- 25 Apr, 2018 4 commits
-
-
Harry Wentland authored
We shouldn't attempt to read EDID in atomic_check. We really shouldn't even be modifying the connector object, or any other non-state object, but this is a start at least. Moving EDID cleanup to dm_dp_mst_connector_destroy from dm_dp_destroy_mst_connector to ensure the EDID is still available for headless mode. Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Harry Wentland authored
The below commit "drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2" introduces a slight behavioral change to rmfb. Instead of disabling a crtc when the primary plane is disabled, it now preserves it. Since DC is currently not equipped to handle this we need to fail such a commit, otherwise we might see a corrupted screen. This is based on Shirish's previous approach but avoids adding all planes to the new atomic state which leads to a full update in DC for any commit, and is not what we intend. Theoretically DM should be able to deal with states with fully populated planes, even for simple updates, such as cursor updates. This should still be addressed in the future. Signed-off-by:Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
-
Mikita Lipski authored
Lock irq table when reading a work in queue, unlock to flush the work, lock again till all tasks are cleared Signed-off-by:
Mikita Lipski <mikita.lipski@amd.com> Reviewed-by:
-
Nicolai Hähnle authored
Otherwise, the SQ may skip some of the register writes, or shader waves may be allocated where we don't expect them, so that as a result we don't actually reset all of the register SRAMs. This can lead to spurious ECC errors later on if a shader uses an uninitialized register. Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by:
-
- 22 Apr, 2018 4 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
- Fix a dark screen issue in DC - Fix clk/voltage dependency tracking for wattman - Update SMU interface for vega12 * 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: drm/amd/powerplay: header file interface to SMU update drm/amd/pp: Fix bug voltage can't be OD separately on VI drm/amd/display: Don't program bypass on linear regamma LUT
-
Dave Airlie authored
Merge tag 'exynos-drm-fixes-for-v4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Remove Exynos specific framebuffer structure and relevant functions. - it removes exynos_drm_fb structure which is a wrapper of drm_framebuffer and unnecessary two exynos specific callback functions, exynos_drm_destory() and exynos_drm_fb_create_handle() because we can reuse existing drm common callback ones instead. * tag 'exynos-drm-fixes-for-v4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: exynos_drm_fb -> drm_framebuffer drm/exynos: Move dma_addr out of exynos_drm_fb drm/exynos: Move GEM BOs to drm_framebuffer drm/amdkfd: Deallocate SDMA queues correctly drm/amdkfd: Fix scratch memory with HWS enabled
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2018-04-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Fix for FDO #105549: Avoid OOPS on bad VBT (Jani) - Fix rare pre-emption race (Chris) - Fix RC6 race against PM transitions (Tvrtko) * tag 'drm-intel-next-fixes-2018-04-19' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915/audio: Fix audio detection issue on GLK drm/i915: Call i915_perf_fini() on init_hw error unwind drm/i915/bios: filter out invalid DDC pins from VBT child devices drm/i915/pmu: Inspect runtime PM state more carefully while estimating RC6 drm/i915: Do no use kfree() to free a kmem_cache_alloc() return value drm/i915/execlists: Clear user-active flag on preemption completion drm/i915/gvt: Add drm_format_mod update drm/i915/gvt: Disable primary/sprite/cursor plane at virtual display initialization drm/i915/gvt: Delete redundant error message in fb_decode.c drm/i915/gvt: Cancel dma map when resetting ggtt entries drm/i915/gvt: Missed to cancel dma map for ggtt entries drm/i915/gvt: Make MI_USER_INTERRUPT nop in cmd parser drm/i915/gvt: Mark expected switch fall-through in handle_g2v_notification drm/i915/gvt: throw error on unhandled vfio ioctls
