into ppc970.osdl.org:/home/torvalds/v2.6/linux

This adds detailed documentation concerning how we map the Linux
page table structure onto the hardware tables on ARM.  In addition,
it also adds documentation describing how we emulate the "dirty"
and "young" or "accessed" page table bits.

This should be of interest to Linux MM developers.

From: William Lee Irwin III <wli@holomorphy.com>

rmk mentioned that ARM was borked as the relation, assumed by generic rmap,
PTRS_PER_PTE*sizeof(pte_t) == PAGE_SIZE, fails to hold.  The following
patch, developed jointly with him (or depending on POV, by him with me
acting as codemonkey), is reported to resolve the issue.

Specifically, while ARM dedicates an entire PAGE_SIZE -sized block of
memory to each PTE table, the PTE table itself only spans half that, the
remainder being dedicated to hardware-interpreted structures.  As the
hardware structure must be contiguous, wider ptes can't be used.  So the
core-visible PTE table only spans PAGE_SIZE/2 bytes, violating the
assumption.  This corrects masking and scaling done in ptep_to_address().

From: Dave Jones <davej@redhat.com>

From: Manfred Spraul <manfred@colorfullife.com>

Any user can delete any entries in a mqueue mounted filesystem.  The attached
patch prevents that.

- remove the writable test from mq_unlink.

- set the sticky bit in the root inode.  This affects both mq_unlink and
  sys_unlink: only the owner (and root) should be allowed to remove queues.

From: David Gibson <david@gibson.dropbear.id.au>

Some versions of follow_huge_addr() and follow_huge_pmd() are doing a
get_page() on the target page.  They shouldn't: follow_page() returns an
unpinned page and it is the caller's responsibility to pin the page (if
desired) before dropping page_table_lock.

From: David Gibson <david@gibson.dropbear.id.au>

Trivial cleanup to flush_hash_hugepage() in the ppc64 hugepage code.

From: Geert Uytterhoeven <geert@linux-m68k.org>

While compiling drivers/char/ipmi/ipmi_si_intf.c in 2.6.6-rc1 on m68k, I
noticed a missing include (needed for disable_irq_nosync() and enable_irq())

From: "Randy.Dunlap" <rddunlap@osdl.org>

floppy98.c (along with other PC-9800 files) has not been updated lately.  It
won't build currently (2.6.5).

This patch makes floppy98 build cleanly.

From: Chris Mason <mason@suse.com>

Get rid of the last sleep_on in the reiserfs code

From: Chris Mason <mason@suse.com>

Updates the reiserfs-logging improvements to use schedule_timeout instead of
yield when letting the transaction grow a little before forcing a commit for
fsync/O_SYNC/O_DIRECT.

Also, when one process forces a transaction to end and plans on doing the
commit (like fsync), it sets a flag on the transaction so the journal code
knows not to bother kicking the journal work queue.

queue_delayed_work is used so that if we get a bunch of tiny transactions
ended quickly, we aren't constantly kicking the work queue.

These significantly improve reiserfs performance during fsync heavy
workloads.

From: Bart Samwel <bart@samwel.tk>

Add support for value 0 to the commit option of reiserfs.  Means "restore
to the default value".  For the maximum commit age, this default value is
normally read from the journal; this patch adds an extra variable to cache
the default value for the maximum commit age.

From: David Gibson <david@gibson.dropbear.id.au>

This is a small cleanup to the PPC64 hugepage code.  It removes an
unhelpful function, removing some studlyCaps in the process.  It was
originally this way to match the normal page path, but that has all been
rewritten since.

From: Jakub Jelinek <jakub@redhat.com>

The first change removes just a useless put_user (si_int and si_ptr are
part of the same union, si_ptr is on all arches covering whole union), the
rest is fixes for signal handling of SI_MESGQ.

From: Jeff Garzik <jgarzik@pobox.com>

It was debug code, no longer required.

From: Bjorn Helgaas <bjorn.helgaas@hp.com>

This consolidates the PCI MSI configuration into drivers/pci/Kconfig,
removing it from the i386, x86_64, and ia64 Kconfig.

