[1] and [4] can be set outside the loop since they are constant. Use a local pointer for dux_commands[2] to load the value to write. Only the last value needs to be cached in the private data for read back. Signed-off-by:
-
H Hartley Sweeten authored
Rename the local variable used for the private data pointer to the comedi "norm". Remove the unnecessary sanity check of the private data pointer. This function can only be called is the private data was allocated during the attach. Signed-off-by:
-
H Hartley Sweeten authored
Use the comedi_range_is_bipolar() helper instead of checking the 'range' index against a magic number. Also, use the s->maxdata to calculate the value needed to munge the value for bipolar data instead of the magic number. Signed-off-by:
-
H Hartley Sweeten authored
Rename the local variable used for the private data pointer to the comedi "norm". Remove the unnecessary sanity check of the private data pointer. This function can only be called is the private data was allocated during the attach. Tidy up the exit path using goto to ensure that the semaphore is released. Return -EBUSY instead of 0 if the (*insn_read) cannot be done because a command is running. Signed-off-by:
-
H Hartley Sweeten authored
Rename the local variable used for the private data pointer to the comedi "norm". Remove the unnecessary sanity check of the private data pointer. This function can only be called is the private data was allocated during the attach. Tidy up the exit path using goto to ensure that the semaphore is released. Signed-off-by:
-
H Hartley Sweeten authored
Rename the local variable used for the private data pointer to the comedi "norm". Remove the unnecessary sanity check of the private data pointer. This function can only be called is the private data was allocated during the attach. Tidy up the exit path using goto to ensure that the semaphore is released. Return -EBUSY if an ai command is already running. Signed-off-by:
-
H Hartley Sweeten authored
As pointed out by Ian Abbott, the *_cmd_running flags should be set before submitting the urbs. There is a possible race condition where an urb could complete and the flag is checked in the completion routine before it's set. Reported-by:
-
Wei Yongjun authored
A spin lock is taken here so we should use GFP_ATOMIC. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ian Abbott authored
The COMEDI_NI_ATMIO configuration option causes the "ni_atmio" module to be built, which handles various National Instruments ISA-PNP data acquisition cards. The configuration option currently depends on ISAPNP. The "ni_atmio" module is a "legacy" comedi driver with no auto-configuration support and it doesn't register as a PNP card driver. The only difference in initialization from the other comedi ISA card drivers is that it will use the ISA-PNP functions to find, attach and activate the card if no I/O base address has been specified by the user in the COMEDI_DEVCONFIG ioctl. The module compiles fine without the ISAPNP configuration option as the <linux/isapnp.h> and <linux/pnp.h> headers provide dummy inline functions if the ISAPNP and PNP options, respectively, are not enabled. Remove the dependancy on the ISAPNP option since the module builds without it and can be used without it. (There is a very slim chance that comedi will support proper ISA PNP drivers one day, in which case the ni_atmio driver could be converted to use this support and not support manual configuration. However, not all the PnP IDs of boards supported by this driver are currently known to us.) Signed-off-by:
-
Ian Abbott authored
The COMEDI_NI_ATMIO16D configuration option causes the "ni_atmio16d" module to be built, which handles the National Instruments AT-MIO-16 and AT-MIO-16D cards. The configuration option currently depends on ISAPNP, but the module doesn't use any ISAPNP functions and the cards are legacy ISA cards with base I/O port, IRQ and DMA channel configured by jumpers. (The driver doesn't use DMA though.) Remove the ISADNP dependancy from COMEDI_NI_ATMIO16D and fix up the help text - the card names are missing a dash and they're not ISA-PNP. Signed-off-by:
-
Shaun Laing authored
Resolves warnings from the "sparse" checker of the form "warning: cast to restricted __le??". Signed-off-by:
Shaun Laing <shaun@xresource.ca> Reviewed-by:
-
Eli Billauer authored
Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Eli Billauer <eli.billauer@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
As reported, this driver causes problems when built into the kernel, so force it to be a module until those issues are fixed. Also delete the "default n" lines in the Kconfig, as they are not needed. Reported-by:
-
- 25 Jul, 2013 11 commits
-
-
Eli Billauer authored
This is the driver for Xillybus, which is a general-purpose interface for data communication with FPGAs (programmable logic). Please refer to the README included in this patch for a detailed explanation. It was previously submitted for misc-devices, but it appears like noone's willing to review the code (which I can understand, given its magnitude). Hence submitted as a staging driver. Signed-off-by:
-
Rupesh Gujare authored
This patch fixes coding style issues reported by Dan here:- http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2012-June/027767.htmlReported-by:
Rupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by:
-
Malcolm Priestley authored
DBG_PORT80 is always defined as empty macro because VIAWET_DEBUG is never defined. Remove it and VIAWET_DEBUG. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
ASSERT is always defined as empty macro because VIAWET_DEBUG is never defined. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
Greg spotted that said driver is not subscribing to the automagic mechanism of auto-loading if a user tries to open /dev/zram. This fixes it. CC: Minchan Kim <minchan@kernel.org> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Jens Frederich authored
The resolution of msleep is related to HZ, so with HZ set to 100 any msleep of less then 10ms will become ~10ms. This is not what we want. Use usleep_range to get more control of what is happening here. Signed-off-by:
Jens Frederich <jfrederich@gmail.com> Signed-off-by:
-
Matthijs Kooijman authored
There was some code that cleared the dma_mask when dma was disabled in the driver. Given that clearing the mask doesn't actually tell the usb core we're not using dma, and a previous commit explicitely sets the hcd->self.uses_dma value, it seems these values are unneeded and can only potentially cause problems (when reloading a module, for example). Signed-off-by:
Matthijs Kooijman <matthijs@stdin.nl> Acked-by:
Paul Zimmerman <Paul.Zimmerman@synopsys.com> Signed-off-by:
-
Daniel Vetter authored
This thing seems to do some kind of delayed setup. Really, real kms drivers shouldn't do that at all. Either stuff needs to be dynamically hotplugged or the driver setup sequence needs to be fixed. This patch here just moves the setup at the very end of the driver load callback, with the locking adjusted accordingly. v2: Also move the corresponding put from ->lastclose to ->unload. Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Fabio Estevam authored
Add MODULE_ALIAS, so that auto module loading can work. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Fabio Estevam authored
clk_prepare_enable() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by:
-
Fabio Estevam authored
Instead of jumping to goto labels, just return the error code directly. Signed-off-by:
-