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-fixes: stable: vc4: Fix memory leak during BO teardown (Daniel) dp: Add i2c retry for LSPCON adapters (Imre) hdcp: Fix device count mask (Ramalingam) Cc: Daniel J Blueman <daniel@quora.org Cc: Imre Deak <imre.deak@intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> * tag 'drm-misc-fixes-2018-04-18-1' of git://anongit.freedesktop.org/drm/drm-misc: drm/i915: Fix LSPCON TMDS output buffer enabling from low-power state drm: Fix HDCP downstream dev count read drm/vc4: Fix memory leak during BO teardown
-
- 19 Apr, 2018 3 commits
-
-
Kenneth Feng authored
update vega12 smu interface. Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Rex Zhu authored
Make sure to update the MCLK and SCLK flags when setting the VDDC flags due to dependencies. Reviewed-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
-
Harry Wentland authored
Even though this is required for degamma since DCE HW only supports a couple predefined LUTs we can just program the LUT directly for regamma. This fixes dark screens which occurs when we program regamma to bypass while degamma is using srgb LUT. Signed-off-by:
Leo Li <sunpeng.li@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- 18 Apr, 2018 6 commits
-
-
Imre Deak authored
LSPCON adapters in low-power state may ignore the first I2C write during TMDS output buffer enabling, resulting in a blank screen even with an otherwise enabled pipe. Fix this by reading back and validating the written value a few times. The problem was noticed on GLK machines with an onboard LSPCON adapter after entering/exiting DC5 power state. Doing an I2C read of the adapter ID as the first transaction - instead of the I2C write to enable the TMDS buffers - returns the correct value. Based on this we assume that the transaction itself is sent properly, it's only the adapter that is not ready for some reason to accept this first write after waking from low-power state. In my case the second I2C write attempt always succeeded. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105854 Cc: Clinton Taylor <clinton.a.taylor@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180416155309.11100-1-imre.deak@intel.com
-
Gaurav K Singh authored
On Geminilake, sometimes audio card is not getting detected after reboot. This is a spurious issue happening on Geminilake. HW codec and HD audio controller link was going out of sync for which there was a fix in i915 driver but was not getting invoked for GLK. Extending this fix to GLK as well. Tested by Du,Wenkai on GLK board. Bspec: 21829 v2: Instead of checking GEN9_BC, BXT and GLK macros, use IS_GEN9 macro (Jani N) Cc: <stable@vger.kernel.org> # b651bd2a ("drm/i915/audio: Fix audio enumeration issue on BXT") Cc: <stable@vger.kernel.org> Signed-off-by:
Gaurav K Singh <gaurav.k.singh@intel.com> Reviewed-by:
Abhay Kumar <abhay.Kumar@intel.com> Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
We have to cleanup after i915_perf_init(), even on the error path, as it passes a pointer into the module to the sysfs core. If we fail to unregister the sysctl table, we leave a dangling pointer which then may explode anytime later. Fixes: 9f9b2792 ("drm/i915/perf: reuse timestamp frequency from device info") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180414091233.32224-1-chris@chris-wilson.co.uk (cherry picked from commit 9f172f6f) Signed-off-by:
-
Jani Nikula authored
The VBT contains the DDC pin to use for specific ports. Alas, sometimes the field appears to contain bogus data, and while we check for it later on in intel_gmbus_get_adapter() we fail to check the returned NULL on errors. Oops results. The simplest approach seems to be to catch and ignore the bogus DDC pins already at the VBT parsing phase, reverting to fixed per port default pins. This doesn't guarantee display working, but at least it prevents the oops. And we continue to be fuzzed by VBT. One affected machine is Dell Latitude 5590 where a BIOS upgrade added invalid DDC pins. Typical backtrace: [ 35.461411] WARN_ON(!intel_gmbus_is_valid_pin(dev_priv, pin)) [ 35.461432] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915] [ 35.461437] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx [ 35.461445] CPU: 6 PID: 411 Comm: kworker/u16:2 Not tainted 4.16.0-rc7.x64-g1cda370ffded #1 [ 35.461447] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018 [ 35.461450] Workqueue: events_unbound async_run_entry_fn [ 35.461465] RIP: 0010:intel_gmbus_get_adapter+0x32/0x37 [i915] [ 35.461467] RSP: 0018:ffff9b4e43d47c40 EFLAGS: 00010286 [ 35.461469] RAX: 0000000000000000 RBX: ffff98f90639f800 RCX: ffffffffae051960 [ 35.461471] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000246 [ 35.461472] RBP: ffff98f905410000 R08: 0000004d062a83f6 R09: 00000000000003bd [ 35.461474] R10: 0000000000000031 R11: ffffffffad4eda58 R12: ffff98f905410000 [ 35.461475] R13: ffff98f9064c1000 R14: ffff9b4e43d47cf0 R15: ffff98f905410000 [ 35.461477] FS: 0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000 [ 35.461479] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.461481] CR2: 00007f5682359008 CR3: 00000001b700c005 CR4: 00000000003606e0 [ 35.461483] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.461484] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.461486] Call Trace: [ 35.461501] intel_hdmi_set_edid+0x37/0x27f [i915] [ 35.461515] intel_hdmi_detect+0x7c/0x97 [i915] [ 35.461518] drm_helper_probe_single_connector_modes+0xe1/0x6c0 [ 35.461521] drm_setup_crtcs+0x129/0xa6a [ 35.461523] ? __switch_to_asm+0x34/0x70 [ 35.461525] ? __switch_to_asm+0x34/0x70 [ 35.461527] ? __switch_to_asm+0x40/0x70 [ 35.461528] ? __switch_to_asm+0x34/0x70 [ 35.461529] ? __switch_to_asm+0x40/0x70 [ 35.461531] ? __switch_to_asm+0x34/0x70 [ 35.461532] ? __switch_to_asm+0x40/0x70 [ 35.461534] ? __switch_to_asm+0x34/0x70 [ 35.461536] __drm_fb_helper_initial_config_and_unlock+0x34/0x46f [ 35.461538] ? __switch_to_asm+0x40/0x70 [ 35.461541] ? _cond_resched+0x10/0x33 [ 35.461557] intel_fbdev_initial_config+0xf/0x1c [i915] [ 35.461560] async_run_entry_fn+0x2e/0xf5 [ 35.461563] process_one_work+0x15b/0x364 [ 35.461565] worker_thread+0x2c/0x3a0 [ 35.461567] ? process_one_work+0x364/0x364 [ 35.461568] kthread+0x10c/0x122 [ 35.461570] ? _kthread_create_on_node+0x5d/0x5d [ 35.461572] ret_from_fork+0x35/0x40 [ 35.461574] Code: 74 16 89 f6 48 8d 04 b6 48 c1 e0 05 48 29 f0 48 8d 84 c7 e8 11 00 00 c3 48 c7 c6 b0 19 1e c0 48 c7 c7 64 8a 1c c0 e8 47 88 ed ec <0f> 0b 31 c0 c3 8b 87 a4 04 00 00 80 e4 fc 09 c6 89 b7 a4 04 00 [ 35.461604] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915] [ 35.461606] ---[ end trace 4fe1e63e2dd93373 ]--- [ 35.461609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 35.461613] IP: i2c_transfer+0x4/0x86 [ 35.461614] PGD 0 P4D 0 [ 35.461616] Oops: 0000 [#1] SMP PTI [ 35.461618] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx [ 35.461624] CPU: 6 PID: 411 Comm: kworker/u16:2 Tainted: G W 4.16.0-rc7.x64-g1cda370ffded #1 [ 35.461625] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018 [ 35.461628] Workqueue: events_unbound async_run_entry_fn [ 35.461630] RIP: 0010:i2c_transfer+0x4/0x86 [ 35.461631] RSP: 0018:ffff9b4e43d47b30 EFLAGS: 00010246 [ 35.461633] RAX: ffff9b4e43d47b6e RBX: 0000000000000005 RCX: 0000000000000001 [ 35.461635] RDX: 0000000000000002 RSI: ffff9b4e43d47b80 RDI: 0000000000000000 [ 35.461636] RBP: ffff9b4e43d47bd8 R08: 0000004d062a83f6 R09: 00000000000003bd [ 35.461638] R10: 0000000000000031 R11: ffffffffad4eda58 R12: 0000000000000002 [ 35.461639] R13: 0000000000000001 R14: ffff9b4e43d47b6f R15: ffff9b4e43d47c07 [ 35.461641] FS: 0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000 [ 35.461643] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.461645] CR2: 0000000000000010 CR3: 00000001b700c005 CR4: 00000000003606e0 [ 35.461646] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.461647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.461649] Call Trace: [ 35.461652] drm_do_probe_ddc_edid+0xb3/0x128 [ 35.461654] drm_get_edid+0xe5/0x38d [ 35.461669] intel_hdmi_set_edid+0x45/0x27f [i915] [ 35.461684] intel_hdmi_detect+0x7c/0x97 [i915] [ 35.461687] drm_helper_probe_single_connector_modes+0xe1/0x6c0 [ 35.461689] drm_setup_crtcs+0x129/0xa6a [ 35.461691] ? __switch_to_asm+0x34/0x70 [ 35.461693] ? __switch_to_asm+0x34/0x70 [ 35.461694] ? __switch_to_asm+0x40/0x70 [ 35.461696] ? __switch_to_asm+0x34/0x70 [ 35.461697] ? __switch_to_asm+0x40/0x70 [ 35.461698] ? __switch_to_asm+0x34/0x70 [ 35.461700] ? __switch_to_asm+0x40/0x70 [ 35.461701] ? __switch_to_asm+0x34/0x70 [ 35.461703] __drm_fb_helper_initial_config_and_unlock+0x34/0x46f [ 35.461705] ? __switch_to_asm+0x40/0x70 [ 35.461707] ? _cond_resched+0x10/0x33 [ 35.461724] intel_fbdev_initial_config+0xf/0x1c [i915] [ 35.461727] async_run_entry_fn+0x2e/0xf5 [ 35.461729] process_one_work+0x15b/0x364 [ 35.461731] worker_thread+0x2c/0x3a0 [ 35.461733] ? process_one_work+0x364/0x364 [ 35.461734] kthread+0x10c/0x122 [ 35.461736] ? _kthread_create_on_node+0x5d/0x5d [ 35.461738] ret_from_fork+0x35/0x40 [ 35.461739] Code: 5c fa e1 ad 48 89 df e8 ea fb ff ff e9 2a ff ff ff 0f 1f 44 00 00 31 c0 e9 43 fd ff ff 31 c0 45 31 e4 e9 c5 fd ff ff 41 54 55 53 <48> 8b 47 10 48 83 78 10 00 74 70 41 89 d4 48 89 f5 48 89 fb 65 [ 35.461756] RIP: i2c_transfer+0x4/0x86 RSP: ffff9b4e43d47b30 [ 35.461757] CR2: 0000000000000010 [ 35.461759] ---[ end trace 4fe1e63e2dd93374 ]--- Based on a patch by Fei Li. v2: s/reverting/sticking/ (Chris) Cc: stable@vger.kernel.org Cc: Fei Li <fei.li@intel.com> Co-developed-by:
Fei Li <fei.li@intel.com> Reported-by:
Pavel Nakonechnyi <zorg1331@gmail.com> Reported-and-tested-by:
Seweryn Kokot <sewkokot@gmail.com> Reported-and-tested-by:
Laszlo Valko <valko@linux.karinthy.hu> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105549 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105961Reviewed-by:
-
Tvrtko Ursulin authored
While thinking about sporadic failures of perf_pmu/rc6-runtime-pm* tests on some CI machines I have concluded that: a) the PMU readout of RC6 can race against runtime PM transitions, and b) there are other reasons than being runtime suspended which can cause intel_runtime_pm_get_if_in_use to fail. Therefore when estimating RC6 the code needs to assert we are indeed in suspended state, and if not, the best we can do is return the last known RC6 value. Without this check we can calculate the estimated value based on un- initialized or inappropriate internal state, which can result in over- estimation, or in any case incorrect value being returned. v2: * Re-arrange the code a bit to avoid second unlock and return branch. (Chris Wilson) v3: * Insert some strategic blank lines and improve commit msg. (Chris Wilson) Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 1fe699e3 ("drm/i915/pmu: Fix sleep under atomic in RC6 readout") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105010 Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Xidong Wang authored
Along the eb_lookup_vmas() error path, the return value from kmem_cache_alloc() was freed using kfree(). Fix it to use the proper kmem_cache_free() instead. Fixes: d1b48c1e ("drm/i915: Replace execbuf vma ht with an idr") Signed-off-by:
Xidong Wang <wangxidong_97@163.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v4.14+ Reviewed-by:
-
- 17 Apr, 2018 3 commits
-
-
Daniel Stone authored
Now exynos_drm_fb is just an empty wrapper around drm_framebuffer, we can drop it. Signed-off-by:
Daniel Stone <daniels@collabora.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
-
Daniel Stone authored
This can be calculated from the GEM BO DMA address as well as the offset stored in the base framebuffer. Signed-off-by:
-
Daniel Stone authored
Since drm_framebuffer can now store GEM objects directly, place them there rather than in our own subclass. As this makes the framebuffer create_handle and destroy functions the same as the GEM framebuffer helper, we can reuse those. Signed-off-by:
-
- 16 Apr, 2018 2 commits
-
-
Ramalingam C authored
In both HDMI and DP, device count is represented by 6:0 bits of a register(BInfo/Bstatus) So macro for bitmasking the device_count is fixed(0x3F->0x7F). v3: Retained the Rb-ed. v4: %s/drm\/i915/drm [rodrigo] v5: Added "Fixes:" and HDCP keyword in subject [Rodrigo, Sean Paul] Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Fixes: 495eb7f8 drm: Add some HDCP related #defines cc: Sean Paul <seanpaul@chromium.org> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Sean Paul authored
Fast forwarding -fixes for 4.17. Signed-off-by:
-
- 12 Apr, 2018 7 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
- Add a PX quirk for radeon - Fix flickering and stability issues with DC on some platforms - Fix HDMI audio regression - Few other misc DC and base driver fixes * 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: Revert "drm/amd/display: disable CRTCs with NULL FB on their primary plane (V2)" Revert "drm/amd/display: fix dereferencing possible ERR_PTR()" drm/amd/display: Fix regamma not affecting full-intensity color values drm/amd/display: Fix FBC text console corruption drm/amd/display: Only register backlight device if embedded panel connected drm/amd/display: fix brightness level after resume from suspend drm/amd/display: HDMI has no sound after Panel power off/on drm/amdgpu: add MP1 and THM hw ip base reg offset drm/amdgpu: fix null pointer panic with direct fw loading on gpu reset drm/radeon: add PX quirk for Asus K73TK
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2018-04-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-next omap: Fix crash on AM4 EVM, and all OMAP2/3 boards (Tomi) Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> * tag 'drm-misc-next-fixes-2018-04-11' of git://anongit.freedesktop.org/drm/drm-misc: drm/omap: fix crash if there's no video PLL
-
Harry Wentland authored
This seems to cause flickering and lock-ups for a wide range of users. Revert until we've found a proper fix for the flickering and lock-ups. This reverts commit 36cc549d. Cc: Shirish S <shirish.s@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
-
Harry Wentland authored
This reverts commit cd2d6c92. Cc: Shirish S <shirish.s@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
-
Leo (Sunpeng) Li authored
Hardware understands the regamma LUT as a piecewise linear function, with points spaced exponentially along the range. We previously programmed the LUT for range [2^-10, 2^0). This causes (normalized) color values of 1 (=2^0) to miss the programmed LUT, and fall onto the end region. For DCE, the end region is extrapolated using a single (base, slope) pair, using the max y-value from the last point in the curve as base. This presents a problem, since this value affects all three color channels. Scaling down the intensity of say - the blue regamma curve - will not affect it's end region. This is especially noticiable when using RedShift. It scales down the blue and green channels, but leaves full-intensity colors unshifted. Therefore, extend the range to cover [2^-10, 2^1) by programming another hardware segment, containing only one point. That way, we won't be hitting the end region. Note that things are a bit different for DCN, since the end region can be set per-channel. Signed-off-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by:
-
Roman Li authored
Signed-off-by:
Roman Li <roman.li@amd.com> Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
-
Harry Wentland authored
Signed-off-by:
-
- 11 Apr, 2018 5 commits
-
-
Roman Li authored
Adding missing call to cache current backlight values. Otherwise the brightness resets to default value on resume. Signed-off-by:
-
Charlene Liu authored
Signed-off-by:
-
Evan Quan authored
Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
Huang Rui authored
When system uses fw direct loading, then psp context structure won't be initiliazed. And it is also unable to execute mode reset. [ 434.601474] amdgpu 0000:0c:00.0: GPU reset begin! [ 434.694326] amdgpu 0000:0c:00.0: GPU reset [ 434.743152] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 [ 434.838474] IP: psp_gpu_reset+0xc/0x30 [amdgpu] [ 434.893532] PGD 406ed9067 [ 434.893533] P4D 406ed9067 [ 434.926376] PUD 400b46067 [ 434.959217] PMD 0 [ 435.033379] Oops: 0000 [#1] SMP [ 435.072573] Modules linked in: amdgpu(OE) chash(OE) gpu_sched(OE) ttm(OE) drm_kms_helper(OE) drm(OE) fb_sys_fops syscopyarea sysfillrect sysimgblt rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm edac_mce_amd snd_seq_midi snd_seq_midi_event kvm_amd snd_rawmidi kvm irqbypass crct10dif_pclmul crc32_pclmul snd_seq ghash_clmulni_intel snd_seq_device pcbc snd_timer eeepc_wmi aesni_intel snd asus_wmi aes_x86_64 sparse_keymap crypto_simd glue_helper joydev soundcore wmi_bmof cryptd video i2c_piix4 shpchp 8250_dw i2c_designware_platform mac_hid i2c_designware_core sunrpc parport_pc ppdev lp parport autofs4 hid_generic igb usbhid dca ptp mxm_wmi pps_core ahci hid i2c_algo_bit [ 435.931754] libahci wmi Signed-off-by:
-
Nico Sneck authored
With this the dGPU turns on correctly. Signed-off-by:
Nico Sneck <nicosneck@hotmail.com> Signed-off-by:
-
- 10 Apr, 2018 2 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
A few fixes for 4.17: - Fix a potential use after free in a error case - Fix pcie lane handling in amdgpu SI dpm - sdma pipeline sync fix - A few vega12 cleanups and fixes - Misc other fixes * 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: Fix memory leaks at amdgpu_init() error path drm/amdgpu: Fix PCIe lane width calculation drm/radeon: Fix PCIe lane width calculation drm/amdgpu/si: implement get/set pcie_lanes asic callback drm/amdgpu: Add support for SRBM selection v3 Revert "drm/amdgpu: Don't change preferred domian when fallback GTT v5" drm/amd/powerply: fix power reading on Fiji drm/amd/powerplay: Enable ACG SS feature drm/amdgpu/sdma: fix mask in emit_pipeline_sync drm/amdgpu: Fix KIQ hang on bare metal for device unbind/bind back v2. drm/amd/pp: Clean header file in vega12_smumgr.c drm/amd/pp: Remove Dead functions on Vega12 drm/amd/pp: silence a static checker warning drm/amdgpu: drop compute ring timeout setting for non-sriov only (v2) drm/amdgpu: fix typo of domain fallback
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2018-04-04' of git://anongit.freedesktop.org/drm/drm-misc into drm-next hda_intel: Don't declare azx PM ops if VGA_SWITCHEROO configured (Lukas) Cc: Lukas Wunner <lukas@wunner.de> Cc: Takashi Iwai <tiwai@suse.de> * tag 'drm-misc-next-fixes-2018-04-04' of git://anongit.freedesktop.org/drm/drm-misc: ALSA: hda - Silence PM ops build warning
-
- 09 Apr, 2018 1 commit
-
-
Daniel J Blueman authored
During BO teardown, an indirect list 'uniform_addr_offsets' wasn't being freed leading to leaking many 128B allocations. Fix the memory leak by releasing it at teardown time. Cc: stable@vger.kernel.org Fixes: 6d45c81d ("drm/vc4: Add support for branching in shader validation.") Signed-off-by:
Daniel J Blueman <daniel@quora.org> Signed-off-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
-
- 05 Apr, 2018 1 commit
-
-
Tomi Valkeinen authored
Commit 8a7eda76 ("drm: omapdrm: dispc: Pass DISPC pointer to remaining dispc API functions") made dpi.c use ctx->pll even when there's no PLL, causing a crash at modeset on AM4 EVM, and presumably all OMAP2/3 boards. Fix this by having struct dpi_data pointer in the ctx instead, giving access to dispc without going through the pll. Fixes: 8a7eda76 ("drm: omapdrm: dispc: Pass DISPC pointer to remaining dispc API functions") Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by:
Keerthy <j-keerthy@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180405065537.29818-1-tomi.valkeinen@ti.com
-
- 04 Apr, 2018 2 commits
-
-
Chris Wilson authored
When cancelling the requests and clearing out the ports following a successful preemption completion, also clear the active flag. I had assumed that all preemptions would be followed by an immediate dequeue (preserving the active user flag), but under rare circumstances we may be triggering a preemption for the second port only for it to have completed before the preemotion kicks in; leaving execlists->active set even though the system is now idle. We can clear the flag inside the common execlists_cancel_port_requests() as the other users also expect the semantics of active being cleared. Fixes: f6322edd ("drm/i915/preemption: Allow preemption between submission ports") Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180324125829.27026-1-chris@chris-wilson.co.uk (cherry picked from commit eed7ec52) Signed-off-by:
-
https://github.com/intel/gvt-linuxJoonas Lahtinen authored
gvt-fixes-2018-04-03 - fix unhandled vfio ioctl return value (Gerd) - no-op user interrupt for vGPU (Zhipeng) - fix ggtt dma unmap (Changbin) - fix warning in fb decoder (Xiong) - dmabuf drm_format_mod fix (Tina) - misc cleanup Signed-off-by:
-