It also changes the default for ia64 from "y" to "n".  The default on i386
is "n" already, and I'm not sure why ia64 should be different.

From: Jeff Garzik <jgarzik@pobox.com>

Nobody ever checks the return value of submit_bh(), and submit_bh() is the
only caller that checks the submit_bio() return value.

This changes the kernel I/O submission path -- a fast path -- so this
cleanup is also a microoptimization.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: "J. Bruce Fields" <bfields@fieldses.org>

From: Andros: Implement server-side reboot recovery (server now handles
open and lock reclaims).  Not completely to spec: we don't yet store the
state in stable storage that would be required to recover correctly in
certain situations.

From: NeilBrown <neilb@cse.unsw.edu.au>

The credentials (uid/gid) of a process are set when a filehandle is
verified.  Nfsv4 allows requests without an explicit filehandle (instead,
an implicit 'root' filehandle) so we much make sure the credentials are set
for these requests too.

From: "J. Bruce Fields" <bfields@fieldses.org>

From: Andros: added a call to nfsd_setuser in nfsd4_putrootfh so that nfsd
runs as the rpc->cred user.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: "J. Bruce Fields" <bfields@fieldses.org>

From: Andros: Hold state_lock longer so the stateowner doesn't diseappear
out from under us before we get the chance to encode the replay.  Don't
attempt to save replay if we failed to find a stateowner.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: "J. Bruce Fields" <bfields@fieldses.org>

From: Andros: locku replies should be saved for possible replay as well.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: "J. Bruce Fields" <bfields@fieldses.org>

From: Andros: Idea is to keep around a list of openowners recently released
by closes, and make sure they stay around long enough so that replays still
work.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: "J. Bruce Fields" <bfields@fieldses.org>

Error return when the client supplies a bad service should be badcred.

From: NeilBrown <neilb@cse.unsw.edu.au>

From: "J. Bruce Fields" <bfields@fieldses.org>

Fix out-of-spec errors in nfs4 readdir.  Add checks for bad cookie values.

(plus compile fix from akpm)

From: Kevin Corry <kevcorry@us.ibm.com>

Striped: Use an EMIT macro in the status function.

From: Kevin Corry <kevcorry@us.ibm.com>

dm-ioctl.c::retrieve_status(): Prevent overrunning the ioctl buffer by making
sure we don't call the target status routine with a buffer size limit of
zero.  [Kevin Corry, Alasdair Kergon]

From: Kevin Corry <kevcorry@us.ibm.com>

Clarify the comment regarding the "next" field in struct dm_target_spec.  The
"next" field has different behavior if you're performing a DM_TABLE_STATUS
command than it does if you're performing a DM_TABLE_LOAD command.

See populate_table() and retrieve_status() in drivers/md/dm-ioctl.c for more
details on how this field is used.

From: Kevin Corry <kevcorry@us.ibm.com>

Correctly align the dm_target_spec structures during retrieve_status().

From: Kevin Corry <kevcorry@us.ibm.com>

Log an error if the target has unknown target type, or zero length.

From: Kevin Corry <kevcorry@us.ibm.com>

dm.c: Use wake_up() rather than wake_up_interruptible() with the eventq.

From: Kevin Corry <kevcorry@us.ibm.com>

Handle interrupts within suspend.

From: Kevin Corry <kevcorry@us.ibm.com>

Check the uptodate flag in sub-bios to see if there was an error.  [Mike
Christie]

From: Kevin Corry <kevcorry@us.ibm.com>

Fix 64/32 bit ioctl problems.

The recent controlling terminal changes broke exec from multithreaded
application because de_thread was not upgraded to new arrangement.  I
know that I should not have LD_PRELOAD library which automatically
creates one thread, but it looked like a cool solution to the problem I
had.

de_thread must initialize the controlling terminal information in the
new thread group.

The just merged openpromfs remount patch contains a silly typo in the
field of the super_operations structure.

Fixed like this.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux